support@Free-Braindumps.com
Register Login
Cisco
CompTIA
ISC
EC-Council
EXIN
Fortinet
ITIL
Juniper
Microsoft
VMware
Avaya
SAP
Google
NVIDIA
Salesforce
Amazon
Palo Alto Networks
ISC2
CrowdStrike
Anthropic
All Vendors
  1. Home
  2. Exams
  3. Huawei
  4. H12-311

Free H12-311 Exam Braindumps
HCIA-WLAN V2.0 Questions 146–150 (page: 31)

Updated On: 10-Feb-2026
Page 31 of 61
PDF with 299 Questions

Each AC device needs to specify the source IP address of the AC to establish a CAPWAP tunnel with the AP. One AC can specify up to two WLAN source IP addresses.

  1. True
  2. False

Answer(s): B



According to the following configuration example, the following statement is correct.

[AC] dhcp enable
[AC] interface VLANif100
[AC-VLANif100] ip address 10.1.100.1 24 [AC-VLANif100] dhcp select interface [AC-VLANif100] quit

  1. The DHCP service is enabled by default in the global mode, so the dhcp enable can be configured. The
  2. dhcp select interface command enables the DHCP client function on the interface of VLAN 100.
  3. If VLAN 100 is a user VLAN, the gateway is 10.1.100.1 and the mask is 255.255.255.0 after the user receives the address.
  4. If VLAN 100 is the management VLAN where the AP is located, the option 43 field in the DHCP message received by the AP should be 10.1.100.1.

Answer(s): C



If not configured, what is the default authentication method supported by the AP?

  1. mac-auth
  2. sn-auth
  3. no-auth
  4. mac-sn-auth

Answer(s): A



If you want to create an open authentication security template, the following correct configuration is.

  1. AC-WLAN-view] security-profile name security-1 id 1
    [AC-WLAN-sec-prof-security-1] open authentication-method open-system [AC-WLAN-sec-prof-security-1] security-policy open
    [AC-WLAN-sec-prof-security-1] quit
  2. AC-WLAN-view] security-profile name security-1 id 1
    [AC-WLAN-sec-prof-security-1] wep authentication-method open-system [AC-WLAN-sec-prof-security-1] security-policy wep
    [AC-WLAN-sec-prof-security-1] quit
  3. AC-WLAN-view] security-profile name security-1 id 1
    [AC-WLAN-sec-prof-security-1] wpa authentication-method open-system [AC-WLAN-sec-prof-security-1] security-policy wpa
    [AC-WLAN-sec-prof-security-1] quit
  4. AC-WLAN-view] security-profile name security-1 id 1
    [AC-WLAN-sec-prof-security-1] wpa2 authentication-method open-system [AC-WLAN-sec-prof-security-1] security-policy wpa2
    [AC-WLAN-sec-prof-security-1] quit

Answer(s): B



When only one interface of the AC is connected to the aggregation layer switch, the user traffic is directly transmitted through the aggregation switch to the public network.

  1. Side-by-side mode + tunnel forwarding
  2. Side-by-side mode + direct forwarding
  3. Direct connection mode + tunnel forwarding
  4. Direct connection mode + direct forwarding

Answer(s): B



  PDF
Viewing page 31 of 61
Viewing questions 151 - 155 out of 299 questions


Post your Comments and Discuss Huawei H12-311 exam prep with other Community members:

AI Tutor AI Tutor 👋 I’m here to help!