Free H12-351 Exam Braindumps
HCIE-WLAN (Written) V1.0 Questions 16–20 (page: 5)

Updated On: 10-Feb-2026

As shown in the figure, STA_1 through STA_4 are associated with AP_1, and STA_5 is associated with AP_2. Assuming that the load balancing threshold is 2, the load difference threshold is 25%, and API and AP2 support a maximum of 10 STAs, which of the following statements are true? (Select All that Apply)

  1. The load percentage of AP_1 is 40%, and that of AP_2 is 10%.
  2. The load balancing mechanism needs to be enabled. Then some STAs are steered from AP_1 to AP__2.
  3. If load balancing is performed, the load percentage of AP_1 changes to 30%.
  4. The minimum load percentage is 10%, which is greater than the load difference threshold.
    Therefore, load balancing needs to be enabled.

Answer(s): A,B

Explanation:

The load percentage of an AP is calculated by dividing the number of associated STAs by the maximum number of STAs supported by the AP. In this case, the load percentage of AP_1 is 4/10 = 40%, and that of AP_2 is 1/10 = 10%. The load balancing mechanism needs to be enabled to balance the load between AP_1 and AP_2. Then some STAs are steered from AP_1 to AP_2 based on the load balancing threshold and the load difference threshold.


Reference:

https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/load- balancing



In a multicast solution, there must be reachable unlcast routes between multicast sources and receivers.

  1. True
  2. False

Answer(s): A

Explanation:

In a multicast solution, there must be reachable unicast routes between multicast sources and receivers, because multicast routing protocols use unicast routing information to build multicast forwarding trees.


Reference:

https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/multicast



After multicast-to-unicast conversion is enabled on an AP's air interface, which of the followings is the destination MAC address of multicast packets sent over the air interface?

  1. Multicast MAC address
  2. MAC address of the multicast source
  3. Broadcast MAC address
  4. MAC address of a STA

Answer(s): D

Explanation:

After multicast-to-unicast conversion is enabled on an AP's air interface, the destination MAC address of multicast packets sent over the air interface is changed to the MAC address of a STA that has joined the multicast group. This improves the transmission efficiency and reliability of multicast packets.


Reference:

https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/multicast-

to-unicast-conversion



To enable WPA3-incapable ST As to access a WPA3-conflgured network, the WI-FI Alliance defines the WPA3 transition mode in which WPA3 and WPA2 can coexist for a period of time in the future. This mode applies only to WPA3-Enterprise, not to WPA3-Personal.

  1. True
  2. False

Answer(s): B

Explanation:

The WPA3 transition mode applies to both WPA3-Enterprise and WPA3-Personal. In this mode, WPA3 and WPA2 can coexist for a period of time in the future to enable WPA3-incapable STAs to access a WPA3-configured network.


Reference:

https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/wpa3- transition-mode



Which of the following statements correctly arranges matching modes used by URL filtering in descending order of priority?

  1. Exact matching > Prefix matching > Suffix matching > Keyword matching
  2. Exact matching > Suffix matching > Keyword matching > Suffix matching
  3. Exact matching > Suffix matching > Prefix matching > Keyword matching
  4. Exact matching > Keyword matching > Suffix matching > Prefix matching

Answer(s): C

Explanation:

URL filtering supports four matching modes: exact matching, suffix matching, prefix matching, and keyword matching. The priority order of these modes is as follows:
Exact matching: The highest priority. An exact match means that a URL entered by a user is exactly the same as a URL in a blacklist or whitelist.
Suffix matching: The second highest priority. A suffix match means that a URL entered by a user ends with a suffix in a blacklist or whitelist.
Prefix matching: The third highest priority. A prefix match means that a URL entered by a user starts with a prefix in a blacklist or whitelist.
Keyword matching: The lowest priority. A keyword match means that a URL entered by a user contains a keyword in a blacklist or whitelist.


Reference:

https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/url-filtering



Viewing page 5 of 13
Viewing questions 21 - 25 out of 261 questions


Post your Comments and Discuss Huawei H12-351 exam prep with other Community members:

AI Tutor AI Tutor 👋 I’m here to help!