Huawei H12-721 Exam Actual Questions
HCNP-Security-CISN (Huawei Certified Network Professional - Constructing Infrastructure of Security Network) (Page 9 )

• L2TP uses UDP port 1701 for the L2TP control channel.
• The destination port is 1701; the source port is a dynamically chosen ephemeral port on the client (not 1701).
• Therefore the statement that both source and destination ports are 1710 is incorrect (and 1710 is not the standard L2TP port).

• The destination port should be 1701, not 1710.
• The source port should be an ephemeral port chosen by the client, not 1701.

• Basic: Self-help only; no technical support or design assessment.
• Standard: Technical support, but not the full proactive architectural guidance required here.
• Professional Direct: Provides proactive guidance and architecture-related assistance.
• Premier: Also supports this, but is a more expensive, enterprise-level option.

• CAPWAP (Control And Provisioning of Wireless Access Points) creates a tunnel between the AP and the Wireless LAN Controller over the IP network. The AP and WLC communicate via this CAPWAP tunnel, which can traverse Layer 2 or Layer 3 networks.
• The AP does not have to be on the same switch as the WLC. It can connect to any switch in the network, as long as there is IP reachability between the AP and the WLC. This is why option D is correct.
• The other options are incorrect:

• A) You can only apply a single template BOM to a service object.

• C) You can modify or delete lines in a BOM template regardless of whether the template has been associated to a service object, or not.

• B) You can apply many template BOMs to a service object — false; typically only one template per service object.
• D) You can modify/delete lines only if not associated — false; you can modify templates even after association (per C).

• B: Intégrez des résultats de due diligence tels que les évaluations de risque client.

• C: Utilisez des correspondants en aval pour enquêter et signaler les activités suspectes.

• RPO (Recovery Point Objective) — maximum acceptable data loss, measured in time. It specifies how far back in time you can tolerate data loss. Example: RPO of 2 hours means backups must occur at least every 2 hours.

• ARO (Annualized Rate of Occurrence) — expected frequency of a threat occurring per year. It estimates how often a risk is likely to happen on average (used in risk calculations).

• MTTR (Mean Time To Recover) — average time to recover/restore service after an incident. It includes detection, repair, and restoration time, and helps gauge downtime and alignment with RTO.

• Assign users or their team an appropriate security role.
• Ensure the role has the required table privileges, such as read, create, write, and append.
• Share the app with that security role in the app designer.

• Dynamics administration center: Used for environment and service administration, not routine app access configuration.
• Manage Roles: Not the specific Dataverse area used to define app and data permissions.
• Security Roles: Define what users can access and which operations they can perform.

• A private IP address on the virtual network
• A public IP address associated with its IP configuration

• B — Increase provisioned concurrency for Lambda

• D — Refactor the Lambda functions

• E — Use Amazon RDS Proxy

• The correct permission is Manage Sandboxes (the official Salesforce name; the option in the list is written as “Manage Sandbox,” which is effectively the same idea but the canonical name uses the plural).
• Why: Sandboxes are a lifecycle feature. Only users with the explicit Manage Sandboxes permission can perform create, delete, refresh, or activate actions.
• Why the other options aren’t correct:

• The Well-Architected Framework has five pillars: Operational Excellence, Security, Reliability, Performance Efficiency, and Cost Optimization.
• Operational Excellence: how you run and improve your systems—monitoring, incident response, and evolving processes.
• Reliability: the ability of a workload to recover from failures, maintain uptime, and scale as demand changes.

• Availability (A) is not a pillar name; it’s an outcome that relates to Reliability.
• Scalability (C) isn’t a pillar name; scalability touches on Performance Efficiency.
• Responsive design (D) is not a pillar in the Well-Architected Framework.

• Correct answer: D) Amazon Aurora Serverless

• Aurora Serverless is serverless, so compute capacity scales automatically and can pause during idle periods. This minimizes ongoing administration and you pay only for actual usage, which is ideal for infrequent workloads.
• PostgreSQL on EC2 requires full OS and DB administration.
• RDS for PostgreSQL is managed but still involves provisioning capacity and some maintenance tasks.
• Aurora PostgreSQL (non-Serverless) is managed but requires you to manage capacity, though with some automation; it’s not as hands-off as Serverless for intermittent usage.

• This is a lookup relationship. Salesforce does not cascade access from a child (Opportunity) to its parent (Account) via implicit sharing.
• To view the Account, the user must have explicit access to the Account (via its OWD/sharing, or object permissions).

• The user has Read/View (or higher) on Account via profile/permission set.
• Manual sharing or a sharing rule grants that Account to the user.
• The Account is exposed by a broader permission like View All/Modify All on Account.
• Role hierarchy with Grant Access Using Hierarchies could grant access to Accounts owned by others, if applicable.

• To get min/max per column, you need column profiling. That’s provided by enabling the column profile.
• To actually see those min/max values, you should show the column profile in the details pane, and you also need the details pane itself enabled so you can view it.

• Enable column profile (B)
• Show column profile in details pane (C)
• Enable details pane (E)

• Show column value distribution (D) shows distribution shape but isn’t required to get min/max.
• Show column quality details (D) deals with data quality metrics, not min/max.

• Key difference: DirectQuery leaves data in the on-prem SQL Server and queries it live. That means every visual request can trigger online processing on the source, which can be slower and adds load on the on-prem system. In contrast, Import loads data into the Power BI data model, so visuals render from the in-memory engine (faster).

• Why that helps with the requirements:

• Why not A or B: Both rely on live data via DirectQuery, which contradicts the goal to minimize online processing and visuals performance.

• Why not D: It uses Import, but refreshing hourly adds unnecessary processing and complexity when daily refresh already satisfies currency needs.

• In Spark, an executor is a JVM that can have multiple cores. Each task can consume some CPUs (spark.task.cpus).
• The executor’s resources are effectively partitioned into slots, where each slot can run one task. The number of slots per executor is roughly spark.executor.cores / spark.task.cpus.
• Therefore, multiple tasks can run in parallel within the same executor (via these slots). So the statement “Tasks run in parallel via slots” is correct.

• A: A slot is not another name for an executor; a slot is a unit inside an executor.
• B: There’s no requirement that there must be fewer executors than tasks; tasks can be scheduled over time across the available slots.
• C: An executor can run more than one core; it’s not limited to a single core.
• D: There isn’t a rule that there must be more slots than tasks; tasks can wait if slots aren’t available, and you can have equal or even fewer slots than concurrent tasks.

• The correct AAA mapping (per Cisco objectives) is:

• Why the given options aren’t fully correct:

• Quick takeaway: when you configure AAA, you should conceptually map them as:

• Example commands (to reinforce concepts):

• Answer:

• Why:

• Why the other centers aren’t the right fit here:

1. Download the updated VPN client configuration package from the Azure VPN gateway.
2. Remove or update the existing VPN client configuration on the Windows 10 workstation.
3. Install the new package and reconnect.

• I can’t view the images, so I can’t tell which table is labeled as A in your screenshot. But here’s how to decide:

• How to identify the fact table:

• How to identify the surrogate key in the Patient table:

• Relationship:

• The app on EC2 connects to Aurora using DB credentials stored on the instance. Secrets Manager centralizes these credentials and can rotate them automatically, eliminating manual updates on each EC2 host.
• Automatic rotation reduces operational overhead and enhances security because credentials are rotated on a schedule without code changes.
• The app can retrieve the current secret at runtime (e.g., via the AWS SDK) and use it to authenticate to Aurora, avoiding reliance on locally stored files.

• B (Parameter Store) can store secrets but lacks seamless built-in rotation for database credentials like Secrets Manager; rotation often requires more custom work.
• C (S3) would require complex tooling to rotate and securely fetch credentials and still risks exposure if access policies aren’t perfect.
• D (Encrypted EBS volumes) would store credentials locally on each instance and does not automate rotation or centralized management.

• What wipe does: A factory reset that erases all data, apps, and settings and returns the device to the OOBE. It removes the device from management and resets identity.
• Why not for this scenario: The goal is to repurpose the same device to a new user with Autopilot. Autopilot Reset keeps the device’s Azure AD/Intune identity and re-provisions the device for the next user without a full wipe.
• What Autopilot Reset does: Removes user data and apps but preserves device identity and management connection, then reapplies the Autopilot provisioning for the next user.
• When you’d use wipe instead: If you’re selling or permanently discarding the device, or you truly want to scrub all traces and start fresh without re-enrolling.

• Answer: Data enhancement.

• Why: Augmenting gold-layer tables with an additional dataset is enriching or enhancing the existing data to support the ad-hoc analysis. The other options don’t capture the idea of adding external data to improve the dataset (ad-hoc improvements = tweaks, last-mile dashboarding = building dashboards, last-mile ETL = ETL steps at the end of the pipeline). In practice, this is often also called data enrichment.

• The correct answer is “Think and work holistically” (Option B).

• Focus on value: ensures outcomes matter to stakeholders, but isn’t specifically about end-to-end delivery.
• Optimize and automate: about efficiency and performance, not the holistic view.
• Collaborate and promote visibility: about teamwork and sharing information, not the end-to-end scope.

• Windows 10 VMs
• Windows Server 2012 or later VMs
• Running VMs—they do not need to be shut down
• Debian 8.2+ VMs, assuming the specific version is supported
• Stopped or deallocated VMs

• Review the risk register.
• Use the previously defined risk response plan, such as assigning a backup resource, reprioritizing work, or using another qualified engineer.
• Implement the response promptly because the task is on the critical path.

• B: Revising the schedule without first applying the planned response may be premature.
• C: Excluding a required task could compromise the project’s objectives and requirements.
• D: Updating the risk and lessons learned records is appropriate, but it should happen after managing the immediate issue, not as the next primary action.

• ProductSearchModel.getProductSearchHits() — option C
• ProductSearchHit.getRepresentedProducts() — option B

• ProductMgr.queryAllSiteProducts() (A) queries every product in the site, which is heavy and not scalable for large catalogs.
• Category.getProducts() (D) retrieves all products in a category; this can be slow for large categories.
• Using the search model and hits (B and C) leverages the search index, supports paging, and avoids scanning the entire catalog, making it more scalable.

• Voice devices ? VLAN 10
• Data devices ? VLAN 20
• SVI for VLAN 10 ? 192.168.10.1
• SVI for VLAN 20 ? 192.168.20.1

• A: Describes a physical trunk interface, not an SVI.
• B: An SVI can provide management access, but that is not its primary definition here.
• D: SVI does not compensate for insufficient physical ports; it is a logical interface.

• Why: If an application on EC2 needs to call other AWS services, using an IAM role (attached to the EC2 instance as an instance profile) provides temporary, automatically rotated credentials. This avoids embedding access keys in the application.
• How it works: Create a role with the minimum required permissions, attach it to the EC2 instance, and let the AWS SDK used by the application retrieve credentials from the instance metadata service. The credentials rotate automatically and are scoped to the policy you define.
• Why not other options:

• Correct answer: D) Microservices using API

• Why:

• Correct answer: C — The model is deployed at UK border checkpoints.

• The EU AI Act applies to AI systems used within the EU or by entities established in the EU. So:

• Dynamics 365 Remote Assist — used for remote collaboration and mixed-reality scenarios.
• Dynamics 365 Finance — supports financial and operational management.
• Dynamics 365 Business Central — designed primarily for small and medium-sized businesses’ finance and operations.
• Dynamics 365 for Phones — provides mobile access to Dynamics 365 apps, including Sales, through the mobile Unified Interface.

• Answer: D) Out-of-band management

• Why this is correct:

• Why the other options aren’t suitable here:

• S3 Lifecycle rules automate actions such as transitioning objects to different storage classes or deleting old objects.
• S3 bucket policies control access permissions; they do not preserve earlier object versions.
• S3 server-side encryption protects data confidentiality by encrypting objects at rest, but it does not prevent deletion or overwriting.

• Accidental deletion or overwriting ? S3 Versioning
• Unauthorized access ? bucket policies and IAM
• Data encryption ? server-side encryption

• The explanation states that Traffic Analytics can be enabled by a user with one of these subscription-level roles:

• Question 34 — Network Contributor: Yes
• Question 35 — Owner: Yes
• Question 36 — Reader: Yes, according to the stated explanation and documentation

• A separate scope using a /32 subnet: A /32 identifies one host, but it is not a practical DHCP scope for this purpose.
• A static IP within the DHCP range: This can cause an IP address conflict if DHCP assigns that address to another device.
• SLAAC: Used for automatic IPv6 address configuration, not for assigning a predictable IPv4 address through DHCP.

• Correct answer: D — AWS Migration Hub

• AWS Migration Hub provides a single location to track the progress of application migrations. It offers a centralized dashboard to view migration status across multiple tools and projects.

• AWS Application Discovery Service helps inventory and map on-prem applications and their dependencies, not a single progress tracker.
• AWS Application Migration Service (formerly SMS) performs the actual lift-and-shift migrations, but isn’t the centralized tracker itself.
• AWS Service Catalog manages catalogs of IT services for self-service deployment, not migration progress.

• Correct answer: B — From the code repository, modify Startup.cs (in ASP.NET Core you configure the Application Insights SDK in code, not with ApplicationInsights.config).

• Why the other options aren’t correct:

• How to implement fixed-rate sampling (ASP.NET Core):

var builder = WebApplication.CreateBuilder(args); 


    builder.Services.Configure<TelemetryConfiguration>(telemetryConfiguration => 
    { 
        var builder = telemetryConfiguration.DefaultTelemetrySink.TelemetryProcessorChainBuilder; 
        double fixedSamplingPercentage = 10; // 10% sampling 
        builder.UseSampling(fixedSamplingPercentage); 
    }); 


    builder.Services.AddApplicationInsightsTelemetry(new ApplicationInsightsServiceOptions 
    { 
        EnableAdaptiveSampling = false 
    }); 


    var app = builder.Build();

• Geo-redundant storage (GRS) replicates data to a secondary Azure region, but the secondary copy is normally unavailable for read access.
• RA-GRS provides geo-replication and read-only access to the secondary region, satisfying all requirements.
• Zone-redundant storage (ZRS) replicates data across availability zones within the same Azure region, not separate geographic regions.
• Locally redundant storage (LRS) keeps copies within a single datacenter or region and does not provide geographic resiliency.

• Pull: Downloads changes from the central repository and updates the local repository.
• Push: Sends local commits to the central repository.
• Commit: Records local changes in the repository’s history.
• Merge: Combines changes from different branches.
• Clone: Creates a new local copy of a repository.

Simple explanation

• The Azure VPN gateway to connect to
• Authentication settings
• Routes for networks that the client can access

• Strongest encryption algorithms: Choose the strongest available encryption and integrity options, typically AES with the largest key size and a secure integrity algorithm.
• Encrypt all traffic: Select tunnel mode rather than transport mode. Tunnel mode encrypts the entire original IP packet, which is appropriate for a site-to-site VPN between branch networks.
• Secret-password authentication: Configure a pre-shared key (PSK) on both VPN concentrators. The key must match at both ends.

• A. Number ? Decimal — Correct. Salesforce Number fields are represented in Apex as Decimal.
• D. Date/Time ? Datetime — This is correct conceptually, but “Dateline” is not an Apex type. If the option literally says “Dateline,” it is incorrect.
• E. Checkbox ? Boolean — Correct. A checkbox contains true or false.

• Number ? Integer — A Number field maps to Decimal, even when its scale is zero.
• Text Area ? List<String> — A text area maps to a single String, not a list.

• A (training data, hyperparameters, stakeholder feedback) focuses on training provenance; these details are important but are typically part of pre-deployment/training records, not the primary post-deployment documentation.
• B (encountered issues, monitoring process, risks) relates to governance and monitoring rather than the core documentation you’d publish about the deployed model itself.
• C (licensing information, the team, business goals) covers governance context but not the technical traceability and performance-based record needed for ongoing maintenance.

• Multi-pass wipe: Overwrites the drive’s existing data multiple times, making recovery much more difficult while preserving the drive’s functionality.
• Single-pass wipe: May be sufficient in some modern sanitization standards, but is presented here as less secure than multiple overwrites.
• Degaussing: Uses a strong magnetic field to disrupt data. It can render the drive unusable or unreliable, reducing its resale value.
• Pinning: Is not an appropriate data-sanitization method.

• Approval publish: Request approval from a manager of the knowledge base before moving the article into the publish state.
• Instant Publish: Immediately publishes a draft article without requiring an approval.
• Instant Retire: Immediately retires a published article without requiring an approval.
• Retire Knowledge: Moves a knowledge article to the retired state.

• These are the base knowledge workflows that control how articles move between states (Draft, Published, Retired) and whether approvals are required.
• The other options describe different lifecycle actions, but these four cover the standard publish/retire workflows in ServiceNow.

• The AWS Support Concierge is a specialized team within Enterprise Support whose primary role is handling billing and account questions and helping with account setup and getting started.
• They are not the source for architecture guidance or development assistance; those services are provided by Technical Account Managers (TAMs) or Solutions Architects as part of Enterprise Support.
• For technical support cases, customers typically interact with AWS Support engineers or the TAMs, not the Concierge. The Concierge may route or coordinate related requests, but they don’t provide the technical resolution.

• What Concierge does: billing and account inquiries, onboarding help, coordination with AWS support.
• What Concierge does not do: provide architecture/design guidance or in-depth technical support case resolutions.

• The standard Enterprise Architecture domains are: Business, Data, Application, Technology (BDAT).

• A: Business, strategy, application and technology — includes business and application/tech but uses “strategy” instead of data.
• B: Zachman, TOGAF, Cobit, and Heath architectures — names frameworks, not domains.
• C: Business, data, infrastructure and technology — has business, data, and technology; lacks a distinct application domain (uses “infrastructure” instead).
• D: Process, database, software and technology — covers data (database), application (software), and technology, but omits business.

• The four BDAT domains (business, data, application, technology) is the conventional model you should study.
• None of the options perfectly lists all four BDAT domains. The closest are C (if you map infrastructure to technology) and D (data/application/technology but no business).

• Answer: No.

• Why:

• If you need such an assessment while controlling costs, you’d generally pursue a paid MCS engagement or another option outside of the basic Premier entitlement.