Huawei H12-731_V2.0 Exam Prep
HCIE-Security (Written) V2.0 (Page 18 )

• How quickly the vendor must respond to incidents or requests
• Availability or uptime requirements
• Resolution time targets
• Performance expectations and penalties for failing to meet them

• SOW (Statement of Work): Describes the work, deliverables, scope, and schedule.
• MOA (Memorandum of Agreement): Documents an agreement in which parties commit to specific responsibilities.
• MOU (Memorandum of Understanding): Records a general intention to cooperate; it may not be legally binding.

• Suspended an operator who refused to use unsafe equipment.
• Paid another operator a bonus for using it.
• Prioritised short-term productivity over employee safety.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — The factory’s safety record is likely to be poor.

1. Yes — One account can manage multiple subscriptions

1. No — You cannot merge two subscriptions into one

1. Yes — A resource belongs to only one subscription

• UPS battery-backed outlets: Connect only essential devices needed during an outage:

• Surge-protector-only outlets: Connect nonessential devices, especially the printer. Printing does not need to continue while you are saving work and shutting down.
• UPS power source: Plug the UPS directly into a wall outlet.
• Surge protector power source: Plug it directly into a wall outlet as well. Do not normally plug a surge protector into the UPS, because that creates a daisy chain and can overload the UPS.

• Determine risk tolerance: Tolerance defines how much variation or exposure the organization is willing to accept. Scenarios may help apply tolerance, but they do not primarily determine it.
• Determine risk appetite: Risk appetite is established at an enterprise or governance level. Scenarios help compare risks with the appetite; they do not normally establish it.
• Develop risk responses: Once risks are identified and assessed, scenarios support response planning. However, response development comes later.

• 25 – Traditional SMTP server-to-server mail transfer; often blocked for client submission and not inherently secure.
• 110 – POP3 for receiving email; unencrypted by default.
• 143 – IMAP for accessing email; unencrypted by default.
• 587 – Authenticated email submission and commonly secured with TLS.

• Due diligence: Investigating and evaluating a third party before entering into or continuing a business relationship.
• Attestation: An independent party provides assurance about an organization’s claims or controls. A SOC 2 examination is an example of an attestation engagement, but the analyst requesting and reviewing the report is performing due diligence.
• Internal audit: Reviews the organization’s own internal controls.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.

• Limiting the number of MAC addresses learned on a switch port
• Allowing only specific, approved MAC addresses
• Taking action when the limit is exceeded, such as dropping frames or disabling the port

• Identifies which user or department owns the device
• Supports inventory and compliance requirements
• Enables tracking of lost, stolen, retired, or unauthorized devices
• Helps enforce security controls such as mobile-device management and secure configuration

• Layer 1: Check cables, power, and link lights.
• Layer 2: Check switching, VLANs, and MAC learning.
• Layer 3: Check IP addressing, routing, and gateways.
• Higher layers: Check services, applications, and user settings.

• Create a plan of action: Decide how to implement the fix.
• Implement the solution: Apply the selected fix.
• Verify functionality: Confirm the problem is resolved and systems work normally.

• A — VARIANT "null" values are not the same as SQL NULL values: True

• B — Frequent, single-row DMLs: False

• C — Validate data before loading into the target table: True

• D — Use staging tables to manage MERGE statements: True

• Security groups
• Dynamic security groups
• Cloud-only or synchronized security groups

• Microsoft 365 groups
• Distribution groups
• Mail-enabled distribution groups

• Asynchronous inference is designed for applications that submit individual inference requests, place them in a queue, and retrieve results later. It is useful when requests may take a long time or when traffic is intermittent.
• Batch transform is designed specifically to run inference over an entire large dataset stored in Amazon S3 and produce an output dataset.

• Large dataset/offline processing ? Batch transform
• Large or slow individual requests processed later ? Asynchronous inference

• Frequency/likelihood = how often or how likely the risk is to occur.
• Severity/impact = how damaging or costly the consequences would be.

• A minor equipment fault occurring frequently may have high frequency but low severity.
• A major cyberattack occurring rarely may have low frequency but high severity.
• A risk that happens often and causes substantial losses has high frequency and high severity.

• Required response time
• Resolution time
• Availability or uptime
• Support hours
• Performance targets
• Consequences if targets are missed

• SOW (Statement of Work): Defines the project’s scope, tasks, deliverables, and schedule.
• MOA (Memorandum of Agreement): Describes the responsibilities and commitments between parties.
• MOU (Memorandum of Understanding): Documents a general mutual understanding or intent, often before a formal agreement.

• Install unauthorized or unsupported software
• Access features blocked by the manufacturer or operating system
• Customize system behavior beyond normal settings

• Amazon EC2 instances — ???????? ?? ?? ??????? CPU, memory ??? instance size ???????? ???????
• AWS Lambda functions — memory configuration ?????????? ???????
• Amazon EBS volumes — volume type ?? size optimize ???? ???????
• ??????? ECS workloads — resource configuration ? cost optimization-?? ???????

• Memory ? compute usage ?????????? ???? custom code ????? ???? development ? maintenance ??????
• Cost allocation tags ???? ????? ??? ?????? ???? ??????? ???; inefficient resource ??????? ?? recommendation ???? ???
• CloudTrail resource ???? ?? API activity ??????, resource utilization ????

• On VirtualNetworkA: enable Allow gateway transit.
• On VirtualNetworkB: enable Use remote gateways.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity; it is not the best control for scanning uploaded documents for malware.
• C. Load balancer: Distributes traffic among servers and improves availability, but does not inspect files for malware.
• D. WAF: Protects web applications against attacks such as SQL injection and command injection. It may help secure the upload function, but malware scanning is the key requirement here.

• state preserves the client’s original context, such as the specific idea URL the user requested.
• The portal sends that value in the OAuth authorization request.
• Salesforce returns it after authorization, allowing the portal to redirect the user to the original idea rather than the Ideas home page.

• QuickVisualize is used to create and render a Power BI report from a DataFrame.
• The typical pattern is:

python 
PBI_visualize = QuickVisualize( 
    get_dataset_config(df), 
    auth=device_auth 
) 


PBI_visualize

• get_dataset_config(df) prepares the dataset configuration.
• auth=device_auth supplies authentication for the Power BI connection.
• Evaluating PBI_visualize renders the report in the notebook.

• Box 1: No
• Box 2: Yes
• Box 3: Yes

• A: Concerns task scheduling and avoiding missed runs, not directly sizing the warehouse.
• B: The amount of data in a stream alone does not reliably determine compute needs; the SQL processing is what matters.
• D: A multi-cluster warehouse addresses concurrency, not the compute size needed for one task execution.

• Sales process: Controls which Opportunity Stage values are available.
• Record type: Associates the appropriate sales process with a business scenario and controls available picklist values.
• Page layout: Controls which fields are displayed and whether they are required or read-only.

• Energy Market Team 1 ? Record Type 1, Sales Process 1, Page Layout 1
• Energy Market Team 2 ? Record Type 2, Sales Process 2, Page Layout 2
• Services/Installation Team ? Record Type 3, Sales Process 3, Page Layout 3

• MTTC: Time required to contain or limit the incident’s impact — best match.
• MTTR: Time required to remediate or recover from the incident; this may include eradication, restoration, and cleanup, which goes beyond merely stopping spread.
• MTTD: How long it takes to discover the incident.
• MTBF: Average time between failures, generally a reliability metric.

• Which host first communicated with the suspected malicious source
• Whether that host initiated suspicious traffic or merely received it
• Which other hosts show evidence of infection, such as connections from the originating host
• Which hosts have no related suspicious activity and are therefore clean

• An outbound connection to a suspicious external address
• A downloaded or executed malicious file
• Later lateral connections from that host to other internal systems
• Firewall logs showing the direction and timing of the traffic

• Disable high concurrency: Changes workspace-wide behavior and is not the targeted way to isolate these workloads.
• Modify the number of executors: Adjusts capacity and performance, but does not provide workload isolation.
• Set the default environment: Controls libraries and runtime configuration, not compute isolation.

• Default route: 0.0.0.0/0; used only when no more specific route exists.
• Network route: A route covering the destination, such as 10.10.13.0/24.
• Host route: An exact 10.10.13.10/32 entry in the routing table.
• Floating static route: A backup static route with a higher administrative distance.

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but it is not the primary control for switch-port MAC learning.
• NGFW: Protects at network boundaries but does not directly limit MAC addresses learned on access ports.

1. Open Notepad as Administrator.
2. Open:

1. Remove or correct the line mapping the website to the wrong IP address.
2. Save the file.
3. Optionally run:

cmd 
   ipconfig /flushdns

• Deterministic approve/reject results
• Strict adherence to predefined rules
• Consistent, reproducible outcomes
• Auditability and regulatory compliance

• The audience and stakeholders
• The complexity and type of requirements
• The communication method and level of detail needed
• Whether to use diagrams, models, documents, demonstrations, or slides

• B: Authority to host the presentation is not the key preparation activity.
• C: Stakeholder sign-off may occur later; presenting requirements does not always require formal approval beforehand.
• D: A scribe may be useful in a meeting, but hiring one is not a core preparation requirement for presenting.

• The product is already in production.
• The organization is examining the product’s functions and cost drivers.
• The objective is to reduce cost without reducing perceived value or required quality.

• Kaizen costing focuses on continuous, usually incremental, cost reductions during the manufacturing stage. It is not specifically the systematic examination of a product’s functions.
• Standard costing compares actual costs with predetermined standards; it is a control technique, not a product redesign method.
• Process innovation concerns developing significantly improved production processes, rather than analysing the product’s functions and value.

• Incident and problem management
• Change management
• Service-level management
• Configuration management
• Continual improvement

• Kanban: A workflow and task-visualization method; useful within service teams but not a complete service-management framework.
• Lean Six Sigma: Focuses on reducing waste and process variation; broader process-improvement methodology.
• ITSM: The overall discipline of managing IT services, not a specific framework or process model.

• Malware or malicious software
• Command-and-control tools
• Internet surveillance and intrusion software

• ITAR: A U.S. regulation controlling defense-related articles and services; it is not the international arrangement described.
• Palermo Convention: Focuses on transnational organized crime and related protocols, not export controls for cyber weapons.
• GDPR: European data-protection and privacy legislation.

1. Open File Explorer.
2. Go to View ? Show ? File name extensions

1. Disable Hide extensions for known file types.
2. Rename the complete filename from Document.txt to Document.xml.
3. Confirm the extension-change warning.

• One network address
• Two usable host addresses—one for each router
• One broadcast address

• Router A: 10.2.1.1
• Router B: 10.2.1.2

• On-premises resources, such as an existing database
• Cloud resources, such as Azure services or virtual machines
• Connectivity that allows the application to use both environments

• Public cloud: resources are entirely provided through a public cloud provider.
• Private cloud: resources are dedicated to one organization, typically on-premises or privately hosted.

• Instant messaging/chat: Can be abused to send malicious links or attachments, but P2P file sharing is the more direct high-risk source.
• E-mail: A common malware delivery method, but this question specifically emphasizes an application type associated with direct file exchange.
• End-to-end applications: This describes communication protection or architecture, not a specific application category known for malware distribution.

• Driver node: Coordinates Spark jobs and runs in the compute environment.
• Worker node: Executes tasks and processes data.
• Databricks Filesystem (DBFS): Provides storage access for data used by compute resources.

Correct sequence

1. Merge Sales_Region with Sales_Manager using an inner join

1. Merge Region_Manager with Manager using an inner join

1. Merge Sales_Region and Region_Manager using a right join as a new query

• Review administrative-role membership ? PIM access reviews
• Require justification for continued membership ? PIM can require justification when activating or maintaining privileged access
• Alerts about administrator assignment changes ? PIM alerts and notifications
• History of administrator activation ? PIM audit history
• See changes made to Azure resources ? PIM activation/audit information can be correlated with Azure Activity Logs

• Existing measures
• Relationships
• Calculated columns
• Tables and fields
• Existing transformations in the model

• SharePoint folder: Reconnects to the source files. You would likely need to recreate the model and measures.
• Power BI dataflows: Primarily provide reusable data preparation and storage, but they do not automatically provide the existing semantic model and measures.
• Excel workbook: Connects directly to the source file and would also require rebuilding the model and measures.

• Custom domains: Supported by Basic and higher tiers.
• Dedicated compute: Basic and Standard use dedicated virtual machine instances; Free and Shared use shared infrastructure.
• Load balancing between instances: Standard provides scaling across multiple instances with load balancing.
• Storage: Standard provides more storage than Basic.
• Cost: Standard is the least expensive option that satisfies all the stated requirements.

• Free/Shared: Use shared compute and have limited features; they don’t meet the dedicated-compute requirement.
• Basic: Provides dedicated compute and custom domains, but does not provide the required Standard-level multi-instance capabilities in the exam’s feature comparison.

• Label applied does not automatically exclude a file from Copilot.
• Encryption/usage rights determine whether Copilot can access the file’s content.
• If the user has no permission under Label2, File3 should be unavailable to Copilot for that user.
• File3’s label might be inherited by derived content only if File3 was actually processed and contributed by an authorized user; it should not be treated as contributing merely because it exists in the source set.

• The selling division receives a credit based on a favourable transfer price, often market price or full cost plus a profit margin.
• The receiving division is charged a lower amount, such as marginal cost or another agreed price.
• The difference is accounted for centrally by head office or a corporate adjustment.

• B — Incorporate contextual output encoding/escaping: Encode untrusted data based on its context—HTML, attribute, JavaScript, or URL—so the browser treats it as data rather than executable code.
• D — Run untrusted HTML input through an HTML sanitization engine: Sanitization removes or neutralizes dangerous elements and attributes, such as script-related content, while preserving safe HTML where needed.

• A: Enabling client-side scripts does not prevent XSS. Script restrictions may reduce risk in some environments, but “enable” is not a general XSS control.
• C: Cookie inspection is unrelated to preventing injected scripts.
• E: The SameSite cookie attribute primarily helps mitigate CSRF, not XSS. It should not generally be described as an XSS prevention measure.

• The table is large.
• Queries frequently filter or join on particular columns.
• The table’s natural data order does not support good micro-partition pruning.
• Clustering improves performance enough to justify its maintenance cost.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Sustainability
• Performance efficiency
• Reliability

• Constrained VMs: VMs whose workloads are experiencing resource pressure, such as insufficient CPU or memory. They may need additional resources or optimization.
• Overprovisioned VMs: VMs allocated more CPU, memory, or storage than their workloads require. Their resources may be reclaimed or reduced.

• Underprovisioned VMs: This is not the predefined view identified for this report question.
• Zombie VMs: These are typically inactive or unused VMs and are useful for cleanup, but they are not the two views specifically intended here to identify inefficient resource allocation.