Huawei H12-891 Exam Prep
HCIE-Datacom V1.0 (Page 36 )

• O dispositivo estar registado no Windows Autopilot;
• A atribuição de Profile1 ao grupo;
• O estado de associação ao Microsoft Entra ID e de inscrição no Intune/MDM.

• B. Deploy to a SageMaker endpoint: This is needed for SageMaker-hosted models, not for a model intended to be used directly in Amazon Bedrock.
• C. Register with SageMaker Model Registry: SageMaker Model Registry is unrelated to invoking custom models in Bedrock.
• D. Grant access in Bedrock: Access permissions may be necessary, but they do not replace the required provisioned capacity.

• A — Improved management of storage space: Correct.

• B — Improved supplier relationships: Correct.

• C — Improved pricing decisions: Correct.

• D — Non-product-specific costs must be apportioned: Incorrect.

• E — Profitability of each customer group: Incorrect.

• Deterrent control: The signs warning that people may be filmed can discourage unauthorized or malicious activity. They do not directly stop the action; they influence behavior.
• Detective control: CCTV records or monitors activity so security personnel can identify events or investigate them afterward.

• Preventive: Stops an incident from occurring, such as access control.
• Corrective: Restores systems after an incident.
• Directive: Instructs people to behave in a certain way, such as a security policy.
• Compensating: An alternative control used when the preferred control is not feasible.

• Guest access: Controls external users invited into your teams as guests. It is not the primary setting for restricting federated communication by domain.
• Messaging policy: Controls messaging features, such as chat or message editing, rather than which organizations users can communicate with.
• Org-wide Teams settings: Contains broad Teams-wide configuration, but domain-based external communication is configured under External access.

• STIX: A standardized format for exchanging cyber-threat intelligence.
• OVAL: A language and framework for describing and assessing system vulnerabilities and configuration issues.
• Threat intelligence feed: Provides current indicators or threat information, but is not specifically a reference for common application exploitation techniques.
• CVE: A catalog of publicly disclosed vulnerabilities, identified by unique CVE numbers.

• Floating IP must be enabled on the load-balancing rule.
• Session persistence should normally remain None.
• The health probe determines which replica should receive traffic.
• Client-IP persistence is unnecessary and can cause connections from the same client to remain associated with a backend replica longer than intended.

• Q9 — Client IP session persistence: No
• Q10 — Floating IP: Yes

• Set credit quotas for an account or individual virtual warehouses.
• Define monitoring intervals.
• Trigger actions when usage reaches thresholds, such as sending notifications or suspending a warehouse.
• Help control unexpected warehouse spending.

• Account Usage: Provides historical usage and billing data; it does not enforce credit limits.
• Warehouse Limit Parameter: Not the Snowflake object used for account-wide credit controls.
• Credit Consumption Tracker: Not a standard Snowflake object.

• CBWFQ (Class-Based Weighted Fair Queuing): Creates traffic classes and assigns each class a guaranteed bandwidth or queueing treatment.
• PQ (Priority Queuing): Uses multiple queues with strict priority. Higher-priority queues are serviced before lower-priority queues, making it useful for delay-sensitive traffic—but it can starve lower-priority traffic.

• FRTS: Traffic shaping for Frame Relay; it controls the transmission rate rather than selecting packets during congestion.
• CAR: Polices traffic by rate, typically dropping or remarking packets that exceed a limit.
• PBR: Policy-Based Routing; it selects forwarding paths and is not a QoS queueing mechanism.

• Identify the causes of delays.
• Improve its workflow and collaboration.
• Adjust tools or development practices.
• Discuss improvements during retrospectives and apply them in future sprints.

• A: An impediment log can help track issues, but merely maintaining one does not remove the impediments.
• B: Directing the team toward solutions reduces team ownership and self-organization.
• C: Adding impediments to the product backlog may be appropriate in some cases, but it does not automatically ensure they are addressed promptly.
• D: Best reflects agile leadership: empowerment, continuous improvement, and removal of impediments.

• Driver node: Coordinates Spark jobs and runs in the compute environment.
• Worker node: Executes tasks and processes data.
• Databricks Filesystem (DBFS): Provides storage access for data used by compute resources.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity; it is not the best tool for scanning uploaded files.
• C. Load balancer: Improves availability and distributes traffic but does not inspect files for malware.
• D. WAF: Protects web applications against attacks such as SQL injection and command injection. It may inspect HTTP requests, but malware scanning of uploaded PDFs is the key requirement here.

• The job keeps 31 days of regular restore points. A backup from the week of January 1 is older than 31 days by March 20, so it is no longer expected to remain on the performance tier.
• It is also a weekly GFS full backup, retained for 14 weeks. Therefore, it is still protected and has not been deleted.
• In a Scale-out Backup Repository, older backups can be moved from the performance tier to the capacity tier—typically object storage—according to the configured offload policy.
• The archive tier is not selected because the question’s configuration does not indicate that the backup has been archived there.

• Identity: User-assigned managed identity

• Authorization: Azure RBAC

• Ramen is a Linux worm associated with Red Hat Linux 6.2 and 7.0 systems.
• It spreads by scanning randomly generated IP addresses using tools such as synscan.
• It exploits vulnerable network services, including web-related services, and may leave malicious files or altered web content.
• The tar.gz file is also a clue because it is a common Linux archive/package format.

• Code Red: Primarily targeted Microsoft IIS servers running Windows.
• LoveLetter: Spread mainly through email attachments.
• Nimda: A Windows-based worm that spread through email, web servers, and network shares.

• Render thousands of animation frames
• Generate product images in multiple sizes
• Apply filters or transformations to a large image collection
• Produce visual effects for a video

• Enable screensaver locks: After inactivity, the workstation locks and requires the user to authenticate again. This prevents someone nearby from using an unattended logged-in computer.

• Apply a BIOS password: A BIOS/UEFI password helps prevent unauthorized users from changing boot settings, booting from external media, or bypassing normal startup controls. It adds protection before the operating system loads.

• Defragment the hard drive: Improves drive organization/performance, not access control.
• Enable SSH: Provides remote command-line access and could introduce another access path; it does not restrict local workstation users.
• Disable iCloud integration: Not a general workstation access-control measure.
• Enable the firewall: Protects against network connections, but does not stop an unauthorized person who is physically using the workstation.

• Proxy server: Acts as an intermediary for requests, but does not necessarily provide an encrypted connection to the corporate network.
• NGFW: A firewall with advanced inspection and filtering capabilities; it may support VPNs but is not the remote-access solution itself.
• Security zone: A logical network grouping based on trust or security requirements, not a method for remote access.

• Unsafe images: Requires image/content moderation before the image is processed.
• Hidden instructions embedded in images: These are indirect prompt injections contained in untrusted image content or extracted text, not necessarily in the user’s typed prompt.

• WPA3: Secures wireless traffic but does not normally verify whether someone has paid.
• PSK: A shared Wi-Fi password gives access to anyone who knows it; it cannot easily validate individual receipts.
• IEEE 802.1X: Provides user/device authentication, commonly through an authentication server, but is excessive and not designed specifically for a simple receipt-based guest-access workflow.

1. Install a Cassandra-compatible ODBC driver.
2. Configure a data source name (DSN), if required.
3. In Power BI Desktop, select Get Data > ODBC.
4. Choose the configured DSN and connect.

• Microsoft SQL Server database: Connects to SQL Server, not Cassandra.
• OLE DB: Requires a compatible OLE DB provider; this is not the standard choice for Cassandra in Power BI.
• OData: Requires Cassandra data to be exposed through an OData service, which is not the normal direct connection method.

• Company documents
• Databases
• Knowledge bases
• Current web or business data

• A: Describes diversity and inclusive design, not grounding.
• B: Describes explainability or model interpretability.
• D: Describes documenting a model’s capabilities and limitations.

• Deterrent control: The signs warning that people may be filmed can discourage unauthorized activity. They do not physically prevent the activity, but they may influence behavior.
• Detective control: CCTV detects or records activity so security personnel can identify incidents and investigate them later.

• Preventive: Stops an incident from occurring, such as a locked door.
• Corrective: Restores systems after an incident, such as backups.
• Directive: Instructs people what to do, such as security policies or warning instructions.
• Compensating: Provides an alternative control when the preferred control cannot be used.

• E — Exploit Code Maturity: How readily exploit code exists or is usable.
• U — Unproven: No exploit code is known, or available exploitability has not been established.

• S:C — Scope is changed.
• RC:R — Remediation level is official remediation.
• AV:N — Attack vector is network.
• AC:L — Attack complexity is low.

• Response and resolution times
• Availability or uptime
• Performance targets
• Support obligations
• Penalties for failing to meet commitments

• SOW (Statement of Work): Describes the work, deliverables, scope, and tasks.
• MOA (Memorandum of Agreement): Documents a formal agreement about roles or responsibilities.
• MOU (Memorandum of Understanding): Records a general mutual understanding, often without detailed service metrics.

• Accept: Acknowledge the risk without taking additional action.
• Transfer: Shift the risk’s impact to another party, such as through insurance or outsourcing.
• Mitigate: Reduce the likelihood or impact, such as by implementing controls.
• Avoid: Eliminate the activity or situation that creates the risk.

• up ? down ? up
• Often happens rapidly or intermittently

• Faulty or loose cable or connector
• Failing transceiver, NIC, or switch port
• Speed/duplex or auto-negotiation problems
• Power or hardware instability
• Layer 1 interference

• Nothing plugged in: the port is simply down
• Latency: does not directly trigger err-disable
• shutdown: administratively disables the port, but that is not the same as an automatically detected err-disabled condition

• 10.2.1.0 — network address
• 10.2.1.1 — usable host
• 10.2.1.2 — usable host
• 10.2.1.3 — broadcast address

• Identifies which user or department owns the device
• Supports inventory and compliance requirements
• Enables tracking of lost, stolen, retired, or unauthorized devices
• Helps enforce security controls such as mobile-device management and secure configuration

• Disable high concurrency: Changes workspace-wide behavior and is not the targeted way to isolate these workloads.
• Modify the number of executors: Adjusts capacity and performance, but does not provide workload isolation.
• Set the default environment: Controls libraries and runtime configuration, not compute isolation.

• Required response and resolution times
• Availability or uptime targets
• Performance standards
• Support obligations
• Remedies or penalties for failing to meet the terms

• SOW (Statement of Work): Defines the project’s scope, tasks, deliverables, and schedule.
• MOA (Memorandum of Agreement): Describes agreed responsibilities between parties, often for a specific activity.
• MOU (Memorandum of Understanding): Records a mutual understanding or intention, usually less formal than a contract.

• Run the backup with WITH CHECKSUM
• Store the backup on an SMB network share

sql 
BACKUP DATABASE DB1 
TO DISK = '\\FileServer\SqlBackups\DB1_full.bak' 
WITH CHECKSUM;

• DMS does not create the SQL Server backups for you.
• You must provide a valid full database backup.
• You must continue taking transaction log backups while the source database remains online.
• The full backup and subsequent log backups must be available in the SMB share that DMS can access.
• WITH CHECKSUM enables backup checksum validation, helping detect backup corruption.

• Deterrent control: The signs warn people they may be filmed. This can discourage unauthorized activity because individuals know surveillance is present.
• Detective control: CCTV monitors and records activity, helping identify or investigate incidents after—or while—they occur.

• Preventive: Stops an incident from occurring; CCTV generally does not physically prevent access.
• Corrective: Restores systems after an incident.
• Directive: Tells people what they must do, such as a security policy.
• Compensating: An alternative control used when the preferred control cannot be implemented.

• Amazon S3 as the origin for static content
• Application Load Balancer (ALB) as the origin for dynamic content
• Amazon Route 53 configured to point the company’s domain name to CloudFront

• /static/* ? S3 origin; cache content at edge locations
• Dynamic paths such as /api/* ? ALB origin; forward requests to the EC2 application

• Which host first communicated with the suspected malicious source
• Whether that host initiated suspicious traffic or merely received it
• Which other hosts show evidence of infection, such as connections from the originating host
• Which hosts have no related suspicious activity and are therefore clean

• An outbound connection to a suspicious external address
• A downloaded or executed malicious file
• Later lateral connections from that host to other internal systems
• Firewall logs showing the direction and timing of the traffic

• Packet capture: Collects and analyzes network traffic; it does not describe the scan type.
• Privilege escalation: Attempts to gain higher permissions after obtaining access.
• System enumeration: Identifies systems, services, or resources, but is not specifically defined by the lack of credentials.
• Passive scan: Observes traffic without actively probing systems. A vulnerability scan is generally an active assessment.

Manager role

DAX 
Country[Manager] = USERPRINCIPALNAME()

• Sales
• Human Resources

CFO role

• See sales for all countries
• See no Human Resources data

• Do not restrict the Country table or Sales table.
• Apply a filter to Human Resources that always returns false, such as:

DAX 
FALSE()

• Lower order numbers appear first.
• For example, a variable with order 100 appears before one with order 200.
• The Sequence field is not the control used for catalog variable display order.
• The Default Value sets a value, not placement.
• The Choice field defines selectable options, not the variable’s position.

• Malware or malicious software
• Command-and-control tools
• Internet surveillance and intrusion software

• ITAR: A U.S. regulation controlling defense-related articles and services; it is not the international arrangement described.
• Palermo Convention: Focuses on transnational organized crime and related protocols, not export controls for cyber weapons.
• GDPR: European data-protection and privacy legislation.

• Partners first log in to the corporate portal, which uses the shared SAML Identity Provider.
• When they select a Salesforce link, the IdP can send a SAML assertion directly to Salesforce.
• Salesforce validates the assertion and grants access to the Partner Community without requiring another login. This is IdP-initiated SSO because authentication begins outside Salesforce.

• SP-initiated SSO starts when Salesforce sends an authentication request to the IdP. That would be appropriate if users began by visiting Salesforce.
• The Web Server and User Agent OAuth flows are for OAuth authorization, not browser-based SAML federation between an IdP and Salesforce.

• Orders contains order-level information, such as the order date.
• Order Line Items contains the products, quantities, and line amounts associated with each order.
• Merging them on the order key, such as OrderID, places the order date alongside each line item. This allows you to calculate total order value and analyze it over time.
• Product attributes can remain in the Products table and be related to the resulting line-item table through ProductID.

• Merging line items with products addresses product attributes but does not first provide the order-level date and value needed for time analysis.
• DAX calculated columns or lists add unnecessary model complexity.
• Calculating order counts is not the first requirement and does not combine the required order and line-item data.

• Design Studio > Emails ? create an email-template folder
• Design Studio > Landing Pages ? create a landing-page-template folder
• Add the relevant assets to each folder
• Right-click the folder and choose Share Folder
• Select the destination workspaces

• File is shared externally ? Access level

• File is labeled “Internal only” ? Sensitivity label

• \Pipeline1
• \Folder1\Lakehouse1

• Pipeline1 remains at the workspace root in Workspace1, so it is deployed to the root of Workspace2.
• Lakehouse1 was moved into Folder1, so its full path is preserved as \Folder1\Lakehouse1.
• Fabric deployment pipelines preserve folder paths because an item’s full path is treated as part of its name.

• Honeypots: Decoy systems or services designed to attract attackers. Legitimate users should not access them, so activity there is a strong indicator of compromise.
• DNS sinkholes: Redirect malicious or suspicious DNS requests to a controlled destination. This can identify infected systems attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it is not an attacker-detection method.
• CI/CD: Automates software development, testing, and deployment.
• Threat modeling: Identifies potential threats and weaknesses before or during system design; it does not directly detect an active infiltrator.
• Data obfuscation: Makes information harder to understand, but does not identify attackers.

• Fine-tuning requires a properly formatted training dataset.
• For classification or instruction-style fine-tuning, examples are supplied in JSONL format.
• Each line represents one training example, typically containing the input prompt and the desired completion or label.
• The file must then be uploaded or made available to the Microsoft Foundry fine-tuning workflow.

• A: Prompt Flow is useful for prompt experimentation, but it is not required to start fine-tuning.
• B: You do not need to deploy the base model to an online endpoint before fine-tuning.
• C: Tracing supports observability and evaluation, but it does not prepare the fine-tuning job or dataset.

• Defender for Servers is the Defender for Cloud plan that protects Azure VMs and generates security alerts that can be reviewed in Defender for Cloud.
• Azure Diagnostics extension collects guest OS monitoring data, but it does not onboard VMs to Defender for Cloud or provide Defender security alerts.
• Data connectors are used for Sentinel integrations.
• Azure Storage Analytics and workflow automation do not provide VM protection.