Huawei H12-891 Exam Prep
HCIE-Datacom V1.0 (Page 60 )

• B: Intégrez des résultats de due diligence tels que les évaluations de risque client.

• C: Utilisez des correspondants en aval pour enquêter et signaler les activités suspectes.

• A) configure matching hold and delay timers

• B) configure matching key-strings

• C) configure matching priority values

• D) configure unique virtual IP addresses

• Wiping securely overwrites the drive so the original data cannot reasonably be recovered. It is generally less expensive than physically destroying the device.
• Recycling could expose the data if the drive is not securely erased first.
• Shredding physically destroys the drive and is effective, but usually more costly and prevents reuse.
• Deletion only removes file references; it is not a secure sanitization method.

1. Determine which host was infected first—the originating host.
2. Decide whether each other host is clean or infected based on communication and event logs.

• Compare timestamps and find the earliest suspicious event.
• Look for the host that initiated the malicious connection, file transfer, exploit, or command—not merely a host that later received traffic.
• Follow the timeline through the firewall:

• A host is likely infected if it both receives suspicious activity and then initiates related malicious traffic.
• A host may be clean if the firewall blocked the connection and there is no evidence of execution or follow-on communication.

• Assign users or their team an appropriate security role.
• Ensure the role has the required table privileges, such as read, create, write, and append.
• Share the app with that security role in the app designer.

• Dynamics administration center: Used for environment and service administration, not routine app access configuration.
• Manage Roles: Not the specific Dataverse area used to define app and data permissions.
• Security Roles: Define what users can access and which operations they can perform.

• As the project progresses, you gain information, refine requirements, and lock down baselines (scope, schedule, cost). This reduces overall risk and uncertainty because more is known and addressed.
• At the same time, changes become more costly over time. Later changes can affect already approved baselines, cause rework, impact the critical path, require more coordination, and incur penalties or delays, all of which raise the cost of making changes.

• A Storage Gateway File Gateway provides an on-premises NFS/SMB file share that's backed by objects in S3. This is exactly what you need to migrate an NFS workload: applications continue using NFS, while the actual data moves to and is stored in S3.
• It can cache frequently accessed data locally for performance, while uploads go to an S3 bucket.
• Why the other options aren’t suitable:

• The correct answer is Mass Transfer Tool.

• The Mass Transfer Records tool is Salesforce’s built-in way to reassign ownership of existing records in bulk. In this scenario, you need to transfer ownership of the departed rep’s accounts and opportunities to a new rep while keeping the team structure intact.

• Go to Setup > Data Management > Mass Transfer Records.
• Choose the object: Accounts (and then Opportunities, if needed).
• Set “Transfer From” (the leaving rep) and “Transfer To” (the new rep).
• Decide whether to transfer related records as well (e.g., opportunities tied to accounts) and proceed.
• Review and confirm.

• Data Loader / Data Import Wizard are for bulk import/export, not bulk reassigning ownership.
• Dataloader.io is a third-party tool; the built-in Mass Transfer tool is the standard Salesforce method for this task.

• The requirement is a fully managed file server that natively supports Microsoft workloads and file systems and uses the SMB protocol. FSx for Windows File Server is built specifically for Windows workloads, provides native SMB file shares, and supports Windows permissions/Active Directory integration.
• Why the others don’t fit:

• Correct answer: A) Hashing

• Why: Hashing produces a fixed-size digest of the software. If the final build is altered in any way, the hash will change, enabling you to detect tampering by comparing the stored digest with a freshly computed one.

• Why not the others:

• Answer: False. Agents and managers CAN create knowledge articles from Community questions.

• Why: In ServiceNow, a Community question can be converted into a Knowledge article using the Create Knowledge (or Convert to Knowledge) action. This allows what customers asked to become a reusable article for others.

• How it works (high level):

• Permissions: This ability depends on having the right roles/permissions (e.g., agents or knowledge managers). If you don’t see the option, check your role assignments or the knowledge-management configuration.

• Quick take: If a question in Community is valuable for others, a trained agent can turn it into a Knowledge article, making it available for self-service.

• Box 1: Azure Lighthouse — ??? ??????? ? ?????????? ????????? ? ?????????? Entra tenants. ??? ??????????? ??? ??? ????? ????? ? VM ? ?????? ?????????/????????.
• Box 2: Azure Monitor Agent ? ?????????????? Data Collection Rules (DCR) — AMA ???????? ??????? Windows (????????, Security Logs) ? DCR ??????????, ????? ??????? ???????? ? ???? ?????????? (? ?????? Log Analytics workspace).

• The correct option is A: Data architecture.

• Why: In the AWS CAF, the Platform perspective covers the technical foundation and architecture that enable cloud workloads to run reliably and efficiently. This includes how data is modeled, stored, and accessed across the enterprise—the core of data architecture.

• Quick mapping for the other options:

• Correct answer: C — The model is deployed at UK border checkpoints.

• The EU AI Act applies to AI systems used within the EU or by entities established in the EU. So:

• The mapping and resolution of endpoint identities (EIDs) to their location (RLOCs) in an SD-Access fabric is handled by the control plane using the LISP protocol.
• Why not the others:

• Multiple nodes: Data is replicated several times in the primary region.
• Separate geography: A copy is asynchronously replicated to a secondary Azure region.
• Readable secondary: RA-GRS provides read-only access to the secondary replica, even when the primary region is available.

• GRS: Replicates to another region but the secondary copy isn’t normally readable.
• ZRS: Replicates across availability zones in the same region, not a separate geographic region.
• LRS: Keeps replicas within a single datacenter or region and provides no geographic redundancy.

• Amazon Cognito is designed for customer-facing apps to handle user sign-up, sign-in, and access control, and it can federate identities from social providers (Facebook, Google, etc.) or enterprise IdPs via SAML/OpenID Connect.
• You can configure a Cognito User Pool and connect social identity providers, then use tokens (JWT) to authorize backend API calls.

• AWS Directory Service is for connecting your AWS apps to an existing directory (like Active Directory) for enterprise users, not social login for customer apps.
• AWS IAM is for managing access to AWS resources, not end-user authentication for your website.
• AWS IAM Identity Center (AWS SSO) provides SSO for AWS accounts and enterprise apps, not typical social logins for consumer-facing websites.

• Why: After listing all resources, you need to assign who is responsible for each task. A RACI chart (Responsible, Accountable, Consulted, Informed) documents these roles for every activity.

• What RACI means:

• Why the others aren’t suitable here:

• Quick example: Task "Create user authentication module" — Responsible: Developer, Accountable: Tech Lead, Consulted: Security Architect, Informed: PM.

• Ablauf: Er wird in der gleichen Transaktion ausgeführt, bei der z. B. ein Datensatz erstellt oder aktualisiert wird. Der Benutzer wartet, bis der Workflow abgeschlossen ist.
• Stufen: Kann vor dem Vorgang (pre-operation) oder nach dem Vorgang (post-operation) laufen.
• Zweck: Sofortige Validierung oder Anpassung von Daten, ggf. auch das Verhindern eines Vorgangs, wenn Bedingungen nicht erfüllt sind.

• Automatisierte Flows (Power Automate, automatisierte/ Background Flows) laufen asynchron im Hintergrund, nachdem der Trigger erkannt wurde, und blockieren den Benutzer nicht.

• Active vs passive: Active assessment involves actively scanning targets by sending probes/packets to identify hosts, services, and vulnerabilities. Passive assessment observes traffic without probing.
• External vs internal: External assessment is about testing from outside the network perimeter; the scenario doesn’t specify external vantage, only that tools are identifying hosts/services across the enterprise network.

• The correct answer is “Think and work holistically” (Option B).

• Focus on value: ensures outcomes matter to stakeholders, but isn’t specifically about end-to-end delivery.
• Optimize and automate: about efficiency and performance, not the holistic view.
• Collaborate and promote visibility: about teamwork and sharing information, not the end-to-end scope.

• Correct answer: C: Amazon Comprehend.

• Why: The library wants to classify books based on their text content. This is an NLP (natural language processing) task. Amazon Comprehend is AWS’s managed NLP service that can perform content classification (including creating custom classifiers) and extract meaningful information from text. The other services are not focused on text classification:

• Quick note: In practice, you’d store the books in S3, extract text if needed (e.g., from PDFs with Textract), and then use Comprehend to classify the documents into topics or genres.

• cloud applications only
• all Web traffic including cloud applications

• Cloud applications only: Only traffic to cloud apps is steered to Netskope for inspection/enforcement; other traffic bypasses.
• All Web traffic including cloud applications: All web-bound traffic, including cloud app traffic, is steered to Netskope.

• Browser isolation, Web traffic only, or a vague “traffic only” option are not the standard two steering modes.
• These two configurations let you decide what traffic Netskope analyzes in real time and what is bypassed.

• The “Answer(s)” field lists B and C (likely incorrect). The explanatory text correctly describes cloud applications only and all Web traffic including cloud applications as the two configurations.

• Actual filename: Document.xml.txt
• Explorer displays: Document.xml
• File type: Text Document (.txt)

text 
Document.txt ? Document.xml

• Equipment and hardware
• Facilities
• Inventory
• Backup media
• Supplies stored at an alternate or remote location

• Personal belongings of staff: Usually not organizational assets.
• DR line-item revenues: Revenue is a financial impact, not a physical asset.
• Cloud-based applications: These are primarily logical or information-processing assets, even though they depend on physical infrastructure.

• The explanation states that Traffic Analytics can be enabled by a user with one of these subscription-level roles:

• Question 34 — Network Contributor: Yes
• Question 35 — Owner: Yes
• Question 36 — Reader: Yes, according to the stated explanation and documentation

Why B works

• AWS KMS keys are Regional resources. A normal customer managed key in Region A cannot be used directly in Region B.
• A customer managed multi-Region KMS key (MRK) has related key replicas in both Regions. The replicas share key material and key ID, although each has a Regional ARN.
• With client-side encryption, the application encrypts the data before storing it in S3. Cross-Region replication then copies already-encrypted objects, so S3 does not need to decrypt and re-encrypt them with a different Regional key.

Why the other choices are weaker

• A and C: SSE-S3 uses Amazon-managed S3 keys, not the required customer managed KMS key.
• D: SSE-KMS can work only if the solution creates and configures the appropriate KMS key or multi-Region key replica in each Region. As written, it says to create a customer managed KMS key in each Region, which implies separate keys—not the same KMS key. Replication also requires additional KMS permissions and destination encryption configuration.

• Use a field on Account to show the aggregated yearly shipments (a Roll-Up Summary).
• A Master-Detail relationship between Shipment and Account is required for Roll-Up Summary to work (and to ensure access is governed by the parent Account).
• OWD and the relationship type determine what users can see. If you want to restrict shipment-level access while still showing a summary on Account, Private OWD on Shipment plus Master-Detail helps, because access to shipments is controlled by the Account record.

• A (Public OWD on Shipment with Process Builder and a Lookup to Account): Not ideal. Public access would expose shipments broadly, and a lookup cannot support a built-in roll-up summary.
• B (Private OWD on Shipment, Roll-Up Summary, Master-Detail to Account): Best answer. Private shipments, but because of Master-Detail, access and the roll-up are tied to the Account. The Account can show the yearly total via a Roll-Up Summary field.
• C (Controlled by Parent on Shipment, Trigger, Master-Detail): Master-Detail is correct, but using a trigger is unnecessary for a straightforward roll-up; roll-ups are the standard, maintainable solution.
• D (Private OWD on Shipment, Trigger, Lookup to Account): More complex and not as efficient; no automatic roll-up, and lookup breaks the ease of summarizing by Account.

• Honeypots: Decoy systems or services designed to attract attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of unauthorized activity. Security teams can also observe attacker behavior.

• DNS sinkhole: Redirects requests for known malicious domains to a controlled internal server or blocks them. If an infected workstation attempts to contact command-and-control infrastructure, the sinkhole records the request and helps identify the compromised device.

• Tokenization: Protects sensitive data by replacing it with tokens.
• CI/CD: Automates software development and deployment.
• Threat modeling: Identifies potential risks before or during system design.
• Data obfuscation: Makes data harder to understand, but does not detect intruders.

• A (training data, hyperparameters, stakeholder feedback) focuses on training provenance; these details are important but are typically part of pre-deployment/training records, not the primary post-deployment documentation.
• B (encountered issues, monitoring process, risks) relates to governance and monitoring rather than the core documentation you’d publish about the deployed model itself.
• C (licensing information, the team, business goals) covers governance context but not the technical traceability and performance-based record needed for ongoing maintenance.

• IaaS: You deploy and manage virtual machines, operating systems, disks, and networking. Azure manages the physical datacenter and host infrastructure.
• PaaS: Azure manages the operating system and runtime so you can focus on deploying applications, such as with Azure App Service or Azure Functions.
• SaaS: You consume a complete, provider-managed application.

• The Scrum Guide specifies four required events: Sprint Planning, Daily Scrum, Sprint Review, and Sprint Retrospective. These events enable transparency, inspection, and adaptation.
• The other items listed are not mandatory under Scrum:

• The 99.99% availability SLA for VMs is achieved when you run VMs across two or more Availability Zones.
• Two VMs in a single Availability Zone do not meet the 99.99% target (their SLA is lower, e.g., around 99.95% or less depending on configuration).

• Deploy at least two VMs across two different Availability Zones (one VM in each zone, or both in two zones with a load balancer).
• This provides the required zone redundancy and the 99.99% SLA.

• 25 — Traditional SMTP server-to-server mail transfer; not normally used for secure client submission.
• 110 — POP3, used to retrieve email and typically unencrypted.
• 143 — IMAP, used to access email and typically unencrypted.

• A recipient who already has a Microsoft account or an organizational account can authenticate by signing in.
• A recipient without a usable Microsoft identity may receive a one-time passcode by email.
• The passcode is sent to the same email address that was invited and is used to verify ownership of that address.

• You normally do not create a new sensitive information type for credit card numbers. Microsoft Purview already provides a built-in Credit Card Number sensitive information type.
• The required sequence should generally be:

• Answer: A — EC2 Image Builder

• Why: EC2 Image Builder is AWS’s fully managed service designed to automate the creation, testing, and ongoing management of custom EC2 AMIs. It lets you build image pipelines that start from a base image, apply software/components, run tests, and publish/distribute the resulting AMIs across regions or accounts.

• How it works (high level):

• Why not the other options:

• Quick tip: Use EC2 Image Builder to reduce manual image maintenance and drift, and to enforce consistent, tested base images across environments.

• Batch processing, such as scheduled data transformations
• Streaming processing, such as continuously ingesting events

• Manipulating data with multiple languages: Mainly a benefit of Databricks and Spark.
• Real-time notebook collaboration: A workspace/notebook feature.
• Alerts for query failures: A Databricks SQL or job-monitoring feature.
• Distributing complex operations: Primarily a Spark compute capability.

• The inference container image or built-in algorithm
• The location of model artifacts in Amazon S3
• IAM permissions through the execution role
• Optional environment variables and networking settings

1. Create AWS::SageMaker::Model
2. Create an AWS::SageMaker::EndpointConfig that references the model
3. Create AWS::SageMaker::Endpoint that references the endpoint configuration

• AWS::SageMaker::Endpoint hosts a model but does not define the model itself.
• AWS::SageMaker::NotebookInstance provides a development environment.
• AWS::SageMaker::Pipeline orchestrates ML workflow steps.

• Dynamics 365 Remote Assist — used for remote collaboration and mixed-reality scenarios.
• Dynamics 365 Finance — supports financial and operational management.
• Dynamics 365 Business Central — designed primarily for small and medium-sized businesses’ finance and operations.
• Dynamics 365 for Phones — provides mobile access to Dynamics 365 apps, including Sales, through the mobile Unified Interface.

• Port 515: LPD/LPR line-printer service
• Port 631: IPP — Internet Printing Protocol
• Port 9100: JetDirect/RAW printing, commonly used by network printers

• Linux machine: Linux could run these services, but the three printer-specific ports strongly indicate a printer.
• Router: Routers may use Telnet and HTTP, but normally would not expose ports 515, 631, and 9100 together.
• Windows machine: Windows can share printers, but this particular service combination is more characteristic of a network printer’s embedded operating system.

• In the AWS shared responsibility model, AWS manages the security of the “infrastructure,” including the physical hardware and underlying virtualization.
• The customer is responsible for everything else in the cloud stack: the guest OS on EC2, the NoSQL database software running on it, data, patching the OS, and configuring access controls like security groups.
• So, for a self-managed NoSQL database on EC2, AWS would handle the physical hardware, while you would patch the guest OS and manage DB availability, backups, and security.

• Help the team identify the causes of delays.
• Encourage continuous improvement through retrospectives.
• Support the team in changing its process, tools, or collaboration methods.
• Help remove impediments that the team cannot resolve independently.

• A: An impediment log may help, but simply maintaining it does not ensure the impediments are resolved.
• B: Directing the team to solutions conflicts with agile self-management.
• C: Adding impediments to the product backlog could delay their resolution and treats them like product features.

• A private IP address on the virtual network
• An associated public IP address

• IPsec: Protects traffic at the network layer, commonly for VPNs; it is not WPA2’s authentication protocol.
• SSL: Protects specific application sessions and has largely been replaced by TLS.
• SSH: Secures remote command-line administration.

• Basic: billing/subscription support only; no technical support requests can be opened.
• Developer, Standard, Professional Direct, and Premier: include technical support and allow opening new support requests.

• If option A corresponds to “Developer, Standard, Professional Direct, Premier,” that is the correct choice.
• If the option text is really “Premier only,” that would be incorrect per current Azure docs.

• View/inspect configuration: Possible.
• Modify the installed application or its S-Controls: Typically restricted in a test-drive org.

• A. Extranet
• B. VLAN
• C. Intranet
• D. VPN

• App Tag: a label that reflects the app’s enterprise readiness based on its Cloud Confidence Index (CCI) rating. It lets you quickly group apps (e.g., Poor, Average, Good) for policy decisions.
• App Score: a numeric value representing the CCI score. It provides a precise threshold you can use to enforce policies (e.g., block apps with Score below 50).

• You can create policies that block or restrict apps with a Poor App Tag or with an App Score under a chosen threshold.
• These two aspects let you filter cloud apps by CCI ratings during policy evaluation.

• CCL isn’t described as a real-time policy facet in this scenario.
• GDPR Readiness is a separate consideration and not the two CCI aspects used for real-time protection policy in this context.