Free H12-891_V1.0 Exam Braindumps
HCIE-Datacom V1.0 Questions 296–300 (page: 61)

Updated On: 10-Feb-2026

Is the following statement about the multicast address used by 0SPFv3 correct?

  1. RD routers use FF02: :6
  2. The DR router uses FF08::6
  3. All OSPF routers use FF02::5

Answer(s): A,C



Is the following information about BGP4+ described correctly?

  1. BGP4 can use dampening commands to suppress oscillations on IBGP routes.
  2. Modifying the RouterID of BGP causes the BGP connection between routers to be re- established.
  3. The Next Hop attribute in BGP4+ is represented by an IPv6 address, which can be the link-local address of the next hop.
  4. BGP4+ does not support route auto-aggregate

Answer(s): A,B



In Huawei switches, the hybird port can select vlan1 as an untagged vlan

  1. True
  2. False

Answer(s): A



The RSTP protocol provides a variety of protection functions, such as when the edge port is configured as a protection state, the edge port receives the BPDU packet processing method;

  1. Directly discard the BPDU packet
  2. Close the port
  3. After parsing the BPDU message, the relevant information is obtained
  4. Forward BPDU packets as required

Answer(s): B



Regarding the FTP protocol, is it correct in the description below?

  1. In ftP-style, the client completes the initialization of the TCP session for control and data
  2. In ftP Activee, the server side tells the client which port it expects to send data on by commanding "PORT"
  3. FTP always uses a TCP session to transmit control information and data information
  4. FTP always uses the TCP port to establish a data session and ICP port 21 to establish a control session
  5. FTP always uses TCP port 21 to establish a data session and TCP port 20 to establish a control session

Answer(s): A



Viewing page 61 of 123
Viewing questions 301 - 305 out of 610 questions


Post your Comments and Discuss Huawei H12-891_V1.0 exam prep with other Community members:

AI Tutor AI Tutor 👋 I’m here to help!