QUESTION: 33

Customers use Redhat Linux enterprise 6 LVM to manage user data disks in the cluster. When using pvmove data migration you can not enforce OK. What is a possible reason for this.

Pvmove command does not support Linux cluster.
Redhat Linux enterprise 6 version of lvm does not support the pvmove command.
You need to install the cmirror package and run it on the cluster server.
Need to lvm version down to 1.0 before using pvmove migration data.

Answer(s): C

Reveal Solution Next Question

A N8500 (V200R001) clustered NAS system with a set of storage units at the back end. Three RAID Groups, respectively named RG1, RG2, RG3 have been created on the storage unit. There are two LUNs under each RAID group, the capacity of each LUN is 12G.
The names are RG1-LUN1, RG1-LUN2, RG2-LUN1, RG2-LUN2, RG3-LUN1, RG3-LUN2, and all LUNs are
added to one in storage pool. The purpose is to create a file system based on these LUNs. What of the following will certainly create a failure?

fs create striped fs01 10g 3 RG1-LUN1, RG2-LUN1, RG3-LUN1 stripeunit = 2048 blksize = 8192
fs create mirrored fs02 10g 2 RG1-LUN2, RG2-LUN2 stripeunit = 2048 blksize = 8192
fs create mirrored-stripe fs03 10g 2 2 RG1-LUn1, RG2-LUN1 protection = disk stripeunit = 2048 blksize = 8192
fs create striped-miiro fs04 20g 2 3 RG1-LUn1, RG1-LUN2, RG2-LUN1, RG2-LUN2, RG3-LUN1, RG3- LUN2 protection = disk stripeunit = 512 blksize = 1024

Answer(s): C

Reveal Solution Next Question

QUESTION: 35

The Redhat Linux Enterprise 6 cp command is used to complete the operating system data migration. What steps are needed to verify the transfer? (Multiple choice)

Check if the size of the migrated file is the same as the original data.
Check if the number of documents corresponds to the original data
Check if each file with read and write permissions corresponds to the original data
Whether the time for reviewing the case file corresponds to the original data.

Answer(s): A,B,C

Reveal Solution Next Question

QUESTION: 36

HPUX system has two user volume groups: VG01 and VG02. If you execute the following commands: vgexport-v-s-p -m /tmp/vg01.map / dev / vg01 and vgexport-v -s -m /tmp/vg01.map / dev / vg02.
What will be available using vglist to view the volume?

vg01
vg02
vg01 vg02
empty

Answer(s): A

Reveal Solution Next Question

Free H13-629_V2.0 Exam Braindumps

QUESTION: 33

QUESTION: 34

QUESTION: 35

QUESTION: 36