Free H13-629_V2.0 Exam Braindumps
HCIE-Storage (Written) v2.0 Questions 146–150 (page: 31)

Updated On: 10-Feb-2026

When the storage controller BBU is damaged, the controller automatically sets the IO write policy to transparent and is locked to ensure data reliability. Before the fault is recovered, it can be forced to write back.

  1. True
  2. False

Answer(s): B



VMware's storage resources can be provided through VMFS, native direct-attached storage via ESXi host-FC / FCOE or iSCSI link of the shared storage. You can also share the file system over the NFS network to support third-party NAS storage.

  1. True
  2. False

Answer(s): A



The OceanStor 18500 uses the RAID 2.0 virtualization architecture. When planning to configure storage, which of the following is incorrect?

  1. A storage pool can create two types of LUNs, Thick LUN and Thin LUN
  2. When creating a storage pool, the minimum number of SAS disks in the hard disk domain where the storage pool is located is 9 disks when the performance layer RAID policy is selected as 8D + 1P
  3. In the RAID 2.0 virtualization architecture, the hot spare space in the storage pool is distributed on each member disk in the storage pool
  4. RAID 2.0 virtualization architecture, the storage pool can contain three storage tiers, and each tier can be configured with a number of different RAID strategies

Answer(s): D



OceanStor V3 does not start up normally within 15 minutes after the system is powered on. What can you use to log in to the storage system in order to locate this fault? (Multiple choice)

  1. Sys status view system status
  2. Through the dev status view system status
  3. Through the dev status view device management started
  4. Through dev status view device management started

Answer(s): A,C



The figure shows an N8500 (V200R001) NAS engine chassis. The two NAS engine nodes in the chassis form a two-node N8500 NAS cluster. Which description of the front-end and back-end network planning of the cluster is correct? (Multiple choice)

  1. On the slots of the same position on both nodes, such as A3 and B3, you must insert the same type of interface card.
  2. A5 and B5, A6 and B6 can be chosen to be networked, the key is how to make the network connections.
  3. If the back end of the engine cluster is to be directly connected to four control enclosures, add one FC HBA card in slots A2 and B2 for the controller enclosure of direct connection.
  4. A2, A3, A4 and B2, B3, B4 can be plugged into a 1Gb iSCSI or 8Gb FC interface module to connect with the business network.

Answer(s): A,C



Viewing page 31 of 74
Viewing questions 151 - 155 out of 364 questions


Post your Comments and Discuss Huawei H13-629_V2.0 exam prep with other Community members:

AI Tutor AI Tutor 👋 I’m here to help!