Huawei H13-711_V3.0 Exam Actual Questions
HCIA-Big Data V3.0 (Page 37 )

• What it says: you can add a cost when you adjust inventory, and that cost is posted automatically to a specific GL account.
• Reality: yes, you can adjust both quantity and value via an inventory adjustment journal. The cost on the journal line affects the inventory value.

• The general ledger postings are not arbitrary. the actual accounts used are determined by your item posting group and the system’s posting definitions. In practice, the adjustment debits/credits the appropriate inventory-related accounts (e.g., Inventory asset and a related offset such as an adjustment or COGS account) based on configuration.
• So, the cost change does not go to a single “manual” GL account you pick per line unless your posting setup maps to that account.

• The concept is true (you can adjust cost and have GL impact), but the claim that it posts to a single, specific GL account is oversimplified—the accounts come from your posting configuration.

• Answer:

• Why:

• Why the other centers aren’t the right fit here:

1. Create a new AMI or copy the existing AMI while specifying EBS encryption and an appropriate AWS KMS key.
2. This creates an encrypted AMI backed by encrypted EBS snapshots.
3. Copy the encrypted AMI to the destination Region, using a KMS key available there.
4. Launch the application stack from the encrypted AMI.

• B: AWS KMS does not encrypt an existing unencrypted AMI in place. You must create an encrypted copy.
• C: AWS Certificate Manager manages TLS certificates, not EBS or AMI encryption.
• D: Enabling encryption by default affects newly created EBS volumes and snapshots; it does not encrypt an existing unencrypted AMI during copying.

• Basic: Self-help only; no technical support or design assessment.
• Developer/Standard: Technical support, but generally not the full proactive architecture guidance required here.
• Professional Direct: Includes proactive guidance and architecture recommendations.
• Premier: Also supports this, but is not the minimum-cost option.

• Approval publish: Request approval from a manager of the knowledge base before moving the article into the publish state.
• Instant Publish: Immediately publishes a draft article without requiring an approval.
• Instant Retire: Immediately retires a published article without requiring an approval.
• Retire Knowledge: Moves a knowledge article to the retired state.

• These are the base knowledge workflows that control how articles move between states (Draft, Published, Retired) and whether approvals are required.
• The other options describe different lifecycle actions, but these four cover the standard publish/retire workflows in ServiceNow.

• The two correct options are:

• The two incorrect options:

• A separate scope using a /32 subnet: A /32 identifies one host, but it is not a practical DHCP scope for this purpose.
• A static IP within the DHCP range: This can cause an IP address conflict if DHCP assigns that address to another device.
• SLAAC: Used for automatic IPv6 address configuration, not for assigning a predictable IPv4 address through DHCP.

• En Cisco SD-Access, el fabric overlay se extiende hasta lo inalámbrico; los APs son nodos de borde del fabric y su tráfico queda dentro del overlay.
• El cliente inalámbrico genera tráfico que viaja por el overlay, pero no es un componente del fabric en sí.
• El WLC es principalmente una herramienta de gestión y control, no forma parte del overlay; el underlay es el transporte físico.

• What the HOTSPOT is testing

• The actual action you need on HyperV1

• Typical commands you’d use (depending on OS version)

• Why this matters for Q6

• Quick validation steps

• Correct answer: enable SLAAC on an interface (C)

• Why the other options are not correct:

• Correct answer: A
• What this is saying: You need to write a Transact-SQL query that uses REGEXP_SUBSTR to extract the ID from MessageText, and you should apply STRING_ESCAPE(MessageText, 'json') before calling REGEXP_SUBSTR.

• MessageText may contain JSON characters (quotes, backslashes, etc.). Escaping the JSON content first ensures the string you pass to the regex is safe and won’t confuse the regex engine.
• The pattern you apply with REGEXP_SUBSTR would then extract the first substring that matches your ID pattern from the (escaped) text.

• Example (conceptual):

• The question implies REGEXP_SUBSTR is available in this environment; some SQL Server and Fabric contexts don’t expose it natively in all versions. If REGEXP_SUBSTR isn’t available, you’d need an alternative approach (e.g., using built-in regex-like capabilities or CLR/UDFs).
• If you need the ID specifically from the first paragraph, you might first isolate the first paragraph and then apply REGEXP_SUBSTR, or compose a single pattern that anchors to the first paragraph.

• TCP is connection-oriented. It establishes a connection before data transfer using a three-way handshake (SYN, SYN-ACK, ACK), enabling reliable delivery, ordering, and flow control.

• UDP is connectionless. It sends datagrams without a prior connection and provides no guarantee of delivery, order, or protection against duplicates; any reliability is up to the application.

• B incorrectly states UDP uses acknowledgment packets; UDP has no built-in ACKs.
• C wrongly claims UDP provides reliable transfer and that TCP is connectionless.
• D misstates framing bits; neither protocol uses the listed TCP/UDP handshake bits in frames.

• A — SCIM synchronizes changes to user attributes from the identity provider to GitHub.
• B — SCIM deactivates GitHub accounts when users are removed or deactivated in the identity provider.
• D — SCIM automates user provisioning when new users are added to the identity provider.

• C: SCIM does not delete organization repositories.
• E: SCIM does not generate REST API authentication tokens.
• F: SCIM handles identity lifecycle management, not repository permission configuration based on roles.

• A. Flash the BIOS: Not the first move. A BIOS update can be risky when POST is failing. It’s better to first rule out simpler causes (like RAM seating). BIOS flashing is usually done if the CPU isn’t supported by the current BIOS, which you’d check after RAM seating.

• B. Check the CMOS battery: Possible but unlikely the immediate cause. CMOS battery issues would more likely cause BIOS settings to reset or clock problems. RAM seating is a more common, direct fix after a motherboard swap.

• D. Reinstall the old motherboard: Not a troubleshooting step for the new system. The goal is to get the new motherboard to POST, not revert to old hardware.

• C. Reseat the RAM: Correct because memory seating problems are the most common cause of POST failures after a motherboard swap. Re-seating ensures proper contact in the new board’s slots.

• Risk tolerance describes the organization’s overall risk appetite, not the risks themselves.
• Risk transfer is a treatment option (e.g., insurance), not a documentation artifact.
• Risk analysis assesses likelihood and impact but doesn’t establish ownership or thresholds in a formal register.

• Incidents & alerts — see how the phishing activity was detected, correlated, and investigated.
• Threat Explorer — search for the malicious messages, recipients, URLs, attachments, and campaign activity.
• Email and collaboration reports — assess how many users or messages were affected.
• Remediation details — verify whether messages were quarantined, removed, or otherwise contained.

• Microsoft 365 admin center — general tenant administration.
• Microsoft Entra admin center — identity and access management.
• Exchange admin center — mail-flow and Exchange configuration, rather than full phishing-incident investigation.

• Answer: A) Clear the Windows event logs

• Windows event logs (System, Security, Application) are key forensic artifacts. If an attacker clears these logs, there’s no built-in local record of actions taken, making it harder for investigators to trace what happened.

• Modify the system time: may misalign timestamps but does not erase past events and can be easily detected.
• Alter log permissions: could prevent new log entries, but it doesn’t remove existing ones and can raise alarms due to permission changes.
• Reduce log retention settings: affects only future logs; it doesn’t wipe already recorded activity.

• In real environments, defenders mitigate this risk with tamper-evident, centralized logging (remote SIEM, write-once storage, log integrity checks) to preserve evidence even if a host is compromised.

• Answer: D) Shadow IT

• Why: Shadow IT is when employees use unsanctioned tools or bypass IT controls (like the VPN) to access services, often without IT oversight. It’s an internal behavior, not an external attacker’s activity.

• Not these:

• Quick note: This creates risk due to lack of visibility and control. Mitigations include a defined approved-tools list, enforcing VPN usage, device management, and continuous monitoring.

• Multi-factor authentication
• A secure password change for users whose credentials may be compromised

• The answer: Question 51: C — Request trigger.

• To invoke a Logic App from an external service (here, the Azure Application Insights availability test) you need a trigger that starts on an incoming HTTP request. In Logic Apps, this is the trigger that exposes an HTTP endpoint — typically shown as "When a HTTP request is received" and referred to as the Request trigger.
• The other options aren’t appropriate:

• Create a Logic App with the Request trigger to generate a URL.
• Configure Application Insights to post the degraded-availability payload to that URL.
• Add actions (e.g., send email, follow-up) in the Logic App to notify the customer services team.

• Correct answer: A

• Why:

• Takeaway: For data exfiltration detection with ETD, opt for targeted data read audit logs on the designated resources to balance visibility and cost.

• The problem describes the class updating field-level security on some profiles. To prevent updating fields that are not updateable for the current user, you should check each field’s updateability before making changes. Use DescribeFieldResult.isUpdateable() (e.g., via Field.describe() on each field) to guard updates.

• A and D (With Sharing): Running a class with Sharing affects record visibility, not whether a field can be updated by a user. It doesn’t prevent updates to fields the user shouldn’t modify.
• C (WITH SECURITY_ENFORCED in SOQL): This enforces FLS/FRC during queries, but it doesn’t control whether the Apex code updates fields or modifies permissions. It’s not addressing the update behavior directly.

• The AWS Support Concierge is a specialized team within Enterprise Support whose primary role is handling billing and account questions and helping with account setup and getting started.
• They are not the source for architecture guidance or development assistance; those services are provided by Technical Account Managers (TAMs) or Solutions Architects as part of Enterprise Support.
• For technical support cases, customers typically interact with AWS Support engineers or the TAMs, not the Concierge. The Concierge may route or coordinate related requests, but they don’t provide the technical resolution.

• What Concierge does: billing and account inquiries, onboarding help, coordination with AWS support.
• What Concierge does not do: provide architecture/design guidance or in-depth technical support case resolutions.

cmd 
powershell.exe -ExecutionPolicy Bypass -File C:\Scripts\Configure-VM.ps1

• GPO logon script: Runs only when a user logs on, so configuration may be delayed and is user-dependent.
• GPO startup script: Can work, but requires the VMs to be domain-joined and introduces GPO dependency. It is not specifically tied to Windows deployment.
• Place scripts in a VHD: Merely makes the files available; it does not execute them.

python 
import azure.cognitiveservices.speech as speechsdk 


speech_config = speechsdk.SpeechConfig( 
    subscription="YOUR_KEY", 
    region="YOUR_REGION" 
)

Important Azure Speech SDK classes

• SpeechConfig

• AudioConfig

python 
  audio_config = speechsdk.audio.AudioConfig( 
      use_default_microphone=True 
  )

• SpeechRecognizer

python 
  recognizer = speechsdk.SpeechRecognizer( 
      speech_config=speech_config, 
      audio_config=audio_config 
  )

• SpeechSynthesizer

• AudioOutputConfig

 Bogotá, Colombia