Huawei H13-723_V2.0 Exam Prep
HCIP-Big Data Developer V2.0 (Page 53 )

• Default route: 0.0.0.0/0; used only when no more specific route exists.
• Network route: A route covering the destination, such as 10.10.13.0/24.
• Host route: An exact 10.10.13.10/32 entry in the routing table.
• Floating static route: A backup static route with a higher administrative distance.

• C: Develop the rule in the Rules Editor, define the events, match, and condition sections, then use the test rule feature. This directly validates the YARA-L rule without enabling it in production.
• A: UDM Search can help investigate data and refine filters, but it does not fully test YARA-L logic—especially complex event joins, match windows, and conditions.

• Physical: Protects facilities or equipment, such as locks and security cameras.
• Technical: Uses technology, such as firewalls, encryption, or access controls.
• Operational: Covers day-to-day actions and processes, such as training, backups, or incident response.
• Managerial: Includes policies, standards, risk assessments, and procedures.

• The application stores data on Amazon EBS volumes, so the encryption should be applied directly to those volumes.
• EBS encryption uses AWS-managed cryptographic operations and is designed to provide encryption at rest with minimal performance impact.
• The volumes are created during initial deployment, so they can be configured as encrypted when provisioned.

• B: Moving data to an encrypted S3 bucket changes the storage design and does not encrypt the EBS data the application uses.
• C: A custom encryption algorithm adds application overhead and is unnecessary.
• D: Ephemeral disks are temporary storage and can lose data when instances stop or terminate. Encrypting only the AMI’s root volume does not protect data stored elsewhere.

• A is incorrect: Flow Debugger is for debugging Salesforce Flows, not Trust Layer masking.
• B is incomplete/misleading: Requesting audit data may be part of reviewing the results, but collection and storage must first be enabled.
• C is correct: It describes the initial validation step.

• A: Knowledge of IT platforms, networks, and methodologies — Useful technical knowledge, but the CISO does not need to be the deepest technical expert.
• C: Regulatory and project management knowledge — Important, but compliance and projects must still support the organization’s broader needs.
• D: Managing people and resources — Essential for execution, but effective management of the wrong security priorities will not produce good results.

• Tracking who accessed or changed customer information
• Detecting unauthorized activity
• Supporting accountability and investigations
• Providing evidence for compliance and incident response

• Single sign-on not enabled: SSO improves convenience and centralized authentication, but it is not essential for access control.
• Complex passwords not required: This weakens authentication, but other controls may reduce the risk.
• Security baseline not consistently applied: A concern, but it is less specific and less immediately damaging than having no activity records at all.

• Custom domains: supported by Standard.
• Dedicated compute instances: Standard runs on dedicated Azure VMs.
• Load balancing: Standard supports scaling the app across multiple instances with traffic distributed between them.
• Storage: Standard provides more storage than the lower tiers.
• Cost control: Standard is cheaper than higher tiers while meeting the stated requirements.

• Free and Shared use shared infrastructure and are intended for basic/testing workloads.
• Basic provides dedicated instances, but the question’s expected answer treats Standard as the minimum tier providing the required load-balancing capability.

Manager role

DAX 
Country[Manager] = USERPRINCIPALNAME()

• Sales
• Human Resources

CFO role

• See sales for all countries
• See no Human Resources data

• Do not restrict the Country table or Sales table.
• Apply a filter to Human Resources that always returns false, such as:

DAX 
FALSE()

• Sales revenue is affected because internal sales are recorded at the transfer price.
• Operating profit is affected because revenue changes while costs may remain unchanged.
• Return on investment (ROI) is affected because ROI depends on operating profit and the division’s investment.
• Cost of components purchased is not affected by the transfer price. These are costs incurred when buying components from external suppliers, not the internal price charged for the division’s output.

• A — .gitignore: Controls Git tracking; it does not configure Copilot exclusions.
• B — copilot.ignore: This is not the standard GitHub Copilot Business exclusion mechanism.
• D — Renaming files: Adding _no_copilot has no recognized effect.

• SQL injection: Manipulates database queries through application input.
• XML external entities (XXE): Abuses XML parsers to access files, internal systems, or other resources.
• Cross-Site Request Forgery (CSRF): Tricks an already authenticated user’s browser into sending an unwanted request. It generally does not steal session cookies.

• Accept terms of use
• Enter a temporary code or credentials
• Provide basic registration information

• Enterprise authentication — Authenticates organizational users, often with centralized identity services; it is not specifically designed for temporary guest access.
• Ad hoc network — A temporary device-to-device network, not an authentication process.
• WPA3 — A wireless security standard. It protects Wi-Fi access but does not provide the web-based temporary access workflow described here.

• Scanning is not essential during a power outage.
• A scanner can consume UPS battery power without helping the user save cloud documents or shut down safely.
• The UPS should be reserved for the computer, monitor, and necessary network equipment.
• The surge protector helps protect the scanner from voltage spikes, but it will not keep it running during an outage.

1. Open the Microsoft Entra Connect wizard.
2. Select Configure.
3. Choose Customize synchronization options.
4. Authenticate when prompted.
5. On the Domain and OU filtering page, select:

1. Complete the wizard.

• Start-ADSyncSyncCycle only starts synchronization; it does not change which OUs are included.
• Manage federation configures federation settings, which are unrelated to OU filtering.
• Add-ADSyncConnectorAttributeInclusion concerns connector attributes, not selecting additional OUs for synchronization.

1. Search & Intelligence in the Microsoft 365 admin center — No

1. Audit in the Microsoft Defender portal — Yes

1. Audit in the Microsoft Purview portal — Yes

• Allow only approved MAC addresses
• Limit the number of learned addresses
• Shut down or restrict a port when a violation occurs

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but it is not the direct control for limiting MAC addresses on switch ports.
• NGFW: Filters routed network traffic, while this attack targets Layer 2 switch behavior.

• Asynchronous inference is designed for applications that submit individual inference requests, place them in a queue, and retrieve results later. It is useful when requests may take a long time or when traffic is intermittent.
• Batch transform is designed specifically to run inference over an entire large dataset stored in Amazon S3 and produce an output dataset.

• Large dataset/offline processing ? Batch transform
• Large or slow individual requests processed later ? Asynchronous inference

• CBWFQ (Class-Based Weighted Fair Queuing): Creates traffic classes and assigns each class a guaranteed bandwidth or queueing treatment.
• PQ (Priority Queuing): Uses multiple queues with strict priority. Higher-priority queues are serviced before lower-priority queues, making it useful for delay-sensitive traffic—but it can starve lower-priority traffic.

• FRTS: Traffic shaping for Frame Relay; it controls the transmission rate rather than selecting packets during congestion.
• CAR: Polices traffic by rate, typically dropping or remarking packets that exceed a limit.
• PBR: Policy-Based Routing; it selects forwarding paths and is not a QoS queueing mechanism.

• Response and resolution time frames
• Availability or uptime requirements
• Performance targets
• Support obligations
• Penalties for failing to meet requirements

• SOW (Statement of Work): Defines the project’s scope, tasks, and deliverables.
• MOA (Memorandum of Agreement): Describes cooperation and responsibilities between parties.
• MOU (Memorandum of Understanding): Records a general mutual understanding, usually without detailed enforceable service targets.

• Response and resolution times
• Availability or uptime
• Performance targets
• Support obligations
• Penalties for failing to meet commitments

• SOW (Statement of Work): Describes the work, deliverables, scope, and tasks.
• MOA (Memorandum of Agreement): Documents a formal agreement about roles or responsibilities.
• MOU (Memorandum of Understanding): Records a general mutual understanding, often without detailed service metrics.

• Self-signed certificate: Causes a browser security warning, not incorrect name resolution.
• Nameserver record: A DNS problem would typically affect multiple users, not just one workstation.
• IP helper: Relays services such as DHCP across network segments; it does not resolve website names.

• Self-signed certificate — Causes a certificate trust warning, not incorrect name resolution.
• Nameserver record — A DNS record problem would usually affect multiple users, unless only this computer uses a different DNS server.
• IP helper — Relays certain network services, commonly DHCP, between subnets; it does not normally determine website name resolution.

• 255.255.255.128 = /25: 128 total, 126 usable
• 255.255.255.192 = /26: 64 total, 62 usable
• 255.255.255.224 = /27: 32 total, 30 usable
• 255.255.255.240 = /28: 16 total, 14 usable

• One for the network address
• One for the broadcast address

• 8 total addresses
• 6 usable addresses
• Mask: 255.255.255.248

• Suspended an operator who correctly refused to use unsafe equipment.
• Rewarded another operator for using the equipment despite the broken safety guard.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — This factory’s safety record is likely to be poor.

• Domínios personalizados.
• Armazenamento suficiente.
• Instâncias dedicadas.
• Balanceamento de carga.
• Menor custo entre os planos que atendem a tudo.

• AWS Network Firewall can inspect and block traffic across a VPC when traffic is routed through the firewall. A Drop action rule can deny traffic from the suspicious source IP.
• GuardDuty findings are sent to Security Hub.
• A Lambda function can be invoked when Security Hub receives a new GuardDuty finding, extract the source IP, and update the Network Firewall policy with a blocking rule.

• GuardDuty threat lists: Used to identify or increase the severity of findings; they do not directly block VPC traffic.
• AWS WAF: Protects supported web applications, such as CloudFront or Application Load Balancers. It does not provide general VPC-wide traffic blocking.
• GuardDuty suppression rules: Suppress or hide findings. They do not block the suspicious traffic.

• A business-hours greeting
• An after-hours greeting
• A holiday greeting

• Weekday evenings/nights
• Saturdays and Sundays

1. Auto attendant 1

1. Auto attendant 2

• Controlar o fluxo de dados entre S3 e SageMaker;
• Aplicar regras de segurança por meio da VPC;
• Reduzir a exposição dos dados;
• Permitir acesso privado ao bucket do S3.

• Amazon Inspector: avalia vulnerabilidades, mas não gerencia o fluxo de dados.
• Amazon Macie: ajuda a descobrir e proteger dados sensíveis no S3, mas não cria a conexão com o SageMaker.
• S3 Glacier Deep Archive: é uma classe de armazenamento para arquivamento, não uma solução de conectividade.

• An Adj-SID does not necessarily need manual configuration.
• It can often be dynamically allocated by the router, although manual configuration may also be possible.
• The adjacency information is advertised through the IGP, such as IS-IS or OSPF.

• It is identified by an Adj-SID.
• It represents a particular adjacency of a node.
• Its meaning is generally local to the advertising node; unlike a Node-SID, it is not a globally reusable instruction across the network.

• The Azure DevOps (Boards only) connector is designed specifically for Azure DevOps Analytics views.
• It authenticates directly to Azure DevOps and lets you select an existing Analytics view.
• Filters defined in the Analytics view are applied by Azure DevOps before Power BI retrieves the data, reducing the amount of data transferred.

• Azure DevOps Server (Boards only) is for on-premises Azure DevOps Server.
• OData Feed can consume OData endpoints, but it is not the dedicated Azure DevOps Analytics-view connector.
• OData queries are not the intended dedicated connector for this requirement.

• SQL injection
• Cross-site scripting (XSS)
• Malicious or malformed web requests
• Some application-layer attacks

• Layer 4 firewall: Filters based mainly on IP addresses, ports, and transport protocols; it cannot deeply inspect web application content.
• NGFW: Provides advanced network filtering and may include application awareness, but a WAF is more specifically designed to protect web applications.
• UTM: Combines several security functions in one appliance, but it is not the most targeted solution for a web portal.

• Review administrative-role membership ? PIM access reviews
• Require justification for continued membership ? PIM can require justification when activating or maintaining privileged access
• Alerts about administrator assignment changes ? PIM alerts and notifications
• History of administrator activation ? PIM audit history
• See changes made to Azure resources ? PIM activation/audit information can be correlated with Azure Activity Logs

• Code signing: Verifies the software’s authenticity and integrity; it does not hide the source code or prevent reverse engineering.
• Tokenization: Replaces sensitive data with tokens, mainly for protecting data such as payment information—not software logic.
• Blockchain: Provides a tamper-resistant record of transactions or data; it does not protect compiled code from analysis.

• The backup file is complete and uncorrupted.
• The required data can actually be recovered.
• The recovery process and documentation work as expected.
• Recovery objectives, such as acceptable downtime, can be met.

• Backup logs may show that a job completed, but not that the backup is usable.
• File size does not prove the contents are valid.
• Email notifications may confirm process completion, not recoverability.
• Appointing a DBA does not itself validate backups.

• # Development
• # Testing
• # Production

• Separate endpoints: relate to compute or connectivity, not dashboard labels.
• Separate queries: retrieve or transform data but do not designate visual sections.
• Direct text written into the dashboard in editing mode: dashboards use text boxes, typically with Markdown formatting, rather than arbitrary text placed directly on the canvas.

• A hypervisor allows multiple virtual machines to run on one physical server.
• Each VM can have its own operating system, so the customer can consolidate Windows, Linux, and Unix servers.
• A Type 2 hypervisor runs on a host operating system and can be deployed on local hardware, helping address data privacy and avoiding ongoing public-cloud charges.

• Containers share the host operating system’s kernel.
• They are well suited to consolidating applications, but they generally cannot independently run a mix of unrelated kernels such as Windows, Linux, and Unix on one host.

• Run the backup with WITH CHECKSUM
• Store the backup on an SMB network share

sql 
BACKUP DATABASE DB1 
TO DISK = '\\FileServer\SqlBackups\DB1_full.bak' 
WITH CHECKSUM;

• DMS does not create the SQL Server backups for you.
• You must provide a valid full database backup.
• You must continue taking transaction log backups while the source database remains online.
• The full backup and subsequent log backups must be available in the SMB share that DMS can access.
• WITH CHECKSUM enables backup checksum validation, helping detect backup corruption.

1. Create a temporary Onboarding OU.
2. Move the new account into it.
3. Move the restrictive SCPs from the organization root to the Production OU.
4. Allow the account to update AWS Config.
5. Move the account into Production after onboarding.

• An SCP attached at the organization root applies to every account and OU beneath it.
• An SCP attached to the Production OU applies only to accounts in that OU.
• Therefore, moving the restrictive SCP from the root to Production temporarily exempts the onboarding account without weakening the policies for existing production accounts.
• Once onboarding is complete, moving the account into Production subjects it to the normal restrictions.

• Windows 11 Pro ? Windows 11 Enterprise
• Windows 10 Pro ? Windows 10 Enterprise

• A script of cloud CLI commands: IaC because the commands can be saved, reviewed, versioned, and rerun consistently.
• Manually run curl commands: Not necessarily IaC; they are manual actions unless organized into an automated script.
• A sequence of REST requests passed to an API: Could represent automation, but the wording does not explicitly say they are stored and executed as reusable code.
• Commands entered into a cloud console: Manual operation, not IaC.

• Label applied does not automatically exclude a file from Copilot.
• Encryption/usage rights determine whether Copilot can access the file’s content.
• If the user has no permission under Label2, File3 should be unavailable to Copilot for that user.
• File3’s label might be inherited by derived content only if File3 was actually processed and contributed by an authorized user; it should not be treated as contributing merely because it exists in the source set.

• The Intune device limit restriction does not apply in the normal way; DEM enrollment supports up to 1,000 devices.
• However, the Microsoft Entra maximum number of devices per user setting can still impose a limit when the enrollment creates an Entra device object.
• Therefore, a DEM account is not automatically unlimited. The effective limit depends on the Entra device setting and the enrollment/join type.

• A. Periodically rotate responsibilities: May reduce some risks, but it does not directly detect unauthorized changes.
• B. Review segregation-of-duties conflicts: Identifies incompatible access combinations, not whether a specific data change was unauthorized.
• C. Log changes in an outside application: Logs provide evidence, but someone must review and analyze them. Logging alone does not detect misuse.
• D. Independent review: Directly detects unauthorized changes and reduces the risk that the person making the change can conceal it.

• Virtual introductions: Team members share their role, experience, location, and working preferences.
• Online icebreakers: Short, informal activities such as “two truths and a lie.”
• Virtual coffee chats: Pair team members for informal, non-project conversations.
• Collaborative problem-solving: The team works together on an online puzzle or scenario.
• Retrospectives: The team discusses what went well, what did not, and how to improve.
• Working-agreement sessions: The team agrees on response times, meeting etiquette, communication channels, and handoffs.
• Recognition sessions: Members acknowledge one another’s contributions.
• Remote workshops: Teams jointly create plans, diagrams, or schedules using collaboration tools.