Huawei H14-231_V1.0 Exam Prep
HCIP-HarmonyOS Application Developer V1.0 (Page 26 )

• Windows 10 VMs
• Windows Server 2012 or later VMs
• Running VMs—they do not need to be shut down
• Debian 8.2+ VMs, assuming the specific version is supported
• Stopped or deallocated VMs

• A vulnerability scanner automates discovery of known vulnerabilities and misconfigurations across systems. It can contribute to a supply-chain assessment.
• A penetration test actively attempts exploitation and is usually limited to an agreed scope.
• SCAP standardizes vulnerability and configuration assessment data; it is not the analysis itself.
• Illumination tool is not a commonly defined CompTIA Security+ term.

Flat organisation

• Few levels of management
• A wide span of control—managers supervise many employees
• Shorter communication channels
• More employee autonomy and quicker decisions
• Fewer formal promotion levels

Tall organisation

• Many levels of management
• A narrow span of control—managers supervise relatively few employees
• A clear hierarchy and reporting structure
• More formal supervision and communication channels
• More obvious promotion and career stages

• The two correct options are:

• The two incorrect options:

• Admin access to the deployment pipeline (B) – lets the developers use the pipeline and deploy content.
• Contributor access to the Development and Test workspaces (E) – required to deploy items into those workspaces.
• Viewer access to the Production workspace (D) – lets them view Production content without allowing deployment or modification.

• Contributor access to Production (F), because that could allow changes or deployment there.
• Viewer access to Development/Test (C), because Viewer is insufficient for deployment.
• Build permission to Production semantic models (A), because building reports on a semantic model is not required merely to view Production items.

• A is correct: Days beyond the included period incur an extra daily charge.
• D is incorrect: Daily use after 10 days is not free.
• B and C: Data-transfer pricing can depend on the direction and service terms. The exam’s intended distinction is that the included device usage period is the clearly stated no-cost benefit.

• Goal: Identify the host that originated the infection, then label each remaining host as infected or clean based on log evidence.

• Logs to review (across hosts and firewall):

• How to identify the origin:

• How to classify other hosts:

• Quick tip: use the Reset All option if you want to re-run the scenario and practice again.

• nomes de pessoas;
• organizações;
• locais;
• datas;
• números de processos;
• leis ou contratos.

• NER = identifica informações específicas e classificáveis.
• Sumarização = reduz um documento e apresenta seus pontos principais.

• Use one Azure AD directory for the organization.
• Separate divisions with subscriptions and/or resource groups.
• Assign each division’s administrator appropriate Azure role-based access control (RBAC) permissions, scoped to their subscription or resource group.

• The user authenticates with the external Identity Provider.
• Salesforce receives the SAML assertion.
• Salesforce uses attributes in that assertion—such as username, email, first name, last name, and profile/community information—to create the user during the first login.
• On later logins, Salesforce updates or uses the existing user record.

• On-the-fly provisioning is a general phrase; the Salesforce capability being tested is specifically JIT provisioning.
• Salesforce APIs would require a separate integration and provisioning process.
• Identity Connect is designed primarily to synchronize users from an identity directory, not to create users at the moment of their first SAML login.

• A recipient who already has a Microsoft account or an organizational account can authenticate by signing in.
• A recipient without a usable Microsoft identity may receive a one-time passcode by email.
• The passcode is sent to the same email address that was invited and is used to verify ownership of that address.

• C — Schema.describeSObjects(new String[]{myObject})[0].fields.getMap()

• D — Schema.getGlobalDescribe().get(myObject).getDescribe().fields.getMap()

• A: sObjectType is not used this way, and fieldSet() is not the appropriate method for retrieving all fields.
• B: mySObject.myObject is not valid dynamic Apex syntax.

• Multiple AWS accounts: Create a separate account for each department or workload. This provides clear isolation and makes it easier to track each department’s usage and costs for chargeback.
• Consolidated billing: AWS Organizations can combine billing for multiple accounts into one central payer account. The company can still view costs by account while managing payment centrally.

• Placement groups: Control how EC2 instances are physically placed for networking or performance; they do not provide departmental billing separation.
• Edge locations: Infrastructure used by services such as Amazon CloudFront; unrelated to chargeback.
• AWS Config: Records and evaluates resource configurations and compliance; it is not a billing-separation mechanism.

• IaaS: You manage the virtual machine’s operating system, configuration, applications, and data. Azure manages the physical infrastructure and virtualization platform.
• PaaS: You deploy applications without managing the underlying operating system or servers.
• SaaS: You consume a complete application managed by the provider, such as Microsoft 365.

1. Selling price per unit: $750
2. Required annual return:

1. Required profit per unit:

1. Target cost per unit:

• Context: You’ve enabled auditing in Dataverse and need to trim audit data to free storage. The question asks which deletion options you can use.

• What the options typically mean:

• About the provided answer (A, C, D): The list includes “by column,” which isn’t a typical or supported way to purge audit data. The more plausible trio is A (by record), B (date range), and C (by table older than date). If the exam expects A, C, D, that seems incorrect or mis-stated in the source.

• Practical takeaway: To reduce audit storage, use per-record deletions, per-table purge by date, and/or date-range deletions as supported by the environment’s audit management UI or admin docs.

• Looking up accounts, contacts, and opportunities
• Logging calls and updating Salesforce records
• Accessing previously available customer information when temporarily offline

• Salesforce Touch App: Primarily an older tablet-focused experience, not the best general solution for the sales team.
• Custom hybrid app: Unnecessary development when Salesforce provides the required capabilities natively.
• SalesforceA: Intended mainly for Salesforce administrators, not sales representatives.

• Correct answer: D — AWS Migration Hub

• AWS Migration Hub provides a single location to track the progress of application migrations. It offers a centralized dashboard to view migration status across multiple tools and projects.

• AWS Application Discovery Service helps inventory and map on-prem applications and their dependencies, not a single progress tracker.
• AWS Application Migration Service (formerly SMS) performs the actual lift-and-shift migrations, but isn’t the centralized tracker itself.
• AWS Service Catalog manages catalogs of IT services for self-service deployment, not migration progress.

• Progress iteratively with feedback focuses on making improvements in manageable steps and learning from feedback.
• Optimize and automate focuses on maximizing value from resources and automating suitable activities.
• Start where you are focuses on assessing the current situation and reusing what already exists.

• Source: on-premises SQL Server Database1
• Destination: Fabric Warehouse Warehouse1
• Connectivity: on-premises data gateway

• Dataflow Gen1: Primarily for Power Query transformations and isn’t the best Fabric-native choice for this copy operation.
• KQL queryset: Queries data; it does not orchestrate copying from SQL Server.
• Notebook: Could perform custom code-based movement, but it is unnecessary and less direct than a pipeline.

1. The sender hashes the original message and sends the message plus its hash.
2. The receiver applies the same hashing algorithm to the received message.
3. The receiver compares the newly calculated hash with the sender’s hash.
4. Matching values indicate that the message was not altered in transit.

• A binary image is not the normal description of a hash result.
• Using a different algorithm produces a different type of digest, so the values cannot be directly compared.
• Hashing verifies integrity, but by itself does not prove who sent the message. Digital signatures or MACs address authentication and integrity together.

• vSmart controls the overlay control plane. It uses OMP to exchange routing information, distribute policies, and determine how WAN Edge devices reach one another.
• vManage is the centralized management and configuration platform.
• vBond is the orchestrator. It helps devices authenticate, discover controllers, and traverse NAT during onboarding.
• APIC-EM is not the SD-WAN control-plane component described here.

• Help the team identify the causes of delays.
• Encourage continuous improvement through retrospectives.
• Support the team in changing its process, tools, or collaboration methods.
• Help remove impediments that the team cannot resolve independently.

• A: An impediment log may help, but simply maintaining it does not ensure the impediments are resolved.
• B: Directing the team to solutions conflicts with agile self-management.
• C: Adding impediments to the product backlog could delay their resolution and treats them like product features.

• Amazon DynamoDB — Managed NoSQL database, not PostgreSQL.
• Amazon Athena — Serverless service for querying data in S3; intended for analytics, not OLTP.
• Amazon EMR — Managed cluster platform for big-data frameworks such as Hadoop and Spark.

• An Anypoint VPC provides private network connectivity for CloudHub applications.
• An IPsec VPN tunnel or AWS Direct Connect connects that VPC to the customer’s on-premises network without exposing the database to the public internet.
• The VPC and on-premises firewalls must allow the required traffic, routes, and ports.

• Static IP addresses only identify the application’s outbound traffic; they do not create a private network path to the database.
• A Dedicated Load Balancer does not replace the required network connection to the on-premises environment. It is also unnecessary merely to reach individual databases.
• Moving sensitive databases to a DMZ is not the intended architecture and could reduce their protection.

• Enable the owner dimension
• Allocate a standard costing inventory model

• Owner dimension (B): This dimension Lets you track who owns the stock. By enabling the owner dimension, items can be configured as either company owned or consignment (vendor-owned) when you create or edit items. Without enabling this dimension, you can’t designate ownership per item.
• Standard costing inventory model (D): Selecting a costing model determines how item costs are calculated and posted. Standard costing provides a fixed cost per unit, which is commonly used for agreed pricing scenarios like consignment arrangements for easier accounting and valuation. It helps ensure consistent cost treatment across transactions for items that can be owned by the company or on consignment.

• Batch dimension (A): Batch tracking is unrelated to ownership and isn’t required to support company-owned vs. consignment configurations.
• Moving average costing (C): This is an alternative costing method. It’s not required to enable ownership config, and the exam’s expected choice focuses on standard costing for this scenario.

• On-Demand: You pay by the hour with no long-term commitment. This is ideal for workloads that are infrequent or have highly variable usage. Since this job runs only 24 hours once per year, you pay only for those 24 hours, with no wasted upfront or long-term payments.
• Reserved Instances: Require a 1- or 3-year commitment and pay for capacity whether you use it or not. For a workload that runs just 24 hours a year, you’d be paying for most of the term unused, making it far less cost-efficient.
• Spot Instances: Can be interrupted whenever AWS needs capacity, which is unacceptable for an uninterruptible workload.
• Dedicated Instances: Generally more expensive and aimed at licensing or compliance requirements; not needed for this use case.

• Compensating control: The server is end-of-life, so it may no longer receive security patches or support. Placing it on a restricted VLAN provides an alternative layer of protection by reducing who can access it and limiting its exposure.
• Technical control: VLAN segmentation and access control lists (ACLs) are technology-based mechanisms that enforce network access restrictions automatically.

• Managerial: Policies, procedures, and governance—not network configuration.
• Physical: Locks, guards, or barriers.
• Corrective: Restores systems after an incident.
• Detective: Identifies suspicious activity rather than restricting access.
• Deterrent: Discourages behavior but does not enforce access rules.

• Correct answer: A. Inbound data transfer from the internet

• Why: AWS does not charge for data transferred into AWS from the internet. Inbound data transfer is free, regardless of the amount (in this case, 2 TB). The other options involve data leaving AWS or moving between AWS regions/AZs, which incur costs:

• Answer: False. Agents and managers CAN create knowledge articles from Community questions.

• Why: In ServiceNow, a Community question can be converted into a Knowledge article using the Create Knowledge (or Convert to Knowledge) action. This allows what customers asked to become a reusable article for others.

• How it works (high level):

• Permissions: This ability depends on having the right roles/permissions (e.g., agents or knowledge managers). If you don’t see the option, check your role assignments or the knowledge-management configuration.

• Quick take: If a question in Community is valuable for others, a trained agent can turn it into a Knowledge article, making it available for self-service.

• You normally do not create a new sensitive information type for credit card numbers. Microsoft Purview already provides a built-in Credit Card Number sensitive information type.
• The required sequence should generally be:

• User1 can sign in because the account is cloud-only. It does not depend on the on-premises domain.
• User3 can sign in because the account uses Password Hash Synchronization (PHS). Azure AD has a synchronized password hash and can validate the sign-in even when connectivity to on-premises Active Directory is unavailable.
• User2 cannot sign in because the account relies on Pass-through Authentication (PTA). PTA sends the authentication request to an on-premises PTA agent, which must contact a domain controller. With the internet connection from on-premises lost, that validation cannot occur.

• runParallel is defined as async, so it returns a Promise.
• To use the result, you attach a then handler (or use await inside another async function).

• A: “Async runParallel() .then(data);” is invalid. “async” is a keyword for function declarations, not something you put in front of a call, and you’d need a function as the then-argument.
• B: “runParallel().done(function(data){return data;});” .done is not standard in native Promises (it exists in some libraries). Without a compatible library, this won’t work.
• C: “runParallel().then(data);” is invalid because then expects a function as its argument; data is not a function.
• D: “runParallel().then(function(data){ return data; });” is valid (or equivalently, runParallel().then(data => data);).

• The robust, standard option is D.
• B could work only with a library that provides .done; otherwise it’s not reliable.

• Product Owner: May attend, but is not required unless also working as a Developer.
• Scrum Master: May attend to help facilitate or coach, but is not required.
• Developers: Must participate because the event is specifically for them.

• 2000::/3 — Global unicast, used for publicly routable IPv6 addresses.
• FC00::/7 — Unique local, used for private internal addressing.
• FE80::/10 — Link-local, used only on the local network segment and not routed between subnets.

• Who performed the action
• What action occurred
• When it occurred
• Where it originated
• Whether it succeeded or failed

• Investigating suspicious activity: Important, but investigation depends on having adequate audit data first.
• Storage allocation: Necessary for retention, but storage does not help if the records lack meaningful details.
• Actions after audit failure: Part of operational planning, not the primary assessment of the application’s audit capability.

• Drop violating frames
• Log or alert on the violation
• Shut down or restrict the port

• Load balancer: Distributes application traffic; it does not control switch MAC learning.
• IPS: May detect some network attacks but is not the primary control for switch MAC-table exhaustion.
• NGFW: Protects traffic crossing network boundaries, while MAC flooding occurs at the switching/LAN layer.

• The first step in risk management is to understand objectives, constraints, and drivers from those who care about the project. This stakeholder engagement helps identify what could go wrong and what risks are most critical.
• Only after you’ve gathered input from stakeholders should you identify risks and document them in the risk register. Updating the risk register (option C) is important, but it comes after identifying and analyzing risks.
• Options B (ensure resources) and D (revise the risk management plan) are actions that may follow once risks are identified and understood; they’re not the initial step.

• Correct answer: D – Do not enable default administrative accounts to ensure accountability.

• A – Do not use encryption methods … backups and sensitive information: Encryption helps protect data; not using it increases risk, not reduces insider threats.
• B – Do not allow administrators to use unique accounts during installation: We actually want unique admin accounts, not the opposite.
• C – Do not control the access to administrators and privileged users: Failing to control access directly enables misuse.

1. Identify every Region containing a replica.
2. Schedule deletion of the KMS key in each Region.
3. Use the minimum KMS waiting period: 7 days.

• A — Use the root user: Root access does not eliminate the need to schedule deletion for every regional replica. The problem is the multi-Region structure, not insufficient administrative permissions.

• C — Update the key policy: The policy already grants kms:* to IAM principals. Changing permissions does not delete the key or its replicas.

• D — Disable the key and schedule deletion in 30 days: Disabling can stop cryptographic use, but 30 days is slower than the permitted 7-day waiting period. It also does not address replicas in other Regions.

• Workspace: Stores notebooks, libraries, jobs, and other project resources.
• Notebooks: Interactive documents containing code, queries, visualizations, and explanations. Common languages include Python, SQL, Scala, and R.
• Clusters: Groups of virtual machines that run Spark workloads. Clusters can be started, stopped, and automatically scaled.
• Data access: Databricks can read from services such as Azure Data Lake Storage, Azure Blob Storage, and Azure SQL.
• Jobs: Automate notebooks or data-processing workflows on a schedule or in response to events.

• What wipe does: A factory reset that erases all data, apps, and settings and returns the device to the OOBE. It removes the device from management and resets identity.
• Why not for this scenario: The goal is to repurpose the same device to a new user with Autopilot. Autopilot Reset keeps the device’s Azure AD/Intune identity and re-provisions the device for the next user without a full wipe.
• What Autopilot Reset does: Removes user data and apps but preserves device identity and management connection, then reapplies the Autopilot provisioning for the next user.
• When you’d use wipe instead: If you’re selling or permanently discarding the device, or you truly want to scrub all traces and start fresh without re-enrolling.

• Strongest encryption algorithms: Choose the strongest available encryption and integrity options, typically AES with the largest key size and a secure integrity algorithm.
• Encrypt all traffic: Select tunnel mode rather than transport mode. Tunnel mode encrypts the entire original IP packet, which is appropriate for a site-to-site VPN between branch networks.
• Secret-password authentication: Configure a pre-shared key (PSK) on both VPN concentrators. The key must match at both ends.

• Planning — identify the need, objectives, resources and feasibility.
• Analysis — determine user requirements and examine the existing system.
• Design — specify how the new system will work.
• Implementation — build, test, install and introduce the system.
• Maintenance/evaluation — monitor and improve the system after implementation.

• Writing with Apache Spark, typically as Delta tables.
• Reading with Apache Spark for processing and analysis.
• Reading with T-SQL through the lakehouse’s automatically generated SQL analytics endpoint.
• Reading with KQL through Fabric’s query capabilities that can access lakehouse data.

• Eventhouse: Optimized for real-time and KQL workloads, but it is not the natural destination for Spark-based writes or general lakehouse storage.
• Datamart: Intended mainly for relational analytics and Power BI; it is not designed for Spark-based data ingestion.
• Warehouse: Primarily T-SQL-based and structured. It does not provide the same native Spark write experience or flexibility for semi-structured data.

• Correct answer: D) Amazon Aurora Serverless

• Aurora Serverless is serverless, so compute capacity scales automatically and can pause during idle periods. This minimizes ongoing administration and you pay only for actual usage, which is ideal for infrequent workloads.
• PostgreSQL on EC2 requires full OS and DB administration.
• RDS for PostgreSQL is managed but still involves provisioning capacity and some maintenance tasks.
• Aurora PostgreSQL (non-Serverless) is managed but requires you to manage capacity, though with some automation; it’s not as hands-off as Serverless for intermittent usage.

• Regional leads — Customer Community Plus

• Capacity planners — External Identity

• Customer Community does not provide the enhanced reporting/dashboard access required by regional leads.
• An Identity license is generally for internal Salesforce identity use and does not fit the external capacity-planning users as well as External Identity.

• What the goal is: You want to add guest (external) users to your Azure AD tenant contoso.com, one entry per external user in a CSV.

• The proposed solution uses New-AzureADUser for each external user. Why this isn’t correct: New-AzureADUser creates a regular (internal) user in your directory. It does not create a guest/B2B user invite. So you’d end up with 500 ordinary accounts, not guest accounts with external access.

• The correct approach: Use New-AzureADMSInvitation for each external user. This invites the external user to your directory and creates a guest user (a B2B collaboration user) in your tenant. The invited user then accepts the invitation and gains access as a guest.

• Azure AD vs directory/tenant: Azure AD is the cloud identity service. A directory (also called a tenant) is your specific instance of that service (contoso.com in your scenario). The terms are often used interchangeably in exams.
• Guest user vs internal user: A guest user is external to your organization; an internal user is created directly in your directory as a normal employee/user account.
• B2B invitation: The process of inviting external users so they can collaborate in your resources; New-AzureADMSInvitation is designed for this.

• Port 515: LPD/LPR line-printer service
• Port 631: IPP — Internet Printing Protocol
• Port 9100: JetDirect/RAW printing, commonly used by network printers

• Linux machine: Linux could run these services, but the three printer-specific ports strongly indicate a printer.
• Router: Routers may use Telnet and HTTP, but normally would not expose ports 515, 631, and 9100 together.
• Windows machine: Windows can share printers, but this particular service combination is more characteristic of a network printer’s embedded operating system.