Huawei H19-309 Exam Prep
Huawei Certified Pre-sales Associate-Cloud (Page 4 )

• 24 cores: Available in the Business Critical provisioned-compute configurations.
• Approximately 124 GB memory: Matches the memory capacity of the relevant Business Critical hardware configuration.
• More than 50,000 IOPS: Business Critical uses local SSD storage and provides the high I/O performance required here.
• 500 GB storage: Well within the tier’s supported capacity.

• Premium: The DTU-based Premium tier does not provide the required combination of compute, memory, and I/O characteristics.
• Hyperscale: Hyperscale is primarily intended for very large databases and independent storage scaling. It is not the best match for these specific high-memory and high-IOPS requirements.

• If the attachment is safe, it is released to the user.
• If malware is detected, the attachment is blocked or removed according to the policy.
• This reduces delivery delays without disabling malware scanning.

• Replace removes the original attachment and replaces it with a text file explaining that it was blocked. It does not primarily optimize delivery time.
• Block and Enable redirect blocks messages with suspicious attachments and can redirect them for review; it does not provide the required faster delivery experience.
• Monitor and Enable redirect is for observation and does not reliably block malicious attachments.

• Endpoint Manager: manages hosts and sensor-related settings.
• Falcon Investigator: supports investigation and analysis, but does not necessarily grant RTR access.
• Remediation Manager: handles remediation-related actions rather than interactive host access.

• Free: Doesn’t support the required custom domain and SSL configuration.
• Shared: Doesn’t provide the required SSL support or scalability.
• Basic: Supports multiple instances and SSL, but its storage limit is insufficient for the required 12 GB.
• Standard: Supports:

• The connected switch
• The switch’s port/interface
• Device and port descriptions
• Sometimes VLAN or management information

• IKE: Establishes security associations for IPsec VPNs.
• VLAN: Defines logical network segmentation; it does not identify a physical switch port.
• netstat: Displays local network connections and statistics, not the upstream switch and port.

• Lower order numbers appear first.
• For example, a variable with order 100 appears before one with order 200.
• The Sequence field is not the control used for catalog variable display order.
• The Default Value sets a value, not placement.
• The Choice field defines selectable options, not the variable’s position.

• When the MVP will be defined — the MVP should already be understood sufficiently when assessing the business case.
• What the MVP is — useful information, but not the key requirement tested here.
• That the MVP is the same as project viability — incorrect. The MVP helps test viability; it is not identical to viability itself.

• B — The most significant risks are held by SQ.

• C — SQ should recognise the cars as inventory.

• F — SQ recognises revenue when LM sells a car to a third party.

• A: LM does not hold the most significant risks.
• D: LM does not recognise the cars as inventory.
• E: SQ should not recognise revenue when cars are merely delivered to LM.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Sustainability
• Performance efficiency
• Reliability

• Undefined or blank values
• Relationship matching problems
• Duplicate or conflicting keys
• Errors when querying the model

• Normalize all values to upper- or lowercase in the source query or Power Query.
• Add an index or surrogate key when values that differ only by case must remain distinct.

• A is correct: It establishes the revised dates and identifies the effect on the critical path.
• B is premature: Stakeholders should be informed after the impact has been assessed and the updated schedule is understood.
• C is not automatically appropriate: Fast-tracking may introduce additional risk and should be considered only after analyzing schedule options.
• D is premature: Adding resources may not resolve a dependency and could increase costs without addressing the actual constraint.

Statement 1 — Correct

Statement 2 — Correct

• JobTitle: User1 and User3 only
• UsageLocation: User1, User2, and User3

• For a user whose source of authority is Windows Server Active Directory, attributes such as JobTitle are synchronized to Microsoft Entra ID. You must change them in on-premises AD; editing them in Entra ID is not allowed or will be overwritten.
• UsageLocation is a cloud-managed attribute used mainly for licensing and service availability. It can be set or changed in Microsoft Entra ID, including for synchronized users.

• Note the question number before leaving—for example, Question 38.
• Use the exam’s question navigator or Back/Previous button to return to that number.
• If you close or refresh the page, your position may not be saved, depending on the site. Reopen the page and select the question number again.
• Avoid using the browser’s Back button if it causes the exam page to reload; use the exam’s built-in navigation instead.

• A — Tables
• B — Named file formats
• C — Schemas
• E — Databases

Why these are correct

• Tables: Can be cloned using CREATE TABLE ... CLONE. The clone initially uses zero-copy cloning, so storage is shared until changes are made.
• Named file formats: Can be cloned as database objects, preserving the file-format definition.
• Schemas: A schema and its eligible objects can be cloned.
• Databases: A database and its eligible schemas and objects can be cloned.

Why the others are incorrect

• Shares: A share is an account-level data-sharing object, not a normal cloneable database object.
• Users: Users are security principals and cannot be cloned with CLONE.

• CBWFQ (Class-Based Weighted Fair Queuing): Creates traffic classes and assigns each class a guaranteed bandwidth or queueing treatment.
• PQ (Priority Queuing): Uses multiple queues with strict priority. Higher-priority queues are serviced before lower-priority queues, making it useful for delay-sensitive traffic—but it can starve lower-priority traffic.

• FRTS: Traffic shaping for Frame Relay; it controls the transmission rate rather than selecting packets during congestion.
• CAR: Polices traffic by rate, typically dropping or remarking packets that exceed a limit.
• PBR: Policy-Based Routing; it selects forwarding paths and is not a QoS queueing mechanism.

• Remote and global work: Access is based on the approved device, not a specific office or geographic location.
• Seamless login: Users may not need to repeatedly enter credentials on a recognized device.
• Limited equipment: It uses devices employees already have rather than requiring separate hardware.

• Geotagging: Restricts access based on location and may prevent legitimate remote work.
• Smart cards: Require issuing and managing additional physical equipment.
• Time-based logins: Limit access by time and do not provide a seamless authentication experience.

• Espionage: Stealing confidential information, often for a competitor or foreign entity.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: A cyberattack sponsored or conducted by a government.
• Shadow IT: Unapproved technology or services used outside IT oversight.

• Economy: Obtaining inputs at the lowest appropriate cost.
• Efficiency: Making the best use of resources, such as staff, money, and equipment.
• Effectiveness: Achieving the intended objectives or outcomes.

• Liability accounts (2000–2999) would incorrectly require dimensions, although they should have none.
• Expense accounts (6000–6998) would incorrectly require Customer, which should be optional.
• Account 6999 needs a separate rule because it requires all four dimensions, including Customer.

• 2000–2999: no dimensions
• 4000–4999: Department and Division required; Project and Customer optional
• 6000–6998: Department, Division, and Project required; Customer optional
• 6999: Department, Division, Project, and Customer required

• Repetitive and time-consuming
• Based on measurable conditions, such as last check-in time
• Easy to automate with alerts, dashboards, or scheduled reports
• Important for ensuring scan coverage

• Assigning custom recommendations usually requires analyst judgment and context.
• Analyzing false positives can sometimes be assisted by automation, but validation often requires human review.
• Rendering an additional executive report increases reporting activity rather than reducing a core operational workload.

• One network address
• Two usable host addresses—one for each router
• One broadcast address

• Router A: 10.2.1.1
• Router B: 10.2.1.2

sql 
ALTER TABLE dbo.DimCustomer 
ADD CONSTRAINT PK_DimCustomer 
PRIMARY KEY NONCLUSTERED (CustomerKey) 
NOT ENFORCED;

1. ALTER TABLE dbo.DimCustomer
2. ADD CONSTRAINT PK_DimCustomer PRIMARY KEY NONCLUSTERED (CustomerKey)
3. NOT ENFORCED

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but it is not the primary control for switch-port MAC learning.
• NGFW: Protects at network boundaries but does not directly limit MAC addresses learned on access ports.

apex 
for (Account updatedAccount : Trigger.new) { 
    AccountTriggerHelper.notinyxternalSystem(updatedAccount.Id); 
}

• Too many callouts: The callout occurs asynchronously in the future method, and each future transaction can perform its permitted callouts.
• Too many SOQL queries: The SOQL query is inside the future execution, not repeatedly in the trigger transaction.
• Callout from triggers not supported: Direct callouts from triggers are prohibited, but the trigger delegates the callout to asynchronous Apex, which is the correct pattern.

• A. Adjust resolution: Incorrect because an incompatible resolution usually causes no display, distortion, or an unsupported-mode message—not intermittent flickering.
• B. Swap the HDMI cable: Correct. Replacing the common, easily tested component is the appropriate troubleshooting step.
• C. Replace the projector: Incorrect because the issue also occurs with a monitor.
• D. Configure refresh rate: A mismatched refresh rate can cause visual problems, but the repeated flicker across displays points more strongly to the cable.

1. Create Workspace2 with Lakehouse2 — F
2. Migrate the Employee table to Lakehouse2 — E
3. Assign the data engineer the Contributor role for Workspace1 — D

Why

• Sharing Lakehouse1 would not provide the required isolation.
• Viewer access would not allow writing to Customer.
• Giving Contributor access to Workspace2 would expose the sensitive table.

• GPS coordinates
• Date and time the image was taken
• Camera or device information
• Image dimensions and software used

• Log data: Records generated by systems or applications, not normally embedded in image files.
• Encrypted data: Information intentionally encoded to prevent unauthorized access.
• Sensitive data: A broad classification, not the specific type of information being extracted.

• Restrict a port to a defined number of MAC addresses
• Use statically assigned or “sticky” MAC addresses
• Shut down or restrict the port when violations occur

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect suspicious network activity, but is not the primary control for limiting switch MAC entries.
• NGFW: Filters traffic at the network boundary; it does not directly prevent MAC table flooding on access switches.

• Additional running costs: $800
• Less depreciation: $300

• The $100 reduction in fixed production overhead absorbed is only an accounting reallocation. It does not represent an actual saving in total fixed overhead.

• Domain controllers, because the requirement specifically excludes them. However, note that both member servers and domain controllers run Windows Server, so OS targeting alone cannot distinguish them unless the targeting option allows selecting the relevant server role/version. In the usual exam interpretation, target the applicable server OS category.
• Client computers, because they run a client Windows operating system.

• Domain: Targets membership in a domain, not the computer’s operating-system type.
• Security Group: Would require creating and maintaining a group containing all member servers, increasing administrative effort.
• Environment Variable: Not designed to reliably identify member servers.

• Scale out during the hours when customer traffic is high.
• Scale in during low-demand periods, reducing instance-hours and cost.
• Use scaling policies based on metrics such as CPU utilization or request count.

• Multiple Availability Zones: Improves availability and fault tolerance, but does not automatically reduce cost.
• Placement group: Helps with specialized performance or low-latency requirements, not cost optimization.
• Private subnets: Improve network security, but do not automatically adjust capacity or reduce EC2 usage costs.

• Orders contains order-level information, such as the order date.
• Order Line Items contains the products, quantities, and line amounts associated with each order.
• Merging them on the order key, such as OrderID, places the order date alongside each line item. This allows you to calculate total order value and analyze it over time.
• Product attributes can remain in the Products table and be related to the resulting line-item table through ProductID.

• Merging line items with products addresses product attributes but does not first provide the order-level date and value needed for time analysis.
• DAX calculated columns or lists add unnecessary model complexity.
• Calculating order counts is not the first requirement and does not combine the required order and line-item data.

• D — Value analysis: Correct. It examines an existing product to identify ways of reducing its cost while still providing the required functions, quality and reliability.
• E — Kaizen costing: Correct. It involves making continuous, small improvements and cost reductions while the product is already in production.

• Functional analysis: It is not limited to minimizing the cost of the originally defined functions. It examines what functions are required and how they can be provided at the lowest overall cost.
• Value engineering: Usually applies to the design and development of a new product, rather than being a fundamental redesign of existing organisational processes. That description is closer to business process re-engineering.
• Target costing: The target cost is generally established during the product development stage, before production begins. It is not continuously reset while the product is in production.

• Base table — the table containing common inherited fields
• Parent table — the table directly extended by the child
• Other tables in the hierarchy

• Matching hashes: The software likely has not changed.
• Different hashes: The software was modified or corrupted.

• Encryption: Protects confidentiality by making data unreadable; it does not primarily detect changes.
• Baselines: Define an approved system or configuration state, but they are not the specific integrity mechanism here.
• Tokenization: Replaces sensitive data with substitute values.

• The product is already in production.
• The organization is examining the product’s functions and cost drivers.
• The objective is to reduce cost without reducing perceived value or required quality.

• Kaizen costing focuses on continuous, usually incremental, cost reductions during the manufacturing stage. It is not specifically the systematic examination of a product’s functions.
• Standard costing compares actual costs with predetermined standards; it is a control technique, not a product redesign method.
• Process innovation concerns developing significantly improved production processes, rather than analysing the product’s functions and value.

• Tracking who accessed or changed customer information
• Detecting unauthorized activity
• Supporting accountability and investigations
• Providing evidence for compliance and incident response

• Single sign-on not enabled: SSO improves convenience and centralized authentication, but it is not essential for access control.
• Complex passwords not required: This weakens authentication, but other controls may reduce the risk.
• Security baseline not consistently applied: A concern, but it is less specific and less immediately damaging than having no activity records at all.

• Report on the discount approval time for quotes

• Dashboard of opportunity stage duration

• Lead conversion trends measure lead-generation effectiveness, not opportunity closing time.
• Campaign ROI evaluates marketing performance, not delays in the sales process.

• Input validation: Prevents malicious or malformed input within an application; it does not authenticate a software package.
• Secure cookies: Protect web-session cookies; they do not protect downloadable software.
• Fuzzing: Tests software by supplying unexpected input to find vulnerabilities; it does not verify software integrity.

• Assign endpoints to a group based on the result of one policy.
• Use that group as the scope of another policy.
• This effectively passes the endpoints from one policy’s processing flow to another.

• Escape to host: A virtualization attack where code escapes a guest VM and accesses the host system. Nothing in the scenario mentions virtualization.
• Browser extension: Can redirect or manipulate web-browser traffic, but not normally database-server traffic.
• Valid accounts: Describes using stolen or compromised credentials, not redirecting network traffic.
• Process injection: Injecting malicious code into a legitimate database or networking process could allow an attacker to alter how that process handles outgoing traffic.

• Suspended an operator who refused to use unsafe equipment.
• Paid another operator a bonus for using it.
• Prioritised short-term productivity over employee safety.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — The factory’s safety record is likely to be poor.

1. Wireless AP

1. Router

1. Firewall

1. Device placement

• File hashes
• Strings and metadata
• Binary or code structure
• Known malicious patterns
• Embedded indicators or signatures

• Sandbox: Executes the file in an isolated environment; useful for observing behavior, but usually slower.
• Network traffic analysis: Examines communications generated by a system or application, not the file itself.
• Package monitoring: Tracks software packages or installations and is not the primary method for examining malware signatures.

• Initial Intrusion: The compromised VPN account and stolen phishing credentials describe how the attacker first gained access, but that happened months earlier.
• Persistence: The scheduled tasks and recurring C2 connections show how the attacker maintained and automated continued access.
• Search and Exfiltration: This would involve locating and transferring data. The scenario does not primarily describe data discovery or theft.
• Cleanup: Cleanup involves removing evidence or covering tracks. Obfuscated scripts may make detection harder, but the main behavior here is maintaining access.

1. Open the Offenses tab

1. Open the offense details

1. Review contributing events

1. Analyze the attack chain

1. Investigate the assets

1. Validate and respond