Huawei H19-321 Exam Prep
Huawei Certified Pre-sales Specialist - Service Solution (Page 18 )

• Assign endpoints to a group based on the result of one policy.
• Use that group as the scope of another policy.
• This effectively passes the endpoints from one policy’s processing flow to another.

• Access List: controls whether a client is allowed or denied.
• Connect List: controls which wireless networks/APs a station may connect to.

• Active-active routers: Provide redundant Internet connections/devices. Both can operate, so traffic can fail over or be load-balanced.
• Active-active firewalls: Avoid a single firewall becoming a failure point while maintaining security inspection.
• Load balancers: Distribute requests across multiple web servers. If one server fails, traffic can go to the other.
• Redundant power supplies: A server with separate power supplies should connect to independent power sources or circuits.
• UPS A and UPS B: Provide backup power and redundancy. Ideally, each power supply is connected to a different UPS.
• SONET ring: A ring topology provides alternate paths if a fiber link or segment fails.

• A business-hours greeting
• An after-hours greeting
• A holiday greeting

• Weekday evenings/nights
• Saturdays and Sundays

1. Auto attendant 1

1. Auto attendant 2

• VLAN 10 for data
• VLAN 20 for voice

• A: Describes physical trunking or logical switch ports, not an SVI.
• B: An SVI can provide management access, but that is only one use—not the best description here.
• D: SVI use is not related to running out of physical ports.

• A is incorrect: Flow Debugger is for debugging Salesforce Flows, not Trust Layer masking.
• B is incomplete/misleading: Requesting audit data may be part of reviewing the results, but collection and storage must first be enabled.
• C is correct: It describes the initial validation step.

1. Create a temporary Onboarding OU.
2. Move the new account into it.
3. Move the restrictive SCPs from the organization root to the Production OU.
4. Allow the account to update AWS Config.
5. Move the account into Production after onboarding.

• An SCP attached at the organization root applies to every account and OU beneath it.
• An SCP attached to the Production OU applies only to accounts in that OU.
• Therefore, moving the restrictive SCP from the root to Production temporarily exempts the onboarding account without weakening the policies for existing production accounts.
• Once onboarding is complete, moving the account into Production subjects it to the normal restrictions.

• C. Case after-insert trigger that publishes a Platform Event

• D. Custom Apex controller that publishes a Platform Event

• A. Trigger with a callout: Salesforce triggers should not make direct synchronous callouts, and this tightly couples transaction processing to the external system.
• B. Workflow Rule with Outbound Message: This can react to record changes, but it cannot reliably capture a user clicking a menu item. It also does not provide the same flexible event-driven model as Platform Events.

• Installing software
• Applying configuration changes
• Calling PowerShell scripts
• Running setup or customization commands

cmd 
powershell.exe -ExecutionPolicy Bypass -File C:\Scripts\ConfigureVM.ps1

• GPO logon script: Runs only when a user logs on and depends on domain/GPO processing.
• GPO startup script: Runs during startup, but requires the VM to be domain joined and receives the applicable GPO.
• Place scripts in a VHD: Merely makes the scripts available; it does not automatically execute them.

• Internal hostnames and subdomains
• Network structure and naming conventions
• Servers and services
• Relationships between systems

• Determining ISP-assigned address space: Usually involves external registration and DNS information, not internal host discovery.
• Bypassing DNS sinkholing: Would require evidence that malicious DNS requests avoided redirection.
• Initial access: DNS queries alone do not show that the attacker gained access.
• Exfiltrating data: DNS tunneling can do this, but the snippet would typically show encoded or unusually long DNS queries.

• Deploy five individual VMs: This does not create a VM scale set.
• Modify Availability Zones or Size settings: These actions do not create the required scale set and add unnecessary steps.
• VM orchestration mode: This is Flexible orchestration, intended for more individually managed VMs and mixed configurations. It is not the best choice for a straightforward group of identical instances.

• T?o m?t Systems Manager Automation runbook d? ch?y l?nh kh?i d?ng l?i ?ng d?ng trên các EC2 instance.
• T?o m?t Amazon EventBridge rule ph?n ?ng khi CloudWatch alarm chuy?n sang tr?ng thái ALARM.
• Ð?t Automation runbook làm target c?a EventBridge rule.

1. Log c?a ?ng d?ng du?c ghi vào CloudWatch Logs.
2. CloudWatch alarm phát hi?n nhi?u l?i liên quan d?n vi?c restart.
3. Alarm chuy?n sang tr?ng thái ALARM.
4. EventBridge nh?n s? ki?n thay d?i tr?ng thái này.
5. EventBridge g?i Systems Manager Automation runbook.
6. Runbook restart ?ng d?ng trên các EC2 instance, không restart c? instance.

• A: SNS không tr?c ti?p g?i Systems Manager Automation runbook nhu m?t target native.
• B: Lambda có th? th?c hi?n vi?c restart, nhung ph?i t? x? lý vi?c xác d?nh instance và ch?y l?nh t? xa.
• C: Lambda ch? làm trung gian d? g?i runbook, không c?n thi?t vì EventBridge có th? g?i runbook tr?c ti?p.

• Accept: Acknowledging the risk and choosing not to take additional action.
• Transfer: Shifting the risk or financial consequences to another party, such as an insurer.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or access restrictions.
• Avoid: Eliminating the activity that creates the risk.

• Error correction (ECC): Improves data reliability but does not maximize bandwidth.
• RAM voltage: Increasing voltage may affect stability or speed, but it is not the primary method for increasing module bandwidth.
• Physical module size: Refers to the capacity or form factor of the RAM, not its data-transfer bandwidth.

• On VirtualNetworkA: enable Allow gateway transit.
• On VirtualNetworkB: enable Use remote gateways.

• Amazon EC2 instances — ???????? ?? ?? ??????? CPU, memory ??? instance size ???????? ???????
• AWS Lambda functions — memory configuration ?????????? ???????
• Amazon EBS volumes — volume type ?? size optimize ???? ???????
• ??????? ECS workloads — resource configuration ? cost optimization-?? ???????

• Memory ? compute usage ?????????? ???? custom code ????? ???? development ? maintenance ??????
• Cost allocation tags ???? ????? ??? ?????? ???? ??????? ???; inefficient resource ??????? ?? recommendation ???? ???
• CloudTrail resource ???? ?? API activity ??????, resource utilization ????

• B — Both inner and outer classes can be declared as with sharing.

• C — Inner classes do not inherit sharing settings from the container class.

apex 
public with sharing class OuterClass { 
    public with sharing class InnerClass { 
        // Explicitly uses sharing rules 
    } 
}

• Two-part tariff pricing: $10 per unit
• Dual pricing: $20 per unit

Two-part tariff pricing

Dual pricing

• Division X, the seller, is credited with the market price: \(\$20\)
• Division Y, the buyer, is charged the marginal cost: \(\$10\)

• Streams — track change data for tables or views.
• External tables — reference data stored in an external cloud storage location.

• Role — account-level security object.
• Warehouse — account-level compute resource.
• User — account-level security object.
• Share — account-level object used to share data.

• The S3 bucket as an origin for static content
• The Application Load Balancer (ALB) as an origin for dynamic content
• An Amazon Route 53 alias record pointing the application domain to CloudFront

Why this works

• Static data: CloudFront caches objects from S3 at edge locations, reducing latency for users worldwide.
• Dynamic data: CloudFront forwards requests that require application processing to the ALB. It can also maintain persistent connections and use the AWS global edge network to improve delivery performance.
• One domain: CloudFront behaviors can route different path patterns to different origins—for example, /static/* to S3 and other paths to the ALB.

Why the other options are incorrect

• Global Accelerator is designed primarily for accelerating traffic to applications with endpoints such as ALBs, not for caching S3 content.
• Using separate domains or splitting static and dynamic traffic adds unnecessary complexity.
• CloudFront already provides the required global edge distribution and caching, so combining it with Global Accelerator is unnecessary here.

• Shared capacity

• Fabric capacity — F SKUs

• Fabric trial capacity

• Existing Power BI Premium — P SKUs

• VPC: A logically isolated virtual network within a cloud provider; it describes network design, not the user-access model.
• NFV: Runs network services as software instead of on dedicated hardware.
• SaaS: Delivers software over the internet. Although the application may be delivered as SaaS, the question emphasizes its availability to multiple user groups, which points to multitenancy.

• A — Technical review by business owner: A business owner may approve the business impact, but a technical review is normally performed by technical personnel.
• C — Cost-benefit analysis after implementation: Cost-benefit analysis should occur before implementation to support the approval decision.
• D — Business continuity testing: This can be appropriate for major changes, but it is primarily part of business continuity and disaster recovery planning—not a universal change-management activity.

• The audience and stakeholders
• The complexity and type of requirements
• The communication method and level of detail needed
• Whether to use diagrams, models, documents, demonstrations, or slides

• B: Authority to host the presentation is not the key preparation activity.
• C: Stakeholder sign-off may occur later; presenting requirements does not always require formal approval beforehand.
• D: A scribe may be useful in a meeting, but hiring one is not a core preparation requirement for presenting.

• Active remediation actions role in Microsoft Defender for Endpoint

• Security Reader role in Azure AD/Entra ID

• Security Administrator is broader than necessary because it grants extensive security-management permissions, violating least privilege.
• Compliance Data Administrator is intended for compliance data management, not Defender for Endpoint remediation approvals.

1. Search & Intelligence in the Microsoft 365 admin center — No

1. Audit in the Microsoft Defender portal — Yes

1. Audit in the Microsoft Purview portal — Yes

• A — .gitignore: Controls Git tracking; it does not configure Copilot exclusions.
• B — copilot.ignore: This is not the standard GitHub Copilot Business exclusion mechanism.
• D — Renaming files: Adding _no_copilot has no recognized effect.

• Measurement bias: Errors in how features or labels are measured, such as unreliable camera data or inconsistent labeling.
• Observer bias: A human evaluator’s subjective judgment influencing observations or labels.
• Confirmation bias: Favoring information that supports an existing belief.

• The connected switch
• The switch’s port/interface
• Device and port descriptions
• Sometimes VLAN or management information

• IKE: Establishes security associations for IPsec VPNs.
• VLAN: Defines logical network segmentation; it does not identify a physical switch port.
• netstat: Displays local network connections and statistics, not the upstream switch and port.

• Atomicity: a write fully succeeds or does not appear.
• Consistency: table state remains valid.
• Isolation: concurrent operations do not corrupt one another.
• Durability: committed changes persist.

• Flexible schemas: common data lakes often support flexible or schema-on-read data.
• Open-source formats: common data lakes commonly use open formats such as Parquet.
• Scalable storage: cloud data lakes already provide scalable storage.

• miami.weyland.com requires a custom domain, which is not available in the Free tier.
• Two instances require a tier that supports scaling out. Standard supports multiple instances.
• SSL support is available in Standard.
• 12 GB of storage exceeds the storage limit of the Basic tier in the older Azure pricing model used by this question.
• Standard provides sufficient storage and features while being cheaper than higher tiers—though higher tiers are not listed here.

• Free/Shared: insufficient features for custom domains, SSL, and multiple instances.
• Basic: supports some production features, but its storage capacity is insufficient for the required 12 GB.

• 25 – Traditional SMTP server-to-server mail transfer; often blocked for client submission and not inherently secure.
• 110 – POP3 for receiving email; unencrypted by default.
• 143 – IMAP for accessing email; unencrypted by default.
• 587 – Authenticated email submission and commonly secured with TLS.

• Virus signatures: Primarily associated with antivirus or antimalware tools.
• Security agent deployment: Usually handled by endpoint-management or endpoint-security platforms.
• Vulnerability scanning: Performed by vulnerability-assessment tools, although a SIEM may ingest their results.

• Reduce the training data: Usually makes overfitting worse.
• Add hyperparameters: Hyperparameters already control training; simply adding them does not solve the problem. Proper tuning could help, but that is not what the option states.
• Increase training time: More training can worsen overfitting if the model is already memorizing the training data.

• Asynchronous inference is designed for applications that submit individual inference requests, place them in a queue, and retrieve results later. It is useful when requests may take a long time or when traffic is intermittent.
• Batch transform is designed specifically to run inference over an entire large dataset stored in Amazon S3 and produce an output dataset.

• Large dataset/offline processing ? Batch transform
• Large or slow individual requests processed later ? Asynchronous inference

• Training or coaching
• Mentoring
• Additional support or resources
• Targeted performance improvement plans

• A: Recognition may be appropriate, but awards do not address identified gaps.
• C: Rotating schedules does not necessarily improve the specific competencies that are missing.
• D: Assessment results should be handled sensitively, but keeping them entirely private prevents useful feedback and development discussions.

• NAT traversal: Helps WAN Edge, vSmart, and vManage devices discover how to reach one another through NAT.
• Initial orchestration: Authenticates and introduces devices when they first join the SD-WAN fabric.
• Connection brokering: Provides information that allows devices to form their required control connections, after which the vBond is generally not in the data path.

• WAN Edge: Forwards user traffic and forms secure tunnels.
• vSmart: Controls the overlay control plane and distributes routes and policies.
• vManage: Provides centralized management, configuration, and monitoring.

• Reconnaissance: Gathering information about the target.
• Weaponization: Creating or combining a malicious payload with a delivery method.
• Delivery: Sending the payload, such as through phishing.
• Exploitation: Triggering a vulnerability or weakness to gain execution or access.

• JobTitle: User1 and User3 only
• UsageLocation: User1, User2, and User3

• For a user whose source of authority is Windows Server Active Directory, attributes such as JobTitle are synchronized to Microsoft Entra ID. You must change them in on-premises AD; editing them in Entra ID is not allowed or will be overwritten.
• UsageLocation is a cloud-managed attribute used mainly for licensing and service availability. It can be set or changed in Microsoft Entra ID, including for synchronized users.

• A. PsFile — Correct: Displays files opened remotely on a system. This reveals shared resources and user activity.
• B. UserInfo — Correct: Gathers information about user accounts, supporting account and privilege enumeration.
• C. PsPasswd — Answer key lists it: This is questionable. PsPasswd is primarily used to change passwords remotely, not enumerate information. The key may classify it broadly as a Windows account-management tool, but it is not a strong enumeration example.
• D. WinSSLMiM — Incorrect: Used for SSL man-in-the-middle activity, not enumeration.

• D — Managers focus on keeping costs low in the short term to maximise profits.

• E — Managers are given incentives to meet or undercut budgets.

• F — Managers delegate responsibility simply to reduce their workload.

• Reporting relationships
• Organizational structures
• Leadership styles
• Team maturity
• Individual and group behavior
• Communication and motivation

• Acquire Project Team: Focuses on obtaining the people needed for the project.
• Develop Project Team: Focuses on improving team skills, relationships, and performance.
• Manage Project Team: Focuses on tracking performance, resolving issues, and managing changes within the team.

• Marketing users: Dynamic Forms can show all fields.
• Support users: Field visibility rules can display only the Support preference fields on the record page.
• Reporting: Both profiles can still report on all fields because Dynamic Forms controls page visibility, not the underlying field access.

• A — Two record types and page layouts: Page layouts can control field placement and editability, but they are less flexible for conditional field visibility and would not be the best fit here.
• C — Muting permission set: Permission-set muting is used with permission-set groups; it does not conditionally hide fields on a page.
• D — Field-Level Security: FLS would remove field visibility at the security level. If fields are hidden by FLS, users generally cannot report on or access those fields, conflicting with the requirement that both users report on all data.

• A — Use a custom controller: An Apex class can contain the page’s logic.
• C — Use a standard controller with extensions: The standard controller provides basic CRUD behavior, while an extension adds custom logic.
• E — Use a standard controller: Useful when the page works mainly with one Salesforce object and needs standard functionality.

• A page with no controller for static or controller-free content.
• A custom controller with extensions; extensions are not limited only to standard controllers.

• Annual interest payments net of tax relief (A): future cash outflows for the issuer.
• Redemption value (B): the final cash outflow when the bond is redeemed.
• Market value now (C): the cash proceeds received now, acting as the initial cash flow in the IRR calculation.

Statement 1 — Correct

Statement 2 — Correct

• CHAP: Uses a challenge-response exchange, so the password is not directly transmitted.
• IPsec: Provides authentication, integrity, and encryption for IP communications.
• EAP: An authentication framework that supports stronger methods, such as certificates or token-based authentication.

• AWS Network Firewall can inspect and block traffic across a VPC when traffic is routed through the firewall. A Drop action rule can deny traffic from the suspicious source IP.
• GuardDuty findings are sent to Security Hub.
• A Lambda function can be invoked when Security Hub receives a new GuardDuty finding, extract the source IP, and update the Network Firewall policy with a blocking rule.

• GuardDuty threat lists: Used to identify or increase the severity of findings; they do not directly block VPC traffic.
• AWS WAF: Protects supported web applications, such as CloudFront or Application Load Balancers. It does not provide general VPC-wide traffic blocking.
• GuardDuty suppression rules: Suppress or hide findings. They do not block the suspicious traffic.

• Driver node: Coordinates Spark jobs and runs in the compute environment.
• Worker node: Executes tasks and processes data.
• Databricks Filesystem (DBFS): Provides storage access for data used by compute resources.