Huawei H19-381 Exam Prep
HCS-Pre-sales-Intelligent Computing (Page 4 )

• Elasticity: Automatically increases or decreases resources based on demand.
• Scalability: The ability to increase capacity to handle more workload.
• Low latency: Minimizes network response time; it does not provide protection from failures.

CIMA P3 topics

• IT governance and systems strategy
• Systems development and implementation
• Change and project governance
• Strategic and business risk

• A — Plan for new systems: The committee should help identify and prioritise systems requirements and ensure planned systems support organisational needs.
• D — Consider competitive issues: New information systems may affect Y’s competitive position, service quality and efficiency. These strategic implications should be considered.
• E — Ensure the system meets company goals: This is a key governance responsibility. The committee should ensure the project remains aligned with Y’s objectives and delivers business value.

• B — Develop new systems: Detailed system development should be performed by IT specialists and project teams, not the steering committee.
• C — Manage the project: The project manager should handle day-to-day project management. The steering committee should provide oversight, challenge and key decisions, rather than manage daily activities.

• Reconnaissance: Gathering information about the target.
• Weaponization: Creating or combining a malicious payload with a delivery method.
• Delivery: Sending the payload, such as through phishing.
• Exploitation: Triggering a vulnerability or weakness to gain execution or access.

• Matching hashes: The software likely has not changed.
• Different hashes: The software was modified or corrupted.

• Encryption: Protects confidentiality by making data unreadable; it does not primarily detect changes.
• Baselines: Define an approved system or configuration state, but they are not the specific integrity mechanism here.
• Tokenization: Replaces sensitive data with substitute values.

• Additional running costs: $800
• Less depreciation: $300

• The $100 reduction in fixed production overhead absorbed is only an accounting reallocation. It does not represent an actual saving in total fixed overhead.

• Identify the causes of delays.
• Improve its workflow and collaboration.
• Adjust tools or development practices.
• Discuss improvements during retrospectives and apply them in future sprints.

• A: An impediment log can help track issues, but merely maintaining one does not remove the impediments.
• B: Directing the team toward solutions reduces team ownership and self-organization.
• C: Adding impediments to the product backlog may be appropriate in some cases, but it does not automatically ensure they are addressed promptly.
• D: Best reflects agile leadership: empowerment, continuous improvement, and removal of impediments.

• Defender for Servers is the Defender for Cloud plan that protects Azure VMs and generates security alerts that can be reviewed in Defender for Cloud.
• Azure Diagnostics extension collects guest OS monitoring data, but it does not onboard VMs to Defender for Cloud or provide Defender security alerts.
• Data connectors are used for Sentinel integrations.
• Azure Storage Analytics and workflow automation do not provide VM protection.

• Job compute isolates production pipelines from interactive development and terminates after the job completes.
• Autoscaling adds and removes workers during telemetry spikes, directly addressing bursty workloads.
• Photon can improve performance and reduce processing time, but it does not provide autoscaling, schema-drift handling, or exactly-once processing by itself.

• A — Shared compute: violates production isolation and can allow development workloads to affect ingestion.
• C — Larger fixed cluster: may improve capacity but cannot adapt efficiently to changing workloads.
• D — Disable autoscaling: directly conflicts with the requirement to handle telemetry spikes.

• Share files with the wrong people
• Use public links unnecessarily
• Fail to classify sensitive data
• Upload data to unauthorized services
• Misunderstand company sharing policies

• A — Step-up authentication: Helps protect administrator accounts, but does not directly address improper file sharing by users.
• C — Password complexity: Helps reduce password attacks, not accidental data disclosure.
• D — Mobile device management: Secures managed mobile devices, but does not directly control file-sharing behavior across the organization.

• Warehouse size: Larger warehouses use more credits per unit of time than smaller ones.
• Number of clusters: A multi-cluster warehouse can run multiple clusters, and each active cluster consumes credits. Therefore, increasing the maximum or active cluster count can increase consumption.

• Number of users: More users may cause more workload, but users themselves do not consume credits.
• Amount of data processed: Snowflake warehouses are not charged directly by the amount of data scanned. However, processing more data may cause the warehouse to run longer, indirectly increasing credits.

• A: Build a custom API — possible, but unnecessary as the primary solution and potentially more costly to develop and maintain.
• B: Use pre-built chatbots — these generally answer questions but may not support the required custom workflow and real-time actions.
• C: Fine-tune with sample data — improves model behavior but does not provide live database access.
• D: Google Cloud databases + Vertex AI — stores current inventory data and lets an AI agent retrieve it and take actions based on up-to-date information.

• terraform init is normally required first, especially for a new or changed working directory. It installs providers/modules and configures the backend.
• terraform plan previews the proposed changes.
• terraform apply applies those changes. It also creates a plan internally if you have not supplied a saved plan.

text 
terraform init 
terraform validate       # optional but recommended 
terraform plan 
terraform apply

• User1 (user1@contoso.com) — This is an external guest in the Fabrikam tenant. Assuming the guest uses email one-time passcode authentication, Azure AD emails a passcode to user1@contoso.com.
• User2 (user2@outlook.com) — An Outlook.com address can authenticate with a Microsoft account, so Azure AD uses that account’s authentication rather than sending an email OTP. The fact that User2 has never accessed Fabrikam resources does not by itself trigger OTP.
• User3 (user3@fabrikam.com) — This is an internal Fabrikam user, so the user signs in with the organization’s normal credentials and does not receive a guest OTP.

• Label applied does not automatically exclude a file from Copilot.
• Encryption/usage rights determine whether Copilot can access the file’s content.
• If the user has no permission under Label2, File3 should be unavailable to Copilot for that user.
• File3’s label might be inherited by derived content only if File3 was actually processed and contributed by an authorized user; it should not be treated as contributing merely because it exists in the source set.

• Installing software
• Applying configuration changes
• Calling PowerShell scripts
• Running setup or customization commands

cmd 
powershell.exe -ExecutionPolicy Bypass -File C:\Scripts\ConfigureVM.ps1

• GPO logon script: Runs only when a user logs on and depends on domain/GPO processing.
• GPO startup script: Runs during startup, but requires the VM to be domain joined and receives the applicable GPO.
• Place scripts in a VHD: Merely makes the scripts available; it does not automatically execute them.

• IaaS: You deploy and manage virtual machines, including the operating system and installed software. Azure manages the physical datacenter, hosts, and networking infrastructure.
• PaaS: Azure manages the infrastructure and operating system, while you deploy and manage your application code. Examples include Azure App Service and Azure Functions.

• Vulnerability scanner: Finds known technical weaknesses in systems or applications, but does not provide complete supply-chain visibility.
• Penetration test: Simulates attacks against defined targets; it is narrower than a full supply-chain analysis.
• SCAP: A set of standards and protocols for automated security configuration and vulnerability assessment, not a comprehensive supply-chain mapping tool.

• A — Use a custom controller: An Apex class can contain the page’s logic.
• C — Use a standard controller with extensions: The standard controller provides basic CRUD behavior, while an extension adds custom logic.
• E — Use a standard controller: Useful when the page works mainly with one Salesforce object and needs standard functionality.

• A page with no controller for static or controller-free content.
• A custom controller with extensions; extensions are not limited only to standard controllers.

• Third-party attestation: Provides independent confirmation, often for formal compliance reporting, but is not usually performed frequently.
• Penetration testing: Attempts to exploit vulnerabilities; it focuses on technical security, not overall compliance procedures.
• Vulnerability scans: Identify known technical weaknesses in systems, but do not evaluate whether policies and processes meet compliance requirements.

• CHAP: Uses a challenge-response exchange, so the password is not directly transmitted.
• IPsec: Provides authentication, integrity, and encryption for IP communications.
• EAP: An authentication framework that supports stronger methods, such as certificates or token-based authentication.

• C — Before update
• D — Before insert

apex 
trigger AccountTrigger on Account (before insert, before update) { 
    for (Account acct : Trigger.new) { 
        acct.Description = 'Updated automatically'; 
    } 
}

• In after insert and after update, Trigger.new records are read-only.
• Use after triggers when you need the record’s final database Id or want to create/update related records.
• Attempting to change a field directly in an after trigger causes a read-only error.

• To identify the number of errors: select Column quality. It shows the percentage and count of Valid, Error, and Empty values for each column.
• To resolve errors: use the appropriate error transformation:

• Run the backup with WITH CHECKSUM
• Store the backup on an SMB network share

sql 
BACKUP DATABASE DB1 
TO DISK = '\\FileServer\SqlBackups\DB1_full.bak' 
WITH CHECKSUM;

• DMS does not create the SQL Server backups for you.
• You must provide a valid full database backup.
• You must continue taking transaction log backups while the source database remains online.
• The full backup and subsequent log backups must be available in the SMB share that DMS can access.
• WITH CHECKSUM enables backup checksum validation, helping detect backup corruption.

• Form layout
• Related lists
• Dictionary settings
• UI policies
• Client scripts
• Views and field visibility

• Personalization usually affects only the individual user.
• System configuration can affect other users, depending on its scope and conditions.

• IKE (Internet Key Exchange) negotiates the IPsec security association, including:

• ESP (Encapsulating Security Payload) protects the data after negotiation by providing encryption and optionally authentication.
• AH provides authentication and integrity but does not encrypt traffic.
• TLS is used for protocols such as HTTPS, not for negotiating IPsec parameters.

1. Version 1.0.0.0 — original published version
2. Version 2.0.0.0 — newly created and published version
3. Version 3.0.0.0 — new version created when version 1 is restored

• B — Incorporate contextual output encoding/escaping: Encode untrusted data based on its context—HTML, attribute, JavaScript, or URL—so the browser treats it as data rather than executable code.
• D — Run untrusted HTML input through an HTML sanitization engine: Sanitization removes or neutralizes dangerous elements and attributes, such as script-related content, while preserving safe HTML where needed.

• A: Enabling client-side scripts does not prevent XSS. Script restrictions may reduce risk in some environments, but “enable” is not a general XSS control.
• C: Cookie inspection is unrelated to preventing injected scripts.
• E: The SameSite cookie attribute primarily helps mitigate CSRF, not XSS. It should not generally be described as an XSS prevention measure.

• Which host first communicated with the suspected malicious source
• Whether that host initiated suspicious traffic or merely received it
• Which other hosts show evidence of infection, such as connections from the originating host
• Which hosts have no related suspicious activity and are therefore clean

• An outbound connection to a suspicious external address
• A downloaded or executed malicious file
• Later lateral connections from that host to other internal systems
• Firewall logs showing the direction and timing of the traffic

• The requirement is an assessment of the Azure environment’s design, which requires a support plan offering proactive architectural guidance.
• Premier support would provide this capability, but it is a high-cost option.
• Since the requirement says to minimize expenses, Premier is not the best recommendation.
• A lower-cost plan with the required advisory/design-review capability—historically Professional Direct in Azure’s support-plan model—would be more appropriate.

• Security controls
• Processes and procedures
• Compliance evidence
• Performance against contractual requirements

• Service-level agreement (SLA): Defines expected service performance, such as uptime and response times.
• Memorandum of agreement (MOA): Documents a general agreement between parties, but does not necessarily provide audit rights.
• Supply chain analysis: Identifies risks across suppliers and dependencies, but is not a contractual mechanism for reviewing vendor controls.

• Deterrent control: The signs warning that people may be filmed can discourage unauthorized activity. They do not physically prevent the activity, but they may influence behavior.
• Detective control: CCTV detects or records activity so security personnel can identify incidents and investigate them later.

• Preventive: Stops an incident from occurring, such as a locked door.
• Corrective: Restores systems after an incident, such as backups.
• Directive: Instructs people what to do, such as security policies or warning instructions.
• Compensating: Provides an alternative control when the preferred control cannot be used.

DAX 
Sales % of Total = 
DIVIDE( 
    [Total Sales], 
    CALCULATE( 
        [Total Sales], 
        ALLSELECTED(Products) 
    ) 
)

DAX 
Total Sales = 
SUM(Sales[SalesAmount])

Why ALLSELECTED is required

• The numerator, [Total Sales], is evaluated for the current product.
• ALLSELECTED(Products) removes the current product’s visual filter when calculating the denominator.
• It preserves filters applied at the report, page, or slicer level.

Why not ALL(Products)?

DAX 
CALCULATE([Total Sales], ALL(Products))

• Deficiency found before patient use: usually does not require an adverse-event report because no patient exposure occurred.
• Event caused solely by the patient’s condition: may not be reportable if the device did not contribute.
• Malfunction protection operated correctly: generally exempt when the device’s safety mechanism worked as intended and prevented harm.

• D — Managers focus on keeping costs low in the short term to maximise profits.

• E — Managers are given incentives to meet or undercut budgets.

• F — Managers delegate responsibility simply to reduce their workload.

1. CALCULATE
2. AND
3. FILTER

DAX 
Transaction Category = 
CALCULATE( 
    MAX('Transaction Size'[Size]), 
    FILTER( 
        'Transaction Size', 
        AND( 
            Sales[Sales Amount] >= 'Transaction Size'[Minimum], 
            Sales[Sales Amount] <= 'Transaction Size'[Maximum] 
        ) 
    ) 
)

• FILTER examines the rows in the Transaction Size table.
• AND ensures the sales amount falls between the category’s minimum and maximum values.
• CALCULATE evaluates the result in the modified filter context and returns the matching category.