Huawei H31-311_V2.5 Exam Prep
HCIA-Transmission V2.5 (Page 9 )

• Link-local — FE80::/10; valid only on the local link/subnet and not routed by routers.
• Multicast — FF00::/8; identifies a group of interfaces rather than a private address range.
• Global unicast — 2000::/3; publicly routable IPv6 addressing.

• Honeypots: Deliberately vulnerable or attractive systems designed to lure attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of compromise.
• DNS sinkholes: Redirect requests for known malicious domains to a controlled internal system instead of allowing the connection. This can identify infected hosts attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it protects data but does not primarily detect attackers.
• CI/CD: Automates software development and deployment processes.
• Threat modeling: Identifies potential threats and weaknesses before or during system design.
• Data obfuscation: Makes data harder to understand, but it is not an attacker-detection method.

• Low usage during the first three weeks
• Very high usage during the last week

• High availability: Keeps services running despite failures.
• High latency: Means slow response times; it is not a benefit.
• Load balancing: Distributes traffic across resources but does not specifically address scaling resources up and down.

yaml 
clusterIP: None

• CronJob: Runs Jobs on a schedule and normally does not need stable networking.
• Deployment: Manages interchangeable, stateless replicas and usually uses a regular Service.
• DaemonSet: Runs a Pod on selected nodes but does not inherently require stable Pod identities.

• Updating the CRL: Revokes compromised certificates, but does not fix the CA flaw that allowed them to be created.
• Changing passwords: May be necessary if accounts were compromised, but it does not address the certificate-generation vulnerability.
• Implementing SOAR: Improves security automation and response; it does not remediate the underlying PKI weakness.

• User preferences change, so the model must learn from recent data.
• Keeping the existing data helps preserve knowledge of older patterns and provides a broader training distribution.
• Training only on new data can cause catastrophic forgetting and may overfit if the new dataset is small.
• The new data should not automatically be used as the test set, because it is needed for training and the model must still be evaluated on separate, representative data.

• The servers run different operating systems: Windows, Linux, and Unix.
• Containers generally share the host operating system’s kernel, so they cannot normally run workloads requiring unrelated kernels, such as Windows and Linux, on the same Linux host.
• A hypervisor can create separate virtual machines, allowing each VM to run its own guest OS.
• A Type 2 hypervisor runs on top of a host operating system and can support multiple guest operating systems.

• Restarting the device: may fix software problems, but not a directional connection issue.
• Swollen battery: is a safety concern, but would not typically cause recognition only in one orientation.
• Failing cable: possible in general, but less likely because it works on other similar devices.
• Dirty or damaged port: best matches the symptoms. Inspect and carefully clean the port, or have it serviced if damaged.

• Active-active routers: Provide redundant Internet connections/devices. Both can operate, so traffic can fail over or be load-balanced.
• Active-active firewalls: Avoid a single firewall becoming a failure point while maintaining security inspection.
• Load balancers: Distribute requests across multiple web servers. If one server fails, traffic can go to the other.
• Redundant power supplies: A server with separate power supplies should connect to independent power sources or circuits.
• UPS A and UPS B: Provide backup power and redundancy. Ideally, each power supply is connected to a different UPS.
• SONET ring: A ring topology provides alternate paths if a fiber link or segment fails.

• Two-part tariff pricing: $10 per unit
• Dual pricing: $20 per unit

Two-part tariff pricing

Dual pricing

• Division X, the seller, is credited with the market price: \(\$20\)
• Division Y, the buyer, is charged the marginal cost: \(\$10\)

• IRR assumes that interim cash flows can be reinvested at the project’s own IRR. This may be unrealistic, especially when the IRR is very high.
• MIRR assumes reinvestment at a specified rate, usually the company’s cost of capital or another realistic reinvestment rate.

• B: MIRR does not specifically favour projects with long payback periods.
• C: MIRR and IRR can rank competing projects differently.
• D: MIRR is not always higher than IRR; it may be higher or lower depending on the cash flows and reinvestment rate.

• 2000::/3 — Global unicast, used for publicly routable IPv6 addresses.
• FC00::/7 — Unique local, used for private internal addressing.
• FE80::/10 — Link-local, used only on the local network segment and not routed between subnets.

1. Get Data > Folder

1. Expand the Attributes column

1. Remove the Content column

• Folder connector: lists files and their metadata, but also includes a Content binary column.
• Combine Files: processes and combines the actual CSV contents, which is explicitly disallowed here.

• A — Custom Button: A button can launch a flow, typically by passing the flow’s URL and record context.
• D — From a Process: A Process can invoke a flow using an Apex action configured for flow invocation. However, this is automation-triggered, not directly accessed by a user.
• B — Quick Action: In current Salesforce functionality, a Flow Quick Action can launch a screen flow directly from a record page. This makes B a valid modern method.
• C — Visual Workflow Launcher: This is not generally listed as a standard access method in current Salesforce terminology; Salesforce commonly uses the Flow component on Lightning pages instead.

• Employees can use approved devices from remote locations or worldwide offices.
• Users do not need to carry or insert extra hardware.
• It helps prevent account takeovers from unknown devices.

• Geotagging: Restricts access based on location, which could interfere with remote work and travel.
• Smart cards: Require additional physical equipment and card readers.
• Time-based logins: Limit access according to time but do not strongly bind access to an authorized user device.

• If the hashes match, the software has likely not changed.
• If they differ, the software was modified or corrupted.

• Encryption: Protects confidentiality by making data unreadable; it does not primarily verify that software was unchanged.
• Baselines: Establish expected configurations or states, but hashing is the specific method for checking file integrity.
• Tokenization: Replaces sensitive data with non-sensitive tokens and is unrelated to software integrity.

• Import: Copies data into the Power BI model. It requires scheduled or manual refresh, so it may not meet the two-minute requirement.
• Live connection: Connects to an existing Power BI semantic model or Analysis Services model; it is not the appropriate choice for connecting directly to the Azure SQL database in this scenario.

• AWS AppSync is designed for serverless applications that need to retrieve and combine data from multiple sources.
• A pipeline resolver can invoke multiple functions or data-source resolvers, including resolvers connected to different DynamoDB tables.
• The application can receive the combined result through one GraphQL request, without requiring custom aggregation logic in the application.
• This is operationally efficient because AppSync manages the API layer and resolver execution.

• Athena Federated Query is intended primarily for analytics and ad hoc querying, not low-latency application data retrieval.
• Querying DynamoDB through Athena can consume DynamoDB read capacity and may affect table performance.
• It also introduces analytical-query overhead and is not the normal choice for a microservice web application.

• Crowd-sourced evaluation: Requires recruiting and managing many evaluators.
• Human-worker evaluation: Provides human judgment but requires coordination, labeling instructions, and quality control.
• RLHF: Is a training and alignment process, not simply a low-overhead model comparison method.
• Automatic model evaluation: Quickly evaluates outputs using predefined toxicity or quality metrics with minimal manual effort.

• Create a CodeCommit repository in the secondary Region.
• Use CodeBuild to run a Git mirror operation from the primary repository to the secondary repository.
• Use EventBridge to detect relevant repository events, such as a pull request being merged.
• Invoke a Lambda function, which starts the CodeBuild project.

• B: Amazon S3 is object storage, not a Git repository that developers can use as a CodeCommit remote.
• C: CodeArtifact is intended for packages and artifacts, not source-code repository mirroring.
• D: An AWS Cloud9 environment is not an appropriate automated replication mechanism and would require manual or persistent infrastructure management.

• Sets a high initial price for a new product.
• Targets customers willing to pay more, often called early adopters.
• Gradually reduces the price to attract more price-sensitive customers as the product becomes less novel and competition increases.

• Penetration pricing: starts with a low price to gain market share quickly.
• Premium pricing: maintains a high price to communicate superior quality or status; it does not necessarily involve later price reductions.
• Loss leader pricing: sells one product at a very low price, sometimes below cost, to attract customers who may buy other products.

• The servers are powered on.
• The network is functioning.
• Devices can still reach the server network.

• ARP poisoning: Redirects or intercepts local network traffic; it usually affects communication paths rather than overwhelming a service.
• Jamming: Disrupts wireless or radio signals. It would not fit a system that remains accessible from devices on the server network.
• Kerberoasting: Attempts to crack service-account credentials from Kerberos tickets; it does not normally cause an immediate outage.

• Custom domain: miami.weyland.com requires a paid App Service tier; Free and Shared are unsuitable.
• Two instances: Standard supports scaling to multiple instances.
• SSL: Standard includes SSL support.
• 12 GB storage: Basic provides only about 10 GB, so it does not meet the requirement. Standard provides substantially more storage.
• Cost minimization: Standard is the lowest tier among the choices that satisfies all requirements.

• A: Describes a broad purpose and direction, but is not the specific CIMA definition.
• C: “Scoping out” activities is too vague and incomplete.
• D: Combines long-term goals, strategies and policies, but describes a wider strategic-planning statement rather than the definition of strategy itself.

• Share of overall contribution: part of the organization’s total contribution is allocated to the supplying division.
• Dual pricing: the supplying division may record a higher transfer price while the receiving division records a lower price, with central accounts absorbing the difference.
• A centrally imposed price range: this may allow the transfer price to be set above variable cost, helping the supplying division recover fixed costs.

• 25 — Traditional SMTP server-to-server delivery; often restricted for client submission and not inherently encrypted.
• 110 — POP3 for retrieving email; unencrypted by default.
• 143 — IMAP for retrieving and synchronizing email; unencrypted by default.
• 587 — Authenticated SMTP submission, commonly secured with STARTTLS.

• Conserve public IPv4 addresses: IPv4 addresses are limited, so many internal devices share a smaller number of public addresses through NAT.
• Reduce direct exposure: Private addresses are not directly routable from the public Internet, which helps reduce unsolicited access to internal devices.

• Packet capture: Collects and analyzes network traffic; it does not describe the scan type.
• Privilege escalation: Attempts to gain higher permissions after obtaining access.
• System enumeration: Identifies systems, services, or resources, but is not specifically defined by the lack of credentials.
• Passive scan: Observes traffic without actively probing systems. A vulnerability scan is generally an active assessment.

• Access controls — ensuring only authorized users can access it.
• Encryption — protecting the data if it is intercepted or exposed.

• Code signing: Verifies the software’s authenticity and integrity; it does not hide the source code or prevent reverse engineering.
• Tokenization: Replaces sensitive data with tokens, mainly for protecting data such as payment information—not software logic.
• Blockchain: Provides a tamper-resistant record of transactions or data; it does not protect compiled code from analysis.

• Digitally signing the software: Verifies authenticity and integrity. It does not hide how the software works.
• Limiting third-party libraries: May reduce dependencies and attack surface, but does not directly prevent reverse engineering.
• Using compile flags: Some compiler options can remove debugging information or optimize code, which may provide limited protection, but this is not the primary technique identified for preventing reverse engineering.

• Managerial: policies, standards, risk management, governance
• Operational: procedures carried out by people, such as training, incident response, and backups
• Technical: firewalls, encryption, access-control systems
• Physical: locks, guards, cameras

• D — Value analysis: Correct. It examines an existing product to identify ways of reducing its cost while still providing the required functions, quality and reliability.
• E — Kaizen costing: Correct. It involves making continuous, small improvements and cost reductions while the product is already in production.

• Functional analysis: It is not limited to minimizing the cost of the originally defined functions. It examines what functions are required and how they can be provided at the lowest overall cost.
• Value engineering: Usually applies to the design and development of a new product, rather than being a fundamental redesign of existing organisational processes. That description is closer to business process re-engineering.
• Target costing: The target cost is generally established during the product development stage, before production begins. It is not continuously reset while the product is in production.

• ADF: Automatic Document Feeder; a printer/scanner hardware component.
• USB: A short-range wired connection, not a protocol for accessing a remote shared folder.
• PCL: Printer Control Language; it describes how print jobs are formatted, not how files or printers are shared over a network.

• A: Configure security groups — Customers define inbound and outbound rules for resources such as Amazon EC2 instances.
• B: Classify company assets — Customers decide how their data and assets should be classified and protected.

• C: Amazon S3 is a regional service; customers select a Region, not individual Availability Zones for buckets.
• D: AWS manages the infrastructure and patching for Amazon DynamoDB.
• E: AWS manages the infrastructure used by AWS Lambda; customers do not select EC2 instances for Lambda functions.

• Database data: Aggregates are used to retrieve structured data, commonly from entities and database sources.
• Screen scope: A Screen Aggregate belongs to the screen where it is defined and is not directly reusable as a screen-level aggregate elsewhere.
• Asynchronous and parallel execution: Multiple Screen Aggregates can run asynchronously and in parallel, helping the screen load data efficiently.

• Continuous deployment: Automates software releases; it does not specifically test input handling.
• Static code analysis: Examines source or compiled code without executing it. It can find coding flaws but does not directly stress the application with malformed inputs.
• Manual peer review: Developers inspect code or design manually. Useful, but not the best practice specifically for testing how a live product handles invalid input.

• Discovers sensitive data in Amazon S3 buckets
• Uses machine learning and pattern matching to identify data such as personally identifiable information (PII)
• Helps assess S3 security and privacy risks
• Generates findings for potentially sensitive or exposed data

• Amazon Detective: Investigates security findings and performs root-cause analysis.
• Amazon GuardDuty: Detects threats and suspicious activity across AWS accounts and workloads.
• AWS IAM Access Analyzer: Identifies resources that are accessible from outside their intended trust zone, such as publicly accessible S3 buckets.

• Un AG puede tener réplicas en Windows y Linux desde SQL Server 2017; por tanto, una réplica Windows y otra Linux es posible.
• Sin embargo, las réplicas de un AG deben utilizar normalmente la misma versión principal de SQL Server. Una instancia SQL Server 2017 no puede tener directamente una réplica secundaria SQL Server 2019 como configuración normal y permanente.
• En tu escenario, SQL Server 2017 en Windows y SQL Server 2019 en Linux no se pueden añadir directamente como réplicas equivalentes de AG1. Primero habría que realizar un proceso de actualización/migración compatible, por ejemplo mediante una actualización gradual o una tecnología de migración como log shipping o distributed availability groups, según el diseño.

• Tipo de clúster y mecanismo de quorum.
• Failover normalmente manual en configuraciones multiplataforma.
• Edición y características compatibles.
• Configuración de endpoints y permisos.
• Limitaciones específicas de SQL Server en Linux.

1. Find the subnet-mask increment in the octet where the prefix ends.
2. Identify the network address by finding the subnet boundary at or below the given IP.
3. The first usable address is network address + 1.
4. The broadcast address is one address before the next subnet.
5. The last usable address is broadcast - 1.

• 172.28.228.144/18

• 172.28.228.144/23

• Business
• People
• Governance
• Platform
• Security
• Operations

• Cloud financial management
• Portfolio management
• Data governance
• Risk management
• Compliance

• Create and manage approved IT services as products
• Control which users can deploy those products
• Apply governance, permissions, and constraints
• Use and manage infrastructure-as-code templates, such as AWS CloudFormation templates

• AWS Resource Explorer: Helps find and browse AWS resources; it does not govern IaC deployments.
• AWS Organizations: Manages accounts, consolidated billing, and organization-wide policies.
• AWS Systems Manager: Provides operational management, such as patching, automation, and parameter storage, but it is not primarily used to catalog and govern IaC-based service deployments.

• Tactics: The attacker’s overall goal, such as gaining persistence or exfiltrating data
• Techniques: The methods used to achieve that goal
• Procedures: The specific implementation or sequence of actions

• IP addresses and hash values: Useful indicators, but they can change quickly.
• Indicators of compromise: TTPs may help identify IOCs, but their main value is describing behavior.
• Tools: Attackers can replace tools or use legitimate administrative utilities.

• Aggregation happens once, during the scheduled job.
• Dashboard users query a relatively small, precomputed table.
• Repeated users do not trigger expensive aggregations against the detailed sales table.
• Overwriting is appropriate because the summary is rebuilt for the reporting period.

• B: Structured Streaming is unnecessary for data that only needs daily refreshes and adds operational/compute overhead.
• C: A view recomputes the aggregation at query time, increasing latency and query cost.
• D: Delta caching may improve reads but does not replace the need to materialize the expensive aggregation, and cache availability is not the main design guarantee.

• Existing measures
• Relationships
• Calculated columns
• Tables and fields
• Existing transformations in the model

• SharePoint folder: Reconnects to the source files. You would likely need to recreate the model and measures.
• Power BI dataflows: Primarily provide reusable data preparation and storage, but they do not automatically provide the existing semantic model and measures.
• Excel workbook: Connects directly to the source file and would also require rebuilding the model and measures.

• Accept: Acknowledging the risk without taking additional action.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or employee training.
• Avoid: Eliminating the activity or condition that creates the risk.
• Transfer: Shifting the consequences—usually financial—to another party, such as an insurer.

sql 
SELECT COUNT(*) FROM table;

• A: It does not normally need to scan all data files for this operation.
• B: Results are not simply reused from a query cache every time. Caching is separate from Delta’s metadata optimization.
• D: The relevant metadata is maintained through the Delta transaction log, not directly treated as a Parquet-file metadata operation in this context.

• Future costs — Only costs occurring in the future can be affected by the investment decision. Past costs are sunk and irrelevant.
• Incremental costs — These are additional costs caused by choosing the investment. They are relevant because they differ between alternatives.
• Cash flows — Capital investment decisions are based on future cash inflows and outflows, usually discounted to present value.

• Committed costs have already been agreed or incurred and generally cannot be changed by the decision.
• Unavoidable costs will arise regardless of which option is selected, so they do not affect the choice.

• Security controls
• Processes and procedures
• Compliance evidence
• Performance against contractual requirements

• Service-level agreement (SLA): Defines expected service performance, such as uptime and response times.
• Memorandum of agreement (MOA): Documents a general agreement between parties, but does not necessarily provide audit rights.
• Supply chain analysis: Identifies risks across suppliers and dependencies, but is not a contractual mechanism for reviewing vendor controls.