Huawei H35-210_V2.5 Exam Prep
HCIA-Access V2.5 (Page 21 )

• Accept: Acknowledge the risk and choose not to take additional action.
• Transfer: Shift the risk or its financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reduce the likelihood or impact of the risk, such as by implementing security controls.
• Avoid: Eliminate the activity or condition that creates the risk.

• Documented and evaluated
• Assessed for security, cost, and operational impact
• Reviewed and approved by the appropriate personnel
• Tested before implementation
• Tracked with version history and rollback procedures

• Risk management process: May help assess the issues, but it does not authorize and manage design changes.
• Product design process: Applies primarily while creating a new design.
• Design review process: Normally evaluates a design before release; this design is already released.

• Vulnerability scanner: Finds technical weaknesses in systems, applications, or devices. It does not usually analyze the entire supply chain.
• Penetration test: Simulates attacks against a defined target to identify exploitable weaknesses. Its scope is narrower.
• SCAP (Security Content Automation Protocol): Provides standardized formats and methods for automating security configuration and vulnerability checks, rather than mapping the full supply chain.

• A — Too infrequent: Formal strategies are often reviewed only every three to five years. This can make the organisation slow to respond to rapid changes in technology, competitors, regulation or customer needs.

• C — Relies on predicting the future: The approach assumes senior managers can make reasonably reliable forecasts and assumptions. In uncertain environments, these assumptions may quickly become invalid.

• E — Can restrict radical innovation: Formal planning tends to favour existing information, established objectives and incremental improvements. This may discourage experimental or highly innovative strategies that emerge from lower levels of the organisation.

• B concerns the difficulty of achieving competitive advantage through core competences when competing with focused specialists. It is not specifically a drawback of the formal top-down planning process.
• D is an activity organisations should undertake—continuous monitoring—not a drawback of the approach itself.

• Security controls
• Processes and procedures
• Compliance evidence
• Performance against contractual requirements

• Service-level agreement (SLA): Defines expected service performance, such as uptime and response times.
• Memorandum of agreement (MOA): Documents a general agreement between parties, but does not necessarily provide audit rights.
• Supply chain analysis: Identifies risks across suppliers and dependencies, but is not a contractual mechanism for reviewing vendor controls.

kusto 
Event 
| summarize make_set(EventID) by Computer

• summarize groups records.
• by Computer creates one result row per virtual machine.
• make_set(EventID) returns an array containing unique event IDs for that computer.

kusto 
| summarize make_list(EventID) by Computer

• Due Date
• Order Date
• Delivery Date

DAX 
Order Date = 'Due Date' 
Delivery Date = 'Due Date'

• Due Date[Date] ? Sales[Due Date]
• Order Date[Date] ? Sales[Order Date]
• Delivery Date[Date] ? Sales[Delivery Date]

• The selling division receives a credit based on a favourable transfer price, often market price or full cost plus a profit margin.
• The receiving division is charged a lower amount, such as marginal cost or another agreed price.
• The difference is accounted for centrally by head office or a corporate adjustment.

• Career enhancement — A mentor can provide guidance, advice, networking support and help the mentee identify career opportunities.
• Support with new challenges — A mentor can help the mentee think through unfamiliar situations and develop confidence and practical solutions.
• Personal development — Mentoring can improve skills such as communication, leadership, decision-making and self-awareness.

• Solving all problems — The mentor supports and guides the mentee but should not take responsibility for solving every problem.
• Discipline would be dispensed if they make a mistake — Mentoring does not remove normal accountability or workplace consequences. Mistakes should instead become learning opportunities.

• A: Daily involvement is unnecessary and may not solve the availability problem.
• C: Clarifying all requirements at the start conflicts with agile’s iterative refinement.
• D: Simply reviewing based on availability leaves the problem unresolved and allows rework to continue.

sql 
CREATE PROCEDURE dbo.usp_CreateOrder 
AS 
BEGIN 
    SET NOCOUNT ON; 
    SET XACT_ABORT ON; 


    BEGIN TRY 
        BEGIN TRANSACTION; 


        INSERT INTO dbo.Orders (/ columns /) 
        VALUES (/ values /); 


        SET @OrderID = SCOPE_IDENTITY(); 


        COMMIT TRANSACTION; 
    END TRY 
    BEGIN CATCH 
        IF @@TRANCOUNT > 0 
            ROLLBACK TRANSACTION; 


        THROW; 
    END CATCH; 
END;

• BEGIN TRY contains the transactional work.
• SCOPE_IDENTITY() retrieves the identity generated by the INSERT; it belongs after the insert, not as the error-handling logic.
• COMMIT runs only if all statements succeed.
• BEGIN CATCH handles failures.
• IF @@TRANCOUNT > 0 prevents attempting a rollback when no transaction is active.
• ROLLBACK undoes partial changes.
• THROW re-raises the original error with consistent details for the application.
• SET XACT_ABORT ON ensures many run-time errors automatically terminate and roll back the transaction.

• Input feature distributions differ from training data ? Analyze dataset drift metrics

• Model accuracy drops without code changes ? Analyze dataset drift metrics

• Endpoint latency increases under load ? Investigate scaling and infrastructure metrics

• Managerial: policies, standards, risk management, governance
• Operational: procedures carried out by people, such as training, incident response, and backups
• Technical: firewalls, encryption, access-control systems
• Physical: locks, guards, cameras

• Code signing: Verifies the software’s authenticity and integrity; it does not hide the source code or prevent reverse engineering.
• Tokenization: Replaces sensitive data with tokens, mainly for protecting data such as payment information—not software logic.
• Blockchain: Provides a tamper-resistant record of transactions or data; it does not protect compiled code from analysis.

1. Get Data > Folder

1. Expand the Attributes column

1. Remove the Content column

• Folder connector: lists files and their metadata, but also includes a Content binary column.
• Combine Files: processes and combines the actual CSV contents, which is explicitly disallowed here.

• A — Securing information assets: This is the responsibility of management and operational/security teams.
• B — Validating protection: Correct. The auditor checks whether controls—such as access restrictions, encryption, retention, and handling procedures—match the asset’s classification.
• C — Ensuring alignment with regulations: Management and legal/compliance functions typically establish classification requirements; the auditor may assess compliance but does not primarily define alignment.
• D — Defining classification levels: This is a management responsibility based on business needs, risk, and regulatory obligations.

• Password spraying: Tries a few common passwords against many accounts; no indication of repeated login attempts.
• Remote-access Trojan (RAT): Could install malware, but it does not explain how the attacker obtained the administrator’s credentials.
• Dictionary attack: Tries words or common passwords against an account; again, the scenario specifically highlights Telnet’s lack of encryption.

• Restarting the device: may fix software problems, but not a directional connection issue.
• Swollen battery: is a safety concern, but would not typically cause recognition only in one orientation.
• Failing cable: possible in general, but less likely because it works on other similar devices.
• Dirty or damaged port: best matches the symptoms. Inspect and carefully clean the port, or have it serviced if damaged.

• The requirement explicitly says the organization wants to use SAML to secure Salesforce API access.
• The SAML Bearer Assertion Flow exchanges a SAML assertion for a Salesforce OAuth access token.
• It is intended for server-to-server or other noninteractive integrations where the application has already been authenticated by an identity provider.
• The connected app can be configured so administrators authorize or preauthorize applications that consume the APIs.

• B — JWT Bearer Flow: Uses a signed JWT, not a SAML assertion. It would be appropriate if the requirement specified JWT-based authentication.
• C — SAML Assertion Flow: This is not the standard Salesforce OAuth flow name; the relevant name is OAuth 2.0 SAML Bearer Assertion Flow.
• D — User-Agent Flow: Designed for interactive browser-based authorization, not a SAML-based server-to-server integration.

Statement 1 — Correct

Statement 2 — Correct

• 16 VMs: one failure loses 25 GB and 10 cores—only 6.25% of memory.
• 8 VMs: one failure loses 12.5% of memory.
• 4 VMs: one failure loses 25%.
• 1 VM: one failure loses the entire application environment.

• Aggregation happens once, during the scheduled job.
• Dashboard users query a relatively small, precomputed table.
• Repeated users do not trigger expensive aggregations against the detailed sales table.
• Overwriting is appropriate because the summary is rebuilt for the reporting period.

• B: Structured Streaming is unnecessary for data that only needs daily refreshes and adds operational/compute overhead.
• C: A view recomputes the aggregation at query time, increasing latency and query cost.
• D: Delta caching may improve reads but does not replace the need to materialize the expensive aggregation, and cache availability is not the main design guarantee.

• C: Develop the rule in the Rules Editor, define the events, match, and condition sections, then use the test rule feature. This directly validates the YARA-L rule without enabling it in production.
• A: UDM Search can help investigate data and refine filters, but it does not fully test YARA-L logic—especially complex event joins, match windows, and conditions.

• DB1 (500 TB): Azure Data Box Heavy

• Virtual machines: Azure Migrate

• A. IDS attack signatures: Primarily detects suspicious network activity, not necessarily malware embedded in uploaded files.
• C. Load balancer: Improves availability and distributes traffic; it does not inspect documents for malware.
• D. WAF: Protects web applications from attacks such as SQL injection and command injection, but its primary role is not scanning uploaded PDFs for malware.

• A valid input returns the expected result
• An invalid input raises an error
• Boundary values are handled correctly

• B: Copilot may help generate tests, but it does not automatically write all necessary tests.
• C: Writing the implementation does not verify that it works correctly.
• D: Copilot can suggest test commands or test code, but the developer or development environment must execute and validate the tests.

• Cloud architecture
• Data architecture
• Platform engineering
• Data engineering
• Provisioning and modernization

• Data protection is associated mainly with security and risk management.
• Data governance belongs to the governance perspective.
• Data science is not an AWS CAF capability.

• A script of cloud CLI commands: IaC because the commands can be saved, reviewed, versioned, and rerun consistently.
• Manually run curl commands: Not necessarily IaC; they are manual actions unless organized into an automated script.
• A sequence of REST requests passed to an API: Could represent automation, but the wording does not explicitly say they are stored and executed as reusable code.
• Commands entered into a cloud console: Manual operation, not IaC.

• The product is already in production.
• The organization is examining the product’s functions and cost drivers.
• The objective is to reduce cost without reducing perceived value or required quality.

• Kaizen costing focuses on continuous, usually incremental, cost reductions during the manufacturing stage. It is not specifically the systematic examination of a product’s functions.
• Standard costing compares actual costs with predetermined standards; it is a control technique, not a product redesign method.
• Process innovation concerns developing significantly improved production processes, rather than analysing the product’s functions and value.

• Employees can use approved devices from remote locations or worldwide offices.
• Users do not need to carry or insert extra hardware.
• It helps prevent account takeovers from unknown devices.

• Geotagging: Restricts access based on location, which could interfere with remote work and travel.
• Smart cards: Require additional physical equipment and card readers.
• Time-based logins: Limit access according to time but do not strongly bind access to an authorized user device.

• BCP (Business Continuity Plan): è più ampio e mira a mantenere le funzioni essenziali dell’organizzazione durante un’interruzione. Il DRP è una componente più specifica del BCP.
• Communication plan: stabilisce come comunicare con dipendenti, cittadini e altre parti interessate, ma non ripristina i sistemi.
• IRP (Incident Response Plan): gestisce la risposta iniziale a un incidente di sicurezza, come un attacco informatico, non principalmente il recupero da un disastro fisico.

• SAML: Enables federated authentication and single sign-on between the IdP and SaaS providers.
• OAuth tokens: Allow delegated application access; OAuth is not primarily the first step for employee SSO.
• Password vaulting: Stores or autofills multiple passwords but does not eliminate the separate credentials or provide true federation.

• Customer contains one row per customer and the customer’s Address ID.
• Address contains one row per address and the corresponding location details.

1. Select the Customer query.
2. Choose Merge Queries.
3. Match Customer[Address ID] with Address[Address ID].
4. Use a Left outer join so every customer is retained.
5. Expand the merged Address column and select City, State/Region, and Country.

• Append adds rows vertically and is used for tables with the same structure.
• Group By summarizes rows rather than adding related columns.
• Transpose switches rows and columns and does not establish a relationship.

• Compare each server’s drive specifications and performance data.
• Identify the drive that is faulty, slow, or mismatched.
• Replace it with a drive that matches the required interface, capacity, and performance characteristics.
• Avoid selecting a slower drive, because storage performance can bottleneck the entire server.
• In a redundant array, use a compatible replacement so rebuilding does not create unnecessary performance degradation.

• If the hashes match, the software has likely not changed.
• If they differ, the software was modified or corrupted.

• Encryption: Protects confidentiality by making data unreadable; it does not primarily verify that software was unchanged.
• Baselines: Establish expected configurations or states, but hashing is the specific method for checking file integrity.
• Tokenization: Replaces sensitive data with non-sensitive tokens and is unrelated to software integrity.

• Writing with Apache Spark, typically as Delta tables.
• Reading with Apache Spark for processing and analysis.
• Reading with T-SQL through the lakehouse’s automatically generated SQL analytics endpoint.
• Reading with KQL through Fabric’s query capabilities that can access lakehouse data.

• Eventhouse: Optimized for real-time and KQL workloads, but it is not the natural destination for Spark-based writes or general lakehouse storage.
• Datamart: Intended mainly for relational analytics and Power BI; it is not designed for Spark-based data ingestion.
• Warehouse: Primarily T-SQL-based and structured. It does not provide the same native Spark write experience or flexibility for semi-structured data.

• SQL injection
• Cross-site scripting (XSS)
• Malicious or malformed web requests
• Some application-layer abuse

• Layer 4 firewall: Filters based mainly on IP addresses, ports, and connections; it lacks detailed web-request inspection.
• NGFW: Provides broader network security, but a WAF is more specialized for protecting web applications.
• UTM: Combines multiple security functions, but it is not necessarily optimized for web-application protection.

• Separate accounts/domains create a strong administrative boundary between non-production and production.
• Separate projects provide distinct IAM boundaries, billing, quotas, service accounts, and resources.
• Developers can receive permissions in the development project without automatically gaining access to production.
• Production administrators can be restricted from development resources, supporting separation of duties and least privilege.

• A: Creates excessive project fragmentation without being required by the stated requirement.
• C: Keeps development and production under one account and does not clearly separate administrative duties.
• D: Uses one account and only two projects; it provides some project isolation but weaker organizational separation.

• Issuer: Identifies the party issuing a SAML message—usually the identity provider in the assertion. It is not the Salesforce-specific identifier the architect should provide for differentiating Salesforce.
• Identity Provider Login URL: The endpoint where users are sent to authenticate.
• SAML identity location: Determines where the user identity is found in the SAML assertion, such as the subject or an attribute.

• Laws and regulations
• Litigation holds
• Industry or contractual obligations
• Tax, financial, health, or privacy requirements

• Business strategy and direction: May influence retention, but cannot override legal requirements.
• Storage capacity and longevity: Practical considerations, not the primary driver.
• Business ease and value analysis: May support decisions after compliance obligations are identified.

• Accept: Acknowledge the risk and take no additional action.
• Transfer: Shift the risk or financial impact to another party, such as through insurance or a contract.
• Mitigate: Reduce the likelihood or impact using controls, such as firewalls, training, or backups.
• Avoid: Eliminate the activity that creates the risk.

• Drops packets when traffic exceeds a certain bitrate: This describes traffic policing, not shaping.
• Fragments large packets and queues them: Shaping does not fragment packets as its primary congestion-control action.
• Drops packets randomly from lower-priority queues: Packet dropping may occur if a shaping queue becomes full, but it is not the defining behavior.

• Shaping: buffers and delays excess traffic.
• Policing: drops or marks traffic that exceeds the configured rate.

• principal represents the source or initiating system.
• principal.port is the source port.
• target represents the destination system.
• target.port is the destination port.

text 
principal.port = 5555

• network.ApplicationProtocol = HTTP identifies HTTP traffic but not the backdoor specifically.
• target.port = 5555 finds traffic going to port 5555, rather than originating from it.
• network.ip_protocol = TCP is too broad because many services use TCP.

• Resources that do not need internet access should remain on private network segments.
• Internet-facing access should be restricted to systems that require it.
• Access should be explicitly allowed rather than broadly exposed.

• A: A single administrator with access to core functions may violate least privilege if that access is broader than necessary.
• B: Inspecting traffic supports monitoring and defense, but does not itself limit privileges.
• C: Updating routing configurations supports availability and connectivity, not least privilege.

• The identified risk
• Its likelihood and potential impact
• The person or team responsible for handling it
• The response or treatment plan
• Risk thresholds, such as when escalation or action is required
• Current status and review dates

• Risk tolerance: The amount of risk an organization is willing to accept; it is a concept or limit, not usually the primary documentation.
• Risk transfer: Moving the responsibility or financial impact of a risk to another party, such as through insurance.
• Risk analysis: The process of evaluating risk likelihood and impact.

• Each team’s Bedrock workflow uses a separate IAM service role.
• The role’s Amazon S3 permissions can be limited to only that team’s customer folder or objects.
• This enforces least privilege and prevents one team’s Bedrock application from accessing another team’s data.
• Access is enforced by AWS permissions, not by asking users to provide a customer name in each request.

• A single role with broad S3 access does not provide team-level isolation.
• Asking teams to specify a customer name is not an access-control mechanism.
• Redacting data does not prevent unauthorized access.
• A bucket policy alone is insufficient unless it explicitly enforces the required team-role restrictions.

• Plenum: Describes a fire-resistant cable jacket rating, not a transmission medium or speed.
• Ethernet: Describes a networking technology; Ethernet can use copper or fiber, so the term alone does not identify the fastest cable type.
• DAC (Direct Attach Copper): Uses copper and is typically intended for short-distance, high-speed connections in data centers.

• CCTV system — Detective control: Cameras monitor and record activity, helping identify or investigate security incidents after—or while—they occur.
• Signs about being filmed — Deterrent control: The signs discourage people from attempting unauthorized or criminal activity because they know surveillance is present.

• Preventive: Stops an incident from occurring, such as a lock or access-control system.
• Corrective: Restores systems after an incident.
• Directive: Instructs people to behave in a certain way, such as a security policy.
• Compensating: Provides an alternative control when the preferred control cannot be implemented.

• Fileless malware: Nothing in the command indicates malware executing only in memory.
• Living-off-the-land binaries: Mimikatz is a credential-access tool, not a normal system utility used for LOLBin abuse.
• Social engineering: The command shows technical credential abuse, not manipulation of an accountant.

• A — Can help keep costs down and improve quality: The provider may have specialist expertise, efficient systems and economies of scale.
• B — There is a known fee if agreed in advance: A fixed or agreed fee can make costs more predictable and support budgeting.
• C — Allows management to focus on core operations and issues: Senior managers spend less time supervising routine finance processes and more time on strategic matters.

• Increased control: Control may decrease because the activity is performed externally.
• Increased independence: The organisation becomes dependent on the supplier.
• Increased understanding of the outsourcing business: The internal organisation usually has greater business knowledge; the provider may initially lack it.
• Increased confidentiality: Sharing financial information externally may create confidentiality risks.
• Internal expertise improved: Outsourcing can reduce opportunities to develop internal finance skills.