Huawei H35-210_V2.5 Exam Actual Questions
HCIA-Access V2.5 (Page 13 )

• IPv6 address types:

• The block FF00::/12 is a subset of the multicast space, so it represents multicast addresses.
• Therefore, this block forwards packets to a multicast address (to multiple receivers) rather than to a single unicast address.
• The other prefixes are unicast and would deliver to a single interface.

• A. Flash the BIOS: Not the first move. A BIOS update can be risky when POST is failing. It’s better to first rule out simpler causes (like RAM seating). BIOS flashing is usually done if the CPU isn’t supported by the current BIOS, which you’d check after RAM seating.

• B. Check the CMOS battery: Possible but unlikely the immediate cause. CMOS battery issues would more likely cause BIOS settings to reset or clock problems. RAM seating is a more common, direct fix after a motherboard swap.

• D. Reinstall the old motherboard: Not a troubleshooting step for the new system. The goal is to get the new motherboard to POST, not revert to old hardware.

• C. Reseat the RAM: Correct because memory seating problems are the most common cause of POST failures after a motherboard swap. Re-seating ensures proper contact in the new board’s slots.

• View/inspect configuration: Possible.
• Modify the installed application or its S-Controls: Typically restricted in a test-drive org.

• The correct answer: C. Tokenization

• Why:

• Why the others are weaker:

• '15' is a string. With + and a string, JavaScript does string concatenation: '15' + 10 -> '1510'.
• The result '1510' is then used in a multiplication: '1510' 2. The operator triggers numeric conversion, so '1510' becomes the number 1510.
• 1510 * 2 = 3020.

• If the code were let x = (15 + 10) * 2, the result would be 50 since 15 + 10 is numeric addition.

• Correct answer: All four statements are true (A, B, C, and D). The given key (A,B) is likely incorrect.

• A) Customers can change the size of the Warehouse after creation — Yes. You can resize a virtual warehouse after it’s created using ALTER WAREHOUSE ... SET WAREHOUSE_SIZE.
• B) A Warehouse can be resized while running — Yes. Snowflake supports online resizing; you can change the size without stopping queries.
• C) A Warehouse can be configured to suspend after a period of inactivity — Yes. You can enable auto-suspend with a delay (AUTO_SUSPEND).
• D) A Warehouse can be configured to auto-resume when new queries are submitted — Yes. You can enable auto-resume (AUTO_RESUME) so a suspended warehouse automatically resumes on new queries.

• Example commands:

• Even if a warehouse is resizing or auto-suspending, queries will be queued and then executed once the warehouse has the appropriate capacity.

• Goal: Identify the host that originated the infection, then label each remaining host as infected or clean based on log evidence.

• Logs to review (across hosts and firewall):

• How to identify the origin:

• How to classify other hosts:

• Quick tip: use the Reset All option if you want to re-run the scenario and practice again.

• What wipe does: A factory reset that erases all data, apps, and settings and returns the device to the OOBE. It removes the device from management and resets identity.
• Why not for this scenario: The goal is to repurpose the same device to a new user with Autopilot. Autopilot Reset keeps the device’s Azure AD/Intune identity and re-provisions the device for the next user without a full wipe.
• What Autopilot Reset does: Removes user data and apps but preserves device identity and management connection, then reapplies the Autopilot provisioning for the next user.
• When you’d use wipe instead: If you’re selling or permanently discarding the device, or you truly want to scrub all traces and start fresh without re-enrolling.

• Strongest encryption algorithms: Choose the strongest available encryption and integrity options, typically AES with the largest key size and a secure integrity algorithm.
• Encrypt all traffic: Select tunnel mode rather than transport mode. Tunnel mode encrypts the entire original IP packet, which is appropriate for a site-to-site VPN between branch networks.
• Secret-password authentication: Configure a pre-shared key (PSK) on both VPN concentrators. The key must match at both ends.

• B — Increase provisioned concurrency for Lambda

• D — Refactor the Lambda functions

• E — Use Amazon RDS Proxy

• RPO (Recovery Point Objective) — maximum acceptable data loss, measured in time. It specifies how far back in time you can tolerate data loss. Example: RPO of 2 hours means backups must occur at least every 2 hours.

• ARO (Annualized Rate of Occurrence) — expected frequency of a threat occurring per year. It estimates how often a risk is likely to happen on average (used in risk calculations).

• MTTR (Mean Time To Recover) — average time to recover/restore service after an incident. It includes detection, repair, and restoration time, and helps gauge downtime and alignment with RTO.

• Options:

• Answer: The correct choice is A (800-61r3).

• NIST SP 800-61 Rev. 3 is the dedicated guide for incident handling/response and reflects the latest guidance on the incident response lifecycle (preparation, detection/analysis, containment, eradication, recovery, post-incident activity).
• 800-61r2 is an older revision of the same incident response guide.
• 800-53 covers security and privacy controls, not a specific incident response standard.
• 800-171 focuses on protecting CUI in non-federal systems and networks, not incident response guidance.

• Incidents & alerts — see how the phishing activity was detected, correlated, and investigated.
• Threat Explorer — search for the malicious messages, recipients, URLs, attachments, and campaign activity.
• Email and collaboration reports — assess how many users or messages were affected.
• Remediation details — verify whether messages were quarantined, removed, or otherwise contained.

• Microsoft 365 admin center — general tenant administration.
• Microsoft Entra admin center — identity and access management.
• Exchange admin center — mail-flow and Exchange configuration, rather than full phishing-incident investigation.

• Control plane: Managed by Databricks and contains the Databricks web application, workspace services, cluster management, and job orchestration.
• Data plane: Runs in your cloud account and contains compute resources such as:

• Worker node: Data plane compute.
• Driver node: Data plane compute.
• JDBC data source: Usually an external data system.
• Databricks Filesystem (DBFS): Provides storage access and is backed by cloud object storage rather than being entirely part of the control plane.

• Answer: D: Making business cases for improvement action

• Continual Improvement focuses on identifying and planning improvements and ensuring they’re funded and prioritized. Creating a business case for an improvement action is part of justifying and obtaining support/resources to implement improvements.
• A (Identifying the cause of incidents) aligns with Problem Management.
• B (Authorizing changes) aligns with Change Enablement.
• C (Logging/managing incidents that result in improvement opportunities) aligns with Incident Management, not Continual Improvement.

• To get min/max per column, you need column profiling. That’s provided by enabling the column profile.
• To actually see those min/max values, you should show the column profile in the details pane, and you also need the details pane itself enabled so you can view it.

• Enable column profile (B)
• Show column profile in details pane (C)
• Enable details pane (E)

• Show column value distribution (D) shows distribution shape but isn’t required to get min/max.
• Show column quality details (D) deals with data quality metrics, not min/max.

• The mapping and resolution of endpoint identities (EIDs) to their location (RLOCs) in an SD-Access fabric is handled by the control plane using the LISP protocol.
• Why not the others:

• VPC: A logically isolated virtual network in a cloud environment; it describes networking, not shared application access.
• NFV: Replaces dedicated network appliances with virtualized network functions.
• SaaS: A cloud service model in which users consume an application without managing its infrastructure. It could describe how the application is delivered, but the question emphasizes serving multiple user groups, which points to multitenancy.

• Windows 10 VMs
• Windows Server 2012 or later VMs
• Running VMs—they do not need to be shut down
• Debian 8.2+ VMs, assuming the specific version is supported
• Stopped or deallocated VMs

• Question 142: Security governance is MOST associated with which IT infrastructure component? Network / Application / Platform / Process
• Answer: D. Process

• Security governance is about how decisions are made, accountability, and oversight to ensure security objectives align with business goals. These are implemented through governance processes (policy development, risk management, assurance, monitoring, escalation, etc.).
• The other options (Network, Application, Platform) are concrete IT components; governance affects them, but it’s exercised primarily through the processes that govern how those components are managed and controlled.

• In governance-related questions, focus on the decision-making, accountability, and control processes rather than the underlying technology components.

• The connecting host keeps the private key securely.
• The destination host stores the corresponding public key in its authorized keys.
• Authentication can occur without a person entering credentials each time.
• SSH also provides encrypted communication and host authentication.

• Biometric: Requires a human user and is difficult to automate.
• Smart card: Often requires user interaction or card access.
• Hard-coded password: Unsafe because passwords stored in scripts or applications can be exposed, reused, or difficult to manage securely.

• Answer: Record Producer (option D)

• Why: In ServiceNow HR Service Delivery, to make an HR Service usable from the Employee Service Center (self-service portal), there must be a way for employees to submit the request. A Record Producer provides the employee-facing form that creates the underlying HR Case when submitted. Without a linked Record Producer, the HR Service wouldn’t offer a submit form in the Employee Center.

• What the other fields are generally for (not required for exposure):

• Quick check: Look at the HR Service definition and ensure a Record Producer is associated so employees can submit requests from the Employee Center.

• The problem: Guest users can’t create posts in the Monthly Reports channel.
• The recommended fix (answer B): Modify the Guest access settings in the Teams admin center.

• Guest access settings control what guests are allowed to do across Teams (for example, posting, chat, and channel participation). If guests are restricted from posting, enabling the appropriate guest permissions will let them post in channels like Monthly Reports.
• The other options don’t directly change guest permissions in the way that affects posting:

• Correct answer: only new data added to the eventhouse (option E).
• Why: When you enable OneLake availability for the eventhouse, OneLake starts syncing data going forward. It does not automatically backfill or copy over data that already exists in the eventhouse before the enablement.
• What that means in practice: Any data added to the eventhouse after you enable OneLake will appear in OneLake (and be visible from OneLake file explorer). Pre-existing data in the eventhouse stays there unless you perform a separate backfill/copy operation outside the standard OneLake enablement.
• How to verify: add a small new dataset to the eventhouse after enabling OneLake availability, then check OneLake to confirm the new dataset appears.

• The correct permission is Manage Sandboxes (the official Salesforce name; the option in the list is written as “Manage Sandbox,” which is effectively the same idea but the canonical name uses the plural).
• Why: Sandboxes are a lifecycle feature. Only users with the explicit Manage Sandboxes permission can perform create, delete, refresh, or activate actions.
• Why the other options aren’t correct:

• IPv6 address types you’ll typically see:

• Unique Local Addresses (ULAs)

• If an address begins with fdXX:… or fc00:…, place it under “Unique Local Address” (ULA).
• If it begins with 2000::/3, place it under “Global Unicast.”
• If it begins with fe80::, place it under “Link-local.”
• If it begins with ff00::, place it under “Multicast.”

• What it says: you can add a cost when you adjust inventory, and that cost is posted automatically to a specific GL account.
• Reality: yes, you can adjust both quantity and value via an inventory adjustment journal. The cost on the journal line affects the inventory value.

• The general ledger postings are not arbitrary. the actual accounts used are determined by your item posting group and the system’s posting definitions. In practice, the adjustment debits/credits the appropriate inventory-related accounts (e.g., Inventory asset and a related offset such as an adjustment or COGS account) based on configuration.
• So, the cost change does not go to a single “manual” GL account you pick per line unless your posting setup maps to that account.

• The concept is true (you can adjust cost and have GL impact), but the claim that it posts to a single, specific GL account is oversimplified—the accounts come from your posting configuration.

• The answer: Question 51: C — Request trigger.

• To invoke a Logic App from an external service (here, the Azure Application Insights availability test) you need a trigger that starts on an incoming HTTP request. In Logic Apps, this is the trigger that exposes an HTTP endpoint — typically shown as "When a HTTP request is received" and referred to as the Request trigger.
• The other options aren’t appropriate:

• Create a Logic App with the Request trigger to generate a URL.
• Configure Application Insights to post the degraded-availability payload to that URL.
• Add actions (e.g., send email, follow-up) in the Logic App to notify the customer services team.

• Why: After listing all resources, you need to assign who is responsible for each task. A RACI chart (Responsible, Accountable, Consulted, Informed) documents these roles for every activity.

• What RACI means:

• Why the others aren’t suitable here:

• Quick example: Task "Create user authentication module" — Responsible: Developer, Accountable: Tech Lead, Consulted: Security Architect, Informed: PM.

powershell 
Get-AzureVM -ServiceName <service-name> -Name <vm-name> | 
  Set-AzureStaticVNetIP -IPAddress <private-ip> | 
  Update-AzureVM

• New-AzureRMVMConfig configures VM settings but does not itself assign the static IP.
• Set-AzureSubnet is not the appropriate cmdlet for assigning a VM’s private IP.
• The Azure portal option mentioned in the question was not the intended method for this older deployment model.
• Changing settings in Windows Network and Sharing Center is incorrect because Azure assigns the IP through the VM’s virtual network interface; manually configuring it inside the guest can cause conflicts.

• Basic: Self-help only; no technical support or design assessment.
• Developer/Standard: Technical support, but generally not the full proactive architecture guidance required here.
• Professional Direct: Includes proactive guidance and architecture recommendations.
• Premier: Also supports this, but is not the minimum-cost option.

• ProductSearchModel.getProductSearchHits() — option C
• ProductSearchHit.getRepresentedProducts() — option B

• ProductMgr.queryAllSiteProducts() (A) queries every product in the site, which is heavy and not scalable for large catalogs.
• Category.getProducts() (D) retrieves all products in a category; this can be slow for large categories.
• Using the search model and hits (B and C) leverages the search index, supports paging, and avoids scanning the entire catalog, making it more scalable.

• Port 515: LPD/LPR line-printer service
• Port 631: IPP — Internet Printing Protocol
• Port 9100: JetDirect/RAW printing, commonly used by network printers

• Linux machine: Linux could run these services, but the three printer-specific ports strongly indicate a printer.
• Router: Routers may use Telnet and HTTP, but normally would not expose ports 515, 631, and 9100 together.
• Windows machine: Windows can share printers, but this particular service combination is more characteristic of a network printer’s embedded operating system.

• A. Custom and standard objects have standard fields. True. Both object types include standard fields (for example, CreatedDate, LastModifiedDate, Owner). Custom objects also have the Name field, which is a standard field on all objects.
• B. Standard objects are included with Salesforce. True. Standard objects (like Account, Contact, etc.) come with Salesforce out of the box.
• C. A new standard object can be created. False. You can create custom objects, but you cannot create new standard objects.
• D. Only standard objects support master-detail relationships. False. Master-detail relationships can be used with both standard and custom objects.

• The correct option is A: Data architecture.

• Why: In the AWS CAF, the Platform perspective covers the technical foundation and architecture that enable cloud workloads to run reliably and efficiently. This includes how data is modeled, stored, and accessed across the enterprise—the core of data architecture.

• Quick mapping for the other options:

• Goal: Guests should not use cameras, but company users can.
• Correct configuration: Guest access settings in the Org-wide settings.

• External access: Controls external-domain communication, not guest capabilities inside Teams.
• Teams settings in Org-wide settings: Too generic; doesn’t specifically target guest capabilities.
• Audio & Video in the default Meeting Policy: Would affect everyone assigned to that policy. To meet the requirement without impacting internal users, you’d need separate policies or guest-specific settings; the exam focuses on the guest-access policy.

• A) You can only apply a single template BOM to a service object.

• C) You can modify or delete lines in a BOM template regardless of whether the template has been associated to a service object, or not.

• B) You can apply many template BOMs to a service object — false; typically only one template per service object.
• D) You can modify/delete lines only if not associated — false; you can modify templates even after association (per C).

• Source: on-premises SQL Server Database1
• Destination: Fabric Warehouse Warehouse1
• Connectivity: on-premises data gateway

• Dataflow Gen1: Primarily for Power Query transformations and isn’t the best Fabric-native choice for this copy operation.
• KQL queryset: Queries data; it does not orchestrate copying from SQL Server.
• Notebook: Could perform custom code-based movement, but it is unnecessary and less direct than a pipeline.

python 
import azure.cognitiveservices.speech as speechsdk 


speech_config = speechsdk.SpeechConfig( 
    subscription="YOUR_KEY", 
    region="YOUR_REGION" 
)

Important Azure Speech SDK classes

• SpeechConfig

• AudioConfig

python 
  audio_config = speechsdk.audio.AudioConfig( 
      use_default_microphone=True 
  )

• SpeechRecognizer

python 
  recognizer = speechsdk.SpeechRecognizer( 
      speech_config=speech_config, 
      audio_config=audio_config 
  )

• SpeechSynthesizer

• AudioOutputConfig

 Bogotá, Colombia