QUESTION: 73

The ADSL user under the UA5000 originally used the activation template as 2M, and then changed the activation template to 4M. The speed throw was maintained at the original level, and there was no obvious improvement. What are the reasons for this problem?

There is congestion in the uplink port
ADSL port has poor external line quality
The depth of the interleaving depth of the active template is too deep
The above are possible

Answer(s): D

Reveal Solution Next Question

QUESTION: 74

PITP application when OLT+MDU networking, which of the following statements is incorrect?

When PITP is enabled only on the OLT, only the PON port information of the OLT can be taken.
When PITP is enabled only on the MDU, only the user port information of the MDU can be taken.
If PITP is enabled on both the OLT and the MDU, the PON information and the port information of the MDU are simultaneously marked.
If PITP is enabled on both the OLT and the MDU, you need to pass a switch on the OLT (pitp permit-forwarding service-port X). When the switch is enabled, the OLT PON port information is carried.

Answer(s): C

Reveal Solution Next Question

QUESTION: 75

(In the multiple) GPON network, which of the following reasons may cause the ONT to not be automatically discovered?

The optical power received by the ONT is greater than the overload optical power.
The optical power received by the ONT is less than the sensitivity value.
The ONT auto-discovery function of the GPON port is not enabled.
OLT uplink port down

Answer(s): A,B,C

Reveal Solution Next Question

QUESTION: 76

When the MA5680T traffic is scheduled, which traffic will be marked as yellow?

Traffic below CIR
Traffic above CIR but below PIR
Traffic above PIR
Traffic above CBS

Answer(s): B

Reveal Solution Next Question

Free H35-211 Exam Braindumps (page: 20)

QUESTION: 73

QUESTION: 74

QUESTION: 75

QUESTION: 76