Huawei H35-211_V2.5 Exam
HCIP-Access V2.5 (Page 8 )

Updated On: 12-Feb-2026

1 100/8, voice gateway
Under the H.248 protocol, if the signaling IP and media IP are both 10. 1 1 1.
When configuring voIP service, the following command is incorrect is 10. 1 1 10010 1 1 1 Configure the

  1. Using the command ip address media10 in voip mode. 1 media IP
  2. Use the reset coldstart command under Voice Interface to make the interface property configuration take effect
  3. Use the if-h248 attributei command to configure interface properties under the voice interface 1 10010 1 1 1 Configure
  4. Using the command ip address signaling10 in voip mode. 1 the signaling IP

Answer(s): D



When the invitation message sent by user A reaches user B after passing through server C, D, E, the message received by user B is VI

  1. The server address of the field information record is in descending order.
  2. C->D->E
  3. E->C->D
  4. E->D->C
  5. C-E->D

Answer(s): C



The establishment, maintenance and dismantling of the word path between the SIP user and the server are done through the interaction of the --series of messages, so that every information contained in the SIP text has a --nature, There is no phenomenon in which a single information value appears multiple times.

  1. wrong
  2. Right

Answer(s): A



Max-Forwards fields can be used in S1P messages to solve loop problems and avoid endless packet forwarding.

  1. wrong
  2. Right

Answer(s): B



Regarding multicast, the following description is incorrect

  1. Add Lgmp user under BTV, and by default, multicast users can watch 8 programs.
  2. The user-issued Report is captured in the single board logic and sent to the single board CPU
  3. Device-based global configurations of Layer 2 groups refer to common parameters of protocols ( IGMP Proxy, GMP Snoop) to all
  4. When the igmp match mode disables, you need to configure the multicast program group

Answer(s): D






Post your Comments and Discuss Huawei H35-211_V2.5 exam prep with other Community members:

Join the H35-211_V2.5 Discussion