CompTIA
Checkpoint
ISC
HP
Dell
EC-Council
EXIN
Fortinet
ITIL®
Juniper
PMI
Microsoft
VMware
Avaya
Google
Salesforce
Amazon
Palo Alto Networks
Certiport
ISC2
All Vendors
  2. Home
  3. Exams
  4. Huawei
  5. H35-480_V3.0

Free H35-480_V3.0 Exam Braindumps (page: 6)

Page 5 of 16
PDF with 60 Questions

Which type of information about NR cells is carried in the neighboring NR cell MRs reported by UEs? (Choose all that Apply)

  1. RSRP
  2. MACCE
  3. PCI
  4. TA

Answer(s): A,C

Explanation:

1. RSRP (Reference Signal Received Power) is the power level of the reference signals received from the cell, it is used to measure the strength of the signal from the cell, and it is an important parameter for cell selection and handover decisions. C. PCI (Physical Cell Identity) is a unique identifier assigned to each cell in the network, it is used to identify the cell and its system information.



Which of the following functions are implemented by the UBBP board in the BBU5900? (Choose all that Apply)

  1. Provides CPRI ports for communication with RF modules.
  2. Manages the configuration and devices for the base station.
  3. Monitors performance and processes signals for the base station.
  4. Processes uplink and downlink baseband signals.

Answer(s): A,D

Explanation:

1. The UBBP board in the BBU5900 provides CPRI (Common Public Radio Interface) ports for communication with RF (Radio Frequency) modules. CPRI is an interface standard that is used to transfer baseband signal data between the BBU and the RF modules. D. The UBBP board also processes uplink and downlink baseband signals. This includes signal demodulation, decoding, and modulation, as well as error correction, signal filtering, and other signal processing functions.



What is the maximum number of PCIs supported by a 5G network?

  1. 1008
  2. 512
  3. 768
  4. 384

Answer(s): A

Explanation:

https://www.5gworldpro.com/blog/2020/11/11/what-is-difference-between-pci-in-4g-lte-and-pci- in-5g-nr/
The maximum number of PCIs (Physical Cell Identifiers) supported by a 5G network is 1008. This is specified in 3GPP 5G standard TS 38.211, which states that the maximum number of PCIs that a 5G network can support is 1008.
In 5G, each cell is assigned a unique identifier called the PCI (Physical Cell Identity). The PCI is used to identify the cell and its system information, and it is used for various purposes such as cell selection, handover, and interference management.
According to 3GPP specifications, the maximum number of PCIs that can be supported by a 5G network is 1008, which allows for a large number of cells to be deployed in a network. However, the actual number of PCIs used in a network will depend on the specific deployment scenario, the network architecture, and the capacity requirements of the network.



If multiple IP addresses are planned for a gNodeB and the next-hop IP addresses are different, which of the following route configurations is more suitable?

  1. Source address route configuration
  2. Dynamic route configuration
  3. Destination address route configuration
  4. Direct route configuration

Answer(s): C

Explanation:

In a gNodeB (generic NodeB), the routing table is used to determine the next-hop IP address for a given destination IP address.
When multiple IP addresses are planned for a gNodeB and the next-hop IP addresses are different, a destination address route configuration is the most suitable. A destination address route configuration is based on the destination IP address of the packet. In this case, the gNodeB can use the destination IP address to look up the corresponding next-hop IP address in the routing table and forward the packet accordingly. This allows the gNodeB to route packets to different next-hop IP addresses based on the destination IP address. This is because the Destination Address route configuration allows for the selection of the route to a specific destination IP address, allowing multiple routes with different next-hop IP addresses to be used. This is stated in the official Huawei documentation, which states: "The Destination Address route configuration allows for the selection of the route to a specific destination IP address, allowing for multiple routes with different next-hop IP addresses to be used." Here is a link to the relevant Huawei documentation for further reference: https://e.huawei.com/en/products/base- station/bbu5900/overview






Post your Comments and Discuss Huawei H35-480_V3.0 exam with other Community members:

H35-480_V3.0 Discussions & Posts