Huawei H35-920 Exam Prep
HCDA - OWS Developer (Page 23 )

• Plenum: Describes a fire-resistant cable jacket rating, not a transmission medium or speed.
• Ethernet: Describes a networking technology; Ethernet can use copper or fiber, so the term alone does not identify the fastest cable type.
• DAC (Direct Attach Copper): Uses copper and is typically intended for short-distance, high-speed connections in data centers.

• The table is large.
• Queries frequently filter or join on particular columns.
• The table’s natural data order does not support good micro-partition pruning.
• Clustering improves performance enough to justify its maintenance cost.

1. x = -100
2. -100 < x < 100
3. 100 = x < 1000
4. x = 1000

• -500 ? class 1
• 0 ? class 2
• 100 ? class 3
• 1000 ? class 4

• Note the question number before leaving—for example, Question 38.
• Use the exam’s question navigator or Back/Previous button to return to that number.
• If you close or refresh the page, your position may not be saved, depending on the site. Reopen the page and select the question number again.
• Avoid using the browser’s Back button if it causes the exam page to reload; use the exam’s built-in navigation instead.

• Custom domains are supported.
• It provides dedicated compute instances.
• It offers enough storage for the applications.
• It supports multiple instances with load balancing between them.
• It is less expensive than higher tiers such as Premium.

• Free and Shared use shared compute and have limited storage, so they cannot meet the dedicated-instance requirement.
• Basic provides dedicated compute and custom domains, but the question’s requirement for the broader multi-instance/load-balancing capability is intended to point to Standard.

• SAML (Security Assertion Markup Language): Commonly used for enterprise SSO between an identity provider and cloud applications. It sends signed authentication assertions to the service provider.
• RADIUS: Primarily used for centralized authentication to network devices, VPNs, and wireless networks.
• EAP: An authentication framework commonly used with network access technologies; it is not typically the SSO protocol for SaaS applications.
• OpenID: Related to identity authentication, but traditional enterprise SSO questions involving cloud applications generally expect SAML. OpenID Connect is a newer authentication layer built on OAuth 2.0.

xml 
<apex:page> 
    <apex:stylesheet value="{!URLFOR($Resource.MyStyles, 'styles/main.css')}" /> 
</apex:page>

• <apex:includeScript> is for JavaScript.
• <apex:includeStyle> is not a valid Visualforce component.
• <apex:require> is not the Visualforce tag used to load CSS.

• Link-local — FE80::/10; valid only on the local link/subnet and not routed by routers.
• Multicast — FF00::/8; identifies a group of interfaces rather than a private address range.
• Global unicast — 2000::/3; publicly routable IPv6 addressing.

• Process Builder: Automates actions based on record changes; it does not create interactive user forms.
• Approval Process: Routes records for approval and captures approval decisions.
• Outbound Message: Sends information to an external system; it does not provide a user interface.

• Technical platform interfaces: Important for integration and interoperability, but they should support—not drive—the architecture.
• Scalability of the network: Valuable as the organization grows, but a scalable solution is ineffective if it does not meet business or security needs.
• Development methodologies: Relevant to implementation, but they do not define the organization’s fundamental security requirements.

• 255.255.255.128 = /25: 128 total, 126 usable
• 255.255.255.192 = /26: 64 total, 62 usable
• 255.255.255.224 = /27: 32 total, 30 usable
• 255.255.255.240 = /28: 16 total, 14 usable

• One for the network address
• One for the broadcast address

• 8 total addresses
• 6 usable addresses
• Mask: 255.255.255.248

• The users currently have Office 365 Enterprise E3 licenses assigned directly.
• Assigning Microsoft 365 Enterprise E5 through a group does not automatically remove their directly assigned E3 licenses.
• From the Licenses blade, you can select the E3 product and remove it from all assigned users in one operation. This requires less effort than editing 2,500 users individually.

• Identity Governance manages access reviews, entitlement management, and related governance—not bulk license removal.
• Set-AzureAdUser does not remove product licenses.
• Set-WindowsProductKey applies Windows product keys and is unrelated to Microsoft 365 licensing.

• Tokenization: Replaces the value with a nonsensitive token, often reversible through a secure token vault.
• Hashing: Converts data into a one-way fixed-length value, generally used for integrity checks or password storage.
• Obfuscation: A broad term for making data difficult to understand; it is less precise than masking in this context.

• Custom domains: Supported by Basic and higher tiers.
• Dedicated compute: Basic and Standard use dedicated virtual machine instances; Free and Shared use shared infrastructure.
• Load balancing between instances: Standard provides scaling across multiple instances with load balancing.
• Storage: Standard provides more storage than Basic.
• Cost: Standard is the least expensive option that satisfies all the stated requirements.

• Free/Shared: Use shared compute and have limited features; they don’t meet the dedicated-compute requirement.
• Basic: Provides dedicated compute and custom domains, but does not provide the required Standard-level multi-instance capabilities in the exam’s feature comparison.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity; it is not the best control for scanning uploaded documents for malware.
• C. Load balancer: Distributes traffic among servers and improves availability, but does not inspect files for malware.
• D. WAF: Protects web applications against attacks such as SQL injection and command injection. It may help secure the upload function, but malware scanning is the key requirement here.

• Lower order numbers appear first.
• For example, a variable with order 100 appears before one with order 200.
• The Sequence field is not the control used for catalog variable display order.
• The Default Value sets a value, not placement.
• The Choice field defines selectable options, not the variable’s position.

• Existing measures
• Relationships
• Calculated columns
• Tables and fields
• Existing transformations in the model

• SharePoint folder: Reconnects to the source files. You would likely need to recreate the model and measures.
• Power BI dataflows: Primarily provide reusable data preparation and storage, but they do not automatically provide the existing semantic model and measures.
• Excel workbook: Connects directly to the source file and would also require rebuilding the model and measures.

• Admin access to the deployment pipeline
• Contributor access to the Development and Test workspaces
• Viewer access to the Production workspace

• Security groups
• Dynamic security groups
• Cloud-only or synchronized security groups

• Microsoft 365 groups
• Distribution groups
• Mail-enabled distribution groups

• A user connects with their Google account.
• Google associates the user’s SSH key with that identity.
• IAM roles determine whether they can log in.
• Access can be tied to a specific employee for auditing.
• Removing the IAM role removes their login access.

• compute.osLogin: regular OS login access
• compute.osAdminLogin: OS login with administrative privileges, typically including sudo

text 
enable-oslogin=TRUE

• Scale out during the hours when customer traffic is high.
• Scale in during low-demand periods, reducing instance-hours and cost.
• Use scaling policies based on metrics such as CPU utilization or request count.

• Multiple Availability Zones: Improves availability and fault tolerance, but does not automatically reduce cost.
• Placement group: Helps with specialized performance or low-latency requirements, not cost optimization.
• Private subnets: Improve network security, but do not automatically adjust capacity or reduce EC2 usage costs.

• 10.2.1.0 — network address
• 10.2.1.1 — usable host
• 10.2.1.2 — usable host
• 10.2.1.3 — broadcast address

• Customers may boycott V’s products.
• Supermarket customers may stop buying from V.
• Investors may view V as having higher legal, ethical and reputational risk.
• V could face fines, lawsuits, contract losses and higher costs.
• Expected future profits may fall.

• Use the grant-date fair value: $30
• Do not remeasure to the year-end value of $45
• Update the estimate of employees expected to vest

• Dr Share-based payment expense $450,000
• Cr Equity/share option reserve $450,000

• Accept: Acknowledge the risk and take no additional action.
• Transfer: Shift the risk or its financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reduce the likelihood or impact of the risk, such as by implementing security controls.
• Avoid: Eliminate the activity or exposure that creates the risk.

Manager role

DAX 
Country[Manager] = USERPRINCIPALNAME()

• Sales
• Human Resources

CFO role

• See sales for all countries
• See no Human Resources data

• Do not restrict the Country table or Sales table.
• Apply a filter to Human Resources that always returns false, such as:

DAX 
FALSE()

• One network address
• Two usable host addresses—one for each router
• One broadcast address

• Router A: 10.2.1.1
• Router B: 10.2.1.2

• Customer information must not be revealed ? PII Detection
• Malicious instructions embedded in images/documents must be blocked ? Prompt Shields

• If the question allows multiple selections, choose PII Detection and Prompt Shields.
• If it requires one selection specifically for the image-based threat, choose Prompt Shields.

• O File Gateway fornece uma interface de compartilhamento de arquivos usando protocolos como SMB ou NFS.
• Os usuários continuam acessando os arquivos localmente, aproveitando a baixa latência e o cache local.
• Os dados são armazenados de forma durável no Amazon S3, enquanto os arquivos acessados com frequência permanecem em cache no ambiente local.
• Isso amplia a capacidade de armazenamento sem exigir a substituição completa da infraestrutura existente.

• A: Montar buckets S3 diretamente não oferece uma experiência de compartilhamento de arquivos local tão adequada.
• C: Amazon WorkSpaces fornece desktops virtuais, não é uma solução principal de armazenamento compartilhado.
• D: Um volume EBS pertence a uma instância EC2 e não deve ser compartilhado diretamente entre vários usuários como um sistema de arquivos comum.

• A is incorrect: Flow Debugger is for debugging Salesforce Flows, not Trust Layer masking.
• B is incomplete/misleading: Requesting audit data may be part of reviewing the results, but collection and storage must first be enabled.
• C is correct: It describes the initial validation step.

• Allow only approved MAC addresses
• Limit the number of learned addresses
• Shut down or restrict a port when a violation occurs

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but it is not the direct control for limiting MAC addresses on switch ports.
• NGFW: Filters routed network traffic, while this attack targets Layer 2 switch behavior.

• A — Tables
• B — Named file formats
• C — Schemas
• E — Databases

Why these are correct

• Tables: Can be cloned using CREATE TABLE ... CLONE. The clone initially uses zero-copy cloning, so storage is shared until changes are made.
• Named file formats: Can be cloned as database objects, preserving the file-format definition.
• Schemas: A schema and its eligible objects can be cloned.
• Databases: A database and its eligible schemas and objects can be cloned.

Why the others are incorrect

• Shares: A share is an account-level data-sharing object, not a normal cloneable database object.
• Users: Users are security principals and cannot be cloned with CLONE.

• Data Cloud combines data from multiple systems.
• It resolves and organizes that data into a unified customer view.
• That unified view enables downstream actions such as personalized campaigns, segmentation, analytics, and activation.

• A = core platform value
• D = a resulting business use case or benefit

• Shared capacity

• Fabric capacity — F SKUs

• Fabric trial capacity

• Existing Power BI Premium — P SKUs

• A: It allows for branching and merging...

• C: It allows multiple engineers to work against the same code and configuration files and manage differences and conflicts.

• B: Build automation and infrastructure provisioning are handled by CI/CD and automation tools, not by version control alone.
• D: User Stories and backlogs are managed by project-management tools.
• E: Version control stores and tracks code, but it does not itself ensure that developers write effective unit tests.

• Verifies the sender’s identity using their private key.
• Confirms the transaction was not altered after signing.
• Provides evidence that the signer approved or originated the transaction.

• Digital certificates: Bind an identity to a public key, but do not themselves prove that a specific transaction was signed.
• Encrypted passwords: Protect confidentiality or authentication, but generally do not provide transaction-level nonrepudiation.
• One-time passwords: Authenticate a user for a session or transaction, but usually do not provide durable proof of who authorized the electronic record.

• Lead investigator: Coordinates the investigation and directs the response.
• Information security representative: Provides security expertise and helps assess the incident.
• Technical representative: Preserves system evidence, takes forensic backups, and supports technical analysis.
• Legal representative: Advises on legal, regulatory, privacy, and evidence-handling requirements.

1. Wireless AP

1. Router

1. Firewall

1. Device placement

• C: Develop the rule in the Rules Editor, define the events, match, and condition sections, then use the test rule feature. This directly validates the YARA-L rule without enabling it in production.
• A: UDM Search can help investigate data and refine filters, but it does not fully test YARA-L logic—especially complex event joins, match windows, and conditions.

• GPS coordinates
• Date and time the image was taken
• Camera or device model
• Exposure settings

• Log data: Records events or activities, such as system or application activity.
• Encrypted data: Information intentionally encoded to prevent unauthorized access.
• Sensitive data: A broad classification for information requiring protection; geolocation may be sensitive, but the technical type stored in the image is metadata.

• Orders contains order-level information, such as the order date.
• Order Line Items contains the products, quantities, and line amounts associated with each order.
• Merging them on the order key, such as OrderID, places the order date alongside each line item. This allows you to calculate total order value and analyze it over time.
• Product attributes can remain in the Products table and be related to the resulting line-item table through ProductID.

• Merging line items with products addresses product attributes but does not first provide the order-level date and value needed for time analysis.
• DAX calculated columns or lists add unnecessary model complexity.
• Calculating order counts is not the first requirement and does not combine the required order and line-item data.

• API tool matcher: runs a deterministic normalization command after the API tool returns.
• Write/Edit matcher: checks whether the target path begins with src/api/ and runs the linter.

json 
{ 
  "hooks": { 
    "PostToolUse": [ 
      { 
        "matcher": "api_tool", 
        "hooks": [ 
          { "type": "command", "command": "normalize-to-snake-case" } 
        ] 
      }, 
      { 
        "matcher": "Write|Edit", 
        "hooks": [ 
          { "type": "command", "command": "lint-if-under-src-api" } 
        ] 
      } 
    ] 
  } 
}

• Prevention costs: Avoiding defects, such as staff training and improved product design. The company has invested in these.
• Appraisal costs: Detecting defects before products reach customers, such as inspection and testing. The planned batch sampling has not been implemented.
• Internal failure costs: Correcting defects found before delivery.
• External failure costs: Dealing with defects after delivery, such as refunds, replacements, complaints and lost sales.

• Required response and resolution times
• Availability or uptime targets
• Performance standards
• Support obligations
• Remedies or penalties for failing to meet the terms

• SOW (Statement of Work): Defines the project’s scope, tasks, deliverables, and schedule.
• MOA (Memorandum of Agreement): Describes agreed responsibilities between parties, often for a specific activity.
• MOU (Memorandum of Understanding): Records a mutual understanding or intention, usually less formal than a contract.

bash 
OTEL_SERVICE_NAME=foundry-agent

bash 
OTEL_SERVICE_NAME=langchain-service

python 
import os 


os.environ["OTEL_SERVICE_NAME"] = "langchain-service" 


from azure.ai.openai... # import your tracing components 
from azure.monitor.opentelemetry import configure_azure_monitor 


configure_azure_monitor( 
    connection_string=os.environ["APPLICATIONINSIGHTS_CONNECTION_STRING"] 
)

• Agent application: OTEL_SERVICE_NAME=foundry-agent
• LangChain application: OTEL_SERVICE_NAME=langchain-service

• Disable high concurrency: Changes workspace-wide behavior and is not the targeted way to isolate these workloads.
• Modify the number of executors: Adjusts capacity and performance, but does not provide workload isolation.
• Set the default environment: Controls libraries and runtime configuration, not compute isolation.

• Minimum
• Maximum
• Average
• Count
• Null/empty values
• Distinct values

• Enable column profile
• Enable details pane
• Show column profile in details pane

• The Intune device limit restriction does not apply in the normal way; DEM enrollment supports up to 1,000 devices.
• However, the Microsoft Entra maximum number of devices per user setting can still impose a limit when the enrollment creates an Entra device object.
• Therefore, a DEM account is not automatically unlimited. The effective limit depends on the Entra device setting and the enrollment/join type.

• Where to find the TiMOS runtime image
• Which configuration file to load
• The IP address and related settings for the CPM management Ethernet port

• A: User authorization is configured in the router’s security configuration, not primarily in the BOF.
• C: Hardware initialization is performed by the boot process and system software.
• D: The system date and time are configured separately, often through NTP or CLI settings.