IBM C1000-088 Exam Prep
IBM Spectrum Storage Solution Architect V2 (Page 2 )

• Link-local — FE80::/10; valid only on the local link/subnet and not routed by routers.
• Multicast — FF00::/8; identifies a group of interfaces rather than a private address range.
• Global unicast — 2000::/3; publicly routable IPv6 addressing.

• IaaS: You deploy and manage virtual machines, including the operating system and installed software. Azure manages the physical datacenter, hosts, and networking infrastructure.
• PaaS: Azure manages the infrastructure and operating system, while you deploy and manage your application code. Examples include Azure App Service and Azure Functions.

• A. Periodically rotate responsibilities: May reduce some risks, but it does not directly detect unauthorized changes.
• B. Review segregation-of-duties conflicts: Identifies incompatible access combinations, not whether a specific data change was unauthorized.
• C. Log changes in an outside application: Logs provide evidence, but someone must review and analyze them. Logging alone does not detect misuse.
• D. Independent review: Directly detects unauthorized changes and reduces the risk that the person making the change can conceal it.

• Documented and formally requested
• Analyzed for security, cost, and operational impact
• Reviewed and approved by the appropriate personnel
• Tested before implementation
• Tracked and reversible if problems occur

• Risk management process: Identifies and evaluates risk, but does not directly authorize design changes.
• Product design process: Applies primarily while creating or developing the product.
• Design review process: May have identified the issues, but the next step for changing an already released design is controlled change management.

• B — Both inner and outer classes can be declared as with sharing.

• C — Inner classes do not inherit sharing settings from the container class.

apex 
public with sharing class OuterClass { 
    public with sharing class InnerClass { 
        // Explicitly uses sharing rules 
    } 
}

• Azure Resource Manager (ARM) templates
• Or, in newer Azure terminology, Bicep files

• B — Reviewing the strategy: Usually performed by a security steering committee or other governance body.
• C — Communicating the strategy: The security manager may help communicate it, but communication is not the primary governance responsibility tested here.
• D — Approving the strategy: Approval belongs to executive management or the appropriate governing authority, not the person who develops it.

• S3 Glacier Deep Archive is designed for long-term archival data with very infrequent access and has a lower storage cost than S3 One Zone-IA.
• The documents are copies stored elsewhere, so reduced availability and delayed retrieval are acceptable.
• An S3 interface VPC endpoint allows private access from the VPC without exposing the bucket through the public internet.
• A bucket policy can restrict access to requests coming through that endpoint.

• Internal hostnames and subdomains
• Network structure and naming conventions
• Servers and services
• Relationships between systems

• Determining ISP-assigned address space: Usually involves external registration and DNS information, not internal host discovery.
• Bypassing DNS sinkholing: Would require evidence that malicious DNS requests avoided redirection.
• Initial access: DNS queries alone do not show that the attacker gained access.
• Exfiltrating data: DNS tunneling can do this, but the snippet would typically show encoded or unusually long DNS queries.

• When the MVP will be defined — the MVP should already be understood sufficiently when assessing the business case.
• What the MVP is — useful information, but not the key requirement tested here.
• That the MVP is the same as project viability — incorrect. The MVP helps test viability; it is not identical to viability itself.

• terraform apply
• terraform destroy

• A is correct: It establishes the revised dates and identifies the effect on the critical path.
• B is premature: Stakeholders should be informed after the impact has been assessed and the updated schedule is understood.
• C is not automatically appropriate: Fast-tracking may introduce additional risk and should be considered only after analyzing schedule options.
• D is premature: Adding resources may not resolve a dependency and could increase costs without addressing the actual constraint.

• Red team: Simulates attackers; exploits weaknesses to test security.
• Blue team: Defends systems; monitors, detects, and responds to attacks.
• Purple team: Combines red- and blue-team efforts to improve detection and defense.
• White team: Oversees or manages the test, defining rules, scope, and authorization.

• The ERSPAN source is the device or interface whose traffic is being copied.
• The ERSPAN destination is the device receiving the encapsulated copy and forwarding it to the traffic analyzer.
• The local monitor session number is locally significant. Therefore, the source and destination do not need matching session IDs such as 47 or 48.
• The erspan-id identifies the ERSPAN stream and must correspond between the source and destination configuration.

• CSIRT: A Computer Security Incident Response Team that handles and coordinates incident response.
• CVSS: A scoring system used to rate the severity of vulnerabilities.
• SOAR: Security Orchestration, Automation, and Response technology used to automate security workflows.

• Default network device credentials: More associated with external attackers or poor device configuration.
• Spear phishing emails: Commonly used to compromise users, but less characteristic of an insider who already has access.
• Typosquatting and impersonation: Primarily social-engineering techniques aimed at deceiving users.
• Unidentified removable devices: Provide a direct way to transfer data outside the organization and may bypass network monitoring.

• Sets a high initial price for a new product.
• Targets customers willing to pay more, often called early adopters.
• Gradually reduces the price to attract more price-sensitive customers as the product becomes less novel and competition increases.

• Penetration pricing: starts with a low price to gain market share quickly.
• Premium pricing: maintains a high price to communicate superior quality or status; it does not necessarily involve later price reductions.
• Loss leader pricing: sells one product at a very low price, sometimes below cost, to attract customers who may buy other products.

• GPS coordinates
• Date and time the image was taken
• Camera or device information
• Image dimensions and software used

• Log data: Records generated by systems or applications, not normally embedded in image files.
• Encrypted data: Information intentionally encoded to prevent unauthorized access.
• Sensitive data: A broad classification, not the specific type of information being extracted.

• Prevention costs – costs incurred to stop defects occurring, such as staff training, quality planning and supplier evaluation.
• Appraisal costs – costs of checking whether products meet standards, such as inspection, testing and quality audits.
• Internal failure costs – costs of defects found before delivery to customers, such as scrap, rework and retesting.
• External failure costs – costs of defects found after delivery, such as warranty claims, returns, complaints and product recalls.

• Feedback form: Captures opinions, not necessarily actual behavior; users may not respond.
• Questionnaire: Relies on memory and subjective judgments about usefulness.
• Interviews: Can provide valuable qualitative insights, but a sample of users may not represent overall usage accurately.

• Power BI dataset — Reuses the existing tables, relationships, and measures. You mainly create new visualizations.
• SharePoint folder — Connects to the source files, but you would need to rebuild the model and measures.
• Power BI dataflows — Primarily provide reusable data preparation; they do not automatically provide the existing report’s measures and model.
• Excel workbook — Requires reconnecting to and modeling the source data again.

• The CSV contains the external users’ email addresses.
• The bulk invitation feature supports inviting many guest users in one operation.
• Each invited user becomes a guest account in contoso.com.

1. Find the subnet-mask increment in the octet where the prefix ends.
2. Identify the network address by finding the subnet boundary at or below the given IP.
3. The first usable address is network address + 1.
4. The broadcast address is one address before the next subnet.
5. The last usable address is broadcast - 1.

• 172.28.228.144/18

• 172.28.228.144/23

• Each team’s Bedrock workflow uses a separate IAM service role.
• The role’s Amazon S3 permissions can be limited to only that team’s customer folder or objects.
• This enforces least privilege and prevents one team’s Bedrock application from accessing another team’s data.
• Access is enforced by AWS permissions, not by asking users to provide a customer name in each request.

• A single role with broad S3 access does not provide team-level isolation.
• Asking teams to specify a customer name is not an access-control mechanism.
• Redacting data does not prevent unauthorized access.
• A bucket policy alone is insufficient unless it explicitly enforces the required team-role restrictions.

• SAML (Security Assertion Markup Language): Commonly used for enterprise SSO between an identity provider and cloud applications. It sends signed authentication assertions to the service provider.
• RADIUS: Primarily used for centralized authentication to network devices, VPNs, and wireless networks.
• EAP: An authentication framework commonly used with network access technologies; it is not typically the SSO protocol for SaaS applications.
• OpenID: Related to identity authentication, but traditional enterprise SSO questions involving cloud applications generally expect SAML. OpenID Connect is a newer authentication layer built on OAuth 2.0.

• Menerjemahkan soal ke bahasa Indonesia.
• Menyebutkan jawaban yang benar.
• Menjelaskan alasan jawaban tersebut.
• Memberi tahu jika kunci jawaban yang tersedia tampaknya keliru.
• Menjelaskan istilah teknis penting dalam soal.

• Limiting the number of MAC addresses allowed on a switch port
• Restricting ports to specific known MAC addresses
• Taking an action—such as dropping frames or shutting down the port—when the limit is exceeded

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but is not the primary control for switch-port MAC limits.
• NGFW: Filters network traffic at the firewall, but does not directly control MAC addresses learned by a switch.

• Amazon SageMaker — charges apply for compute, storage, and other resources used.
• AWS Config — generally charges for configuration recording and rule evaluations.
• Amazon CloudWatch — has a limited free tier, but many metrics, logs, alarms, and API usage can incur charges.

1. Yes — Microsoft Foundry provides a secure, governed environment for building and managing generative AI applications and agents. It brings together models, data, tools, evaluation, deployment, and monitoring.

1. Yes — Foundry is designed for enterprise workloads and supports scaling AI applications as usage grows. Scalability comes from the underlying Azure services and managed infrastructure.

1. Yes — Foundry can be used in solutions involving image recognition and computer vision. Applications can use vision-capable models and Azure AI vision capabilities for tasks such as image analysis, object detection, and OCR.

• Espionage: Stealing information for intelligence or competitive purposes.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: An attack sponsored or conducted by a government.
• Shadow IT: Technology or access methods used outside approved IT processes.

• Honeypots: Decoy systems or services made to attract attackers. Legitimate users should not interact with them, so activity there is a strong indicator of malicious behavior.
• DNS sinkholes: Redirect requests for known malicious domains to a controlled internal system. This can reveal infected hosts attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens.
• CI/CD: Automates software development, testing, and deployment.
• Threat modeling: Identifies and analyzes potential threats before or during system design.
• Data obfuscation: Makes data harder to understand or interpret.

• Bronze: Raw ingested data
• Silver: Cleaned, validated, and transformed data
• Gold: Business-level data for analytics, dashboards, and reporting

• You can configure different pre-shared keys for different device groups.
• All cameras could use one key.
• All scanners could use another key.
• Each key can be associated with an appropriate role or access policy.

• Customer information must not be revealed ? PII Detection
• Malicious instructions embedded in images/documents must be blocked ? Prompt Shields

• If the question allows multiple selections, choose PII Detection and Prompt Shields.
• If it requires one selection specifically for the image-based threat, choose Prompt Shields.

• The application failing to start or becoming unhealthy
• An incorrect probe path, port, or protocol
• The application needing more startup time
• Dependency or configuration failures
• A liveness probe being too aggressive

bash 
kubectl describe pod <pod-name> 
kubectl logs <pod-name> --previous

• Scale to more replicas: may hide the issue but does not diagnose it.
• Decrease initialDelaySeconds: makes probes run earlier and could worsen startup failures.
• Drain and reboot the node: node metrics are normal, so rebooting is not justified as the first step.

• Information sources: Collect security-related data, such as network packets, system logs, audit records, or application events.
• Analysis: Examines the collected data to identify suspicious activity, attacks, or policy violations.
• Response: Takes or recommends action, such as generating alerts, logging the event, or supporting a protective response.

• Outer packet: 10.5.1.1 > 52.165.16.154
• IPv4 protocol field: 41, which indicates IPv6 encapsulation
• Inner packet: IPv6 traffic between 2001:... addresses

• MAC address spoofing: Changes Layer 2 addressing; it does not explain the IPv6-in-IPv4 structure.
• Steganography: Hides data inside files or media, not visibly in a tunneled protocol.
• Broken encryption: No evidence of encryption being cracked.
• On-path sniffing: Involves intercepting traffic, not sending data to an external host.

• The message came from the claimed sender (authentication)
• The message was not altered (integrity)
• The sender cannot easily deny sending it (non-repudiation)

• Attackers can send unsigned phishing emails.
• Attackers may compromise a legitimate account and send signed malicious emails.
• Users may still be tricked by a validly signed message.

• Domínios personalizados.
• Armazenamento suficiente.
• Instâncias dedicadas.
• Balanceamento de carga.
• Menor custo entre os planos que atendem a tudo.

• Restrict a port to a defined number of MAC addresses
• Use statically assigned or “sticky” MAC addresses
• Shut down or restrict the port when violations occur

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect suspicious network activity, but is not the primary control for limiting switch MAC entries.
• NGFW: Filters traffic at the network boundary; it does not directly prevent MAC table flooding on access switches.

• True positive: The scan reports a vulnerability that really exists.
• False positive: The scan reports a vulnerability that does not exist.
• True negative: The scan correctly reports no vulnerability.
• False negative: The scan fails to detect a vulnerability that is actually present.

• JDBC
• SnowSQL
• Snowflake Web Interface (UI)
• ODBC
• Python connector

• Two-part tariff pricing: $10 per unit
• Dual pricing: $20 per unit

Two-part tariff pricing

Dual pricing

• Division X, the seller, is credited with the market price: \(\$20\)
• Division Y, the buyer, is charged the marginal cost: \(\$10\)

• Create a CodeCommit repository in the secondary Region.
• Use CodeBuild to run a Git mirror operation from the primary repository to the secondary repository.
• Use EventBridge to detect relevant repository events, such as a pull request being merged.
• Invoke a Lambda function, which starts the CodeBuild project.

• B: Amazon S3 is object storage, not a Git repository that developers can use as a CodeCommit remote.
• C: CodeArtifact is intended for packages and artifacts, not source-code repository mirroring.
• D: An AWS Cloud9 environment is not an appropriate automated replication mechanism and would require manual or persistent infrastructure management.

• Maximum response and resolution times
• Expected uptime or availability
• Performance requirements
• Escalation procedures
• Consequences for failing to meet requirements

• SOW: Defines a project’s scope, tasks, deliverables, and schedule.
• MOA: Documents specific responsibilities agreed upon by two parties.
• MOU: Records a general understanding or intent to cooperate.

• Each Case must follow defined support steps.
• Each step must be completed within a specified time limit.

• Case Escalation Rules: Escalate Cases based mainly on age or criteria; they do not model a complete sequence of service steps.
• Process Builder with Scheduled Actions: Can automate time-based actions but is not the standard framework for Case service-level commitments.
• Omni-Channel Routing: Routes work to agents based on capacity and priority; it does not track Case lifecycle deadlines.

• Unfamiliar locations or IP addresses
• Anonymous or malicious IP addresses
• Leaked credentials
• Unusual sign-in behavior

• Lower order numbers appear first.
• For example, a variable with order 100 appears before one with order 200.
• The Sequence field is not the control used for catalog variable display order.
• The Default Value sets a value, not placement.
• The Choice field defines selectable options, not the variable’s position.

• The requirement is to obtain an assessment of the Azure environment’s design.
• The proposed solution is the Premier support plan.
• Premier can provide this type of guidance, but it is a higher-tier, more expensive option.
• The question specifically says to keep costs to a minimum. A lower tier—typically Professional Direct in the support-plan model used by this question—provides architectural/design guidance.

1. Install a Cassandra-compatible ODBC driver.
2. Configure a data source name (DSN), if required.
3. In Power BI Desktop, select Get Data > ODBC.
4. Choose the configured DSN and connect.

• Microsoft SQL Server database: Connects to SQL Server, not Cassandra.
• OLE DB: Requires a compatible OLE DB provider; this is not the standard choice for Cassandra in Power BI.
• OData: Requires Cassandra data to be exposed through an OData service, which is not the normal direct connection method.