Promoting assets to a deployment space
The following assets can be promoted to a deployment space:
Saved models
Data assets for use in model deployments
Data refinery flows and dependent assets
Connections defined in your project
Scripts
Functions
Shiny apps
https://www.ibm.com/docs/en/cloud-paks/cp-data/3.5.0?topic=functions-deployment-spaces

Show Answer Next Question

QUESTION: 4

Which service is used to perform descriptive analytics and can answer the question, "what happened in my data?"

SPSS
Cognos Analytics
Decision Optimization
Watson Machine Learning

Answer(s): C

Show Answer Next Question

QUESTION: 5

What is the minimum number of worker nodes required on a production level Cloud Pak for Data Red Hat OpenShift cluster?

Answer(s): A

Explanation:

A production-level cluster must have at least 3 worker nodes, but you might need to deploy additional worker nodes to support your workload.

Show Answer Next Question

Download PDF Next Page

Viewing page 5 of 14
Viewing questions 21 - 25 out of 63 questions

Post your Comments and Discuss IBM C1000-136 exam prep with other Community members:

Comments:

Name:

C1000-136 Exam Discussions & Posts
C1000-136 AI Verifications

Vgf on: July 20, 2023
Please provide me the dump
Anonymous

lunch_break_labs on: June 18, 2026
Three weeks of intense studying and endless brain dumps left me exhausted but I finally passed this exam. It was very hard and I had to rely on the AI Assistant and real exam questions to make it through.
Australia

CramSession_Pro on: July 05, 2026
The exam was very hard and the real exam quetions were not what I expected at all. Spent hours with brain dumps and still struggled.
Sweden

linuxlover99 on: May 08, 2026
Failed two times and teh exam dumps finally made the difference. The AI Assistant was only helpful for very hard parts of this exam.
Egypt

TechNerd92 on: May 05, 2026
Spent weeks diving into braindumps and still found the exam very hard. Without real exam questions in the dumps I would still be at square one.
Thailand

chiara_devsec on: July 01, 2026
Took two attempts because I underestimated this exam and really had to grind through the braindumps to understand the material. The real exam questions were very hard and left me exhausted.
Belgium

priya_devops on: May 14, 2026
This exam was very hard but braindumps and the AI Assistant helped clarify tough concepts. Without them I'd still be rethinking my answers and second-guessing till the end.
Lebanon

tryhard_techie on: June 19, 2026
The AI Assistant adn braindumps were key to passing this exam on my second try. It felt very hard and I wasn't sure I'd make it.
Saudi Arabia

n0d3_n on: June 25, 2026
Passed it after using some exam dumps because this exam was very hard. The real exam questions were not what I expected even after all the prep.
New Zealand

0day_ops on: June 06, 2026
Passed it after weeks of stress with brain dumps and real exam questions but it was challenging and very hard.
Ireland

git_push_g on: March 31, 2026
Passed it after struggling through a challenging exam with brain dumps and real exam questions. Very hard even with the dumps.
Sweden

ExamSurvivor_T on: May 09, 2026
Underestimated how very hard this exam was and had to rely on braindumps to grind through. passsed it thanks to the exam dumps plus the AI Assistant but it was a close call.
United States

nina_sysadmin on: May 20, 2026
Spent weeks on this challenging exam and the braindumps really helped. The AI Assistant was good for clarifying real exam questions.
Portugal

ZeroTrust_Z on: June 18, 2026
Passed it but the brain dumps were outdated and the real exam questions were very hard.
Nigeria

PingOfDeath_P on: July 02, 2026
The exam was very hard and relied heavily on exam dumps and real exam questions to finally pass.
United States

always_learning_a on: May 23, 2026
The exm dumps helped a lot but the real exam questions caught me off guard. Very hard and I needed two attempts to clear this exam.
Lebanon

amara_itpro on: June 06, 2026
The exam dumps were a huge help because this exam was very hard to understand without them. Finally done and ready to move on.
Bangladesh

failedOnce_Mike on: April 13, 2026
Passed it after two attempts and found the exm dumps didn’t cover everything. Real exam questions were very hard and caught me off guard.
Indonesia

certgrind_2025 on: June 26, 2026
Spent weeks trudging through brain dumps and the exam was still very hard. Only passed thanks to the real exam questions I found last minute.
Israel

dmitri_linuxpro on: April 10, 2026
Spent weeks going over brain dumps and still found myself unprepared for this exam. Stressed throughout but barely passed in the end.
Romania

SkippedTheBook on: July 13, 2026
Took two attempts to barely pass this exam and the brain dumps were a huge help. Real exam questions were very hard and had me sweating.
Jordan

it_dad_of_3 on: April 23, 2026
Underestimated this exam and ended up grinding through a lot of exam dumps to pass. The real exam quetions were very hard but the AI Assistant helped me sort through the braindumps.
Saudi Arabia

vlanjockey on: July 04, 2026
Spent weeks on the brain dumps but the real exam questions caught me off guard. That AI Assistant was helpfull but this exam was very hard.
Denmark

fatima_netsec on: June 22, 2026
Spent weeks with braindumps and was still caught off guard by the real exam questions. The AI Assistant didn't cover everything and it was a very hard exam.
Singapore

CiscoFan_J on: June 04, 2026
Real exam questions threw me off despite weeks of studying and the braindumps I found were not much help.
Belgium

dhcp_d on: April 11, 2026
Spent too many nights stressing over this exam and teh real exam questions were still very hard. The brain dumps helped but I barely cleared it.
Australia

raj_cloudguru on: April 25, 2026
Exam dumps and the AI Assistant got me through this challenging exam but it was still very hard. Almost thought I'd need another try.
Malaysia

5igmas on: May 22, 2026
Three weeks of prep and the brain dumps still didn't cover some real exam questions. It was a very hard and challenging exam that caught me off guard.
Argentina

p1ng_pro on: April 28, 2026
Spent weeks going over brain dumps and real exam questions to handle this very hard exam. Without those exam dumps it would have been much tougher.
Poland

CramSession_Pro on: April 29, 2026
Real exam questions were scarce and the dumps saved me after two failed attempts. Challenging exam and the stress was real.
South Africa

tcpdump_t on: April 25, 2026
Took two attempts as teh real exam questions were very hard and caught me off guard. The exam dumps were somewhat helpful but didn't cover everything.
Indonesia

yaml_yak on: June 25, 2026
Spent weeks trying to understand GitHub Actions as this exam was very hard. teh exam dumps were a relief in tackling the real exam questions.
United States

WrongAnswerRight on: April 23, 2026
Three weeks of flipping through brain dumps finally did the trick after the stress of prepping. A challenging exam like this needed the real exam questions for me to pass.
United States

moni on: June 26, 2026
yes. really helpful
Coimbatore, India

omar_itpro on: June 20, 2026
Underrated how tough this exm was initially but after grinding through a mountain of exam dumps I got through it. The brain dumps were crucial for understanding the real exam questions.
Philippines

mark_passed_aws on: July 06, 2026
The AI Assistant and braindumps helped with this challenging exam. It felt very hard but I finally passed.
Italy

anya_cloudarch on: April 26, 2026
Wasn't sure I'd pass this exam but the braindumps and AI Assistant made it manageable. Very hard and wouldn't have done it without both tools.
India

ExamSurvivor_T on: June 01, 2026
Spent weeks stressing over this exam which was very hard until I found some exam dumps that helped a lot.
Luxembourg

samazureguy on: May 23, 2026
Three weeks of late nights and I finally passsed thanks to braindumps and that AI Assistant. This exam was very hard and I'm just relieved it's over.
Poland

FourthTimesFine on: June 18, 2026
Finally done with this exam after trying everything from braindumps to the AI Assistant. It's very hard and took more effort than expected but real exam questions helped a lot in the end.
Turkey

ali_cloud_sa on: May 23, 2026
This exam was very hard so I had to rely on exam dumps to get through. teh braindumps made it possible but the stress was real.
Turkey

chiara_devsec on: May 07, 2026
Spent weeks on this exm but real exam questions and brain dumps were key to finally passing it.
Spain

ipv6_ready on: July 03, 2026
Spent weeks digging through braindumps and relying on the AI Assistant becuase this exam felt very hard. Unsure if I'd ever pass but somehow got through it.
Qatar

dmitri_linuxpro on: April 25, 2026
After weeks of tackling brain dumps for this exm the stress was palpable but managed a pass eventually with some help from the real exam questions.
Turkey

JustPassedBro on: June 06, 2026
Barely passed this exam after days of stress and using tons of brain dumps. Very hard to keep everything straight even with the AI Assistant pointing things out.
Oman

anya_cloudarch on: May 10, 2026
Real exam quetions caught me off guard and the braindumps were only somewhat helpful for this challenging exam. The AI Assistant filled in some gaps but it was a stressful experience overall.
Malaysia

PassedMyWife_Out on: April 23, 2026
That exam was very hard but the brain dumps got me through. Honestly spent most nights dreading it but glad it's over.
India

n0d3_n on: June 13, 2026
The exm was very hard and brain dumps were my last resort. Took two attempts but real exam questions made a difference.
Chile

back_to_it_2026 on: June 09, 2026
Passed it after realizing how very hard this exam is and relying on some exam dumps for extra support. The brain dumps helped but it took more effort than expected.
Poland

AnsibleAndy on: July 05, 2026
The AI Assistant showed me the real exam questions and braindumps were surprisingly useful. Passing this exam felt very hard but I'm glad it's over.
India

AI Explanation - verified by User2380 on: June 26, 2026
Question 6:
Question 6 asks why you’d see “Prompt not found” when opening a shared Copilot prompt from another company. The page shows the answer as C, but that seems questionable.

The answer key says: The prompt contains a reference to a file you do NOT have access to (C).

In my view, the more likely cause is: The prompt is outside of your organization (B). Copilot prompts are typically tenant-bound; sharing a prompt link across tenants is often blocked by cross-tenant restrictions or requires explicit licensing/configuration. If the external tenant hasn’t granted access or your organization’s policies block external prompts, you’d get a not-found or access-denied result.

Why B fits better:

Cross-tenant restrictions block external prompts from loading.

Licensing and prompt privacy settings can prevent access to externally shared prompts.

The error message aligns with access/app policy rather than a specific file reference.

Bottom line: The provided key says C, but the most plausible explanation is B (prompt is outside your organization) due to tenant restrictions and access controls.
Hyderabad, India

AI Explanation - verified by User4186 on: July 01, 2026
Question 19:

Answer: No.

Why: Achieving a 99.99% SLA for virtual machines in Azure requires deployment across two or more Availability Zones (AZs) with at least two VMs, typically behind a load balancer. The solution in question uses two VMs but only one AZ, which does not meet the multi-AZ requirement for 99.99% availability. Also, one VM cannot span multiple AZs, so the stated setup is not valid for meeting the goal. To meet the goal, deploy at least two VMs across two AZs (one per zone) behind a load balancer, and ensure storage is zone-redundant. This aligns with Azure’s AZ availability guidance.

Glasgow, United Kingdom

AI Explanation - verified by User4164 on: June 22, 2026
Question 1:
I can’t see the exhibit image, but here’s the concept behind Question 1.

The destination is 10.10.13.10/32. A single-host IP like this is matched by a host route (prefix length /32).

A network route would cover a subnet, e.g., 10.10.13.0/24 or 10.10.0.0/16. It routes traffic to all hosts in that network, not just one host.

A default route (0.0.0.0/0) is used only when no other more specific route exists.

A floating static route is a static route with a higher administrative distance, used as a backup if a more preferred route fails.

Because the destination is a specific host address (/32), the technically correct type is a host route. The route would win over any longer-prefix network route due to the longest-prefix match rule.
If the exam key shows B (network route), that contradicts the standard interpretation. It could be due to the exhibit suggesting traffic to a network containing the host, or an error in the key. In standard Cisco routing practice, you’d use a host route for 10.10.13.10/32.
Dunn, United States

AI Explanation - verified by User1740 on: July 07, 2026
Question 12:
The correct answer is AWS Service Catalog.

Why: It lets an organization publish and govern a catalog of IT services and infrastructure "products" for end users. Each product is typically defined by an IaC template (for example, a CloudFormation template), and you can enforce approvals, access controls, and constraints to ensure only approved configurations are deployed. This directly supports governance of deployed IT services and IaC templates.

Why not the others:

- AWS Resource Explorer: used for discovering resources across accounts, not for governance of IaC templates. - AWS Organizations: good for multi-account governance and policy management, but not for managing and governing IaC templates themselves. - AWS Systems Manager: focuses on operational management, automation, and patching, not on central governance of IaC templates.
Would you like a quick walkthrough of how to set up a simple product in Service Catalog using a CloudFormation template?
Rawalpindi, Pakistan

AI Explanation - verified by User7618 on: July 07, 2026
Question 73:
Correct answers: C and D

C Bastion host: inbound SSH (port 22) allowed only from the company’s external IP range. This restricts initial access to the bastion from the on-premises network over the public internet.

D Application instances: inbound SSH (port 22) allowed only from the bastion host’s private IP. This ensures subsequent access from the bastion to the private EC2 instances stays on the private VPC path.

Why not A, B, or E:

A would block the initial SSH from the on-premises network to the bastion.

B would allow only internal IPs, which would block access coming from the on-premises network via the internet.

E would allow inbound SSH from the bastion’s public IP, which is not how traffic originates when going through the bastion (the source for traffic to the private instances will be the bastion’s private IP).

Belgrade, Serbia

AI Explanation - verified by User7097 on: June 24, 2026
Question 1:
Here’s how to think about Question 1.

It’s about group-based licensing in Azure AD. An Office 365 Enterprise E5 license can be assigned to a group, and every member of that group gets the license.

The key rule you need from the exam objective: licenses can be assigned to security groups. Other group types (like some distribution groups or Microsoft 365 groups) aren’t typically eligible for direct license assignment.

So, to answer, you look at the table and determine which groups are security groups. Those are the ones you can license directly. If all listed groups are security groups, you can assign the license to all of them.

If some groups aren’t security groups, they wouldn’t receive the license directly; you’d only license the security groups.

Answer in the bank (B: all five groups) presumes all five groups are security groups. In practice, verify each group’s type in the Azure AD portal (Licenses > select license > Assign groups) to confirm eligibility.
Gurugram, India

AI Explanation - verified by User3022 on: July 13, 2026
Question 56:

Answer: False. The page marks the answer as B, which corresponds to False.

Why:

The Import Wizard in Salesforce is designed for importing a subset of objects, typically including Accounts, Contacts, Leads, and Campaign Members.

Opportunities are not supported by the Import Wizard. To import Opportunity records, you should use Data Loader or the API (for larger volumes or more complex mappings).

Practical tip: If you need to bring in opportunities, create or link to the related Account first, ensure required fields like StageName and CloseDate are included, and use Data Loader (or a similar tool) to insert or upsert the data.

Bengaluru, India

AI Explanation - verified by User8771 on: June 29, 2026
So copilot avoid the public code

Short answer: Yes, Copilot is designed to avoid public code matches by applying the public code filter, which can block, alter, or deprioritize suggestions that resemble publicly available code.

But it’s not a perfect guarantee: some suggestions may still resemble public code or slip through if the match isn’t exact.

What to do:

- Review each suggestion for licensing and originality. - If in doubt, steer prompts toward unique implementations and add your own context. - Refer to the official docs on public code filtering and licensing for details.
Hyderabad, India

AI Explanation - verified by User6894 on: June 23, 2026
Question 36:
Question 36 asks: You want to be notified if deleted users downloaded many SharePoint documents in the month before their accounts were removed. Which feature should you use?

Best answer: Insider risk management policy

Why:

It is designed to detect and alert on insider threats, including data exfiltration via file downloads from cloud apps like SharePoint Online.

You can scope the policy to specific users (the ones being removed) and monitor data-access events (e.g., large numbers of downloads) within a defined window (e.g., the month before offboarding).

It generates incidents that your security team can investigate and it integrates with Microsoft 365 Defender.

Why the other options are less suitable:

File policy in Defender for Cloud Apps can alert on file activity in cloud apps but isn’t as tightly focused on offboarding scenarios and may not provide the same out-of-the-box “leaving employee” workflow as insider risk.

Access review policy is for certifying or revoking access, not for detecting or alerting on data downloads.

Alert policy in Defender for Office 365 targets email threats; not relevant to SharePoint document downloads.

What to do (high level):

In the Defender portal, go to Insider risk management > Policies > New policy.

Configure a policy for data exfiltration from SharePoint/OneDrive, scoped to the departing users.

Set a threshold (e.g., downloads above a certain count in 30 days) and enable alerts/incidents for investigation.

Hyderabad, India

AI Explanation - verified by User2971 on: June 27, 2026
Question 126:
Answer: D
Reasoning:

SW3 has all access ports in VLAN 50, so it has no ports in VLAN 60.

VTP pruning removes traffic for VLANs that have no active ports on downstream switches. If pruning is enabled in the VTP domain (and SW1 is the VTP server), VLAN 60 traffic will be pruned from trunks toward SW3.

Therefore, SW3 will only receive frames from VLAN 50.

Why the other options aren’t correct:

A: SW1(config)#vtp mode transparent — makes SW1 ignore VTP updates; pruning won’t function domain-wide.

B: SW3(config)#vtp mode transparent — SW3 would not participate properly in VTP domain traffic, defeating pruning.

C: SW2(config)#vtp pruning — pruning needs to be active in the VTP domain (server/clients); pruning on SW2 alone may not propagate as needed.

Plano, United States

AI Explanation - verified by User9130 on: July 07, 2026
why --from-literal tag and not from file
Short answer: --from-literal is just a convenient way to create a secret from a small, explicit key/value pair inline. from-file is for secrets stored in files.
Key points:

--from-literal=key=value: quick, explicit. You define the exact key name (key) and its value (value4) in the command.

--from-file: used when you have secret data in a file (e.g., password.txt, cert.pem). You either pass --from-file=path/to/file (which uses the file name as the secret key) or --from-file=keyname=path/to/file to set a specific key name.

For this question, key1=value4 is a tiny secret, so --from-literal is simplest and unambiguous.

Kubernetes encodes secret data in base64 automatically when stored.

Examples:

kubectl create secret generic another-secret --from-literal=key1=value4

If using a file: kubectl create secret generic another-secret --from-file=key1=path/to/value4.txt (or --from-file=path/to/value4.txt and rely on the file name as the key).

Munich, Germany

AI Explanation - verified by User5104 on: July 11, 2026
Question 86:
Question 86 asks which service improves network performance by sending traffic through the AWS worldwide network infrastructure.

Answer: AWS Global Accelerator (option C)

Why:

It routes internet-facing traffic over the AWS global network to the nearest healthy endpoint, reducing latency and jitter.

It uses static Anycast IP addresses and continuously monitors endpoint health, automatically steering traffic away from unhealthy endpoints.

Why the others aren’t correct:

Route table controls routing inside a VPC, not global network optimization.

AWS Transit Gateway connects VPCs and on-prem networks, but doesn’t optimize traffic paths across the AWS network.

Amazon VPC provides the virtual network itself, not a traffic-optimization service.

Dakar, Senegal

AI Explanation - verified by raman.thulasi71 on: June 25, 2026
Question 292:
Question 292 asks which capabilities are in the Platform Perspective of the AWS CAF. The two correct options are B) Data engineering and C) Continuous integration and continuous delivery (CI/CD).

B) Data engineering: The Platform Perspective focuses on building and enabling shared services and capabilities that platform teams provide to developers. Data engineering fits here as it covers data pipelines, storage, and data services that support workloads across teams.

C) CI/CD: Platform-level automation for software delivery, including CI/CD pipelines and related tooling, is a core platform capability to enable repeatable, rapid deployment.

Why the others aren’t correct:

A) Performance and capacity management is usually associated with operations or platform operations rather than the core Platform Perspective.

D) Infrastructure protection aligns with the Security Perspective.

E) Change and release management aligns with Governance/organizational processes, not primarily the Platform Perspective.

Hyderabad, India

AI Explanation - verified by User3233 on: June 24, 2026
Question 17:
Here’s a focused explanation of Question 17.

Scenario recap: You’re building a web app that serves streaming video, uses CI/CD, and you want high availability, a smooth streaming experience, and data stored close to users. The proposed solution is to include the use of Azure Redis Cache in the design. The question asks if this solution meets the goal (Yes/No).

What Redis Cache does: It provides fast in-memory caching to improve performance and reduce latency for frequently accessed data.

Why this alone doesn’t meet the goal:

- High availability across regions and constant streaming quality require more than a regional cache. You typically need global delivery and failover mechanisms, not just a cache. - Storing data “nearest to the user” suggests geo-distributed storage or a content delivery approach. A cache by itself does not guarantee locality or multi-region data freshness. - For streaming and global users, CDN or edge services (and possibly multi-region storage) are the standard approach to ensure low latency and availability.

Conclusion: The solution does not meet the goal. The correct answer is B (No). For global performance, you’d combine CDNs, global load balancing (e.g., Front Door/Traffic Manager), and geo-distributed storage rather than relying solely on a single regional cache.

Melissa, United States

AI Explanation - verified by User1018 on: July 15, 2026
Question 27:
Question 27 asks how to design an architecture to ingest raw data from up to 20 million connected vehicles so analysts can centrally query the data and predict catastrophic failures.
Answer: A
Why A is correct:

A push endpoint behind a load balancer handles massive fan-in from many devices while distributing load across servers.

A container cluster (e.g., Kubernetes) provides scalable, flexible processing for ingestion and orchestration of services.

Cloud Pub/Sub enables durable, scalable streaming of the raw vehicle data to downstream analytics, making real-time/near-real-time analysis feasible for centralized querying by analysts.

Proposed data flow (high level):

Vehicles push data to the endpoint (HTTP) behind a load balancer.

Ingestion services run in a container cluster and publish data to Cloud Pub/Sub.

Pub/Sub streams data to analytics processing (e.g., Dataflow) and storage (e.g., BigQuery) for central querying by analysts.

Why the other options are less suitable:

They don’t provide scalable, real-time streaming ingestion and centralized querying at the required scale.

Hartland, United States

AI Explanation - verified by sshuang68 on: June 28, 2026
Question 338:
Question 338 asks about the Cisco DNA Center Intent API. The two correct characteristics are:

northbound API

business outcome oriented

Rationale:

The Intent API is exposed to higher-level applications (northbound) to drive business outcomes, not device-level details.

It is not device-oriented, not southbound, and it is intent-based (not procedural).

Plano, United States

AI Explanation - verified by User8554 on: June 22, 2026
Do these questions come for the exam
Short answer: not reliably. These questions come from a community-contributed bank and are not guaranteed to appear on the actual exam. In fact, the page itself notes that a meaningful percentage of the provided answers are WRONG.
What you should do instead:

Focus on official objectives and Microsoft Learn material for the exam topic.

Use these questions only as rough practice to check understanding of concepts, not as a predictor of exact exam content.

If a question contains an image you can’t see here, describe it and I’ll explain the underlying concept.

If you want verified answers for the full question bank, that’s available with the premium/full version. I can also walk through any concept from these questions and map it to the official objectives. Which topic or item would you like to review?
Erode, India

AI Explanation - verified by juris.siksna on: June 27, 2026
Question 411:
Question 411 asks what two actions a project manager should take after the security department flags regulatory requirements.
Answer: The two correct actions are B and E.

B: Ask the security department for details about regulations. Why: You need precise, testable requirements to understand what must be complied with. Without specifics, you can’t analyze impact or plan properly.

E: Ask the team members to analyze the impact of including this regulation. Why: Impact analysis (cost, schedule, scope, risk) informs whether and how to implement the regulation and helps with prioritization and planning.

Why the other options aren’t the best immediate actions:

A: The product owner owns the backlog; without specifics, adding requirements is premature. The PM should gather details first (B) and analyze impact (E) before backlog actions.

C: Prioritizing with stakeholders is important, but you should first understand the regulation and its impact rather than asking for priority without analysis.

D: Instructing the team to include it in the next iteration skips the necessary impact analysis and refinement.

In short, gather specifics from security, then perform an impact analysis before altering backlog or sprint plans.
Riga, Latvia

AI Explanation - verified by beehibbler on: June 22, 2026
Question 400:
Question 400 correct answer: SLE

Why: Single Loss Expectancy (SLE) represents the monetary loss expected from a single cybersecurity incident. It answers “what is the impact of one incident?”

How it’s used: SLE = Asset Value × Exposure Factor (the portion of the asset that is actually lost).

Related concepts:

- ALE (Annualized Loss Expectancy) = SLE × ARO (frequency of incidents per year) — used for annual risk. - ARO is the rate of occurrence of incidents; not per-incident impact. - SLA is a service level agreement, not an impact metric.

Example: If asset value is $100,000 and exposure factor is 0.4, SLE = $40,000 per incident. If ARO is 3 per year, ALE = $120,000/year.

Jacksonville, United States

AI Explanation - verified by User4261 on: July 06, 2026
Explain a bit further. I have put plenty of devices through the autopilot process is that the same or no
Short answer: Autopilot is just a provisioning method. It doesn’t change the device-limit rules in Intune—the devices you enroll via Autopilot still count toward the per-user device limit.
Why this matters:

Each enrolled device counts against the user who signs in (the device owner in Intune).

If a device is reassigned to another user, it then counts toward that new user’s limit.

The effective limit for a user is the lowest limit from all Enrollment Restrictions policies that apply to them.

Where to check in Intune:

Go to: Devices ? Enrollment restrictions ? Device limits

Open each policy to see the Maximum number of devices and the Assigned Groups

The true limit for a user is the minimum across all policies affecting that user.

Tips for planning:

For Phoenix, ensure users have enough per-user device slots (adjust policies or assign to groups with higher limits).

You can query a user’s effective limit by listing all policies that include that user’s groups.

If you need more devices, either raise the limit or split devices across different users.

Want a quick walkthrough to adjust a policy for Phoenix users?
Indianapolis, United States

AI Explanation - verified by User4577 on: July 02, 2026
Question 12:

Answer: A (5)

Why: Each VM needs its own network interface. A single NIC can host both a private IP (in the subnet) and a public IP (via the NIC’s IP configuration), so you don’t need two NICs per VM. With five VMs, you’d use five NICs in total. The requirement for identical inbound/outbound rules can be satisfied by applying an NSG at the subnet or NIC level, but it doesn’t change the minimum NIC count.

Amsterdam, Netherlands

AI Explanation - verified by User5128 on: July 06, 2026
Question 31:

Correct answer: LACNIC (A)

Why:

Internet addresses are managed by Regional Internet Registries (RIRs): ARIN (North America), RIPE NCC (Europe/Middle East), APNIC (Asia-Pacific), LACNIC (Latin America and the Caribbean), AFRINIC (Africa).

Panama is in Latin America, so the IP’s registration would be in LACNIC.

Therefore, to find details about the IP, Bill should query LACNIC’s database (e.g., via a whois query or a LACNIC WHOIS web service).

Practical note:

If you’re validating, you’d perform a whois lookup for the IP to see the allocation and contact details. Be aware geolocation can be approximate, so corroborate with other sources if needed.

Dreieich, Germany

AI Explanation - verified by User5832 on: July 14, 2026
Question 9:
Question 9 asks about the limits of aggregation pipelines.

Correct answer: B) “16 MB document and 100 MB RAM”

Why:

- MongoDB documents have a maximum size of 16 MB, so each input document in an aggregation is bounded by 16 MB. - Aggregation pipelines are allowed to use up to about 100 MB of RAM for processing. If more memory is needed, you can enable disk spilling with allowDiskUse to use temporary disk space.
Other options are incorrect because:

They propose a 2 MB document limit, which is not the current document size limit.

Some options ignore the 16 MB document limit or the RAM limit.

Kochi, India

AI Explanation - verified by User5071 on: July 06, 2026
Question 10:
La respuesta correcta es A (Sí).

¿Qué se pregunta? Configurar un Azure Internal Load Balancer (ILB) como listener para un grupo de disponibilidad de SQL Server Always On en VMs de Azure.

¿Qué implica Floating IP? Es la característica que permite que la IP frontal del ILB “flote” entre las VMs del backend.

¿Por qué es necesario? Con un ILB, al hacer failover de la réplica primaria, necesitas que la IP del listener permanezca estable para los clientes. Si no habilitas Floating IP, la IP podría no redirigirse correctamente al nodo activo, interrumpiendo la conectividad del listener.

Resultado: al activar Floating IP se garantiza que el listener siga siendo alcanzable y que el tráfico se dirija a la réplica primaria actual, satisfaciendo el objetivo.

Notas: la documentación de Microsoft indica que para listeners de AG con ILB se requiere habilitar el Floating IP.
Cholula, Mexico

AI Explanation - verified by User5603 on: June 25, 2026
Question 32:
Question 32 asks how to deploy resources for geographic load testing across multiple Regions without adding code to the application.
Correct answer: B
Why:

This uses a single CloudFormation template that defines the load-test resources.

With StackSets, you can deploy that template across multiple Regions from one operation, without changing your application code.

This is ideal for multi-region provisioning and centralized management.

Why the other options aren’t as suitable:

A: Involves deploying a Lambda function in each Region to create stacks—this adds application code and orchestration logic, which violates “without additional application code.”

C: An SSM document isn’t designed for provisioning resources across Regions; it targets managed instances and runbooks, not multi-region infrastructure deployment.

D/E: Manual or region-by-region deployment with CLI is more error-prone and doesn’t scale as cleanly for multi-region setups as StackSets.

Key concepts: CloudFormation templates, AWS CloudFormation StackSets, multi-region deployments.
Gurugram, India

AI Explanation - verified by User4409 on: July 04, 2026
Question 13:
Question 13 asks how to import so only new records are added to a Data Extension.

Correct answers: B and D.

Why:

B (Ensure the data extension has a Primary Key): A primary key defines uniqueness. You need a key field to determine what’s “new” vs. “existing.”

D (Update type "Add Only"): This import mode inserts only records that don’t already exist in the DE. It avoids updating or overwriting current rows.

Why the others aren’t right:

A Overwrite would replace all existing data with the import, not what you want.

C Add and Update would insert new rows and also update existing ones, which contradicts “only new records.”

Implementation notes:

Ensure the target DE has a meaningful primary key (e.g., subscriber ID or email) and that the import file includes that key.

In the Import task, choose update type Add Only and map the key fields correctly.

If a record with the same key already exists, the Add Only import will skip or error for that row, depending on settings.

Important: the exam key here (B and C) is incorrect; based on Salesforce Marketing Cloud behavior, the correct pairing is B and D.
Pune, India

AI Explanation - verified by User5110 on: June 23, 2026
Question 49:
Here’s a concise breakdown of Question 49.
What the policy does

Scope: Sub1

Exclusions: Sub1/RG1/VNET1 (these are excluded from the policy)

Policy: Append a tag named Tag4 with value value4 to resources

Result: Tag4 will be added to resources under Sub1 that are not in RG1 or VNET1.

Evaluate each statement

Box 1: “The Azure Policy will add Tag4 to RG1.”

- Answer: No - Why: RG1 is explicitly excluded from the policy scope, so Tag4 is not appended to RG1.

Box 2: “Tags applied to the resource group or subscription aren't inherited by the resources although you can enable inheritance with Azure Policy.”

- Answer: No (in this context) - Why: By default, tags on a parent scope (like a resource group or subscription) aren’t automatically inherited by child resources. The statement suggests inheritance can be enabled via Azure Policy, which isn’t a standard, reliable mechanism in this scenario. The policy shown simply appends Tag4 to applicable resources; it doesn’t create a true inheritance of existing tags from RG/sub to their children.

Box 3: “VNET1 is excluded from the Azure Policy so Tag4 will not be added to VNET1.”

- Answer: Yes - Why: VNET1 is listed in the exclusions, so Tag4 will not be added to it.
If you want, I can walk through how tag inheritance is handled in Azure Policy vs. direct tagging, or apply similar logic to another scenario.
Wellington, New Zealand

AI Explanation - verified by User8952 on: June 27, 2026
Question 20:
Answer: D and E — Azure Cognitive Search and Azure App Service

Why: Provisioning a QnA Maker resource typically creates an App Service to host the QnA API/UI, and it also provisions a Cognitive Search service to enable fast search over the knowledge base.

Why not the others:

- Language Understanding, Azure SQL Database, and Azure Storage are not automatically created as part of the standard QnA Maker provisioning in RG1.

How to verify: In RG1, list resources and look for an Azure App Service (host) and an Azure Cognitive Search service. This confirms the two automatically created resources.

Kolkata, India

AI Explanation - verified by User4144 on: June 23, 2026
Question 14:
Here’s how to think about Question 14.

A /30 uses 255.255.255.252. That gives 4 addresses per subnet: network, two usable hosts, and broadcast.

In any /30 (last octet block), usable hosts are only the two addresses in the middle; the first is the network, the last is the broadcast.

For the block 10.2.1.0/30 (the only option using a /30 among the choices), the addresses are:

- Network: 10.2.1.0 - Usable: 10.2.1.1 and 10.2.1.2 - Broadcast: 10.2.1.3 Therefore 10.2.1.3 (option A) is the broadcast, not usable.

Options B and C use /29 (255.255.255.248), not /30, so they don’t meet the requirement of a /30 subnet.

Option D uses 225.255.255.252 with a 209.165.201.2 address and a 225.x.x.x address is multicast (not a usable unicast interface address). So it’s also invalid for a point-to-point /30.

Conclusion:

None of the provided options give a valid usable host IP for a /30. The correct pattern would be something like 10.2.1.1/30 or 10.2.1.2/30 (within the 10.2.1.0/30 block). The stated answer (D) is not correct.

Pescara, Italy

AI Explanation - verified by User1869 on: July 05, 2026
Question 1:

The correct answer is D: Risk Management.

Why: In TOGAF, Risk Management is the process of identifying, assessing, and responding to risks that may affect enterprise objectives. It specifically involves balancing the positive opportunities and negative threats that could realize, i.e., weighing potential gains against potential losses.

What the other options miss:

- Agile development: a software/organizational approach, not a formal balance of opportunities/threats at the enterprise level. - Architecture: the structure/design of the system, not the risk-balancing process. - Security: protecting assets, not the broader risk/benefit balancing of opportunities and threats. - Transition Management: managing change, not the explicit risk-balancing concept.

Quick note: Risk management in TOGAF covers identifying risks, analyzing their impact, deciding on responses, and monitoring effectively across the architecture.

Kanpur, India

AI Explanation - verified by User7105 on: June 25, 2026
Question 9:
Question 9:

Answer: B and C

Why B works:

- Input JSON path as List(Contact) treats the input as an array of Contact objects. OutputJSON Path as Contact maps that array into the output under the Contact node, producing a JSON structure that contains the list of contacts.

Why C works:

- Input JSON Path as Contact (the container of the items) and Output JSON Path as contact with Output Data type as List creates a JSON array under the output path, aligning with the goal of producing a JSON array of contacts.

Why A might be less direct:

- Using a formula LIST(Contact) adds a separate calculation step; while possible, it introduces extra configuration and may not map cleanly to the required output structure in Transform.

Why D is unlikely:

- Output Path as List(Contact) isn’t a standard path form for DataRaptor Transform mapping and would not correctly create the desired array in the output.
Lucknow, India

AI Explanation - verified by juris.siksna on: June 29, 2026
Question 456:
The question asks what to do during closing when a deliverable isn’t meeting customer expectations. The best move is to address the gap by renegotiating scope so that both parties are satisfied.
Answer: C
Why:

Closing doesn’t mean ignoring issues. If a deliverable doesn’t meet expectations, you should work with the customer to agree on a revised scope that will satisfy both sides. This may involve a change in scope that is processed through the change control process, leading to new acceptance criteria and sign-off.

This keeps the project aligned with customer needs while ensuring formal acceptance or a clearly defined path to resolution.

Why the other options are weaker:

A suggests the customer must issue a change request, which isn’t typically how the PM handles defects or gaps; changes usually come from the project team or customer through formal change control.

B is vague and doesn’t drive a path to resolution or re-define acceptance criteria.

D inappropriately escalates to the sponsor before attempting direct negotiation for a revised scope.

Key takeaways:

In closing, address unmet deliverables via a negotiated scope change that satisfies both parties and leads to formal acceptance.

Riga, Latvia

AI Explanation - verified by User7882 on: July 16, 2026
Question 1:

The question asks which Azure support plans allow you to open new support requests.

Key concept:

- Basic plan: mainly for billing/subscription support; does not include technical support or the ability to file new technical incidents. - Developer, Standard, Professional Direct, Premier (paid plans): include technical support and allow you to open new support requests.

Therefore, the correct choice is the plan(s) other than Basic (i.e., Developer, Standard, Professional Direct, Premier). If the provided key lists only one option as correct (A), it may be incomplete or misleading—the official plans page shows that Basic does not meet the requirement, while the paid plans do. See: https://azure.microsoft.com/en-us/support/plans/

Noida, India

AI Explanation - verified by User6250 on: July 07, 2026
Question 3:
Umbuzo 3 uthi: ukuba inkampani inesigqibo se-Azure Basic support plan kwaye ifuna ukuvavanywa komklamo wedeseni we-Azure evela kwa-Microsoft, oku akuxhaswa yiplani eliqhelekileyo. Umgomo kukufuna isikimu esivumela le nkonzo ngenjongo yokubiza ukuphambili ngexabiso eliphantsi. Isisombululo esinikiweyo: “Premier” plan. Ngaba isisombululo sihlangana nomgomo?
Impendulo: Ewe.
Kungani:

Iplaani ye-Premier ibandakanya i-(Architectural Review) okanye ngqo izithandazo zokuhlola uyilo lweendawo ze-Azure, ezivumela inkampani ukuba icelwe ingxelo-nkcazo yokuthi uyilo lwakho luqondakala njani kusuka kwaMicrosoft.

Iplani ethi “Basic” ayiniki olu hlolo lwesakhiwo (architectural assessment) njengenkonzo esemagqabini.

Ngoko ke, ukuthetha ngokulula: ukhetho lwePremier luyahambelana nomgomo wokufumana ukulinganisela/uhlolo lwesakhiwo ngaphantsi kwezindleko eziphantsi ngokungafiki kwiindibano ezingenayo. Qaphela: izincoko ezininzi zingahluka kwiinguqulelo zeenkonzo, kodwa kumgaqo weMMS (Azure support plans) iArchitectural Review iyinxalenye yePremier.
Cape Town, South Africa

AI Explanation - verified by User5975 on: July 15, 2026
Question 14:
Question 14 asks how to enable ETD detections for data exfiltration with minimal Cloud Logging costs.

Correct answer: A

Why:

- ETD detections rely on Cloud Audit Logs that record data access. Data exfiltration is primarily about reads of sensitive data, so you only need the "data read" audit logs. - Limiting to the designated sensitive Cloud Storage buckets and BigQuery datasets minimizes log volume (and cost) while still providing the necessary visibility for detections. - Enabling "data write" logs (B) isn’t needed for detecting exfiltration, as it concerns modifications, not reads. - Enabling logs for all resources (C) would be unnecessary and costly. - VPC Flow Logs (D) don’t capture in-service data-access events for ETD detections.

Takeaway: For data exfiltration detection with ETD, opt for targeted data read audit logs on the designated resources to balance visibility and cost.

Bengaluru, India

AI Explanation - verified by User3792 on: July 06, 2026
Question 32:
Question 32 asks how to track contractors (Contacts) who move between agencies (Accounts) while keeping historical accuracy.
Key concept:

A contractor can be linked to multiple agencies over time, which is a many-to-many relationship. To preserve history (which agency they were with, when, and for how long), you should model this with a relationship object that can hold attributes like start date and end date.

The recommended approach is to create a junction object to represent the relationship between Contacts and Accounts (Agencies). This lets you store relationship data (dates, roles, status) and report on historical and current associations.

Why the other options are less suitable:

A) Using a partner community doesn’t address the data modeling for historic relationships.

B) Creating a new Contact for each agency dups data and loses the single source of truth.

D) Enabling Contacts to multiple Accounts describes the capability but is effectively implemented via a junction (AccountContactRelation). Without a dedicated junction object, you lose the ability to store relationship-specific attributes.

Answer: C — Create a Junction object to track a many-to-many relationship. If you’re on newer Salesforce versions, this is often implemented via the built-in Account-Contact relationship (AccountContactRelation) behind the scenes, but the explicit junction object pattern is the clear, interview-safe approach.
Bengaluru, India

AI Explanation - verified by User5722 on: June 30, 2026
Question 12:
The correct answer is "Only 1" (Option D).
Why:

In Salesforce, a user has exactly one Profile. The profile defines the baseline permissions and access (objects, fields, apps, etc.).

A user cannot have multiple profiles. However, you can grant additional permissions using Permission Sets—these are additive and do not replace the profile.

If different baseline access is needed for another task, you would create/clone a different profile for another user, not assign multiple profiles to the same user.

Bengaluru, India

AI Explanation - verified by User5634 on: July 04, 2026
Question 37:

Answer: D

Why D is the best explanation:

- The engineer previously showed initiative and solved problems creatively, yet now declines the invitation. This suggests a motivational issue tied to growth and recognition. - If the project manager hasn’t sufficiently supported and recognized the engineer’s professional growth, the engineer may feel unrewarded or stuck, leading to reluctance to take on new work. - PMI-themed reasoning: effective team motivation and development require recognition, clear growth opportunities, and alignment with career goals.

Why the other options are less likely:

- A (hiring process): Doesn’t fit why a previously proactive engineer would decline a new project. - B (burnout): Possible in some contexts, but no burnout indicators are given; D directly addresses motivation and growth. - C (not feeling welcome): Could matter, but D specifically targets growth/reward which often drive acceptance of new assignments.
Riga, Latvia

AI Explanation - verified by User1796 on: July 11, 2026
So which option is the correct? Because I assigned the A option and the website and the correct answer provided is the B.
The correct option is A: 10.10.13.0/25 via 10.10.10.2 [1/0].
Why:

Cisco uses Administrative Distance (AD) to choose between routes to the same destination.

The four routes to 10.10.13.0/25 have ADs: 1 (static), 108, 110, 110.

The lowest AD wins. A static route with AD 1 beats dynamic routes (AD 108/110).

So R1 will install the static route (A) and forward to 10.10.10.2. The key you’re seeing (B) is incorrect for this scenario.
Rio Pardo, Brazil

AI Explanation - verified by User5104 on: July 11, 2026
Question 109:
Question 109: The correct choice is A. Amazon FSx.
Why:

Amazon FSx for Windows File Server provides a fully managed Windows file server with SMB support, designed for Windows-based applications that need a shared file system.

It integrates with Windows features (Active Directory, NTFS permissions) and offers encryption, backups, and high availability.

The other options are not file servers for Windows apps: EKS is for managed Kubernetes, ECS for container orchestration, and EMR for big data processing.

Dakar, Senegal

AI Explanation - verified by User8952 on: June 27, 2026
Question 21:
Correct answer: B
Explanation:

In Language Understanding (LUIS), you have an authoring resource (used to create and train intents/entities) and a separate prediction resource (used for runtime inference).

To add contributors, you grant them Azure RBAC access on the authoring resource via the Access control (IAM) page in the Azure portal. This controls who can edit and manage the authoring content.

A Conditional Access policy governs sign-in requirements and access at the directory level, not per-resource collaboration.

The prediction resource is for serving queries and its access is managed separately; you don’t add collaborators there for authoring work.

Kolkata, India

AI Explanation - verified by sshuang68 on: June 28, 2026
Question 294:
Question 294: The scenario describes guest users on the same guest WLAN being able to reach each other. The fix is to prevent client-to-client traffic on that WLAN.

Correct answer: A) implement P2P blocking

Why: P2P blocking (often called client isolation) stops peer-to-peer and direct client-to-client traffic at the WLAN level. This keeps each guest device from seeing or talking to other guest devices on the same SSID.
Why the other options aren’t suitable here:

MFP client protection: protects against certain client threats, not client isolation.

Wi-Fi Direct policy: related to devices connecting via Wi-Fi Direct, not typical guest WLAN isolation.

Split tunneling: used with VPNs to choose which traffic goes through the VPN, not for isolating devices on a WLAN.

If you want, I can walk through how to enable P2P blocking on a specific Cisco wireless controller version.
Plano, United States

AI Explanation - verified by amorbigail on: July 07, 2026
Question 163:
Yes. Deploying across two or more regions meets the goal.

Why: A region contains multiple datacenters. By placing VMs in separate regions, you isolate a datacenter failure to one region, so the services in the other region remain available.

Caveats: For true seamless failover, you’ll typically need additional setup, such as cross-region networking and data replication (e.g., Site Recovery, storage replication) and traffic routing (Traffic Manager or Front Door) to direct traffic to the healthy region after a failover.

Context: Availability Zones (within a single region) protect against a datacenter failure in that region, but across regions you guard against region-wide outages.

So the proposed solution is correct for meeting the goal, with the caveat that automatic failover requires proper DR/configuration.
Accra, Ghana

AI Explanation - verified by User1035 on: June 23, 2026
Question 144:
Answer: D

Why: In a regulated rollout that must stay flexible, a product backlog provides a living, prioritized list of work items, including regulatory or compliance changes. It lets the PMO and team adapt priorities as constraints evolve.

Why not A: A burndown chart shows remaining work over time, not visibility into regulatory constraints.

Why not B: A burnup chart shows scope vs. progress, but it still focuses on metrics rather than explicitly capturing regulatory constraints.

Why not C: A kanban board improves flow and accountability, but it doesn’t explicitly facilitate visibility into regulatory constraints.

How this helps: Represent regulatory requirements and changes as backlog items with clear acceptance criteria, and continuously re-prioritize as regulations evolve, maintaining governance without stalling delivery.

Marupe, Latvia

AI Explanation - verified by User2971 on: June 26, 2026
Question 61:
Here’s how to understand Question 61.

Correct choices: A and B

Why A is correct: The vswitch is software-based. When a broadcast frame arrives, the vswitch interrupts the host CPU to switch context so it can process the packet. This CPU interruption is part of the processing overhead that contributes to broadcast radiation.

Why B is correct: In virtualized environments, the Layer 2 domain can be very large, so a single broadcast frame may be delivered to many VMs. That amplification increases processing and overhead, i.e., broadcast radiation.

Why C is not correct: It’s not accurate to say virtual machines communicate primarily through broadcast. VM-to-VM traffic is mainly unicast through the vSwitch; broadcast is used mainly for discovery (e.g., ARP), not as the primary communication method.

D and E are not about why broadcasts radiate within the VM domain; they describe how traffic could be handled on the vSwitch-to-physical-switch path, which isn’t the core reason for broadcast radiation inside the VM environment.

Note: The answer key shown lists B and C, which conflicts with the Cisco concepts above. The A and B explanation aligns with how software-based vswitch processing and large L2 domains drive broadcast overhead.
Plano, United States

AI Explanation - verified by User5232 on: July 05, 2026
Question 57:
Question 57 asks which two tools are best to analyze an agile team’s performance when momentum is dropping. The recommended answers are A and C: Burndown chart and Cumulative flow diagram of completed features.

Burndown chart (A): Tracks remaining work over time within a sprint or release. If momentum is waning, the line may flatten or slope less steeply, signaling the team isn’t finishing planned work as quickly. It helps the team spot trends and adjust scope or commitments early.

Cumulative flow diagram (C): Shows how work items move through states (e.g., To Do, In Progress, Done) over time. It highlights bottlenecks (e.g., a growing In Progress band) and overall flow stability. It’s useful for diagnosing why momentum is fading—whether work is getting stuck or cycle times are increasing.

Why not the others:

Product backlog burnup (B) focuses on completed work vs. total scope, not immediate team momentum within iterations.

WBS (D) and Project schedule (E) are more traditional/plan-driven tools not typically used to analyze agile team performance.

In short: use burndown for pace of finishing work, and a cumulative flow diagram to visualize flow and identify bottlenecks.
Hyderabad, India

AI Explanation - verified by User5247 on: July 03, 2026
Prepare for the exam
I’m the Microsoft 365 Copilot and Agent Administration Fundamentals study assistant. I can help you prepare and walk through these questions.
Study plan (short, focused)

Key areas: Privileged access (PIM and time-bound activation), Entra ID concepts (CA, app registrations), auditing (Defender + Purview), identity security (Secure Score), phishing incident response, number matching MFA, and AI accountability.

Quick path: 1) Read the official docs on PIM deployment and time-bound activation. 2) Review Conditional Access basics and how CA enforces Zero Trust. 3) Understand how app registrations create service principals for third-party apps. 4) Learn where to view audits (Defender portal and Purview) and what they track. 5) Know what affects Identity Secure Score (global admins, password policies). 6) Understand number matching in Authenticator. 7) Review steps to investigate phishing in Defender.

Question highlights (concepts)

Q2: PIM provides time-bound role activation to enable Just-In-Time access.

Q3: To allow a third-party service to authenticate to Entra ID, create an App Registration (service principal).

Q4: Conditional Access policies provide the rules that control how users access cloud apps.

Q5: Accountability is the Microsoft principle that humans remain responsible for AI outcomes.

Q6: Number matching uses a code displayed on login and must be entered in the Microsoft Authenticator app.

Q7: Identity Secure Score is affected by the number of Global Administrators and whether passwords expire (never expire can improve score as a policy setting).

Q8: To review phishing incident impact, use the Defender portal (Incidents, Threat Explorer, etc.).

Q1: Auditing actions are tracked in Defender and Purview; “Search & Intelligence” in Admin
Sunderland, United Kingdom

AI Explanation - verified by somtoobi on: June 22, 2026
Question 246:
The correct answer is D: Recovery Time Objective (RTO).

Why: RTO is the maximum acceptable downtime after an incident. It defines how quickly systems must be restored to avoid significant business disruption, which matches the scenario described.

What the other options mean:

- RPO (Recovery Point Objective): maximum tolerable amount of data loss (how recent the data must be when restored). - Risk appetite: overall level of risk the organization is willing to accept. - Risk tolerance: acceptable variation in outcomes at a business level, not a specific downtime metric. - MTBF (Mean Time Between Failures): reliability metric for how long a system runs between failures.

Quick example: If the RTO is 2 hours, the DR plan must ensure all critical systems are back online within 2 hours of outage.

How to apply in practice:

Conduct a Business Impact Analysis to determine RTOs for critical systems.

Design DR strategies to meet those RTOs (e.g., failover to a hot/warm site, automated recovery).

Regularly test and update the plan to ensure you can meet the RTO.

Lagos, Nigeria

AI Explanation - verified by User7449 on: July 14, 2026
Question 9:

Answer: Sign up Azure Active Directory (Azure AD) Privileged Identity Management (PIM) for Azure AD roles.

Why: You must enable/activate PIM for your tenant before you can manage or discover privileged roles. Discovery of privileged roles is something you do after PIM is enabled, not the first step. The other options (consent, discovering resources) are either part of later setup or unrelated in this context.

Redmond, United States

AI Explanation - verified by sshuang68 on: June 28, 2026
Question 285:
Question 285 asks how to write an ACL that permits packets with an ACK in the TCP header.

Correct entry: access-list 110 permit tcp any any eq 21 established

Why: The Cisco ACL keyword established matches TCP segments that belong to an already established connection, i.e., segments that have the ACK bit set. This is exactly the behavior you want for TCP ACK packets (after the initial SYN/handshake). The destination port 21 is shown, but the key factor is the established keyword.

Why other options are not right:

- A uses tcp-ack, which is not a standard, portable match in IOS ACLs and may be device-specific. - B/C differ only by ACL numbering; the essential concept is using established to match ACK-containing segments. - D uses ip and would not specifically target TCP ACKs.
Tip: If you want to permit all ACK-containing TCP segments regardless of port, you could use something like permit tcp any any established.
Plano, United States

AI Tutor 👋 I’m here to help!

IBM C1000-136 Exam Actual Questions IBM Cloud Pak for Data v4.x Solution Architecture (Page 5 )

QUESTION: 1

QUESTION: 2

QUESTION: 3

Explanation:

QUESTION: 4

QUESTION: 5

Explanation:

IBM C1000-136 Exam Actual Questions
IBM Cloud Pak for Data v4.x Solution Architecture (Page 5 )