Promoting assets to a deployment space
The following assets can be promoted to a deployment space:
Saved models
Data assets for use in model deployments
Data refinery flows and dependent assets
Connections defined in your project
Scripts
Functions
Shiny apps
https://www.ibm.com/docs/en/cloud-paks/cp-data/3.5.0?topic=functions-deployment-spaces

Show Answer Next Question

QUESTION: 4

Which service is used to perform descriptive analytics and can answer the question, "what happened in my data?"

SPSS
Cognos Analytics
Decision Optimization
Watson Machine Learning

Answer(s): C

Show Answer Next Question

QUESTION: 5

What is the minimum number of worker nodes required on a production level Cloud Pak for Data Red Hat OpenShift cluster?

Answer(s): A

Explanation:

A production-level cluster must have at least 3 worker nodes, but you might need to deploy additional worker nodes to support your workload.

Show Answer Next Question

Download PDF Next Page

Viewing page 6 of 14
Viewing questions 26 - 30 out of 63 questions

Post your Comments and Discuss IBM C1000-136 exam prep with other Community members:

Comments:

Name:

C1000-136 Exam Discussions & Posts
C1000-136 AI Verifications

Vgf on: July 20, 2023
Please provide me the dump
Anonymous

GCPengineerT on: July 05, 2026
Real exam questions were tough and caught me off guard despite using brain dumps. This exam was very hard even with the AI Assistant's help.
Brazil

k8skevin on: June 15, 2026
I wasn't feeling too confident about the exam at first but the practice questions really helped. This website's resources let me gradually learn and improve over time.
Egypt

ServerlessSid on: July 23, 2026
The exam was tougher than I expected but the practice questions on this site helped make it manageable.
Ukraine

backtoit2026 on: June 01, 2026
I'm always juggling work tasks but managed to squeeze in some study sessions here and there. Thanks to the practice questions on this site I finally passed the exam.
Netherlands

PanicStudy_Mode on: June 09, 2026
Braindumps and the AI Assistant were the only reason I passed this exam on my second attempt since it was very hard.
Germany

WrongAnswerRight on: April 23, 2026
Three weeks of flipping through brain dumps finally did the trick after the stress of prepping. A challenging exam like this needed the real exam questions for me to pass.
United States

CertHunter on: June 23, 2026
Took two attempts to pass this exam and the real exam quetions seriously caught me off guard. The brain dumps helped but it was still very hard.
Jordan

anya_cloudarch on: June 03, 2026
Thought I wouldn't pass this exm but the braindumps and the AI Assistant were helpful enough to get through. The challenging exam questions were a wake-up call for needed prep.
Kuwait

dmitri_linuxpro on: May 07, 2026
The exam dumps were nothing like the real exam quetions and it was a very hard journey. Burned out after getting tripped up on unexpected questions several times.
Australia

careerchangerc on: May 31, 2026
This exam was harder than I expected but still manageable with the help of this website's resources.
Latvia

weekendwarriorw on: May 11, 2026
Wasn't sure I'd make it through this exam but the AI Assistant and braindumps helped manage the pressure. The real exam questions felt very hard and required all the prep I could get.
South Korea

miket2024 on: May 02, 2026
I made slow progress but the review time was worth it. The practice questions were really helpful in understanding tricky parts. Happy to say I passed the exam eventually.
Pakistan

amara_itpro on: May 20, 2026
The real exam questions were very hard and caught me off guard despite all the brain dumps I went through. Spent weeks studying and the AI Assistant wasn't much help in the end.
Kenya

SkippedTheBook on: July 03, 2026
The exam was very hard but the braindumps and AI Assistant helped me get through it. Passed it after a couple of exhausting weeks.
Malaysia

PassedMyWife_Out on: May 04, 2026
The exam dumps didn't cover half of what showed up in the real exam questions. Very hard from start to finish.
Hungary

overtime_omar on: April 14, 2026
Barely scraped through this exam with a massive amount of brain dumps and it was still very hard. The stress was real but the dumps helped a bit.
Lebanon

ZeroTrustZ on: May 16, 2026
Juggling between work tasks and squeezing in some study sessions here and there made it tough to keep a steady pace but I managed. The practice questions on this website were pretty spot-on and helped me pass the exam.
Belgium

bgp_believer on: April 28, 2026
The exm was tougher than expected so I ended up spending nights on brain dumps just to make it through. These dumps were essential since traditional materials didn't cover everything.
Singapore

failedOnce_Mike on: May 24, 2026
Real exam questions were very hard compared to teh braindumps. The exam caught me off guard even with the AI Assistant's help.
United Kingdom

finnk8s on: June 16, 2026
I wasn't sure I could handle this exam at first. Thanks to the practice questions on this website I started feeling a lot more prepared over time.
Denmark

Mohammed on: July 28, 2026
The questions are same same as the real exam. This exam dump is quite good... just one note that free version gives you 50 to 60% access to all questions to get the full version you need to pay. I did that and I can say it is worth it. Saved a ton of time.
United States

cl0udpr0 on: April 29, 2026
Started using braindumps and the AI Assistant one week before the exm because this thing was very hard and I had zero confidence.
Greece

tcpdump_t on: May 13, 2026
The exam dumps were okay but the real exam questions caught me off guard. This was a very hard and challenging exam.
UAE

priyadevops on: June 25, 2026
Three weeks of studying and I still thought this exm was very hard. Thankfully the AI Assistant and braindumps helped fill in the gaps.
Rwanda

yaml_yak on: April 12, 2026
After struggling with this exam for weeks the brain dumps were my last resort adn they made it bearable. The real exam questions were very hard and I needed all the help I could get.
Singapore

yusufcerts on: June 27, 2026
The AI Assistant couldn't predict how very hard the real exam questions were and the braindumps didn't cover everything.
Denmark

laid_off_leveled on: May 15, 2026
Spent many sleepless nights with exam dumps for this very hard exam and barely scraped by.
Portugal

netm4pn on: June 18, 2026
The exam dumps didn't prepare me for how varied the real exam questions were and it threw me off guard quite a bit. Survived this challenging exam and the AI Assistant helped when I was stuck.
United Kingdom

chiaradevsec on: May 01, 2026
The exam was harder than I thought with topics beyond what I prepped for. Still the practice questions were spot on and helped a lot.
Finland

SplunkSam on: April 28, 2026
This exm was tougher than expected so I had to rely heavily on brain dumps to finally pass.
Argentina

gitadataeng on: May 08, 2026
I wasn't feeling too confident about the exam at first. The practice questions on this website really helped me understand what to expect and I improved over time.
Nigeria

sidehustlesysadmin on: June 05, 2026
I was squeezing in study time for this exam between work projects. Relieved to pass on the first try thanks to the practice questions here.
UAE

vlanjockey on: May 07, 2026
The real exam questions were nothing like the braindumps so this exam caught me completely off guard. Took two tries since the first was very hard and the AI Assistant wasn't much help.
New Zealand

l4brat on: May 06, 2026
Spent countless nights stressed over this exam but the brain dumps were a big help. The challenging exam had me worried but it’s finally done.
Austria

sidehustlesysadmin on: June 17, 2026
Fitting in some exam prep between projects was tough, but I managed to push through slowly. Passed the exam thanks to the AI assistant on this site guiding me with what to focus on.
United States

WrongAnswerRight on: July 17, 2026
Passed it on my second try since this exam was very hard and those exam dumps didn't really match the real exam questions.
Netherlands

CloudGuy_Mike on: June 01, 2026
Finally done with this challenging exam using the exam dumps and real exam questions but it took a lot out of me. The AI Assistant was helpful yet I still felt drained after every study session.
United Kingdom

DataCenter_Dan on: July 09, 2026
Three weeks of pouring over braindumps finally got me through this very hard exam. The AI Assistant proved somewhat useful in clearing up tricky parts.
Colombia

hamidcertguy on: June 18, 2026
The exam was tough but the prep from this site kept everything on track.
Saudi Arabia

JuniperJeff on: April 26, 2026
That exam was very hard and the real exam questions were more complex than the dumps suggested.
Sri Lanka

sidehustlesysadmin on: May 12, 2026
I squeezed in studying for this certification exam whenever I had a break between projects at work. The relevant questions and practice tests on the website really helped me pass it eventually.
China

9to5andstudy on: July 14, 2026
The exam was super stressful. I'm glad I had this site to help get through it.
UAE

SkippedTheBook on: May 11, 2026
Finally done with this exam and it was very hard but the braindumps helped a lot. The AI Assistant gave a good sense of the real exam questions.
Taiwan

scripts_and_certs on: April 17, 2026
This exam was very hard and the stress was real but the braindumps helped a lot. The real exam questions made little sense to me without those dumps.
Turkey

CoffeeAndCerts on: May 17, 2026
Passed it using braindumps adn the AI Assistant but this exam was very hard.
Ireland

FourthTimesFine on: April 08, 2026
Wasn't prepared for how very hard this exam was so I relied on exam dumps to get through it. Real exam questions were tricky but brain dumps made the grind bearable.
South Africa

late_night_labs_l on: April 28, 2026
The exam was very hard and I relied on brain dumps and real exam questions to finally pass. Stressful but glad it's over.
Hong Kong

r00tkit_r on: June 08, 2026
Took two attempts and barely got through the exam using brain dumps and real exam questions. The AI Assistant was helpful but it was a very hard exam overall.
Saudi Arabia

fa on: July 11, 2026
good platform
Dakar, Senegal

AI Explanation - verified by User7841 on: July 10, 2026
Il fatto di avere una tabella di metatadati cosa comporta , me los pighi
Una tabella di metadati significa che memorizzi solo le informazioni sui file (es. nome, percorso, estensione, data di modifica) senza i contenuti JSON. Ecco cosa comporta:

Dimensione e prestazioni: dataset molto piccolo, refresh rapidi e minor consumo di memoria, perché non carichi i contenuti dei file.

Aggiornamento e coerenza: la tabella riflette l’“inventario” dei file. se aggiungi/elimini file nella cartella, i metadati si aggiornano al prossimo refresh.

Scopo analitico: puoi creare metriche sul livello dei file (numero di file per estensione, per data, per cartella, file più recenti, ecc.), ma non puoi analizzare i dati all’interno dei JSON.

Limitazioni: non puoi estrarre o aggregare campi presenti nei JSON perché non vengono caricati; se serve analizzare il contenuto, devi caricare i dati reali (in modo controllato).

Sicurezza e governance: visibilità sulla struttura e sulla disponibilità dei file, ma attenzione a esporre percorsi/nomi sensibili.

Implementazione pratica: in Power Query rimuovi la colonna Content dopo aver usato Folder; pianifica refresh per tenere aggiornato l’inventario senza leggere i contenuti.

Rome, Italy

AI Explanation - verified by User6887 on: July 21, 2026
Question 29:
Answer: D) FF00::/12
Explanation:

IPv6 address types:

- Global Unicast: 2000::/3 - Unique Local (ULA): FC00::/7 - Link-Local: FE80::/10 - Multicast: addresses begin with FF (the whole multicast space is FF00::/8).

The block FF00::/12 is a subset of the multicast space, so it represents multicast addresses.

Therefore, this block forwards packets to a multicast address (to multiple receivers) rather than to a single unicast address.

The other prefixes are unicast and would deliver to a single interface.

Thiruvananthapuram, India

AI Explanation - verified by N0T123496giraffe on: July 14, 2026
What domain are these questions from
These questions come from the CompTIA Security+ exam. They map to multiple domains (not just one). The five Security+ domains are: Threats, Attacks and Vulnerabilities; Architecture and Design; Implementation; Operations and Incident Response; and Governance, Risk and Compliance. Rough mappings for the questions shown:

345 Patch management: 3.0 - Implementation

346 Obfuscation: 2.0 - Architecture and Design

347 Host isolation: 4.0 - Operations and Incident Response

348 IoT unencrypted traffic: 1.0 - Threats, Attacks and Vulnerabilities

349 Tabletop exercise: 4.0 - Operations and Incident Response

350 CVSS: 1.0 - Threats, Attacks and Vulnerabilities

351 Conflict of interest: 5.0 - Governance, Risk and Compliance

352 Fail-open (availability focus): 4.0 - Operations and Incident Response (can vary by version)

Note: exact mappings can vary by the specific Security+ version (e.g., SY0-601 vs SY0-501).
Mableton, United States

AI Explanation - verified by elisamangano02 on: August 03, 2026
Question 51:
Question 51 shows: let x = ('15' + 10) * 2; What is the value of a? (There’s likely a typo: there’s no a variable; the code assigns to x.)
Reasoning:

'15' is a string. With + and a string, JavaScript does string concatenation: '15' + 10 -> '1510'.

The result '1510' is then used in a multiplication: '1510' 2. The operator triggers numeric conversion, so '1510' becomes the number 1510.

1510 * 2 = 3020.

So, x equals 3020. The correct option is A.
Note:

If the code were let x = (15 + 10) * 2, the result would be 50 since 15 + 10 is numeric addition.

Sassari, Italy

AI Explanation - verified by is.chan.army on: August 03, 2026
Question 48:
Question 48 asks which guideline would help stop insider attacks by privileged users.

Correct answer: D – Do not enable default administrative accounts to ensure accountability.

- Rationale: Privileged accounts carry high risk. Default or shared admin accounts are hard to audit and easy for attackers to abuse. Disabling default accounts and requiring unique admin credentials improves accountability and reduces misuse.
Why the others are not correct:

A – Do not use encryption methods … backups and sensitive information: Encryption helps protect data; not using it increases risk, not reduces insider threats.

B – Do not allow administrators to use unique accounts during installation: We actually want unique admin accounts, not the opposite.

C – Do not control the access to administrators and privileged users: Failing to control access directly enables misuse.

In practice, combine D with broader controls: least privilege, separate admin and daily-use accounts, MFA, robust logging, and regular review of privileged activity.
Tamarac, United States

AI Explanation - verified by User6887 on: July 21, 2026
Question 24:
Question 24 asks how to get a global unicast IPv6 address that is derived from the interface’s MAC address.

Correct answer: enable SLAAC on an interface (C)

- Why: SLAAC allows a device to autoconfigure a global unicast address using the network prefix learned via Router Advertisements and an interface identifier derived from the MAC (the EUI-64 process). When SLAAC is enabled, the MAC-based EUI-64 identifier can be combined with the prefix to form the global address.

Why the other options are not correct:

- explicitly assign a link-local address: link-local (fe80::/64) is not global/routable. - disable the EUI-64 bit process: disabling EUI-64 would prevent deriving the MAC-based interface ID. - configure a stateful DHCPv6 server: DHCPv6 can assign addresses, but addresses derived from the MAC via EUI-64 are part of SLAAC, not DHCPv6-native address assignment.
In short, enabling SLAAC on the interface lets the device automatically create a global IPv6 address using EUI-64 from the MAC plus the learned prefix.
Thiruvananthapuram, India

AI Explanation - verified by is.chan.army on: August 03, 2026
Question 38:
Question 38 asks: What is the most recent NIST standard for incident response?

Options:

- A: 800-61r3 - B: 800-61r2 - C: 800-53r3 - D: 800-171r2

Answer: The correct choice is A (800-61r3).

Why:

NIST SP 800-61 Rev. 3 is the dedicated guide for incident handling/response and reflects the latest guidance on the incident response lifecycle (preparation, detection/analysis, containment, eradication, recovery, post-incident activity).

800-61r2 is an older revision of the same incident response guide.

800-53 covers security and privacy controls, not a specific incident response standard.

800-171 focuses on protecting CUI in non-federal systems and networks, not incident response guidance.

Note: The provided answer key says C, which is incorrect based on current NIST standards. If you want, I can summarize what’s new in 800-61 Rev. 3.
Tamarac, United States

AI Explanation - verified by User1610 on: July 19, 2026
Question 70:
I can’t see the hotspot image for Question 70. Please paste the text of the statements (the Yes/No items) or describe them, and I’ll walk through which are true and why.
In the meantime, quick tips for Azure hotspot questions:

Each statement is evaluated as True (Yes) or False (No) independently.

Key Azure facts to recall:

- A resource can exist in only one resource group. - A resource group is a management container for resources and can include resources from multiple regions. - Billing/scoping is typically at the subscription level, not constrained by a single resource group. - Resource groups contain metadata about contained resources, not the resources themselves.
Share the actual statements, and I’ll apply these concepts to determine the correct Yes/No for each.
Gurugram, India

AI Explanation - verified by User6290 on: July 20, 2026
Question 16:
Here’s how to think about Question 16.

The question asks why some tasks appear locked in the HR Guided Setup Module’s Task view.

The options are:

- A) They require an elevated role to access - B) They are deprecated tasks - C) They require other tasks to be completed first - D) They require a plugin to be activated first
What’s most likely correct

C) They require other tasks to be completed first. In guided setup flows, tasks are usually gated by prerequisites to ensure proper sequencing and data/configuration dependencies. You typically unlock a task only after the necessary preceding tasks are finished.

Why the other options are less likely

A) Elevated roles can restrict access in some contexts, but guided setup tasks are commonly gated by prerequisites rather than solely by role.

B) Deprecation isn’t the general pattern for “locked” tasks in the guided setup.

D) A plugin activation could unlock certain features, but the common gating mechanism is task dependencies, not plugin state.

Note on the provided answer

The page shows the answer as D, but based on how HR Guided Setup usually works, the more accurate reason is typically C (prerequisites). If you’re studying, treat C as the conceptual answer and be aware the listed key may be incorrect. If you want, I can walk through each option in more detail.

Kolkata, India

AI Explanation - verified by User9085 on: July 21, 2026
Question 17:
Question 17 asks how to classify unlabeled customer data into tiers for an ad campaign. The correct choice is B) Unsupervised learning.

Why: The data is unlabeled, so you can’t train a model with known input-output pairs. Unsupervised learning discovers structure in the data by grouping similar customers into clusters or tiers without labels.

What it does: Clustering and segmentation (e.g., k-means, hierarchical clustering, DBSCAN, Gaussian mixtures) to form meaningful groups.

Why the other options aren’t as suitable:

- Supervised learning requires labeled data to map inputs to known outputs. - Reinforcement learning learns through trial-and-error with a environment and rewards, not for static clustering. - RLHF involves learning from human feedback to shape outputs, not for unlabeled clustering.
If later you obtain labeled tiers, you could switch to supervised learning or semi-supervised methods.
Kwai Chung, Hong Kong

AI Explanation - verified by User6680 on: July 07, 2026
Question 332:
Correct answer: C

In IT asset management, the most significant risk is that unregistered assets are not included in security documentation. Without a complete, up-to-date asset inventory and linked documentation, you can’t apply proper controls, assess risk, or ensure compliance.

Why not the others:

- A) IT assets used for private purposes is a nuisance risk, but it’s primarily an acceptable-use or policy issue, not the core security risk of asset management. - B) Unregistered assets may not be supported is important, but its impact is downstream of not having assets documented at all. - D) Unregistered assets may not be configured properly stems from missing documentation, but the root problem is the absence of inventory and records (C).

Relationship to ISACA risk management: effective risk management requires a complete asset inventory linked to security controls and documentation; if assets aren’t documented, you can’t manage or measure risk properly.

Grovetown, United States

AI Explanation - verified by m.a.smith0616 on: July 23, 2026
Question 79:

The correct answer is “Think and work holistically” (Option B).

Why: ITIL 4’s guiding principles guide how to approach service management. “Think and work holistically” is the principle that focuses on the big picture—seeing the service, value streams, and the entire value system as an integrated whole. It’s about end-to-end delivery and understanding how all parts (people, processes, partners, technology) interact to create value.
How it differs from the others:

Focus on value: ensures outcomes matter to stakeholders, but isn’t specifically about end-to-end delivery.

Optimize and automate: about efficiency and performance, not the holistic view.

Collaborate and promote visibility: about teamwork and sharing information, not the end-to-end scope.

Bottom line: for end-to-end service delivery, holism is the guiding principle that most directly applies.
Portland, United States

AI Explanation - verified by ruben.batista on: July 15, 2026
Question 31:
The correct answer is C: Create separate Azure Event Grid topics and subscriptions for sign-in and sign-out events.
Why:

All authentication events must be processed by PolicyApp. By using two separate topics, you can route sign-in and sign-out events to the same app (via subscriptions pointing to PolicyApp), ensuring both types are processed.

Sign-outs must be processed as fast as possible. Isolating sign-out events on their own topic/subscription lets you scale and prioritize that path independently from sign-ins, reducing contention and latency.

Decoupling the flows provides better control and RBAC granularity. You can apply different access controls and scaling policies per topic/subscription if needed.

A single subscription with a subject filter (e.g., subjectBeginsWith) would still require handling both event types and wouldn’t offer the same isolation and independent scaling benefits as separate topics and subscriptions.

In short, separate topics and subscriptions give you independent routing, scaling, and prioritization for sign-in vs. sign-out events while guaranteeing PolicyApp handles all authentication events.
Valenza, Portugal

AI Explanation - verified by User9126 on: July 22, 2026
Question 9:

Correct answer: B — A reservation for the server based on the MAC address.

Why this is the best choice:

- A DHCP reservation ties a specific IP address to the server’s MAC address. The server will always receive the same IP while still using DHCP, which is easy to manage and avoids manual static configurations on the server. - This helps prevent IP conflicts and allows DNS/DHCP integration to stay consistent (e.g., dynamic DNS updates you might rely on with DHCP).

Why the other options are less suitable:

- A) A separate scope for the file server using a /32 subnet — A /32 subnet is not practical for IPv4 subnets in a typical DHCP scope; separate scopes aren’t needed just for a single server. - C) A static IP address within the DHCP IP range — This can lead to IP conflicts if another device is assigned the same IP; better to keep a reservation inside the DHCP scope or use an address outside the DHCP pool. - D) SLAAC for the server — SLAAC is IPv6 auto-configuration and doesn’t align with a DHCP-managed IPv4 environment (and servers usually require stable addresses regardless of IPv6 specifics).

Quick takeaway: Use a DHCP reservation to give the file server a fixed IP while still benefiting from centralized DHCP management.

Frankfurt Am Main, Germany

AI Explanation - verified by User1307 on: July 05, 2026
Question 80:
Here’s how to interpret Question 80 and why the page’s given answer may be off.

App1 should use: PaaS (Platform as a Service)

- Reason: You must be able to modify the code. PaaS provides a development framework and managed runtime, letting you focus on code while the platform handles OS and runtime upkeep.

App2 should use: IaaS (Infrastructure as a Service)

- Reason: App2 must run interactively with the server OS, i.e., you need OS control and admin access. IaaS gives you VMs where you manage the OS and can run interactive processes.
Notes:

The page’s explanation lists Box 2 as SaaS, which is not suitable here: SaaS is a fully managed application you don’t install or modify, and you don’t interact with the underlying OS.

In short: App1 ? PaaS; App2 ? IaaS. If you want, I can walk through why SaaS would not meet App2’s requirements.
Vijayawada, India

AI Explanation - verified by User4606 on: July 22, 2026
Question 11:
Answer: A. Use AWS Secrets Manager with automatic rotation.
Why this is correct:

The app on EC2 connects to Aurora using DB credentials stored on the instance. Secrets Manager centralizes these credentials and can rotate them automatically, eliminating manual updates on each EC2 host.

Automatic rotation reduces operational overhead and enhances security because credentials are rotated on a schedule without code changes.

The app can retrieve the current secret at runtime (e.g., via the AWS SDK) and use it to authenticate to Aurora, avoiding reliance on locally stored files.

Why the other options are less suitable:

B (Parameter Store) can store secrets but lacks seamless built-in rotation for database credentials like Secrets Manager; rotation often requires more custom work.

C (S3) would require complex tooling to rotate and securely fetch credentials and still risks exposure if access policies aren’t perfect.

D (Encrypted EBS volumes) would store credentials locally on each instance and does not automate rotation or centralized management.

So the best fit for minimizing operational overhead while securely managing database credentials is Secrets Manager with automatic rotation.
Bangkok, Thailand

AI Explanation - verified by nanrany on: July 30, 2026
Question 320:
The correct answer is A: Amazon Kendra.
Why:

Amazon Kendra is a managed enterprise search service that can index content stored in S3 and support natural-language queries to find text inside documents (PDFs, Word files, etc.).

Why the others aren’t suitable:

Rekognition analyzes images/videos, not document text search.

Polly is a text-to-speech service.

Lex is a chatbot service.

How to implement quickly:

Create a Kendra index.

Add a data source of type S3 and point it to your bucket (with an IAM role that allows access).

Configure/document conversion if needed, then index the data.

Use the Kendra API or console to run natural-language queries against your indexed documents.

Busan, South Korea

AI Explanation - verified by User8071 on: July 12, 2026
Question 127:
The correct answer is D.
Why D fits:

10 TB with maximum I/O: use EC2 instance store — it provides the highest local I/O throughput. It’s ephemeral, so not for durable data, but great as fast scratch storage for video processing.

300 TB durable storage: use Amazon S3 for long-term, highly durable storage (S3 Standard provides extremely high durability).

900 TB archival storage: use Amazon S3 Glacier for cost-effective long-term archival.

Why the other options aren’t suitable:

A: Uses EBS for the 10 TB high-I/O tier. While EBS can be fast, it’s typically more costly and doesn’t leverage the raw throughput of instance storage for bursty video processing, and doesn’t split the workload as cleanly as D.

B: Recommends EFS for the durable 300 TB. EFS is durable but not as cost-optimized as S3 for very large, long-tail archival or large-scale media workloads.

C: Uses EC2 instance store for max I/O (okay) but pairs it with non-Glacier archival storage, which isn’t ideal for long-term archival at scale.

Belgrade, Serbia

AI Explanation - verified by tjgalti on: July 05, 2026
Question 30:

Correct concept: Use a packet-filter to block traffic from the offending IP to the configuration utility, without impacting other users.

Why D (Packet Filter) is appropriate:

- Packet filters can block traffic based on source IP, destination port, and protocol. - You can drop only the admin/configuration access path (e.g., management port on the Self IP) for that one IP, leaving all other admin/users untouched.

Why not the others:

- SSH: Not targeted to the config utility specifically and would affect SSH access broadly. - IP allow list: Forcing an allow-list would restrict access to many legitimate admins and is not scalable for just one bad IP. - Port lockdown: Global port control, not IP-specific; could disrupt legitimate admin traffic. - Device trust: Not a mechanism for blocking by source IP.

Quick approach (conceptual):

- Identify the unwanted source IP. - Create a Packet Filter that matches src IP = bad IP (and the management port/protocol) and set action to drop. - Attach/apply it so only management traffic from that IP is blocked, preserving access for others.
Thalwil, Switzerland

AI Explanation - verified by User5696 on: July 08, 2026
Question 9:
Here’s a focused explanation of Question 9.
What the question asks

You need to assign Fabric workspace roles to two groups:

- ResearchReviewersGroup1 must read lakehouse and warehouse data and shortcuts by using SQL endpoints. - ResearchReviewersGroup2 must read lakehouse data by using Lakehouse Explorer.
Key concepts

Fabric lakehouse workspace roles: Admin, Member, Contributor, Viewer.

SQL endpoints are used for programmatic data access (queries) against lakehouse data.

Lakehouse Explorer is the UI for browsing lakehouse data.

Why the mapping matters

SQL endpoints access (group 1): To run SQL queries against lakehouse/warehouse data, you generally need a role that allows data querying beyond just viewing UI. In practice, that means Contributor or higher (Admin/Member also have broad rights; Viewer is typically limited to reading data via SQL analytics in tables, not full lakehouse/query capabilities).

Lakehouse Explorer access (group 2): To view data in the Lakehouse Explorer UI, a Viewer level access is usually sufficient; you don’t need write permissions.

What the page shows vs. likely correct mapping

The page’s answer key shows:

- Group1 = Viewer - Group2 = Contributor

This is likely incorrect for group 1, because reading lakehouse data via SQL endpoints typically requires Contributor or higher, not just Viewer. Group 2 would more likely be Viewer (to read data in the Lakehouse Explorer UI) rather than Contributor.

Recommended mapping based on requirements

ResearchReviewersGroup1: Contributor (or higher) so they can read lakehouse/wa
Bengaluru, India

AI Explanation - verified by surajnaidu9999 on: July 21, 2026
Question 1:
Answer: D (Reconnaissance and Initial Access)

Phishing can map to two MITRE ATT&CK tactics depending on the attacker’s objective.

- Reconnaissance: “Phishing for information” is a sub-technique used to elicit sensitive data for targeting. - Initial Access: Phishing can also be used to gain a foothold by delivering malicious payloads/executing code.

Therefore, phishing isn’t confined to a single tactic; it can serve both Reconnaissance and Initial Access, which is why option D (Reconnaissance, Initial Access) is correct.

Mumbai, India

AI Explanation - verified by rathore_rajendra15 on: July 05, 2026
Question 89:
Question 89 asks for best practices to grow the subscriber list via social channels and a mobile app (choose 2). The correct answers are A and B.

A: Provide an opt-in checkbox on the mobile app registration form.

- Why: It ensures explicit, permission-based sign-up at the point of registration, reducing risk and aligning with anti-spam rules.

B: Promote content on social channels that requests an email address.

- Why: Content offers (gated content, newsletters, webinars) attract users to opt in with their email, expanding the list in a compliant way.
Why not C or D:

C: Search Facebook fans’ profiles for email addresses — violates privacy and platform policies; not a legitimate opt-in method.

D: Send unsolicited requests on Twitter to sign up — spammy, discouraged, and could harm deliverability and brand trust.

In short: use explicit opt-ins (A) and value-driven sign-up offers on social channels (B).
Pune, India

AI Explanation - verified by User6160 on: July 26, 2026
Question 43:
Question 43 asks which activity is part of the "continual improvement" practice.

Answer: D: Making business cases for improvement action

Why:

Continual Improvement focuses on identifying and planning improvements and ensuring they’re funded and prioritized. Creating a business case for an improvement action is part of justifying and obtaining support/resources to implement improvements.

A (Identifying the cause of incidents) aligns with Problem Management.

B (Authorizing changes) aligns with Change Enablement.

C (Logging/managing incidents that result in improvement opportunities) aligns with Incident Management, not Continual Improvement.

Brasília, Brazil

AI Explanation - verified by sophielargeaudproust on: July 25, 2026
Question 50:
Question 50 asks which item is NOT required for high-risk AI systems under the EU AI Act.
Answer: D (Publishing a detailed report on the training data used).
Why:

The Act requires:

- Conformity assessment before placing a high-risk AI system on the market. - Post-market monitoring to track performance and safety after deployment. - Robust data governance/documentation around the data used, including training data, to support risk management and transparency.

It does not, as a public obligation, mandate publishing a detailed report on the training data used.

Also, the Act does not specify a fixed “six months” retention for system logs in a way that would clearly make A required; logs for traceability are implied, but the six-month period is not a defined, universal requirement.

If you’d like, I can walk through how these requirements map to specific articles or provide a quick checklist to compare high-risk vs. other risk classes.
Montélimar, France

AI Explanation - verified by User8491 on: July 27, 2026
Question 26:
Question 26 explanation:

Correct answer: All four statements are true (A, B, C, and D). The given key (A,B) is likely incorrect.

Why each statement is true:

A) Customers can change the size of the Warehouse after creation — Yes. You can resize a virtual warehouse after it’s created using ALTER WAREHOUSE ... SET WAREHOUSE_SIZE.

B) A Warehouse can be resized while running — Yes. Snowflake supports online resizing; you can change the size without stopping queries.

C) A Warehouse can be configured to suspend after a period of inactivity — Yes. You can enable auto-suspend with a delay (AUTO_SUSPEND).

D) A Warehouse can be configured to auto-resume when new queries are submitted — Yes. You can enable auto-resume (AUTO_RESUME) so a suspended warehouse automatically resumes on new queries.

Quick notes:

Example commands:

- Resize: ALTER WAREHOUSE my_wh SET WAREHOUSE_SIZE = 'XL'; - Auto-suspend: ALTER WAREHOUSE my_wh SET AUTO_SUSPEND = 300; - Auto-resume: ALTER WAREHOUSE my_wh SET AUTO_RESUME = TRUE;

Even if a warehouse is resizing or auto-suspending, queries will be queued and then executed once the warehouse has the appropriate capacity.

Hyderabad, India

AI Explanation - verified by User9085 on: July 21, 2026
Question 18:
Question 18 asks which foundation model type is best for a search app that handles text and image queries. Correct answer: A) Multi-modal embedding model.

Why: A multi-modal embedding model maps both text and images into a shared vector space, enabling cross-modal similarity and retrieval (e.g., find images matching a text query or text matching an image).

What it does: Enables efficient similarity search using a vector database or nearest-neighbor indexing.

Why the other options aren’t suitable:

- Text embedding model handles only text, not images. - Multi-modal generation model generates content, not primarily for retrieval. - Image generation model creates images, not for embedding-based search.

Quick implementation note: you’d typically pair the embeddings with a vector store (e.g., ANN index) and possibly fine-tune on domain data for better alignment across modalities.

Kwai Chung, Hong Kong

AI Explanation - verified by User8251 on: August 03, 2026
Question 6:
The function you should use is Table.Profile (Power Query M).

Why: Table.Profile returns a per-column profile that includes statistics such as count, null count, distinct count, and standard deviation. It also provides min/max and average where applicable, which matches the requested metrics (Count, Average, Null count, Distinct count, Standard deviation).

Syntax: Table.Profile(table as table, optional additionalAggregates as nullable list) as table

How it helps: After running Table.Profile on your table, you can extract the per-column stats you need and display them in your semantic model or report.

Other options shown (Table.Schema, Table.View, Table.FuzzyGroup) do not provide the full column profiling statistics you need.
Bengaluru, India

AI Explanation - verified by User6887 on: July 21, 2026
Question 32:
The correct answer is global unicast (D).

Global Unicast: These are the IPv6 addresses that are globally routable on the Internet. They’re allocated by Regional Internet Registries (RIRs) and can be reached from anywhere with proper routing (similar to IPv4 public addresses). Example ranges include 2000::/3.

Link-local: fe80::/10. Used only on the local link; not routable beyond the directly connected network.

Unique Local Addresses (ULA): fc00::/7. Private addresses for internal use within an organization; not publicly routable on the Internet (like IPv4 private addresses).

Multicast: ff00::/8. One-to-many addresses used for group communication, not unicast routing.

Thiruvananthapuram, India

AI Explanation - verified by User2211 on: July 14, 2026
Question 6:

Answer: The correct first step is to define a new SOC role for Company A in Google SecOps.

Why this is right:

- It uses role-based access control to enforce data boundaries: Company A’s analysts can only access case data originating from Company A’s telemetry. - It allows reuse of existing playbooks: once the appropriate role is in place, you can grant access to the same playbooks without recreating them. - It minimizes effort: no need to stand up a new tenant/environment or manage separate identities beyond the Company A group.

Why the other options are less suitable as the first step:

- Acquire a second SecOps SOAR tenant: heavy, adds duplication and management overhead; not needed initially. - Provision a new service account for Company A: insufficient for isolating case data or enforcing cross-tenant boundaries. - Create a Google SecOps SOAR environment for Company A: unnecessary if you can achieve isolation and reuse via RBAC.

Practical note:

- Implement the new SOC role and attach it to Company A’s user group in your identity provider. - Verify data separation by testing access to a mix of Company A vs. another company’s cases, and confirm playbooks can be run by the new role.
Bengaluru, India

AI Explanation - verified by User4826 on: July 07, 2026
Question 493:

Answer: C — Authenticate-Nak

Explanation:

- In PPP authentication (PAP or CHAP), when the authenticatee provides incorrect credentials, the authenticator responds with a negative acknowledgment. - For PAP, the relevant negative response is Authenticate-Nak. This indicates authentication failure. - The other options are not used for this failure case: Authenticate-Ack means success, Authenticate-Reject is not the standard PPP response for bad credentials, and Authenticate-Reply is not a typical PPP message.
Pretoria, South Africa

AI Explanation - verified by User5852 on: July 26, 2026
Question 5:
No—the solution does not meet the goal.
Explanation:

Transact-SQL (T-SQL) is used to query relational data in Azure SQL Database, not telemetry data from monitoring services.

To analyze monitoring data from Azure SQL Database Intelligent Insights and Azure Application Insights, you should use the Kusto Query Language (KQL) in Azure Monitor Logs/Log Analytics (and in Application Insights Analytics).

Using KQL lets you query telemetry tables such as requests, dependencies, pageViews, and customEvents (from App Insights) and any integrated monitoring data you’ve ingested into Log Analytics.

What to do:

Ensure Intelligent Insights and Application Insights data is available in a Log Analytics workspace or accessible via Application Insights Analytics.

Go to Azure Monitor > Logs (or Application Insights > Analytics) and write KQL queries, e.g.:

- requests | where timestamp > ago(7d) | summarize avg(duration) by bin(timestamp, 1h) - Combine data sources with union if needed.
Key takeaway: use KQL for ad-hoc monitoring queries, not T-SQL.
Bengaluru, India

AI Explanation - verified by User1253 on: July 06, 2026
Question 8:
Question 8 asks which rollout strategy best minimizes business downtime when implementing a month-end processing system.
Key options:

Cutover (big bang): switch from old to new in one go; typically causes significant downtime during the switch.

Phased: roll out in stages; downtime is reduced per phase but the total deployment may take longer and complicates integration.

Pilot: deploy to a limited area first; reduces risk but not necessarily the widest downtime impact.

Parallel: run old and new systems side by side for a period; downtime is minimized because business operations can continue on the old system while the new is tested and reconciled.

Why Parallel is best here:

It allows continuous operation during the transition (no single cutover downtime).

Problems can be resolved without halting business processes.

Data reconciliation can occur while both systems run.

Trade-offs: higher cost and effort to maintain two systems temporarily.
Answer: D: Parallel.
Kolkata, India

AI Explanation - verified by User9288 on: July 07, 2026
tell me more about parallel output
It sounds like you meant "parallel processing" from Question 109. Here’s more about that concept:

What it is: Running multiple tasks at the same time to increase throughput and utilization of resources (CPU, memory, I/O). This is common in multi-core systems and distributed environments.

In testing terms: Parallel processing tests how many operations can be completed concurrently and how system performance scales under load. It helps identify bottlenecks and optimize throughput.

Why it’s not a resiliency test: It doesn’t validate continuity during a failure (like power loss or site failover). It focuses on performance under concurrent load, not on staying online during outages.

When to use: Capacity planning, performance testing, and optimization of applications that handle many simultaneous users or requests.

Potential pitfalls:

- Diminishing returns due to Amdahl's Law and synchronization overhead. - Resource contention (CPU, RAM, disk I/O) and race conditions. - Misinterpreting throughput gains without considering latency.

How to measure:

- Metrics: throughput (requests/sec or transactions/sec), latency (p50/p90/p99), resource utilization. - Methods: load generators, multi-threaded clients, concurrent sessions, and performance dashboards.

Quick exam tip: Differentiate between parallel processing (performance/throughput) and resiliency
Lagos, Nigeria

AI Explanation - verified by User9999 on: July 04, 2026
Question 24:
Question 24 asks: A LTM device needs to load balance active and passive FTP traffic while using only a single virtual server. Which virtual server type should be configured?

Correct answer (per the key): Forwarding (IP) [option E].

Why this works:

FTP uses dynamic data ports and has two modes:

- Active: server connects back to the client for the data channel. - Passive: client connects to the server for the data channel.

A non-terminating, IP-forwarding virtual server (Forwarding (IP)) simply passes traffic to the pool members without terminating the TCP session. This avoids the complexities of FTP port range translation and protocol handling inside the LTM, allowing both active and passive connections to be established through a single VIP.

In contrast, a Standard virtual server terminates the connection and would require FTP protocol handling (FTP profiles) and can complicate single-VIP support for both modes.

In short: Forwarding (IP) preserves end-to-end FTP behavior for both active and passive modes using one virtual server.
Thalwil, Switzerland

AI Explanation - verified by User1075 on: July 20, 2026
Which of the following is an advantage of using VDI? Authentication is not required on a domain. Licensing costs are minimized. Less manual configuration is needed for each workstation. A virus is automatically contained locally.
C. Less manual configuration is needed for each workstation.
Explanation: In a VDI environment, desktops run from centralized images on the server. Updates to the base image apply to all virtual desktops, reducing per-workstation configuration. The other options are not reliable advantages of VDI: authentication still occurs on a domain, licensing can be complex/not minimized, and viruses aren’t automatically contained locally.
Indpls, United States

AI Explanation - verified by User8155 on: July 23, 2026
ok, it is a way to define user type of datatypes?
Tak — domena (DOMAIN) to sposób na zdefiniowanie user-defined typu danych, który opiera sie na istniejacym bazowym typie i narzuca na niego ograniczenia (constraints) oraz domyslna wartosc.
Co to oznacza:

Domeny tworza restrykcjony razem z typem. Wykorzystujesz je w kolumnach, aby miec spójna walidacje danych w wielu miejscach.

To nie jest pelny niestandardowy typ z wlasnym input/output funkcjonowaniem. Aby stworzyc typ z wlasnym I/O i operacjami, uzylbys CREATE TYPE (lub rozszerzen w C). Domeny to uproszczona forma ograniczen na istniejacy typ.

Przyklad:

CREATE DOMAIN positive_int AS integer NOT NULL CHECK (VALUE > 0);

CREATE TABLE orders (id serial, qty positive_int);

Zalety domen:

latwo wymuszaja wspólne reguly dla wielu kolumn/naglówków,

zmiana regul w jednym miejscu (domena) automatycznie wplywa na wszystkie kolumny ja uzywajace.

Warsaw, Poland

AI Explanation - verified by User5264 on: July 19, 2026
Question 5:
Question 5 is asking which Data view options you need to identify the min and max values for each column in the Dataflow results.
Key ideas:

To get min/max per column, you need column profiling. That’s provided by enabling the column profile.

To actually see those min/max values, you should show the column profile in the details pane, and you also need the details pane itself enabled so you can view it.

Recommended selections:

Enable column profile (B)

Show column profile in details pane (C)

Enable details pane (E)

Why not the others?

Show column value distribution (D) shows distribution shape but isn’t required to get min/max.

Show column quality details (D) deals with data quality metrics, not min/max.

Note: The provided key on the page lists B and E, but to view min/max in the UI, you typically need all three: B, C, and E. If your exam system shows a different combination, the concept is still: enable profiling, display it in the details pane, and ensure the details pane is visible.
Copenhagen, Denmark

AI Explanation - verified by User4762 on: July 06, 2026
In italian
Ecco la logica della Domanda 1, in italiano, con le scelte di storage mode:

Box 1: Cliente ? Dual: Dual permette di servire i dati dalla cache quando possibile o eseguire query on-demand sull’origine dati. Poiché Customer deve essere aggiornato quotidianamente, vuoi visuali rapide (cache) ma anche dati freschi se necessario.

Box 2: Dimensioni (Customer, Geography, Date) ? Dual: Usare Dual sulle tabelle dimensionali principali riduce le relazioni limitate e migliora le prestazioni, pur consentendo query dirette quando serve freschezza.

Box 3: Vendite ? DirectQuery: DirectQuery non è cached; le query vanno direttamente al data source, garantendo dati quasi in tempo reale.

Box 4: SalesAggregate ? Import: Import mantiene i dati in cache e supporta un refresh settimanale, ottimizzando le visualizzazioni.

Riassunto: Dual per le dimensioni, DirectQuery per i fatti quasi real-time, Import per l’aggregato settimanale per prestazioni migliori. Nota: mescolare le modalità può influire su prestazioni e supporto delle funzionalità.
Genoa, Italy

AI Explanation - verified by User2066 on: July 12, 2026
Question 6:
Question 6 asks how to diagnose why opportunities are taking longer to close.

A) Dashboard of month-over-month trend of lead conversions: Not directly about closing time. It shows lead-to-opportunity conversion trends, not the cycle time of opportunities.

B) Report on campaign ROI: Marketing effectiveness, not internal sales cycle length.

C) Report on the discount approval time for quotes: Helps show if slow discount approvals are delaying quotes and closes.

D) Dashboard of opportunity stage duration: Reveals how long opportunities stay in each stage, identifying bottlenecks in the sales process.

Therefore, the two tools to leverage are C and D. They together pinpoint where delays occur (specific stages) and whether approval workflows (like discounts) are causing longer close times.
City Of Muntinlupa, Philippines

AI Explanation - verified by User8751 on: August 03, 2026
Question 15:
Correct answer: B) Side channel attack
Why:

Alice is co-resident on the same physical host and exploits shared hardware (the processor cache) to infer secrets. This is the classic definition of a side-channel attack—information leakage through implementation details (like timing or cache behavior) rather than by breaking a protocol or injecting code.

How it works (conceptual):

Observing cache timing or access patterns to deduce cryptographic keys or plaintext data from the victim VM.

Why not the others:

Man-in-the-cloud attack: targets cloud trust/auth, not local hardware sharing.

SQL injection: exploits input to run SQL commands, not a VM/caching vector.

Service hijacking: takes control of a service, not about covert data leakage via shared hardware.

Exam tip:

Notice phrases like “shared hardware resources,” “co-resident,” or “cache”—these indicate a side-channel vector.

Tamarac, United States

AI Explanation - verified by User4468 on: July 26, 2026
Question 12:
The correct answer is B: RACI.

Why: After listing all resources, you need to assign who is responsible for each task. A RACI chart (Responsible, Accountable, Consulted, Informed) documents these roles for every activity.

What RACI means:

- Responsible: the person(s) who actually perform the task. - Accountable: the person who owns the task and signs off. - Consulted: those who provide input (two-way communication). - Informed: those who are kept up-to-date (one-way communication).

Why the others aren’t suitable here:

- RFI (Request for Information) is for gathering information, not assigning responsibilities. - WBS (Work Breakdown Structure) defines deliverables and tasks, not who does them. - SOW (Statement of Work) describes the work to be done, not internal task ownership.

Quick example: Task "Create user authentication module" — Responsible: Developer, Accountable: Tech Lead, Consulted: Security Architect, Informed: PM.

Using a RACI matrix clarifies ownership, reduces gaps, and improves communication in project execution.
Seattle, United States

AI Explanation - verified by User8917 on: July 15, 2026
Question 32:
Question 32 answer: Session scope variable.
Why:

The user needs the chosen occasion to remain available as they navigate through the current shopping experience. Session scope stores data for the duration of the user’s session.

Request scope data is cleared with each HTTP request; Page scope only lasts for rendering a single page; Content slots are for page/content presentation, not user data.

Since you don’t want to persist the selection in system/custom objects, session scope is the right level: it preserves state across pages during the same session but isn’t stored long-term.

Dahegam, India

AI Explanation - verified by User5015 on: July 22, 2026
Question 10:
Question 10 asks if migrating all VMs to an Azure pay-as-you-go subscription uses the “elastic expenditure model.”
Here’s the right way to think about it:

In Azure, the typical cost approach for pay-as-you-go VMs is an Operational Expenditure (OPEX) model. You’re billed for actual usage each month.

The term “elastic expenditure model” isn’t a standard Azure cost category. Elasticity describes scaling capacity, not the billing category itself.

So recommending the elastic expenditure model is not correct for this goal.

Conclusion:

The solution does not meet the goal. Answer: No (B).

Why this matters:

Pay-as-you-go aligns with OPEX because costs vary with usage.

Elasticity is about scaling resources, which affects performance and capacity, not the fundamental cost model.

If you want, I can compare this with the other questions in this set (11 and 12) to highlight how the correct expenditure models differ in each scenario.
San Antonio, United States

AI Explanation - verified by User9198 on: July 28, 2026
Question 98:
Question 98: A company wants to grant users in one AWS account access to resources in another AWS account. Which AWS service will meet this requirement?
Answer: B. IAM role
Explanation:

Cross-account access is typically implemented with an IAM role. You create a role in the target account (where the resources live) and configure a trust policy that allows principals from the source account to assume that role.

Users in the source account then assume the role (via Switch Role in the console or STS:AssumeRole) and receive temporary credentials with the role’s permissions to access the resources.

Why the other options aren’t correct:

IAM group: Groups exist inside a single account; they don’t grant cross-account access.

IAM tag: Tags are metadata and do not grant access.

IAM Access Analyzer: It analyzes and identifies public or cross-account access but does not grant access itself.

If you’d like, I can outline the steps to set up a cross-account role.
Busan, South Korea

AI Explanation - verified by User7799 on: July 20, 2026
Question 18:
Answer: D

What D means: In Security Command Center (SCC), a posture combines both preventative controls (predefined and custom organization policies) and detective controls (predefined and custom Security Health Analytics [SHA] modules). Scope this posture to the business unit folder to enforce those controls across the Vertex AI environment.

Why this is correct: You need both preventative guardrails (policies) and detective guardrails (SHA findings) to meet internal security requirements. A posture provides a unified, scalable way to apply and monitor these controls to a specific organizational unit.

Why the other options are weaker:

- A: Assured Workloads focuses on regulatory compliance and data handling, but does not explicitly provide the combined preventative+detective posture for ongoing SCC monitoring. - B: Only adds policies (preventative) without integrating detective SHA modules for ongoing findings. - C: Rego + Workload Manager is not the standard, integrated SCC posture approach and adds complexity without the centralized, unified governance of a SCC posture.

If you want, I can break down the exact components of a SCC posture and how to apply it to a Vertex AI project.

Bengaluru, India

AI Explanation - verified by tjgalti on: July 05, 2026
Question 29:

Key concept: The LTM has an SSL Transactions Per Second (TPS) license limit. Any TLS transactions beyond that limit in a given second are dropped (silently).

Given:

- TLS TPS license limit: 500 - New TLS transactions attempted: 2560 per second

Calculation:

- Accepted: 500 - Discarded: 2560 - 500 = 2060

Correct option: “2060 new TLS transactions will be silently discarded due to the SSL TPS license limit.”

Note: The exam page lists the first option (560 discarded) as the answer, but that is incorrect based on the 500 TPS limit and 2560 attempts.

Thalwil, Switzerland

AI Explanation - verified by User9392 on: July 05, 2026
Question 23:
Question 23 explanation

Correct answer: A

Why this works:

- To see revenue by marketing campaign, use a standard Campaign report type that includes related Opportunities (Campaigns with Opportunities). This lets you pull Opportunity fields like Amount and filter to won opportunities. - By filtering for Won Opportunities, you attribute only actual revenue to each campaign, and you can sum the Opportunity Amounts grouped by Campaign.

Why the other options aren’t suitable:

- B: Periodic data jobs aren’t needed when you can report on live data from the Campaigns with Opportunities report type. - C: Roll-up summary fields require a Master-Detail relationship. Opportunities relate to Campaigns via a lookup, so you can’t create a roll-up from Opportunity to Campaign out-of-the-box. - D: A custom Total Value field with a workflow would require cross-object summing and isn’t feasible with standard automation on a lookup relationship without additional tools.

Quick steps to implement:

- Use the report type: "Campaigns with Opportunities." - Add columns: Campaign Name, Opportunity Amount. - Add a filter: Opportunity Stage = Closed Won. - Group by Campaign and summarize Amount to see revenue per campaign.
Edison, United States

AI Explanation - verified by bmccloskey on: July 27, 2026
Question 17:
Question 17 asks which conditions will prevent an OSPF adjacency from reaching the Full state. The three correct options are A, B, and D.

A) MTU mismatch: OSPF neighbors must exchange Hello packets with a compatible MTU. If MTUs differ, the neighbor conversation fails and the adjacency cannot become Full.

B) Incorrect subnet mask: Routers must be in the same IP subnet on the connected link to form a neighbor relationship. A subnet mismatch prevents Hello packets from being considered valid on the same network.

D) Area ID not the same: Neighbors must share the same Area ID. A mismatch stops adjacency from forming beyond the 2-Way state.

Why the others aren’t correct (in this context):

E) Different metric set on each end of the link: Cost differences do not prevent OSPF adjacency; they affect routing decisions, not neighbor formation.

F) Router ID not defined: OSPF can auto-choose a router ID; an undefined ID is not a prerequisite for adjacency to reach Full.

C is sometimes a consideration (if the interface isn’t running OSPF at all), but the official key lists A, B, D as the three factors.
Hilo, United States

AI Explanation - verified by User5969 on: July 12, 2026
Question 2:
Question 2 hinges on what you need to enable Einstein recommendations on a website during checkout.

Correct choices: Recommendation Code and Conversion/Cart Code (options B and C).

Why:

- Recommendation Code is used to render Einstein’s product recommendations on the storefront. - Conversion/Cart Code tracks cart and checkout activity, helping Einstein learn from customer behavior and improve future recommendations.

Why the others aren’t correct:

- Collect Code isn’t related to enabling on-site recommendations. - Email Conversion Code applies to email tracking, not on-site checkout recommendations.
Hyderabad, India

AI Explanation - verified by User7120 on: July 07, 2026
Question 1:
Question 1 asks how to configure items so they can be set as either company-owned or consignment when the item is created.
What the options mean and why they matter:

Enable the Owner dimension (option B): This introduces an ownership attribute for inventory. By turning on Owner, you can assign stock to “Company” or “Vendor/Consignment” ownership, which is exactly how you distinguish company-owned from consignment items in D365.

Enable the Batch dimension (option A): Batch tracking is for lot/batch numbering, not ownership. It doesn’t help you model ownership (consignment vs. company-owned), so it’s not required for this objective.

Costing model choices (options C and D): The costing method (e.g., Moving average vs. Standard costing) is a separate setting from ownership. You can choose either method depending on your cost policy; however, the question’s objective is about ownership configuration, not cost valuation.

Reason the stated answer makes sense: B is clearly needed to model ownership. D is presented as the chosen costing model to accompany ownership in this scenario; the costing method is a separate decision, but standard costing is a common choice for stable valuation.
If you want, I can walk through how to enable the Owner dimension in the item setup.
Chennai, India

AI Tutor 👋 I’m here to help!

IBM C1000-136 Exam Actual Questions IBM Cloud Pak for Data v4.x Solution Architecture (Page 6 )

QUESTION: 1

QUESTION: 2

QUESTION: 3

Explanation:

QUESTION: 4

QUESTION: 5

Explanation:

IBM C1000-136 Exam Actual Questions
IBM Cloud Pak for Data v4.x Solution Architecture (Page 6 )