IIA IIA-CIA-Part3 Exam Prep
Certified Internal Auditor - Part 3, Business Analysis and Information Technology (Page 116 )

• IPv6 address types you’ll typically see:

• Unique Local Addresses (ULAs)

• If an address begins with fdXX:… or fc00:…, place it under “Unique Local Address” (ULA).
• If it begins with 2000::/3, place it under “Global Unicast.”
• If it begins with fe80::, place it under “Link-local.”
• If it begins with ff00::, place it under “Multicast.”

1. Remote access to a Windows PC
2. Full chat and optional game-console functions

• Windows Remote Desktop (RDP) uses TCP 3389. The router needs a port-forwarding rule that sends incoming traffic on that port to the Windows PC’s internal IP address.
• The game console should connect through the wireless AP. Using WPA2-PSK provides the required wireless security while allowing normal online, chat, and optional services.
• The firewall should separate the internal network from the screened subnet. Its screened-subnet-side address is shown as 10.100.0.1.
• Devices must be placed in the correct network locations: the PC behind the router, the console on the wireless AP, and the firewall between the appropriate network segments.

• Strongest encryption algorithms: Choose the strongest available encryption and integrity options, typically AES with the largest key size and a secure integrity algorithm.
• Encrypt all traffic: Select tunnel mode rather than transport mode. Tunnel mode encrypts the entire original IP packet, which is appropriate for a site-to-site VPN between branch networks.
• Secret-password authentication: Configure a pre-shared key (PSK) on both VPN concentrators. The key must match at both ends.

• What wipe does: A factory reset that erases all data, apps, and settings and returns the device to the OOBE. It removes the device from management and resets identity.
• Why not for this scenario: The goal is to repurpose the same device to a new user with Autopilot. Autopilot Reset keeps the device’s Azure AD/Intune identity and re-provisions the device for the next user without a full wipe.
• What Autopilot Reset does: Removes user data and apps but preserves device identity and management connection, then reapplies the Autopilot provisioning for the next user.
• When you’d use wipe instead: If you’re selling or permanently discarding the device, or you truly want to scrub all traces and start fresh without re-enrolling.

• Forecasting lets sales leaders predict revenue for upcoming fiscal periods, compare forecasts with targets, and review performance by salesperson or team.
• Opportunity Stages help determine the likelihood that opportunities will close. Each stage can have a probability, which contributes to forecast calculations.

• Sales Quotes: Used to present pricing or product proposals to customers; they do not provide revenue forecasting.
• Opportunity List View: Helps users filter and view opportunities, but it is not the forecasting tool.

• What the dataflow options mean:

• Why C fits best:

• Equipment and hardware
• Facilities
• Inventory
• Backup media
• Supplies stored at an alternate or remote location

• Personal belongings of staff: Usually not organizational assets.
• DR line-item revenues: Revenue is a financial impact, not a physical asset.
• Cloud-based applications: These are primarily logical or information-processing assets, even though they depend on physical infrastructure.

• Answer: D. Select an IdP

• Why: To reduce the number of credentials across multiple SaaS apps, implement a single sign-on approach via an Identity Provider. The first step is choosing the IdP; once selected, you can enable SAML (A) or OAuth as supported by apps. Password vaulting (C) is not a true SSO solution, and B is not the foundational step.

• The correct permission is Manage Sandboxes (the official Salesforce name; the option in the list is written as “Manage Sandbox,” which is effectively the same idea but the canonical name uses the plural).
• Why: Sandboxes are a lifecycle feature. Only users with the explicit Manage Sandboxes permission can perform create, delete, refresh, or activate actions.
• Why the other options aren’t correct:

• State is stored remotely in Terraform Cloud/Enterprise, not as a local file.
• Terraform runs (plan/apply) can be executed on remote infrastructure, with results visible in the remote workspace UI.
• Supports workspace-based organization, state locking, and concurrency control.
• Useful for team collaboration, centralized governance, and auditable logs.

• In your configuration, you use a backend block like backend "remote" { ... }.
• You still run terraform init to configure/migrate to the remote backend.
• After setup, terraform plan/terraform apply may be executed remotely, and the outputs/logs appear in the Terraform Cloud/Enterprise UI rather than (only) in your local terminal.

• Other backends store state remotely but typically do not provide remote execution; with the remote backend you get remote runs and a collaborative UI, not just remote state storage.

• Topic: Conditional Access (CA) policy and MFA for Azure management.
• Policy name: Policy1, created with the template “Require multifactor authentication for Azure management.”
• What the template does: It enforces MFA when signing in to manage Azure resources (Azure management) for the users included in the policy.
• Who is included: The question lists Admin1, Admin2, Admin3, and Admin4 as the admins in the tenant. The template’s default scope for this scenario is to apply to those admin accounts (i.e., all four admins unless you explicitly limit the scope).

• CA policy for “Azure management” targets admin sign-ins.
• If the policy includes Admin1–Admin4, all of them must use MFA on their next sign-in (choice D).

• Quick context: In a three-tier network (Access, Distribution, Core), roles are:

• Why A is correct: The Distribution layer runs Layer 2 and Layer 3 technologies. It often handles VLAN access (L2) and can perform inter-VLAN routing or connect to the core (L3). So it makes sense for the distribution layer to support both L2 and L3.

• Why B is correct: The Core layer is designed to maintain continuous connectivity when devices fail. It is built for high availability and redundancy, providing multiple paths so the network remains reachable even if some components fail.

• Why the others are not correct:

• Customers access the portal without needing a full Dynamics 365 license.
• They submit case information through portal forms.
• The submitted data is stored in Dataverse tables, such as the Case table.
• Security is controlled using web roles and table permissions, so customers can access only appropriate records.

• Dynamics 365 Connector — connects apps to Dynamics 365 data but is not the portal’s underlying data platform.
• Microsoft SharePoint — useful for documents and collaboration, not the standard case-management data source for portals.
• Microsoft Azure Storage — stores files or other data, but is not the native portal business-data platform.

• Question 142: Security governance is MOST associated with which IT infrastructure component? Network / Application / Platform / Process
• Answer: D. Process

• Security governance is about how decisions are made, accountability, and oversight to ensure security objectives align with business goals. These are implemented through governance processes (policy development, risk management, assurance, monitoring, escalation, etc.).
• The other options (Network, Application, Platform) are concrete IT components; governance affects them, but it’s exercised primarily through the processes that govern how those components are managed and controlled.

• In governance-related questions, focus on the decision-making, accountability, and control processes rather than the underlying technology components.

• The VPN gateway is in VirtualNetworkA.
• Gateway transit is configured on the peering associated with the VNet that contains the gateway—here, VirtualNetworkA.
• A peered VNet may use the remote gateway through the appropriate peering option, but this does not automatically update an existing P2S client’s routes.
• The Windows 10 workstation’s P2S VPN client package was created before VirtualNetworkB was peered, so it may not have a route for VirtualNetworkB.

• The 99.99% availability SLA for VMs is achieved when you run VMs across two or more Availability Zones.
• Two VMs in a single Availability Zone do not meet the 99.99% target (their SLA is lower, e.g., around 99.95% or less depending on configuration).

• Deploy at least two VMs across two different Availability Zones (one VM in each zone, or both in two zones with a load balancer).
• This provides the required zone redundancy and the 99.99% SLA.

• Correct answer: C. AWS CloudFormation

• Why: CloudFormation lets you define infrastructure as code via templates (JSON or YAML). You can create a single template that describes multiple AWS resources and reuse it to deploy consistent stacks across environments. Templates can be parameterized and stored for repeated deployments. Other options (Marketplace, AMI, OpsWorks) don’t provide reusable deployment templates in the same way.

• What the goal is: You want to add guest (external) users to your Azure AD tenant contoso.com, one entry per external user in a CSV.

• The proposed solution uses New-AzureADUser for each external user. Why this isn’t correct: New-AzureADUser creates a regular (internal) user in your directory. It does not create a guest/B2B user invite. So you’d end up with 500 ordinary accounts, not guest accounts with external access.

• The correct approach: Use New-AzureADMSInvitation for each external user. This invites the external user to your directory and creates a guest user (a B2B collaboration user) in your tenant. The invited user then accepts the invitation and gains access as a guest.

• Azure AD vs directory/tenant: Azure AD is the cloud identity service. A directory (also called a tenant) is your specific instance of that service (contoso.com in your scenario). The terms are often used interchangeably in exams.
• Guest user vs internal user: A guest user is external to your organization; an internal user is created directly in your directory as a normal employee/user account.
• B2B invitation: The process of inviting external users so they can collaborate in your resources; New-AzureADMSInvitation is designed for this.

• Recovery procedures actually work
• Recovery time and recovery point objectives can be met
• Staff understand their responsibilities
• Contact details, dependencies, and technical configurations are accurate
• Gaps or conflicts exist in the plan

• Not version-controlled: Creates a risk of using an outdated copy, but the plan might still be effective.
• Contact information needs updating: This is a specific weakness that can be corrected, often identified during testing.
• Not approved by senior management: Approval is important for authority and resource commitment, but an untested plan presents the most direct risk that recovery will fail when needed.

• The Balanced Scorecard translates an organization’s vision and strategy into a set of concrete objectives and metrics across four perspectives (financial, customer, internal processes, learning & growth). This framework explicitly links IT goals to business goals and provides a way to measure and monitor alignment over time.

• Enterprise architecture (EA): Great for governance, standards, and roadmaps to ensure IT assets support business needs, but it’s more about structure and alignment at design time rather than directly measuring ongoing alignment of goals.
• KPIs: Useful metrics, but they don’t by themselves provide a full framework to ensure IT goals are aligned with organizational strategy.
• Enterprise dashboard: A visualization tool for metrics; it helps report status but doesn’t inherently establish or assess alignment.

• A) You can only apply a single template BOM to a service object.

• C) You can modify or delete lines in a BOM template regardless of whether the template has been associated to a service object, or not.

• B) You can apply many template BOMs to a service object — false; typically only one template per service object.
• D) You can modify/delete lines only if not associated — false; you can modify templates even after association (per C).

• Correct answer: All four statements are true (A, B, C, and D). The given key (A,B) is likely incorrect.

• A) Customers can change the size of the Warehouse after creation — Yes. You can resize a virtual warehouse after it’s created using ALTER WAREHOUSE ... SET WAREHOUSE_SIZE.
• B) A Warehouse can be resized while running — Yes. Snowflake supports online resizing; you can change the size without stopping queries.
• C) A Warehouse can be configured to suspend after a period of inactivity — Yes. You can enable auto-suspend with a delay (AUTO_SUSPEND).
• D) A Warehouse can be configured to auto-resume when new queries are submitted — Yes. You can enable auto-resume (AUTO_RESUME) so a suspended warehouse automatically resumes on new queries.

• Example commands:

• Even if a warehouse is resizing or auto-suspending, queries will be queued and then executed once the warehouse has the appropriate capacity.

powershell 
Get-AzureVM -ServiceName <service-name> -Name <vm-name> | 
  Set-AzureStaticVNetIP -IPAddress <private-ip> | 
  Update-AzureVM

• New-AzureRMVMConfig configures VM settings but does not itself assign the static IP.
• Set-AzureSubnet is not the appropriate cmdlet for assigning a VM’s private IP.
• The Azure portal option mentioned in the question was not the intended method for this older deployment model.
• Changing settings in Windows Network and Sharing Center is incorrect because Azure assigns the IP through the VM’s virtual network interface; manually configuring it inside the guest can cause conflicts.

• The standard Enterprise Architecture domains are: Business, Data, Application, Technology (BDAT).

• A: Business, strategy, application and technology — includes business and application/tech but uses “strategy” instead of data.
• B: Zachman, TOGAF, Cobit, and Heath architectures — names frameworks, not domains.
• C: Business, data, infrastructure and technology — has business, data, and technology; lacks a distinct application domain (uses “infrastructure” instead).
• D: Process, database, software and technology — covers data (database), application (software), and technology, but omits business.

• The four BDAT domains (business, data, application, technology) is the conventional model you should study.
• None of the options perfectly lists all four BDAT domains. The closest are C (if you map infrastructure to technology) and D (data/application/technology but no business).

• An IDS monitors network traffic for signs of attacks and raises alerts. It can be deployed out-of-band (via a SPAN/mirror port or a tap) so it analyzes traffic without being inline, meaning it doesn’t measurably affect latency.
• An IPS (intrusion prevention system) is inline and can block threats, but that processing can introduce some latency and potential throughput impact.
• A firewall also inspects traffic and can add latency, though usually modest with proper hardware, but its primary purpose isn’t continuous passive analysis.
• A load balancer distributes traffic and isn’t used for intrusion analysis.

• Post-Incident Review (A) is the after-action step used to capture lessons learned, identify process gaps, and drive improvements across the incident response lifecycle. This directly supports process maturity and a stronger security posture.
• Incident Analysis (D) focuses on investigating root causes during/after an incident, which is important but more of a diagnostic activity than a standalone baseline improvement to maturity.
• Fast Eradication (B) and Incident Containment (C) are tactical actions aimed at stopping the incident, not on maturing the process.

• CAPWAP (Control And Provisioning of Wireless Access Points) creates a tunnel between the AP and the Wireless LAN Controller over the IP network. The AP and WLC communicate via this CAPWAP tunnel, which can traverse Layer 2 or Layer 3 networks.
• The AP does not have to be on the same switch as the WLC. It can connect to any switch in the network, as long as there is IP reachability between the AP and the WLC. This is why option D is correct.
• The other options are incorrect:

• Help the team identify the causes of delays.
• Encourage continuous improvement through retrospectives.
• Support the team in changing its process, tools, or collaboration methods.
• Help remove impediments that the team cannot resolve independently.

• A: An impediment log may help, but simply maintaining it does not ensure the impediments are resolved.
• B: Directing the team to solutions conflicts with agile self-management.
• C: Adding impediments to the product backlog could delay their resolution and treats them like product features.

• A Storage Gateway File Gateway provides an on-premises NFS/SMB file share that's backed by objects in S3. This is exactly what you need to migrate an NFS workload: applications continue using NFS, while the actual data moves to and is stored in S3.
• It can cache frequently accessed data locally for performance, while uploads go to an S3 bucket.
• Why the other options aren’t suitable:

• S3 Lifecycle rules automate actions such as transitioning objects to different storage classes or deleting old objects.
• S3 bucket policies control access permissions; they do not preserve earlier object versions.
• S3 server-side encryption protects data confidentiality by encrypting objects at rest, but it does not prevent deletion or overwriting.

• Accidental deletion or overwriting ? S3 Versioning
• Unauthorized access ? bucket policies and IAM
• Data encryption ? server-side encryption

• Use one Azure AD directory for the organization.
• Separate divisions with subscriptions and/or resource groups.
• Assign each division’s administrator appropriate Azure role-based access control (RBAC) permissions, scoped to their subscription or resource group.

• Coordinate and manage the assessment team
• Assign assessment activities
• Direct interviews, examinations, and tests
• Ensure the assessment follows the CAP

• Answer key: Lead Assessor — likely wrong
• CAP-based answer: C3PAO

• A recipient who already has a Microsoft account or an organizational account can authenticate by signing in.
• A recipient without a usable Microsoft identity may receive a one-time passcode by email.
• The passcode is sent to the same email address that was invited and is used to verify ownership of that address.

• SageMaker endpoint: Not required because the model is being used through Amazon Bedrock.
• SageMaker Model Registry: Used for managing SageMaker models, not for making a Bedrock custom model available.
• Grant access in Amazon Bedrock: IAM permissions may still be needed, but granting access alone does not provide the required inference capacity.

• Why: The data is unlabeled, so you can’t train a model with known input-output pairs. Unsupervised learning discovers structure in the data by grouping similar customers into clusters or tiers without labels.
• What it does: Clustering and segmentation (e.g., k-means, hierarchical clustering, DBSCAN, Gaussian mixtures) to form meaningful groups.
• Why the other options aren’t as suitable:

• Correct answer: UBA (A)

• Why: UBA (User Behavior Analytics) analyzes user activity, builds baselines of normal access patterns, and flags deviations (e.g., accessing sensitive projects not related to the user’s role). This insider-threat detection is exactly what the scenario requires.

• Why not the others:

• Correct answer: D (Special category data)

• Why:

• Quick notes:

• Numerical flexibility: Adjusting the number of employees, such as using temporary, part-time or contract staff.
• Temporal flexibility: Varying when employees work, such as through flexitime, overtime or different working hours.
• Shift system flexibility: Changing work patterns or shift arrangements; it is not specifically about moving between tasks.

• Ensure that only users who manage the production environment sign in to the Azure portal from a hybrid Entra-joined device and authenticate with MFA.

• Use Microsoft Entra ID Protection (Identity Protection) to enforce MFA enrollment:

• Update the existing Capolicy1 (a Conditional Access policy):

• Identity Protection MFA registration policy ensures users are enrolled in MFA (Box 1 choice).
• CA policy Capolicy1 with aGrant control of “Require MFA” enforces MFA during sign-in (Box 2 choice).
• Both work together with the hybrid-joined device requirement to satisfy the authentication/authorization rules.

• Apply the MFA registration policy to the production-management users.
• Apply the MFA grant to Capolicy1 for those same users/groups.

• Answer: C – netstat -an

• netstat -an lists all active connections and listening ports with numeric addresses, without resolving names. This lets you spot DoS patterns such as a flood of connections to a specific port or many connections from a single or few IPs.
• The other options don’t help as directly:

• Windows: netstat -an and look for numerous ESTABLISHED connections to a service or many SYNs to a port.
• Filter by port, e.g., netstat -an | findstr :80, or on Linux: ss -tunap | grep ':80'.

• Netstat provides a snapshot. DoS detection often benefits from continuous monitoring, flow data, and IDS/IPS logs.

• The requirement is a fully managed file server that natively supports Microsoft workloads and file systems and uses the SMB protocol. FSx for Windows File Server is built specifically for Windows workloads, provides native SMB file shares, and supports Windows permissions/Active Directory integration.
• Why the others don’t fit:

• Goal: serving a static website globally with minimal latency.
• Why C works: CloudFront is a Content Delivery Network (CDN) that caches content at many edge locations around the world. When users request the site, CloudFront serves cached copies from the nearest edge location, greatly reducing latency. It also reduces load on your EC2 origin by handling many requests at the edge.
• Why the other options aren’t as good:

• The correct answer is A: CCTV recordings are not regularly reviewed.

• CCTV is a monitoring/control mechanism. If recordings aren’t reviewed, security events (break-ins, policy violations, equipment tampering) can go undetected and unaddressed.
• Regular review is essential for deterrence, incident response, and forensic evidence. Without it, the entire CCTV control provides little value.

• B (records deleted after one year) affects forensic availability, but it’s a data-retention issue rather than the ongoing effectiveness of the surveillance program.
• C (footage not recorded 24x7) creates gaps in coverage, which is a concern, but regular review of available footage still supports detection; 24x7 coverage is a separate policy/perimeter issue.
• D (cameras not in break rooms) is more about privacy and space planning than core data-center security monitoring.

• Copilot??????????
• ???????????????
• ??????????
• ?????????????
• ???????????????????

• Prompts and Suggestions: Retained for 28 days
• User Engagement Data: Kept for Two Years

• Wiping securely overwrites the drive so the original data cannot reasonably be recovered. It is generally less expensive than physically destroying the device.
• Recycling could expose the data if the drive is not securely erased first.
• Shredding physically destroys the drive and is effective, but usually more costly and prevents reuse.
• Deletion only removes file references; it is not a secure sanitization method.

• Actual filename: Document.xml.txt
• Explorer displays: Document.xml
• File type: Text Document (.txt)

text 
Document.txt ? Document.xml

• Basic: No technical or architectural guidance.
• Standard: Technical support, but not the required design-assessment service.
• Professional Direct: Provides advisory and architecture guidance.
• Premier: Provides it too, but is unnecessarily expensive for this requirement.

Why

cmd 
PowerShell.exe -ExecutionPolicy Bypass -File C:\Scripts\ConfigureVM.ps1

Why the other options are less suitable

• GPO logon script: Runs only when a user logs on and may not run during initial VM provisioning.
• GPO startup script: Can work, but requires the VM to be joined to the domain and the policy to be applied. It is also normally evaluated at each startup.
• Place scripts in a VHD: Merely placing scripts on a disk does not cause them to execute.