IIA IIA-CIA-Part3 Exam Prep
Certified Internal Auditor - Part 3, Business Analysis and Information Technology (Page 97 )

• Answer: D) Shadow IT

• Why: Shadow IT is when employees use unsanctioned tools or bypass IT controls (like the VPN) to access services, often without IT oversight. It’s an internal behavior, not an external attacker’s activity.

• Not these:

• Quick note: This creates risk due to lack of visibility and control. Mitigations include a defined approved-tools list, enforcing VPN usage, device management, and continuous monitoring.

• Co to znaczy: transakcje zachowuja sie tak, jakby byly wykonywane jeden po drugim. Dzieki temu nie ma brudnych odczytów, niepowtarzalnych odczytów ani phantom reads.

• Implementacja: PostgreSQL uzywa SSI (Serializable Snapshot Isolation). W praktyce oznacza to, ze jesli wykryje konflikt miedzy transakcjami, jedna z nich zostanie zakonczona bledem “serialization failure” i trzeba ja ponowic.

• Zalózmy tabele orders(customer_id int, amount int).

• Transakcja T1:

• Transakcja T2, równoczesnie:

• T1 ponownie wykonuje to zapytanie:

• Create and manage catalogs of approved IT services
• Govern and publish infrastructure-as-code (IaC) templates, commonly AWS CloudFormation templates
• Control which users can deploy specific products and configurations
• Apply versioning, permissions, and deployment constraints

• AWS Resource Explorer: Searches and discovers AWS resources; it does not govern IaC templates.
• AWS Organizations: Manages multiple AWS accounts, policies, and consolidated billing.
• AWS Systems Manager: Helps operate and manage deployed resources, such as patching and automation, but is not primarily a catalog for governed IaC products.

• What it’s asking: In an ARM template, for an Availability Set, what value should you set for the property platformFaultDomainCount to maximize availability during fabric failures or maintenance?

• Key concept: Fault domains are groups of hardware that can fail independently. By spreading VMs across more fault domains, you reduce the risk that a single hardware fault takes out many VMs.

• Important detail: For managed Availability Sets, the number of fault domains you can use varies by region — typically 2 or 3.

• What to choose: Set platformFaultDomainCount to the maximum supported in your region. In most regions this is 3, which gives you the best resilience. If your region only supports 2, you’d use 2.

• Answer: 3 (Max Value). In ARM template syntax, this would appear as "platformFaultDomainCount": 3 (within the Availability Set resource).

• In Microsoft Teams Phone System, a single Auto Attendant can handle multiple time-based greetings by using separate schedules for office hours, after hours, weekends, and holidays.
• You can configure one Auto Attendant with four distinct greetings mapped to:

• Open the Teams admin center > Voice > Auto attendants, edit or create an Auto Attendant.
• Under Time-based routing, define four rules:

• Create a Holiday schedule with the relevant dates (e.g., Easter, Christmas) and assign the Holiday greeting.
• Save the configuration.

• If your environment cannot separate weekend from after-hours within a single Auto Attendant, you might technically need more than one Auto Attendant.

• Reusing features across different models and teams
• Consistent feature definitions
• Managing feature versions and metadata
• Using features for both training and inference

• SageMaker Data Wrangler: Prepares and transforms data; it is not primarily a shared feature repository.
• SageMaker Clarify: Helps detect bias and explain model predictions.
• SageMaker Model Cards: Documents models, including intended use, risks, and evaluation results.

• The correct answer: B) Synthetic identity theft.

• Synthetic identity theft involves creating a new, forged identity by combining information from multiple real people (e.g., names, dates of birth, SSNs) to commit fraud.
• In the scenario, Adam “created a new identity by obtaining information from different victims,” which matches the idea of synthesizing data to form a fake person.

• Medical identity theft: using someone’s medical information to obtain care or services.
• Tax identity theft: using someone’s personal info to file fraudulent tax returns.
• Social identity theft: impersonating someone to deceive others socially or publicly.

• Look for phrases like “create a new identity” or “combine information from multiple people” to identify synthetic identity theft.

• Enable the owner dimension
• Allocate a standard costing inventory model

• Owner dimension (B): This dimension Lets you track who owns the stock. By enabling the owner dimension, items can be configured as either company owned or consignment (vendor-owned) when you create or edit items. Without enabling this dimension, you can’t designate ownership per item.
• Standard costing inventory model (D): Selecting a costing model determines how item costs are calculated and posted. Standard costing provides a fixed cost per unit, which is commonly used for agreed pricing scenarios like consignment arrangements for easier accounting and valuation. It helps ensure consistent cost treatment across transactions for items that can be owned by the company or on consignment.

• Batch dimension (A): Batch tracking is unrelated to ownership and isn’t required to support company-owned vs. consignment configurations.
• Moving average costing (C): This is an alternative costing method. It’s not required to enable ownership config, and the exam’s expected choice focuses on standard costing for this scenario.

• Answer: C – netstat -an

• netstat -an lists all active connections and listening ports with numeric addresses, without resolving names. This lets you spot DoS patterns such as a flood of connections to a specific port or many connections from a single or few IPs.
• The other options don’t help as directly:

• Windows: netstat -an and look for numerous ESTABLISHED connections to a service or many SYNs to a port.
• Filter by port, e.g., netstat -an | findstr :80, or on Linux: ss -tunap | grep ':80'.

• Netstat provides a snapshot. DoS detection often benefits from continuous monitoring, flow data, and IDS/IPS logs.

• Correct answer: B — A reservation for the server based on the MAC address.

• Why this is the best choice:

• Why the other options are less suitable:

• Quick takeaway: Use a DHCP reservation to give the file server a fixed IP while still benefiting from centralized DHCP management.

• Correct answer: D — use the same hashing algorithm as the sender's to create a numerical representation of the file.

• Integrity is verified by recomputing the hash on the received data and comparing it to the sender’s hash. This must use the same hash function; if you use a different algorithm, the digests won’t match even if the data is intact.
• The hash output is a fixed-length digest (a numerical representation). Whether you call it a “binary image” or a “numerical representation,” the key is that you generate the same type of digest with the same algorithm and compare them.

• A: same algorithm but the result is described as a binary image instead of a digest; you still compare the digest, but the phrasing is less precise.
• B/C: using a different algorithm would produce a different digest, causing false mismatch or failure to verify integrity.

• A private IP address on the virtual network
• An associated public IP address

• Phishing can map to two MITRE ATT&CK tactics depending on the attacker’s objective.

• Therefore, phishing isn’t confined to a single tactic; it can serve both Reconnaissance and Initial Access, which is why option D (Reconnaissance, Initial Access) is correct.

kusto 
Event | where EventType == "error"

• == is the KQL equality operator.
• -eq is a PowerShell operator, not KQL.
• is is not the correct equality operator in this context.

text 
Event | where EventType –eq "error"

• Event | search "error" — valid, broad search.
• search in (Event) "error" — valid, broad search.
• Event | where EventType == "error" — valid, targeted filter.

• IKE: Negotiates security parameters for IPsec VPNs; it does not identify switch ports.
• VLAN: A logical network segmentation method, not a discovery protocol.
• netstat: Displays local network connections and listening services, but cannot identify the physical switch or port.

• Post-Incident Review (A) is the after-action step used to capture lessons learned, identify process gaps, and drive improvements across the incident response lifecycle. This directly supports process maturity and a stronger security posture.
• Incident Analysis (D) focuses on investigating root causes during/after an incident, which is important but more of a diagnostic activity than a standalone baseline improvement to maturity.
• Fast Eradication (B) and Incident Containment (C) are tactical actions aimed at stopping the incident, not on maturing the process.

• Why: A multi-modal embedding model maps both text and images into a shared vector space, enabling cross-modal similarity and retrieval (e.g., find images matching a text query or text matching an image).

• What it does: Enables efficient similarity search using a vector database or nearest-neighbor indexing.

• Why the other options aren’t suitable:

• Quick implementation note: you’d typically pair the embeddings with a vector store (e.g., ANN index) and possibly fine-tune on domain data for better alignment across modalities.

• What the dataflow options mean:

• Why C fits best:

• As the project progresses, you gain information, refine requirements, and lock down baselines (scope, schedule, cost). This reduces overall risk and uncertainty because more is known and addressed.
• At the same time, changes become more costly over time. Later changes can affect already approved baselines, cause rework, impact the critical path, require more coordination, and incur penalties or delays, all of which raise the cost of making changes.

• A — Add a Path for Stage: A Path lets users update the Opportunity’s Stage directly from the record page, without opening the full edit form. It can also display guidance and key fields.
• B — Use a Kanban list view: Users can move Opportunities between stages by dragging records between columns, which is ideal when Stage is the only field they normally change.

• Server — provides services or resources
• Endpoint — a user device connected to the network
• Ethernet — a networking technology, not a filtering device
• Firewall — filters and controls traffic

1. Download the updated VPN client configuration package from the Azure VPN gateway.
2. Remove or update the existing VPN client configuration on the Windows 10 workstation.
3. Install the new package and reconnect.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Cloud financial management
• Portfolio and program management
• Risk management
• Data governance
• Compliance and oversight

• IaaS provides virtualized infrastructure, including VMs, disks, and networking. You manage the guest operating system and software installed on the VM.
• PaaS provides a managed platform for deploying applications without managing the underlying VMs or operating systems. Examples include Azure App Service and Azure Functions.

• Answer: No

• Why: Using several Azure AD directories (tenants) would create separate identity stores for each division, which significantly increases administrative overhead. You’d need cross-tenant access management, separate governance, and duplicated admin efforts, which goes against the goal of minimizing administrative work.

• How to meet the goal instead:

• Global Unicast: These are the IPv6 addresses that are globally routable on the Internet. They’re allocated by Regional Internet Registries (RIRs) and can be reached from anywhere with proper routing (similar to IPv4 public addresses). Example ranges include 2000::/3.

• Link-local: fe80::/10. Used only on the local link; not routable beyond the directly connected network.

• Unique Local Addresses (ULA): fc00::/7. Private addresses for internal use within an organization; not publicly routable on the Internet (like IPv4 private addresses).

• Multicast: ff00::/8. One-to-many addresses used for group communication, not unicast routing.

• The diagnostic output shows that the protocol is TCP (proto=6) and the session state is 2.
• In FortiGate’s session output, state=2 maps to SYN_SENT. This means the TCP SYN has been sent but the handshake hasn’t completed yet.
• Therefore, the session is not ESTABLISHED, FIN/ACK-related states, or other states; it’s in SYN_SENT.

• Disabling GPS: Affects location services, not email connectivity.
• Configuring 4G usage only: Does not enable international data access and could prevent connectivity if 4G is unavailable.
• Connecting using a hotspot: Could provide data, but it is not the most direct solution and depends on another network or device.

Why

cmd 
PowerShell.exe -ExecutionPolicy Bypass -File C:\Scripts\ConfigureVM.ps1

Why the other options are less suitable

• GPO logon script: Runs only when a user logs on and may not run during initial VM provisioning.
• GPO startup script: Can work, but requires the VM to be joined to the domain and the policy to be applied. It is also normally evaluated at each startup.
• Place scripts in a VHD: Merely placing scripts on a disk does not cause them to execute.

• User1 can sign in because the account is cloud-only. It does not depend on the on-premises domain.
• User3 can sign in because the account uses Password Hash Synchronization (PHS). Azure AD has a synchronized password hash and can validate the sign-in even when connectivity to on-premises Active Directory is unavailable.
• User2 cannot sign in because the account relies on Pass-through Authentication (PTA). PTA sends the authentication request to an on-premises PTA agent, which must contact a domain controller. With the internet connection from on-premises lost, that validation cannot occur.

• Answer: D

• The strongest security comes from enforcing access at the storage layer. An IAM policy scoped to the Cognito identity prefix restricts each user to their own S3 prefix (folder), so users can only access their own files regardless of client or server code.
• This per-user isolation reduces risk of cross-user data access and is more robust than UI validation or Lambda/API validation alone.
• Implementation note: attach a policy to the Cognito identity role that allows actions on arn:aws:s3:::your-bucket/${cognito-identity.amazonaws.com:sub}/* (per-user prefix). Ensure TLS in transit and enable at-rest encryption (SSE-S3 or SSE-KMS). Use multipart upload for large files up to 300 MB.

• A: Security groups do not control traffic to an S3 gateway endpoint in this way. Gateway endpoints are configured through route tables.
• B: An S3 bucket policy may be needed for authorization, but the error specifically indicates a connectivity or endpoint-routing problem.
• C: Glue connection settings do not require a fully qualified domain name to resolve this endpoint issue.

• Admin access to the deployment pipeline (B) – lets the developers use the pipeline and deploy content.
• Contributor access to the Development and Test workspaces (E) – required to deploy items into those workspaces.
• Viewer access to the Production workspace (D) – lets them view Production content without allowing deployment or modification.

• Contributor access to Production (F), because that could allow changes or deployment there.
• Viewer access to Development/Test (C), because Viewer is insufficient for deployment.
• Build permission to Production semantic models (A), because building reports on a semantic model is not required merely to view Production items.

• Answer: B — Improve employee training and awareness

• Why this is correct:

• Why the other options are less effective here:

• Quick practical note:

• What the scenario asks: You have a Power BI semantic model that pulls from multiple sources (Azure SQL Database and SharePoint Online), must support a single dataset for three reports, keep data current (daily refresh by 7 AM PT), and apply RLS to limit sales data by region. You need to choose a storage mode for the tables.

• Correct choice: Dual storage mode.

• Why Dual fits:

• Key concepts:

• A separate scope using a /32 subnet: A /32 identifies one host, but it is not a practical DHCP scope for this purpose.
• A static IP within the DHCP range: This can cause an IP address conflict if DHCP assigns that address to another device.
• SLAAC: Used for automatic IPv6 address configuration, not for assigning a predictable IPv4 address through DHCP.

• Answer: Record Producer (option D)

• Why: In ServiceNow HR Service Delivery, to make an HR Service usable from the Employee Service Center (self-service portal), there must be a way for employees to submit the request. A Record Producer provides the employee-facing form that creates the underlying HR Case when submitted. Without a linked Record Producer, the HR Service wouldn’t offer a submit form in the Employee Center.

• What the other fields are generally for (not required for exposure):

• Quick check: Look at the HR Service definition and ensure a Record Producer is associated so employees can submit requests from the Employee Center.

• The Well-Architected Framework has five pillars: Operational Excellence, Security, Reliability, Performance Efficiency, and Cost Optimization.
• Operational Excellence: how you run and improve your systems—monitoring, incident response, and evolving processes.
• Reliability: the ability of a workload to recover from failures, maintain uptime, and scale as demand changes.

• Availability (A) is not a pillar name; it’s an outcome that relates to Reliability.
• Scalability (C) isn’t a pillar name; scalability touches on Performance Efficiency.
• Responsive design (D) is not a pillar in the Well-Architected Framework.

• A private IP address on the virtual network
• A public IP address associated with its IP configuration

• Authenticating websites with TLS/HTTPS
• Enabling certificate-based VPN authentication
• Signing or encrypting email
• Supporting device or user authentication

• VLAN tagging: Uses network-frame tags, such as 802.1Q; it does not rely on X.509 certificates.
• LDAP: May integrate with PKI in some environments, but X.509 certificates are not most commonly associated with LDAP itself.
• MFA: Certificates can be one authentication factor, but X.509 is fundamentally a PKI technology.

• Answer: C — Spot Instances

• Why: The workload is a test environment that can be interrupted and does not need to run continuously. Spot Instances let you bid on unused EC2 capacity at a deep discount, making them the most cost-effective option for interruptible workloads.

• Why not the others:

• Quick tips:

• Import mode loads the data into the Power BI model. Visuals query the in-memory model, which generally provides faster calculation and rendering than DirectQuery.
• Import mode also minimizes online processing because report interactions do not send queries back to the dataflow or SQL Server.
• A daily refresh can load data through the previous day, satisfying the freshness requirement without unnecessary hourly processing.

• DirectQuery keeps querying the data source or dataflow during report use, increasing online processing and potentially slowing visuals.
• Adding a gateway enables connectivity for on-premises sources, but it does not remove the performance disadvantages of DirectQuery.
• An hourly Power Automate refresh is unnecessary when the requirement is only data through the previous day and creates additional processing overhead.

• Answer: No (B)

• SaaS (Software as a Service) delivers applications over the internet; you don’t manage the underlying infrastructure or OS.
• Deploying Azure virtual machines requires provisioning and managing virtual machines, OS, updates, and networking—this is classic IaaS (Infrastructure as a Service).
• PaaS is for managed runtime environments (apps hosted on a platform), not for VM deployment.

• Assign users or their team an appropriate security role.
• Ensure the role has the required table privileges, such as read, create, write, and append.
• Share the app with that security role in the app designer.

• Dynamics administration center: Used for environment and service administration, not routine app access configuration.
• Manage Roles: Not the specific Dataverse area used to define app and data permissions.
• Security Roles: Define what users can access and which operations they can perform.

• Correct answer: B — From the code repository, modify Startup.cs (in ASP.NET Core you configure the Application Insights SDK in code, not with ApplicationInsights.config).

• Why the other options aren’t correct:

• How to implement fixed-rate sampling (ASP.NET Core):

var builder = WebApplication.CreateBuilder(args); 


    builder.Services.Configure<TelemetryConfiguration>(telemetryConfiguration => 
    { 
        var builder = telemetryConfiguration.DefaultTelemetrySink.TelemetryProcessorChainBuilder; 
        double fixedSamplingPercentage = 10; // 10% sampling 
        builder.UseSampling(fixedSamplingPercentage); 
    }); 


    builder.Services.AddApplicationInsightsTelemetry(new ApplicationInsightsServiceOptions 
    { 
        EnableAdaptiveSampling = false 
    }); 


    var app = builder.Build();

• On-Demand: You pay by the hour with no long-term commitment. This is ideal for workloads that are infrequent or have highly variable usage. Since this job runs only 24 hours once per year, you pay only for those 24 hours, with no wasted upfront or long-term payments.
• Reserved Instances: Require a 1- or 3-year commitment and pay for capacity whether you use it or not. For a workload that runs just 24 hours a year, you’d be paying for most of the term unused, making it far less cost-efficient.
• Spot Instances: Can be interrupted whenever AWS needs capacity, which is unacceptable for an uninterruptible workload.
• Dedicated Instances: Generally more expensive and aimed at licensing or compliance requirements; not needed for this use case.

• B. Enable column profile — This turns on column profiling, which computes statistics like min and max for each column.
• C. Show column profile in details pane — This ensures the per-column profile is visible in the details pane.
• E. Enable details pane — This makes the details pane available so you can view the column profile there.

• A. Show column value distribution may help with distribution but isn’t specifically about min/max.
• D. Show column quality details shows data quality (valid/null counts), not min/max.

• Geo-redundant storage (GRS) replicates data to a secondary Azure region, but the secondary copy is normally unavailable for read access.
• RA-GRS provides geo-replication and read-only access to the secondary region, satisfying all requirements.
• Zone-redundant storage (ZRS) replicates data across availability zones within the same Azure region, not separate geographic regions.
• Locally redundant storage (LRS) keeps copies within a single datacenter or region and does not provide geographic resiliency.

• Goal: Guests should not use cameras, but company users can.
• Correct configuration: Guest access settings in the Org-wide settings.

• External access: Controls external-domain communication, not guest capabilities inside Teams.
• Teams settings in Org-wide settings: Too generic; doesn’t specifically target guest capabilities.
• Audio & Video in the default Meeting Policy: Would affect everyone assigned to that policy. To meet the requirement without impacting internal users, you’d need separate policies or guest-specific settings; the exam focuses on the guest-access policy.