ISC2 ISSMP Exam Prep
Information Systems Security Management Professional (Page 17 )

• Answer: No.

• Why: Microsoft Managed Desktop (MD) is a managed service for end-user desktops (Windows devices used by people), not a service for provisioning, managing, or lifecycle-managing large fleets of virtual machines. It won’t help automate weekly creation and deletion of many VMs, especially with mixed OS (Windows and Linux).

• Relevant concept: To reduce administrative effort for rapidly provisioning and tearing down VMs, an Azure service like Azure DevTest Labs is appropriate. DevTest Labs lets you:

• Takeaway: The proposed solution (MD) does not meet the goal; the correct approach is to use a lab-oriented service such as Azure DevTest Labs for frequent, ephemeral VM deployments.

• A. Implement retries with exponential backoff

• C. Reduce the frequency and/or size of requests

• B. Use PutRecord instead of PutRecords — PutRecord sends one record per call and does not remove the underlying throughput limitation. It may increase request overhead.
• D. Use Amazon SNS instead — SNS is not a direct fix for Kinesis shard throttling and changes the required streaming architecture.
• E. Reduce KCL consumers — KCL consumers read from Kinesis; they do not solve producer-side PutRecords throttling.

• L2TP uses UDP port 1701 for the L2TP control channel.
• The destination port is 1701; the source port is a dynamically chosen ephemeral port on the client (not 1701).
• Therefore the statement that both source and destination ports are 1710 is incorrect (and 1710 is not the standard L2TP port).

• The destination port should be 1701, not 1710.
• The source port should be an ephemeral port chosen by the client, not 1701.

• The 99.99% availability SLA for VMs is achieved when you run VMs across two or more Availability Zones.
• Two VMs in a single Availability Zone do not meet the 99.99% target (their SLA is lower, e.g., around 99.95% or less depending on configuration).

• Deploy at least two VMs across two different Availability Zones (one VM in each zone, or both in two zones with a load balancer).
• This provides the required zone redundancy and the 99.99% SLA.

• Cross-account access is typically implemented with an IAM role. You create a role in the target account (where the resources live) and configure a trust policy that allows principals from the source account to assume that role.
• Users in the source account then assume the role (via Switch Role in the console or STS:AssumeRole) and receive temporary credentials with the role’s permissions to access the resources.

• IAM group: Groups exist inside a single account; they don’t grant cross-account access.
• IAM tag: Tags are metadata and do not grant access.
• IAM Access Analyzer: It analyzes and identifies public or cross-account access but does not grant access itself.

• In Microsoft Entra (Azure AD), admin roles can be scoped to either the entire directory (tenant) or to an Administrative Unit (AU). To assign a role at an AU scope, the user must be a member of that AU.

• Roles in question: Security Administrator and User Administrator can be scoped either to the Directory or to a specific AU.

• User1 is a member of AU1. Therefore, User1 can be assigned either at the AU scope (AU1) or at the Directory scope (global).

• User2 is not a member of AU1. Therefore, User2 cannot be assigned at the AU scope; the valid scope for User2 is only the Directory scope.

• User1: can be assigned at AU1 and at Directory scopes.
• User2: can be assigned only at the Directory scope.

• Answer: A

• Reason: The Standard web tier is the lowest tier that provides dedicated compute, built-in load balancing across instances, and sufficient storage to host multiple apps with custom domains. Basic may lack the required scalability/storage, while Free/Shared do not offer dedicated compute or proper load balancing.

• According to the provided answer key, the four options are: Upload File, User Criteria, HR Profiles, HR Criteria (options B, D, F, G).

• Upload File: Filter by a file you upload (e.g., CSV) that provides data for bulk case creation.
• User Criteria: Filter by criteria related to users (e.g., role, department) to select target users.
• HR Profiles: Filter by HR profile data associated with users.
• HR Criteria: Filter by HR-related criteria or attributes.

• Quick context: In a three-tier network (Access, Distribution, Core), roles are:

• Why A is correct: The Distribution layer runs Layer 2 and Layer 3 technologies. It often handles VLAN access (L2) and can perform inter-VLAN routing or connect to the core (L3). So it makes sense for the distribution layer to support both L2 and L3.

• Why B is correct: The Core layer is designed to maintain continuous connectivity when devices fail. It is built for high availability and redundancy, providing multiple paths so the network remains reachable even if some components fail.

• Why the others are not correct:

kusto 
Event | where EventType == "error"

• == is the KQL equality operator.
• -eq is a PowerShell operator, not KQL.
• is is not the correct equality operator in this context.

text 
Event | where EventType –eq "error"

• Event | search "error" — valid, broad search.
• search in (Event) "error" — valid, broad search.
• Event | where EventType == "error" — valid, targeted filter.

• Amazon Cognito is designed for customer-facing apps to handle user sign-up, sign-in, and access control, and it can federate identities from social providers (Facebook, Google, etc.) or enterprise IdPs via SAML/OpenID Connect.
• You can configure a Cognito User Pool and connect social identity providers, then use tokens (JWT) to authorize backend API calls.

• AWS Directory Service is for connecting your AWS apps to an existing directory (like Active Directory) for enterprise users, not social login for customer apps.
• AWS IAM is for managing access to AWS resources, not end-user authentication for your website.
• AWS IAM Identity Center (AWS SSO) provides SSO for AWS accounts and enterprise apps, not typical social logins for consumer-facing websites.

• Port 515: LPD/LPR line-printer service
• Port 631: IPP — Internet Printing Protocol
• Port 9100: JetDirect/RAW printing, commonly used by network printers

• Linux machine: Linux could run these services, but the three printer-specific ports strongly indicate a printer.
• Router: Routers may use Telnet and HTTP, but normally would not expose ports 515, 631, and 9100 together.
• Windows machine: Windows can share printers, but this particular service combination is more characteristic of a network printer’s embedded operating system.

• Active vs passive: Active assessment involves actively scanning targets by sending probes/packets to identify hosts, services, and vulnerabilities. Passive assessment observes traffic without probing.
• External vs internal: External assessment is about testing from outside the network perimeter; the scenario doesn’t specify external vantage, only that tools are identifying hosts/services across the enterprise network.

Simple explanation

• The Azure VPN gateway to connect to
• Authentication settings
• Routes for networks that the client can access

• Drop violating frames
• Log or alert on the violation
• Shut down or restrict the port

• Load balancer: Distributes application traffic; it does not control switch MAC learning.
• IPS: May detect some network attacks but is not the primary control for switch MAC-table exhaustion.
• NGFW: Protects traffic crossing network boundaries, while MAC flooding occurs at the switching/LAN layer.

• The correct answer is Mass Transfer Tool.

• The Mass Transfer Records tool is Salesforce’s built-in way to reassign ownership of existing records in bulk. In this scenario, you need to transfer ownership of the departed rep’s accounts and opportunities to a new rep while keeping the team structure intact.

• Go to Setup > Data Management > Mass Transfer Records.
• Choose the object: Accounts (and then Opportunities, if needed).
• Set “Transfer From” (the leaving rep) and “Transfer To” (the new rep).
• Decide whether to transfer related records as well (e.g., opportunities tied to accounts) and proceed.
• Review and confirm.

• Data Loader / Data Import Wizard are for bulk import/export, not bulk reassigning ownership.
• Dataloader.io is a third-party tool; the built-in Mass Transfer tool is the standard Salesforce method for this task.

• Phishing can map to two MITRE ATT&CK tactics depending on the attacker’s objective.

• Therefore, phishing isn’t confined to a single tactic; it can serve both Reconnaissance and Initial Access, which is why option D (Reconnaissance, Initial Access) is correct.

• Review iteration length: Changing duration does not resolve unclear requirements.
• Limit work in progress: Useful when excessive multitasking is the problem, but it does not directly clarify requirements.
• Review individual performance: The issue is a process and backlog-quality problem, not necessarily an individual performance problem.

• Coordinate and manage the assessment team
• Assign assessment activities
• Direct interviews, examinations, and tests
• Ensure the assessment follows the CAP

• Answer key: Lead Assessor — likely wrong
• CAP-based answer: C3PAO

• Side loading means installing software from sources outside official or trusted repositories.
• This process can bring in malicious payloads because the installed software hasn’t been vetted. A rootkit is a type of malware that hides its presence and maintains privileged access, making it a prime risk when using untrusted sources.
• Why not the other options:

• Only install apps from trusted sources; verify signatures.
• Use application whitelisting and security controls to block sideloading.
• Keep systems updated and use anti-malware tools capable of detecting rootkits.

• The explanation states that Traffic Analytics can be enabled by a user with one of these subscription-level roles:

• Question 34 — Network Contributor: Yes
• Question 35 — Owner: Yes
• Question 36 — Reader: Yes, according to the stated explanation and documentation

1. Remote access to a Windows PC
2. Full chat and optional game-console functions

• Windows Remote Desktop (RDP) uses TCP 3389. The router needs a port-forwarding rule that sends incoming traffic on that port to the Windows PC’s internal IP address.
• The game console should connect through the wireless AP. Using WPA2-PSK provides the required wireless security while allowing normal online, chat, and optional services.
• The firewall should separate the internal network from the screened subnet. Its screened-subnet-side address is shown as 10.100.0.1.
• Devices must be placed in the correct network locations: the PC behind the router, the console on the wireless AP, and the firewall between the appropriate network segments.

• SageMaker endpoint: Not required because the model is being used through Amazon Bedrock.
• SageMaker Model Registry: Used for managing SageMaker models, not for making a Bedrock custom model available.
• Grant access in Amazon Bedrock: IAM permissions may still be needed, but granting access alone does not provide the required inference capacity.

• IPsec: Protects traffic at the network layer, commonly for VPNs; it is not WPA2’s authentication protocol.
• SSL: Protects specific application sessions and has largely been replaced by TLS.
• SSH: Secures remote command-line administration.

• As the project progresses, you gain information, refine requirements, and lock down baselines (scope, schedule, cost). This reduces overall risk and uncertainty because more is known and addressed.
• At the same time, changes become more costly over time. Later changes can affect already approved baselines, cause rework, impact the critical path, require more coordination, and incur penalties or delays, all of which raise the cost of making changes.

powershell 
Get-AzureVM -ServiceName <service-name> -Name <vm-name> | 
  Set-AzureStaticVNetIP -IPAddress <private-ip> | 
  Update-AzureVM

• New-AzureRMVMConfig configures VM settings but does not itself assign the static IP.
• Set-AzureSubnet is not the appropriate cmdlet for assigning a VM’s private IP.
• The Azure portal option mentioned in the question was not the intended method for this older deployment model.
• Changing settings in Windows Network and Sharing Center is incorrect because Azure assigns the IP through the VM’s virtual network interface; manually configuring it inside the guest can cause conflicts.

• Equipment and hardware
• Facilities
• Inventory
• Backup media
• Supplies stored at an alternate or remote location

• Personal belongings of staff: Usually not organizational assets.
• DR line-item revenues: Revenue is a financial impact, not a physical asset.
• Cloud-based applications: These are primarily logical or information-processing assets, even though they depend on physical infrastructure.

• Correct answer: only new data added to the eventhouse (option E).
• Why: When you enable OneLake availability for the eventhouse, OneLake starts syncing data going forward. It does not automatically backfill or copy over data that already exists in the eventhouse before the enablement.
• What that means in practice: Any data added to the eventhouse after you enable OneLake will appear in OneLake (and be visible from OneLake file explorer). Pre-existing data in the eventhouse stays there unless you perform a separate backfill/copy operation outside the standard OneLake enablement.
• How to verify: add a small new dataset to the eventhouse after enabling OneLake availability, then check OneLake to confirm the new dataset appears.

• Strongest encryption algorithms: Choose the strongest available encryption and integrity options, typically AES with the largest key size and a secure integrity algorithm.
• Encrypt all traffic: Select tunnel mode rather than transport mode. Tunnel mode encrypts the entire original IP packet, which is appropriate for a site-to-site VPN between branch networks.
• Secret-password authentication: Configure a pre-shared key (PSK) on both VPN concentrators. The key must match at both ends.

• Authenticating websites with TLS/HTTPS
• Enabling certificate-based VPN authentication
• Signing or encrypting email
• Supporting device or user authentication

• VLAN tagging: Uses network-frame tags, such as 802.1Q; it does not rely on X.509 certificates.
• LDAP: May integrate with PKI in some environments, but X.509 certificates are not most commonly associated with LDAP itself.
• MFA: Certificates can be one authentication factor, but X.509 is fundamentally a PKI technology.

• Assignment
• Decision
• Get Records
• Loop

• Screen flow: Would include a Screen element.
• Inactive version: Inactive status does not restrict the available elements.
• Activated version: Activation status also does not determine the toolbox contents.

• The standard Enterprise Architecture domains are: Business, Data, Application, Technology (BDAT).

• A: Business, strategy, application and technology — includes business and application/tech but uses “strategy” instead of data.
• B: Zachman, TOGAF, Cobit, and Heath architectures — names frameworks, not domains.
• C: Business, data, infrastructure and technology — has business, data, and technology; lacks a distinct application domain (uses “infrastructure” instead).
• D: Process, database, software and technology — covers data (database), application (software), and technology, but omits business.

• The four BDAT domains (business, data, application, technology) is the conventional model you should study.
• None of the options perfectly lists all four BDAT domains. The closest are C (if you map infrastructure to technology) and D (data/application/technology but no business).

• Context: You’re configuring a Windows Autopilot deployment profile (Profile1) for Windows 11 devices. The hotspot asks you to pick the correct behavior for two statements based on the profile’s settings.

• Box 1: “can modify the desktop settings only for themselves”

• Box 2: “Cortana settings” with options like computer name, keyboard layout, etc.

• Custom domains
• 10 GB storage per web app
• Each app runs on dedicated compute
• Load balancing between instances is included
• Costs minimized

• Answer: A (Standard)

• Why:

• Note: In App Service, multiple apps in the same plan share compute resources. If you truly need isolation per app, you’d typically use separate App Service Plans, which increases cost beyond a single Standard plan.

• Answer: Record Producer (option D)

• Why: In ServiceNow HR Service Delivery, to make an HR Service usable from the Employee Service Center (self-service portal), there must be a way for employees to submit the request. A Record Producer provides the employee-facing form that creates the underlying HR Case when submitted. Without a linked Record Producer, the HR Service wouldn’t offer a submit form in the Employee Center.

• What the other fields are generally for (not required for exposure):

• Quick check: Look at the HR Service definition and ensure a Record Producer is associated so employees can submit requests from the Employee Center.

• IPv6 address types you’ll typically see:

• Unique Local Addresses (ULAs)

• If an address begins with fdXX:… or fc00:…, place it under “Unique Local Address” (ULA).
• If it begins with 2000::/3, place it under “Global Unicast.”
• If it begins with fe80::, place it under “Link-local.”
• If it begins with ff00::, place it under “Multicast.”

• A assigned without var becomes a global variable (in non-strict mode). So after myFunction(), a = 5 is accessible.
• b is declared with var inside the function, so it’s local to that function (function-scoped). It’s not defined in the outer (global) scope.

• console.log(a) prints 5.
• console.log(b) throws a ReferenceError: b is not defined.

• Key difference: DirectQuery leaves data in the on-prem SQL Server and queries it live. That means every visual request can trigger online processing on the source, which can be slower and adds load on the on-prem system. In contrast, Import loads data into the Power BI data model, so visuals render from the in-memory engine (faster).

• Why that helps with the requirements:

• Why not A or B: Both rely on live data via DirectQuery, which contradicts the goal to minimize online processing and visuals performance.

• Why not D: It uses Import, but refreshing hourly adds unnecessary processing and complexity when daily refresh already satisfies currency needs.

• cloud applications only
• all Web traffic including cloud applications

• Cloud applications only: Only traffic to cloud apps is steered to Netskope for inspection/enforcement; other traffic bypasses.
• All Web traffic including cloud applications: All web-bound traffic, including cloud app traffic, is steered to Netskope.

• Browser isolation, Web traffic only, or a vague “traffic only” option are not the standard two steering modes.
• These two configurations let you decide what traffic Netskope analyzes in real time and what is bypassed.

• The “Answer(s)” field lists B and C (likely incorrect). The explanatory text correctly describes cloud applications only and all Web traffic including cloud applications as the two configurations.

• Ensure that only users who manage the production environment sign in to the Azure portal from a hybrid Entra-joined device and authenticate with MFA.

• Use Microsoft Entra ID Protection (Identity Protection) to enforce MFA enrollment:

• Update the existing Capolicy1 (a Conditional Access policy):

• Identity Protection MFA registration policy ensures users are enrolled in MFA (Box 1 choice).
• CA policy Capolicy1 with aGrant control of “Require MFA” enforces MFA during sign-in (Box 2 choice).
• Both work together with the hybrid-joined device requirement to satisfy the authentication/authorization rules.

• Apply the MFA registration policy to the production-management users.
• Apply the MFA grant to Capolicy1 for those same users/groups.

• A (training data, hyperparameters, stakeholder feedback) focuses on training provenance; these details are important but are typically part of pre-deployment/training records, not the primary post-deployment documentation.
• B (encountered issues, monitoring process, risks) relates to governance and monitoring rather than the core documentation you’d publish about the deployed model itself.
• C (licensing information, the team, business goals) covers governance context but not the technical traceability and performance-based record needed for ongoing maintenance.

• Increase/decrease the number of epochs: Changes how long training runs, but does not reuse a pre-trained model.
• Unsupervised learning: Trains from unlabeled data and does not specifically address adapting an existing model.

• Recovery procedures actually work
• Recovery time and recovery point objectives can be met
• Staff understand their responsibilities
• Contact details, dependencies, and technical configurations are accurate
• Gaps or conflicts exist in the plan

• Not version-controlled: Creates a risk of using an outdated copy, but the plan might still be effective.
• Contact information needs updating: This is a specific weakness that can be corrected, often identified during testing.
• Not approved by senior management: Approval is important for authority and resource commitment, but an untested plan presents the most direct risk that recovery will fail when needed.

• The correct answer is A: CCTV recordings are not regularly reviewed.

• CCTV is a monitoring/control mechanism. If recordings aren’t reviewed, security events (break-ins, policy violations, equipment tampering) can go undetected and unaddressed.
• Regular review is essential for deterrence, incident response, and forensic evidence. Without it, the entire CCTV control provides little value.

• B (records deleted after one year) affects forensic availability, but it’s a data-retention issue rather than the ongoing effectiveness of the surveillance program.
• C (footage not recorded 24x7) creates gaps in coverage, which is a concern, but regular review of available footage still supports detection; 24x7 coverage is a separate policy/perimeter issue.
• D (cameras not in break rooms) is more about privacy and space planning than core data-center security monitoring.

• Mesh: WAPs communicate wirelessly with one another, often to extend coverage without wired connections. It does not specifically describe centralized WLC management.
• Point-to-point: Connects two specific devices or locations.
• Ad hoc: Wireless devices communicate directly with one another without an access point.

• This is a lookup relationship. Salesforce does not cascade access from a child (Opportunity) to its parent (Account) via implicit sharing.
• To view the Account, the user must have explicit access to the Account (via its OWD/sharing, or object permissions).

• The user has Read/View (or higher) on Account via profile/permission set.
• Manual sharing or a sharing rule grants that Account to the user.
• The Account is exposed by a broader permission like View All/Modify All on Account.
• Role hierarchy with Grant Access Using Hierarchies could grant access to Accounts owned by others, if applicable.

• Version control provides a single source of truth for metadata changes and tracks every modification.
• It supports branching and merging, so each feature can be developed in isolation and later merged without overwriting others.
• It allows diffs and conflict resolution, making it easier to manage dependencies across features and ensure a stable release.

• Setup Audit Trail: only logs who/change when something happened; it doesn’t prevent overwriting or manage cross-feature dependencies.
• Change Sets: used to deploy changes between orgs, not to coordinate parallel development or prevent conflicts across ongoing sprints.

• Key concept: ALE = SLE × ARO

• SLE = $15,000
• Occurrences: 2 in 3 years ? ARO = 2/3 per year ˜ 0.6667

• ALE = $15,000 × 0.6667 ˜ $10,000 per year

• ALE is the expected annual loss, so it averages the losses over each year.
• This helps prioritize risk treatments by comparing ALE to the cost of controls.

• Network Security Groups (NSGs) control network traffic to and from Azure resources.
• By applying NSGs to the web tier and the database tier (subnets or NICs), you can:

• NSGs provide the necessary granularity (source/destination, port, protocol) to enforce the desired traffic patterns between tiers.
• For easier management you can use separate subnets for each tier or, optionally, use Application Security Groups to simplify rule management.