Juniper JN0-649 Exam Actual Questions
Enterprise Routing and Switching, Professional (JNCIP-ENT) (Page 5 )

• SageMaker endpoint: Not required because the model is being used through Amazon Bedrock.
• SageMaker Model Registry: Used for managing SageMaker models, not for making a Bedrock custom model available.
• Grant access in Amazon Bedrock: IAM permissions may still be needed, but granting access alone does not provide the required inference capacity.

• Active vs passive: Active assessment involves actively scanning targets by sending probes/packets to identify hosts, services, and vulnerabilities. Passive assessment observes traffic without probing.
• External vs internal: External assessment is about testing from outside the network perimeter; the scenario doesn’t specify external vantage, only that tools are identifying hosts/services across the enterprise network.

• Goal: Guests should not use cameras, but company users can.
• Correct configuration: Guest access settings in the Org-wide settings.

• External access: Controls external-domain communication, not guest capabilities inside Teams.
• Teams settings in Org-wide settings: Too generic; doesn’t specifically target guest capabilities.
• Audio & Video in the default Meeting Policy: Would affect everyone assigned to that policy. To meet the requirement without impacting internal users, you’d need separate policies or guest-specific settings; the exam focuses on the guest-access policy.

• A) MTU mismatch: OSPF neighbors must exchange Hello packets with a compatible MTU. If MTUs differ, the neighbor conversation fails and the adjacency cannot become Full.

• B) Incorrect subnet mask: Routers must be in the same IP subnet on the connected link to form a neighbor relationship. A subnet mismatch prevents Hello packets from being considered valid on the same network.

• D) Area ID not the same: Neighbors must share the same Area ID. A mismatch stops adjacency from forming beyond the 2-Way state.

• E) Different metric set on each end of the link: Cost differences do not prevent OSPF adjacency; they affect routing decisions, not neighbor formation.
• F) Router ID not defined: OSPF can auto-choose a router ID; an undefined ID is not a prerequisite for adjacency to reach Full.

• Sustainability is not a CAF perspective (it's not one of the CAF perspectives).
• Performance efficiency and Reliability are pillars of the AWS Well-Architected Framework, not CAF.

• Correct answer: B — A reservation for the server based on the MAC address.

• Why this is the best choice:

• Why the other options are less suitable:

• Quick takeaway: Use a DHCP reservation to give the file server a fixed IP while still benefiting from centralized DHCP management.

• Why: ADS is designed to collect information about on-premises environments to plan migrations. It inventories details like hostname, IP address, MAC address, OS, hardware, and installed software, plus dependency mappings. This data helps you understand your current environment before moving to AWS.

• How it differs from the other options:

• Practical use: Install the ADS agent on on-prem hosts to collect data, then view the inventory in Migration Hub to inform migration planning and sequencing.

• Self-signed certificate: Causes a certificate warning, not incorrect IP resolution.
• Nameserver record: A DNS record problem would typically affect multiple users, not just one.
• IP helper: Relays DHCP or other broadcast traffic between networks; it does not control website name resolution.

• Correct choice: Box 1 = Yes, Box 2 = Yes, Box 3 = No (Answer: A)

• Box 1: Yes – Microsoft Purview Compliance Manager provides a risk-based compliance score that helps you understand your overall compliance posture. The score reflects how well you’re meeting regulatory requirements and internal policies.
• Box 2: Yes – It also offers step-by-step remediation guidance through actionable “improvement actions.” These guide you to implement fixes and align controls, often with links to the relevant consoles.
• Box 3: No – Compliance Manager is not part of Microsoft Defender. It is part of Microsoft Purview. Defender is a separate security product family, while Compliance Manager is in Purview for compliance risk and remediation.

• Use Purview Compliance Manager to view your compliance score and follow improvement actions.
• Improvement actions provide actionable steps and guidance for remediation.
• Defender and Purview are distinct services; do not confuse their scopes.

• Correct answer: A: The ITIL service value system (SVS).

• The SVS explains how all components (governance, the service value chain, practices, guiding principles, information and technology, partners and resources, and continual improvement) work together to enable value creation from demand to outcomes.

• B: The ITIL guiding principles describe aspirational guidance for decision-making, not how all components/activities interact.
• C: The four dimensions of service management explain areas to consider (organizations/people, information/technology, partners/suppliers, value streams/processes) but don’t describe the integrated system itself.
• D: A service relationship defines the relationship between provider and consumer, not the overall system of components and activities creating value.

• IPsec: Protects traffic at the network layer, commonly for VPNs; it is not WPA2’s authentication protocol.
• SSL: Protects specific application sessions and has largely been replaced by TLS.
• SSH: Secures remote command-line administration.

• Correct answer: S3 Versioning

• Why the other options aren’t suitable for this protection:

• Quick tip: For enhanced protection, enable Versioning (and consider related features like Object Lock for write-once scenarios in specific compliance cases).

• The diagnostic output shows that the protocol is TCP (proto=6) and the session state is 2.
• In FortiGate’s session output, state=2 maps to SYN_SENT. This means the TCP SYN has been sent but the handshake hasn’t completed yet.
• Therefore, the session is not ESTABLISHED, FIN/ACK-related states, or other states; it’s in SYN_SENT.

• The correct answer: B) Synthetic identity theft.

• Synthetic identity theft involves creating a new, forged identity by combining information from multiple real people (e.g., names, dates of birth, SSNs) to commit fraud.
• In the scenario, Adam “created a new identity by obtaining information from different victims,” which matches the idea of synthesizing data to form a fake person.

• Medical identity theft: using someone’s medical information to obtain care or services.
• Tax identity theft: using someone’s personal info to file fraudulent tax returns.
• Social identity theft: impersonating someone to deceive others socially or publicly.

• Look for phrases like “create a new identity” or “combine information from multiple people” to identify synthetic identity theft.

• TCP is connection-oriented. It establishes a connection before data transfer using a three-way handshake (SYN, SYN-ACK, ACK), enabling reliable delivery, ordering, and flow control.

• UDP is connectionless. It sends datagrams without a prior connection and provides no guarantee of delivery, order, or protection against duplicates; any reliability is up to the application.

• B incorrectly states UDP uses acknowledgment packets; UDP has no built-in ACKs.
• C wrongly claims UDP provides reliable transfer and that TCP is connectionless.
• D misstates framing bits; neither protocol uses the listed TCP/UDP handshake bits in frames.

• Correct answer: D) Amazon Aurora Serverless

• Aurora Serverless is serverless, so compute capacity scales automatically and can pause during idle periods. This minimizes ongoing administration and you pay only for actual usage, which is ideal for infrequent workloads.
• PostgreSQL on EC2 requires full OS and DB administration.
• RDS for PostgreSQL is managed but still involves provisioning capacity and some maintenance tasks.
• Aurora PostgreSQL (non-Serverless) is managed but requires you to manage capacity, though with some automation; it’s not as hands-off as Serverless for intermittent usage.

• L2TP uses UDP port 1701 for the L2TP control channel.
• The destination port is 1701; the source port is a dynamically chosen ephemeral port on the client (not 1701).
• Therefore the statement that both source and destination ports are 1710 is incorrect (and 1710 is not the standard L2TP port).

• The destination port should be 1701, not 1710.
• The source port should be an ephemeral port chosen by the client, not 1701.

• Basic: billing/subscription support only; no technical support requests can be opened.
• Developer, Standard, Professional Direct, and Premier: include technical support and allow opening new support requests.

• If option A corresponds to “Developer, Standard, Professional Direct, Premier,” that is the correct choice.
• If the option text is really “Premier only,” that would be incorrect per current Azure docs.

• To get min/max per column, you need column profiling. That’s provided by enabling the column profile.
• To actually see those min/max values, you should show the column profile in the details pane, and you also need the details pane itself enabled so you can view it.

• Enable column profile (B)
• Show column profile in details pane (C)
• Enable details pane (E)

• Show column value distribution (D) shows distribution shape but isn’t required to get min/max.
• Show column quality details (D) deals with data quality metrics, not min/max.

• Global Unicast: These are the IPv6 addresses that are globally routable on the Internet. They’re allocated by Regional Internet Registries (RIRs) and can be reached from anywhere with proper routing (similar to IPv4 public addresses). Example ranges include 2000::/3.

• Link-local: fe80::/10. Used only on the local link; not routable beyond the directly connected network.

• Unique Local Addresses (ULA): fc00::/7. Private addresses for internal use within an organization; not publicly routable on the Internet (like IPv4 private addresses).

• Multicast: ff00::/8. One-to-many addresses used for group communication, not unicast routing.

• Correct answer: enable SLAAC on an interface (C)

• Why the other options are not correct:

• The connecting host keeps the private key securely.
• The destination host stores the corresponding public key in its authorized keys.
• Authentication can occur without a person entering credentials each time.
• SSH also provides encrypted communication and host authentication.

• Biometric: Requires a human user and is difficult to automate.
• Smart card: Often requires user interaction or card access.
• Hard-coded password: Unsafe because passwords stored in scripts or applications can be exposed, reused, or difficult to manage securely.

• It is a sequence of distinct phases that flow one after another (requirements ? design ? implementation ? verification ? maintenance).
• Requirements are defined up front and changes are costly; the project often requires formal sign-off before moving to the next phase.
• It emphasizes heavy documentation and minimal iteration after a phase is completed.

• Context: You’re configuring a Windows Autopilot deployment profile (Profile1) for Windows 11 devices. The hotspot asks you to pick the correct behavior for two statements based on the profile’s settings.

• Box 1: “can modify the desktop settings only for themselves”

• Box 2: “Cortana settings” with options like computer name, keyboard layout, etc.

• In Spark, an executor is a JVM that can have multiple cores. Each task can consume some CPUs (spark.task.cpus).
• The executor’s resources are effectively partitioned into slots, where each slot can run one task. The number of slots per executor is roughly spark.executor.cores / spark.task.cpus.
• Therefore, multiple tasks can run in parallel within the same executor (via these slots). So the statement “Tasks run in parallel via slots” is correct.

• A: A slot is not another name for an executor; a slot is a unit inside an executor.
• B: There’s no requirement that there must be fewer executors than tasks; tasks can be scheduled over time across the available slots.
• C: An executor can run more than one core; it’s not limited to a single core.
• D: There isn’t a rule that there must be more slots than tasks; tasks can wait if slots aren’t available, and you can have equal or even fewer slots than concurrent tasks.

• Equipment and hardware
• Facilities
• Inventory
• Backup media
• Supplies stored at an alternate or remote location

• Personal belongings of staff: Usually not organizational assets.
• DR line-item revenues: Revenue is a financial impact, not a physical asset.
• Cloud-based applications: These are primarily logical or information-processing assets, even though they depend on physical infrastructure.

• Key difference: DirectQuery leaves data in the on-prem SQL Server and queries it live. That means every visual request can trigger online processing on the source, which can be slower and adds load on the on-prem system. In contrast, Import loads data into the Power BI data model, so visuals render from the in-memory engine (faster).

• Why that helps with the requirements:

• Why not A or B: Both rely on live data via DirectQuery, which contradicts the goal to minimize online processing and visuals performance.

• Why not D: It uses Import, but refreshing hourly adds unnecessary processing and complexity when daily refresh already satisfies currency needs.

• Why: A multi-modal embedding model maps both text and images into a shared vector space, enabling cross-modal similarity and retrieval (e.g., find images matching a text query or text matching an image).

• What it does: Enables efficient similarity search using a vector database or nearest-neighbor indexing.

• Why the other options aren’t suitable:

• Quick implementation note: you’d typically pair the embeddings with a vector store (e.g., ANN index) and possibly fine-tune on domain data for better alignment across modalities.

• Numerical flexibility: Adjusting the number of employees, such as using temporary, part-time or contract staff.
• Temporal flexibility: Varying when employees work, such as through flexitime, overtime or different working hours.
• Shift system flexibility: Changing work patterns or shift arrangements; it is not specifically about moving between tasks.

• En Cisco SD-Access, el fabric overlay se extiende hasta lo inalámbrico; los APs son nodos de borde del fabric y su tráfico queda dentro del overlay.
• El cliente inalámbrico genera tráfico que viaja por el overlay, pero no es un componente del fabric en sí.
• El WLC es principalmente una herramienta de gestión y control, no forma parte del overlay; el underlay es el transporte físico.

• Phishing can map to two MITRE ATT&CK tactics depending on the attacker’s objective.

• Therefore, phishing isn’t confined to a single tactic; it can serve both Reconnaissance and Initial Access, which is why option D (Reconnaissance, Initial Access) is correct.

• A. Implement retries with exponential backoff

• C. Reduce the frequency and/or size of requests

• B. Use PutRecord instead of PutRecords — PutRecord sends one record per call and does not remove the underlying throughput limitation. It may increase request overhead.
• D. Use Amazon SNS instead — SNS is not a direct fix for Kinesis shard throttling and changes the required streaming architecture.
• E. Reduce KCL consumers — KCL consumers read from Kinesis; they do not solve producer-side PutRecords throttling.

• Answer: No

• Why: Using several Azure AD directories (tenants) would create separate identity stores for each division, which significantly increases administrative overhead. You’d need cross-tenant access management, separate governance, and duplicated admin efforts, which goes against the goal of minimizing administrative work.

• How to meet the goal instead:

• Correct choices: A and D.

• Why not B, C, or E?

• App Tag: a label that reflects the app’s enterprise readiness based on its Cloud Confidence Index (CCI) rating. It lets you quickly group apps (e.g., Poor, Average, Good) for policy decisions.
• App Score: a numeric value representing the CCI score. It provides a precise threshold you can use to enforce policies (e.g., block apps with Score below 50).

• You can create policies that block or restrict apps with a Poor App Tag or with an App Score under a chosen threshold.
• These two aspects let you filter cloud apps by CCI ratings during policy evaluation.

• CCL isn’t described as a real-time policy facet in this scenario.
• GDPR Readiness is a separate consideration and not the two CCI aspects used for real-time protection policy in this context.

• Source: on-premises SQL Server Database1
• Destination: Fabric Warehouse Warehouse1
• Connectivity: on-premises data gateway

• Dataflow Gen1: Primarily for Power Query transformations and isn’t the best Fabric-native choice for this copy operation.
• KQL queryset: Queries data; it does not orchestrate copying from SQL Server.
• Notebook: Could perform custom code-based movement, but it is unnecessary and less direct than a pipeline.

• Transact-SQL (T-SQL) is used to query relational data in Azure SQL Database, not telemetry data from monitoring services.
• To analyze monitoring data from Azure SQL Database Intelligent Insights and Azure Application Insights, you should use the Kusto Query Language (KQL) in Azure Monitor Logs/Log Analytics (and in Application Insights Analytics).
• Using KQL lets you query telemetry tables such as requests, dependencies, pageViews, and customEvents (from App Insights) and any integrated monitoring data you’ve ingested into Log Analytics.

• Ensure Intelligent Insights and Application Insights data is available in a Log Analytics workspace or accessible via Application Insights Analytics.
• Go to Azure Monitor > Logs (or Application Insights > Analytics) and write KQL queries, e.g.:

• Help the team identify the causes of delays.
• Encourage continuous improvement through retrospectives.
• Support the team in changing its process, tools, or collaboration methods.
• Help remove impediments that the team cannot resolve independently.

• A: An impediment log may help, but simply maintaining it does not ensure the impediments are resolved.
• B: Directing the team to solutions conflicts with agile self-management.
• C: Adding impediments to the product backlog could delay their resolution and treats them like product features.

• Correct answer: A. Email templates

• Snippets are reusable content blocks that you insert into email content, and they require an email template (or at least an email draft) to render.
• You can store region-specific footers as snippets and include them in a template, but there would be nothing to render the snippet into without a template.
• The other options aren’t prerequisites for using snippets:

• runParallel is defined as async, so it returns a Promise.
• To use the result, you attach a then handler (or use await inside another async function).

• A: “Async runParallel() .then(data);” is invalid. “async” is a keyword for function declarations, not something you put in front of a call, and you’d need a function as the then-argument.
• B: “runParallel().done(function(data){return data;});” .done is not standard in native Promises (it exists in some libraries). Without a compatible library, this won’t work.
• C: “runParallel().then(data);” is invalid because then expects a function as its argument; data is not a function.
• D: “runParallel().then(function(data){ return data; });” is valid (or equivalently, runParallel().then(data => data);).

• The robust, standard option is D.
• B could work only with a library that provides .done; otherwise it’s not reliable.

• Network Security Groups (NSGs) control network traffic to and from Azure resources.
• By applying NSGs to the web tier and the database tier (subnets or NICs), you can:

• NSGs provide the necessary granularity (source/destination, port, protocol) to enforce the desired traffic patterns between tiers.
• For easier management you can use separate subnets for each tier or, optionally, use Application Security Groups to simplify rule management.

• C — Schema.describeSObjects(new String[]{myObject})[0].fields.getMap()

• D — Schema.getGlobalDescribe().get(myObject).getDescribe().fields.getMap()

• A: sObjectType is not used this way, and fieldSet() is not the appropriate method for retrieving all fields.
• B: mySObject.myObject is not valid dynamic Apex syntax.

• Correct answer: A. Inbound data transfer from the internet

• Why: AWS does not charge for data transferred into AWS from the internet. Inbound data transfer is free, regardless of the amount (in this case, 2 TB). The other options involve data leaving AWS or moving between AWS regions/AZs, which incur costs:

• Why this is correct: In Azure Virtual Desktop, user access to a host pool is controlled through App Groups. The default app group for a host pool publishes the full desktop, so adding members to that app group grants them sign-in and access to the desktop (and any RemoteApps in that group). This is the standard way to give users access to AVD resources.

• Why the other options are not correct:

• Practical steps (high level):

• A. Flash the BIOS: Not the first move. A BIOS update can be risky when POST is failing. It’s better to first rule out simpler causes (like RAM seating). BIOS flashing is usually done if the CPU isn’t supported by the current BIOS, which you’d check after RAM seating.

• B. Check the CMOS battery: Possible but unlikely the immediate cause. CMOS battery issues would more likely cause BIOS settings to reset or clock problems. RAM seating is a more common, direct fix after a motherboard swap.

• D. Reinstall the old motherboard: Not a troubleshooting step for the new system. The goal is to get the new motherboard to POST, not revert to old hardware.

• C. Reseat the RAM: Correct because memory seating problems are the most common cause of POST failures after a motherboard swap. Re-seating ensures proper contact in the new board’s slots.

• Actual filename: Document.xml.txt
• Explorer displays: Document.xml
• File type: Text Document (.txt)

text 
Document.txt ? Document.xml

• RPO (Recovery Point Objective) — maximum acceptable data loss, measured in time. It specifies how far back in time you can tolerate data loss. Example: RPO of 2 hours means backups must occur at least every 2 hours.

• ARO (Annualized Rate of Occurrence) — expected frequency of a threat occurring per year. It estimates how often a risk is likely to happen on average (used in risk calculations).

• MTTR (Mean Time To Recover) — average time to recover/restore service after an incident. It includes detection, repair, and restoration time, and helps gauge downtime and alignment with RTO.

• The correct permission is Manage Sandboxes (the official Salesforce name; the option in the list is written as “Manage Sandbox,” which is effectively the same idea but the canonical name uses the plural).
• Why: Sandboxes are a lifecycle feature. Only users with the explicit Manage Sandboxes permission can perform create, delete, refresh, or activate actions.
• Why the other options aren’t correct:

Why B works

• AWS KMS keys are Regional resources. A normal customer managed key in Region A cannot be used directly in Region B.
• A customer managed multi-Region KMS key (MRK) has related key replicas in both Regions. The replicas share key material and key ID, although each has a Regional ARN.
• With client-side encryption, the application encrypts the data before storing it in S3. Cross-Region replication then copies already-encrypted objects, so S3 does not need to decrypt and re-encrypt them with a different Regional key.

Why the other choices are weaker

• A and C: SSE-S3 uses Amazon-managed S3 keys, not the required customer managed KMS key.
• D: SSE-KMS can work only if the solution creates and configures the appropriate KMS key or multi-Region key replica in each Region. As written, it says to create a customer managed KMS key in each Region, which implies separate keys—not the same KMS key. Replication also requires additional KMS permissions and destination encryption configuration.