A distribution company is implementing Dynamics 365 Supply Chain Management.The company plans to expand into providing trucking services for its primary distribution center. The company may expand into other locations later.All vehicle maintenance will be performed at standardized intervals to meet trucking regulations.The vehicles must be established on the maintenance schedule at the distribution center. The fleet manager requires all vehicles to be grouped together by location for the distribution center and by sublocations for any hubs.The company requires the following implementation:Sublocations must inherit the maintenance schedule.Non-vehicle assets must not inherit the maintenance schedule.You need to configure the system to meet the requirements.What should you configure?
Answer(s): D
Functional location types are used to manage requirements for functional locations, including how assets are installed on a functional location. You can set up asset types, maintenance plans, functional location attributes, and asset attribute requirements to be used on a functional location that uses the specific functional location type. When you create a functional location, the functional location type is mandatory.NoteIn order to work with functional locations, you must create a default functional location to be used only for the purpose of creating new assets. For that default functional location, you should create a default functional location type that is really simple and allows multiple assets to be installed on the default functional location.Note 2On the General FastTab, you can get an overview of the number of asset types, maintenance plans, asset attribute requirements, permitted types, attributes, and functional locations set up on the functional location type.Incorrect:Not B:Asset service levels are related to assets, and are transferred to maintenance requests and work orders. They are used to calculate the priority of work orders during work order scheduling. Asset service levels can be changed, if changes are required.You must set up at least one default record for the asset service level. This default record is used if no other match is found during work order scheduling.Example 1: The default service level that is used if no other match is found. In this record, you select only a service level.Example 2: A high service level that is used to schedule jobs for a Volvo truck engine. In this record, you select a relevant asset type (such as Truck Engine), a manufacturer (Volvo), and a service level.Not C:Counters are used to create registrations on an asset, such as registrations about the number of hours that the asset has been in operation or the quantity that has been produced.
https://learn.microsoft.com/en-us/dynamics365/supply-chain/asset-management/setup-for-functional-locations/ functional-location-types
A company uses Dynamics 365 Supply Chain Management.Products must be classified.You need to create the ABC model.Which three ABC codes should you configure? Each correct answer presents part of the solution.Note: Each correct selection is worth one point.
Answer(s): A,B,E
A: ABC code for carrying cost classificationA classifier that names categories in an ABC classification that ranks discrete categories of items according to their carrying cost.B: ABC code for revenueA classifier that names categories in an ABC classification that ranks discrete categories of items according to their revenue.E: ABC code for contribution marginA classifier that names categories in an ABC classification that ranks discrete categories of items according to their contribution margin.
https://learn.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/abc-code-for-carrying-cost-classification https://learn.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/abc-code-for-revenue https://learn.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/abc-code-for-contribution-margin
A distribution company wants to set up barcodes in their Dynamics 365 Supply Chain Management system for warehouse scanning.Barcodes will be entered manually.You need to minimize the risk of errors on barcode entry.What should you do?
Answer(s): C
To minimize the risk of errors on barcode entry in Dynamics 365 Supply Chain Management, you should create a new barcode, enter the value, select the type, and enter the mask. A mask specifies the format for the barcode, ensuring that only barcodes adhering to the defined structure are accepted. This reduces the chance of incorrect data entry by enforcing a predefined standard for barcode format.
HOTSPOT (Drag and Drop is not supported!)A company is configuring Dynamics 365 Supply Chain Management.The company plans to configure the system to enter the following two fields when a single scan is conducted:item id and batch number.You need to configure the bar codes.Which configuration should you use for each action? To answer, select the appropriate options in the answer area.Note: Each correct selection is worth one point.Hot Area:
Answer(s): A
Box 1: PrefixDesignate the field in the bar codeConfiguration of bar code scanner hardware and softwareFor Supply Chain Management to correctly recognize and decode GS1 bar codes, the hardware scanner or supporting software must be configured to perform the following actions:*-> Add a prefix to the scanned bar codes, so that the system can recognize a GS1 bar code.* Convert the nonprintable ASCII group separator character (ASCII code 29 or hexadecimal code 1D) to a printable character, such as a tilde (~).Box 2: Bar code data policyAssociate the field to the mobile device menu itemSet up bar code data policies for mobile device menu itemsThe purpose of the GS1 standard is to enable workers to load several values when they scan a single bar code one time. To achieve this purpose, logistics managers must set up bar code data policies that tell the system how to interpret multi-value bar codes. Later, you can assign policies to mobile device menu items to control how a bar code will be interpreted when workers scan it while they're using a specific menu item.Assign bar code data policies to mobile device menu itemsBy default, all mobile device menu items provide input fields where workers can scan a single value, according to the generic bar code data setup. If you want workers to be able to scan more than one field value in a single scan for any mobile device menu item, you must assign a bar code data policy by following these steps.1. Go to Warehouse management > Setup > Mobile device > Mobile device menu items.2. Create or open a menu item.3. On the General FastTab, set the Barcode data policy field to the policy that applies to the menu item.
https://learn.microsoft.com/en-us/dynamics365/supply-chain/warehousing/gs1-barcodes
HOTSPOT (Drag and Drop is not supported!)A company is implementing Dynamics 365 Supply Chain Management for its supply chain operations.The company must streamline its inbound operations by scanning a barcode from a vendor to identify the weight and expiration date of a product. Not all vendors will support this barcode functionality.You need to configure the system to recognize the unique barcodes from the vendors and parse the appropriate information.Which configurations should you use? To answer, select the appropriate options in the answer area.Note: Each correct selection is worth one point.Hot Area:
Box 1: GS1Select the new barcode standard typeDynamics 365 Supply Chain Management uses the GS1 barcode standard type to capture multiple data elements, such as weight and expiration date, from a single scan.Box 2: ASCII group separator characterConfigure to automatically identify that the barcode is the new standard scanDynamics 365 Supply Chain Management uses GS1 barcodes and Application Identifiers (AIs) with special control characters like the ASCII Group Separator (GS) (ASCII 29) to automatically extract multiple data elements (product ID, batch, expiration, weight) from a single vendor barcode, making advanced scanning efficient. You configure this by setting up GS1 policies and linking them in mobile device menu items, telling D365 SCM how to interpret the AIs (like 01 for GTIN, 10 for Batch, 17 for Expiration) within the scanned data stream.
Post your Comments and Discuss Microsoft MB-330 exam prep with other Community members:
Our website is free, but we have to fight against AI bots and content theft. We're sorry for the inconvenience caused by these security measures. You can access the rest of the MB-330 content, but please register or login to continue.