NABP FPGEE Exam Prep
Foreign Pharmacy Graduate Equivalency Examination (Page 40 )

• A private IP address on the virtual network
• A public IP address associated with its IP configuration

• B — Prompts and suggestions retained for 28 days
• C — User engagement data kept for two years

• The key distinction is between content data—your prompts, code context, and generated suggestions—and engagement data, such as usage activity.
• Do not confuse retention with training: enterprise Copilot data is generally not used to train GitHub’s models without appropriate authorization.
• For a current exam, verify the policy version cited by the exam provider. The key’s C is likely correct, but B should be treated cautiously and may no longer reflect the current policy.

• In the source query: apply UPPER() or LOWER() to the column.
• In Power Query Editor: use Text.Upper or Text.Lower on the column, then load.

• This fixes the root cause when comparisons/joins depend on case.
• In DirectQuery, transformations are pushed to the source or query layer; ensure the transformation is supported by your data source/connector.
• After normalization, verify relationships and any downstream visuals that rely on that column.

• Replace the keyboard: More expensive and unnecessary before simpler causes are ruled out.
• Replace the key switch: Laptop keyboards generally aren’t designed for individual switch replacement.
• Replace the circuit board: Excessive for a single nonworking key and not a cost-effective first step.

• A Layer 2 switch checks the destination MAC address in its MAC address table (CAM table).
• If the destination MAC is unknown, the switch cannot select a specific outgoing port.
• It therefore performs unknown-unicast flooding, sending the frame out every other port in that VLAN.
• The frame is not sent back through the port where it arrived.

1. Selling price per unit: $750
2. Required annual return:

1. Required profit per unit:

1. Target cost per unit:

• If the Facebook user is new, Salesforce invokes createUser.
• If the user already exists, Salesforce can invoke updateUser.
• The handler can read the latest data from Facebook, such as name, email, or other profile attributes, and update the corresponding Salesforce user.

• B: A scheduled job is unnecessary and would not provide real-time synchronization during authentication.
• C: A Facebook signed request is not the standard mechanism for updating Salesforce user records in this authentication-provider setup.
• D: SAML Just-in-Time provisioning applies to SAML identity providers, not Facebook OAuth authentication.

• The user starts in the corporate portal.
• The portal launches the Salesforce resource.
• The IdP sends the SAML response to Salesforce.

• Connected App + OAuth is for OAuth authorization and API/app access, not this SAML-based seamless login scenario.
• SP-initiated SSO would begin when the user first requests the Salesforce resource and Salesforce redirects them to the IdP. That is not the described starting point.

• B — Single customer login across properties: Customer 360 Identity provides centralized identity services, allowing an organization to recognize a customer across multiple digital properties and applications. This helps UC understand authenticated activity as part of a broader customer identity.

• C — Multi-brand support: Customer 360 Identity can support multiple brands and user experiences. Identity services can remain centralized while correlating a customer’s activity across different corporate brands or channels.

• A: Customer 360 Identity does not automatically populate all data into Customer 360 Data Manager and Customer 360 Audiences. Integration and data configuration are still required.
• D: Tracking anonymous activity and linking it after sign-up may be possible through broader customer-data and tracking implementations, but it is not the primary Customer 360 Identity benefit tested here. Identity focuses mainly on authentication, registration, and cross-property identity correlation.

• MFA verifies a user’s identity using additional authentication factors, such as a phone prompt or security token.
• It helps prevent unauthorized access even if a password is compromised.
• It does not provide secure storage or encryption of credentials used during automated deployment.

Flat organisation

• Few levels of management
• A wide span of control—managers supervise many employees
• Shorter communication channels
• More employee autonomy and quicker decisions
• Fewer formal promotion levels

Tall organisation

• Many levels of management
• A narrow span of control—managers supervise relatively few employees
• A clear hierarchy and reporting structure
• More formal supervision and communication channels
• More obvious promotion and career stages

• Correct answer: A
• What this is saying: You need to write a Transact-SQL query that uses REGEXP_SUBSTR to extract the ID from MessageText, and you should apply STRING_ESCAPE(MessageText, 'json') before calling REGEXP_SUBSTR.

• MessageText may contain JSON characters (quotes, backslashes, etc.). Escaping the JSON content first ensures the string you pass to the regex is safe and won’t confuse the regex engine.
• The pattern you apply with REGEXP_SUBSTR would then extract the first substring that matches your ID pattern from the (escaped) text.

• Example (conceptual):

• The question implies REGEXP_SUBSTR is available in this environment; some SQL Server and Fabric contexts don’t expose it natively in all versions. If REGEXP_SUBSTR isn’t available, you’d need an alternative approach (e.g., using built-in regex-like capabilities or CLR/UDFs).
• If you need the ID specifically from the first paragraph, you might first isolate the first paragraph and then apply REGEXP_SUBSTR, or compose a single pattern that anchors to the first paragraph.

• Honeypots: Decoy systems or services designed to attract attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of unauthorized activity. Security teams can also observe attacker behavior.

• DNS sinkhole: Redirects requests for known malicious domains to a controlled internal server or blocks them. If an infected workstation attempts to contact command-and-control infrastructure, the sinkhole records the request and helps identify the compromised device.

• Tokenization: Protects sensitive data by replacing it with tokens.
• CI/CD: Automates software development and deployment.
• Threat modeling: Identifies potential risks before or during system design.
• Data obfuscation: Makes data harder to understand, but does not detect intruders.

• Azure creates a corresponding service principal in Microsoft Entra ID.
• The identity’s lifecycle is tied to the Azure resource.
• If the resource is deleted, Azure automatically deletes the identity.
• Only the associated resource can use that identity to request tokens.
• You can grant the identity permissions to access services such as Key Vault or Storage without storing credentials in code.

• Copilot??????????
• ???????????????
• ??????????
• ?????????????
• ???????????????????

• Prompts and Suggestions: Retained for 28 days
• User Engagement Data: Kept for Two Years

• Answer: C – netstat -an

• netstat -an lists all active connections and listening ports with numeric addresses, without resolving names. This lets you spot DoS patterns such as a flood of connections to a specific port or many connections from a single or few IPs.
• The other options don’t help as directly:

• Windows: netstat -an and look for numerous ESTABLISHED connections to a service or many SYNs to a port.
• Filter by port, e.g., netstat -an | findstr :80, or on Linux: ss -tunap | grep ':80'.

• Netstat provides a snapshot. DoS detection often benefits from continuous monitoring, flow data, and IDS/IPS logs.

1. Create a custom Sensitive Information Type (SIT) in the Microsoft Purview portal.
2. Use a regular expression to match the 32-character alphanumeric account number.
3. Reference that SIT in the DLP policy protecting SharePoint Online.

• Format-based data ? custom SIT with RegEx
• Built-in sensitive data ? Microsoft-provided SIT
• Document classification/protection ? sensitivity labels
• Security investigation queries ? Advanced Hunting, not DLP detection

• Review the risk register.
• Use the previously defined risk response plan, such as assigning a backup resource, reprioritizing work, or using another qualified engineer.
• Implement the response promptly because the task is on the critical path.

• B: Revising the schedule without first applying the planned response may be premature.
• C: Excluding a required task could compromise the project’s objectives and requirements.
• D: Updating the risk and lessons learned records is appropriate, but it should happen after managing the immediate issue, not as the next primary action.

• 25 — Traditional SMTP server-to-server mail transfer; not normally used for secure client submission.
• 110 — POP3, used to retrieve email and typically unencrypted.
• 143 — IMAP, used to access email and typically unencrypted.

• vSmart controls the overlay control plane. It uses OMP to exchange routing information, distribute policies, and determine how WAN Edge devices reach one another.
• vManage is the centralized management and configuration platform.
• vBond is the orchestrator. It helps devices authenticate, discover controllers, and traverse NAT during onboarding.
• APIC-EM is not the SD-WAN control-plane component described here.

• Define the contractor’s deliverables, responsibilities, acceptance criteria, and deadlines.
• Agree on a reporting cadence to monitor progress.
• Allow the local company to use its expertise and manage its own work.

• A: “Under the supervision of the project manager” suggests excessive direct control and is less empowering.
• B: Micromanaging prevents the contractor from functioning independently and is inefficient.
• D: Deploying the contractor’s staff under the PM’s supervision creates a staffing/control arrangement rather than empowering the contracted company.

• Which Security policy matches
• Which NAT rule/translation is selected
• Which PBF rule applies
• Which route is used

text 
test security-policy-match ... 
test nat-policy-match ... 
test pbf-policy-match ... 
test routing fib-lookup ...

• Create and manage catalogs of approved IT services
• Govern and publish infrastructure-as-code (IaC) templates, commonly AWS CloudFormation templates
• Control which users can deploy specific products and configurations
• Apply versioning, permissions, and deployment constraints

• AWS Resource Explorer: Searches and discovers AWS resources; it does not govern IaC templates.
• AWS Organizations: Manages multiple AWS accounts, policies, and consolidated billing.
• AWS Systems Manager: Helps operate and manage deployed resources, such as patching and automation, but is not primarily a catalog for governed IaC products.

• The correct setting to configure is the Enrollment Status Page (ESP) profile.
• Why: ESP tracks the enrollment progress and logs during Autopilot provisioning. You can enable log collection within the ESP policy so that, if ESP times out, the user can collect and share the logs with support.
• Optional enhancement: In the ESP policy (or the Autopilot diagnostics settings), you can enable:

• Automatic enrollment settings: control how devices auto-enroll, not log collection.
• Windows Autopilot deployment profile: controls deployment steps but not ESP log collection.
• Device configuration profile: applies settings but doesn’t provide ESP log collection mechanics.

• In Microsoft Teams Phone System, a single Auto Attendant can handle multiple time-based greetings by using separate schedules for office hours, after hours, weekends, and holidays.
• You can configure one Auto Attendant with four distinct greetings mapped to:

• Open the Teams admin center > Voice > Auto attendants, edit or create an Auto Attendant.
• Under Time-based routing, define four rules:

• Create a Holiday schedule with the relevant dates (e.g., Easter, Christmas) and assign the Holiday greeting.
• Save the configuration.

• If your environment cannot separate weekend from after-hours within a single Auto Attendant, you might technically need more than one Auto Attendant.

• staff use the new system;
• transactions and reports are checked;
• problems are corrected;
• feedback is collected.

• Phased changeover: different parts or functions are introduced in stages, often according to a planned sequence.
• Pilot changeover: one representative department, branch or group acts as a test site before wider implementation.
• Parallel changeover: old and new systems operate at the same time.
• Direct changeover: the old system is stopped and the new one starts immediately.

• Looking up accounts, contacts, and opportunities
• Logging calls and updating Salesforce records
• Accessing previously available customer information when temporarily offline

• Salesforce Touch App: Primarily an older tablet-focused experience, not the best general solution for the sales team.
• Custom hybrid app: Unnecessary development when Salesforce provides the required capabilities natively.
• SalesforceA: Intended mainly for Salesforce administrators, not sales representatives.

• Application management: Controls which apps can be installed or used; it does not remove existing data after theft.
• Full-disk encryption: Protects data when the device is powered off or locked, but it may not help if the attacker has already unlocked the device.
• Containerization: Separates corporate data from personal data, but the attacker may still access the corporate container using the stolen credentials.

• Leaf switches provide access ports for servers, endpoints, and other devices.
• Spine switches form the fabric’s backbone.
• Every leaf connects to every spine, creating a predictable, high-bandwidth, low-latency path.

• A: Adding both a spine and leaf is unnecessary for simply adding access ports.
• B: Adding a spine does not directly provide endpoint access ports.
• D: A single connection to one spine creates a bottleneck and a single point of failure.

• A is correct: Days beyond the included period incur an extra daily charge.
• D is incorrect: Daily use after 10 days is not free.
• B and C: Data-transfer pricing can depend on the direction and service terms. The exam’s intended distinction is that the included device usage period is the clearly stated no-cost benefit.

• ARP poisoning: Redirects or intercepts local network traffic; it would more likely affect communication paths or cause man-in-the-middle behavior.
• Jamming: Interferes with wireless signals. The scenario does not indicate a wireless outage.
• Kerberoasting: Attempts to obtain service-account password hashes from Kerberos; it is a credential attack, not typically a direct service outage.

• B: Moving the task may affect the critical path and should not be done before evaluating the planned response and impacts.
• C: Excluding a required task is not appropriate without formal analysis and stakeholder approval.
• D: Lessons learned and the risk log should be updated, but only after or alongside managing the immediate issue; updating them is not the first action.

kusto 
Event | where EventType == "error"

• == is the KQL equality operator.
• -eq is a PowerShell operator, not KQL.
• is is not the correct equality operator in this context.

text 
Event | where EventType –eq "error"

• Event | search "error" — valid, broad search.
• search in (Event) "error" — valid, broad search.
• Event | where EventType == "error" — valid, targeted filter.

• Customize Opportunity Contact Role

• Add the Opportunity Contact Role related list to the Opportunity page layout

• Campaign Member Role relates contacts or leads to campaigns, not opportunities.
• Campaign Member related list would expose campaign participation, not the stakeholders for the opportunity.
• Customize Campaign Role also concerns campaigns.

• Two VMs
• Distributed across two separate availability zones

• A. Number ? Decimal — Correct. Salesforce Number fields are represented in Apex as Decimal.
• D. Date/Time ? Datetime — This is correct conceptually, but “Dateline” is not an Apex type. If the option literally says “Dateline,” it is incorrect.
• E. Checkbox ? Boolean — Correct. A checkbox contains true or false.

• Number ? Integer — A Number field maps to Decimal, even when its scale is zero.
• Text Area ? List<String> — A text area maps to a single String, not a list.

• Amazon S3 — Object storage, not a database.
• Amazon DynamoDB — Fully managed NoSQL key-value and document database.
• Amazon Redshift — Managed data warehouse designed for analytics, not primarily transactional MySQL workloads.

• Incidents & alerts — see how the phishing activity was detected, correlated, and investigated.
• Threat Explorer — search for the malicious messages, recipients, URLs, attachments, and campaign activity.
• Email and collaboration reports — assess how many users or messages were affected.
• Remediation details — verify whether messages were quarantined, removed, or otherwise contained.

• Microsoft 365 admin center — general tenant administration.
• Microsoft Entra admin center — identity and access management.
• Exchange admin center — mail-flow and Exchange configuration, rather than full phishing-incident investigation.

• Planning – identifying the need, objectives, scope and resources.
• Analysis – understanding business requirements and current problems.
• Design/development – determining how the system will work.
• Implementation – installing the system and putting it into operation.

• Aggregation happens once, during the scheduled job.
• Dashboard users query a relatively small, precomputed table.
• Repeated users do not trigger expensive aggregations against the detailed sales table.
• Overwriting is appropriate because the summary is rebuilt for the reporting period.

• B: Structured Streaming is unnecessary for data that only needs daily refreshes and adds operational/compute overhead.
• C: A view recomputes the aggregation at query time, increasing latency and query cost.
• D: Delta caching may improve reads but does not replace the need to materialize the expensive aggregation, and cache availability is not the main design guarantee.

• Virtual machine disks
• Databases
• Storage accounts
• File systems

• Site-to-site VPN: protects data moving between networks
• HTTPS: protects data moving between a client and website
• Encrypted email: generally protects the message while being transmitted

• At rest = stored data
• In transit = moving data
• In use = data currently being processed by a system

• The legacy system creates a signed JWT assertion.
• Salesforce validates the assertion using a certificate configured on a Connected App.
• Salesforce issues an access token for the integration user.
• No refresh token is required; the system can request a new access token when needed.

• Web Server Flow: normally uses a client secret and authorization/refresh tokens.
• Username-Password Flow: requires storing Salesforce credentials and is discouraged for integrations where stronger options are available.
• User Agent Flow: intended for user-interactive applications, not unattended server-to-server processing.

• netstat: Shows local network connections and listening ports, but not which WAN path carries the traffic.
• nslookup: Resolves domain names to IP addresses.
• ping: Tests reachability and latency but does not show the route.

cmd 
powershell.exe -ExecutionPolicy Bypass -File C:\Scripts\Configure-VM.ps1

• GPO logon script: Runs only when a user logs on, so configuration may be delayed and is user-dependent.
• GPO startup script: Can work, but requires the VMs to be domain-joined and introduces GPO dependency. It is not specifically tied to Windows deployment.
• Place scripts in a VHD: Merely makes the files available; it does not execute them.

• Options:

• Answer: The correct choice is A (800-61r3).

• NIST SP 800-61 Rev. 3 is the dedicated guide for incident handling/response and reflects the latest guidance on the incident response lifecycle (preparation, detection/analysis, containment, eradication, recovery, post-incident activity).
• 800-61r2 is an older revision of the same incident response guide.
• 800-53 covers security and privacy controls, not a specific incident response standard.
• 800-171 focuses on protecting CUI in non-federal systems and networks, not incident response guidance.

• Árvores de decisão: usam regras sequenciais, como “se característica X > valor, siga para este ramo”. São fáceis de visualizar e explicar. Atendem bem a problemas de classificação e regressão com alta interpretabilidade.

• Regressão linear: prevê um valor numérico contínuo, como preço, custo ou temperatura. Não é a escolha principal para classificar genes em categorias.

• Regressão logística: calcula a probabilidade de uma categoria. Pode atender à classificação, inclusive multiclasses, mas sua explicação costuma ser menos intuitiva que uma árvore para documentar decisões.

• Redes neurais: atendem a tarefas complexas, como imagens, texto e padrões não lineares. Porém, são menos interpretáveis, funcionando mais como uma “caixa-preta”.

• Entradas grandes, de até aproximadamente 1 GB.
• Processamentos demorados, que podem levar até cerca de 1 hora.
• O cliente envia a solicitação e consulta o resultado depois, sem precisar manter uma conexão aberta durante todo o processamento.

• Real-time inference: indicada para respostas imediatas, com entradas menores e processamento rápido.
• Serverless inference: adequada para cargas variáveis e solicitações menores; não é ideal para processamento longo e arquivos grandes.
• Batch transform: processa grandes volumes em lote, mas não atende à necessidade de respostas próximas do tempo real.

• A. Modify CommunitiesSelfRegController

• C. Configure Communities registration to use a custom Visualforce page

• B. Modify the self-registration trigger — There is no standard “self-registration trigger” intended for this configuration. The registration logic is handled by the Visualforce controller.
• D. Configure a custom Apex controller — The standard approach is to modify the provided CommunitiesSelfRegController, rather than simply selecting a separate controller configuration.

• A: My Domain is required for many SSO configurations, but if SSO works, it is unlikely to be the cause of losing the target record.
• B: HTTP-POST is a valid SAML binding and does not inherently prevent redirection.
• D: An incorrect Federation ID generally causes authentication or user-matching failure—not successful login to the home page.