NCCT TS-C Exam Prep
Tech in Surgery - Certified (Page 3 )

• Suspended an operator who refused to use unsafe equipment.
• Paid another operator a bonus for using it.
• Prioritised short-term productivity over employee safety.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — The factory’s safety record is likely to be poor.

• Economy: Obtaining inputs at the lowest appropriate cost.
• Efficiency: Making the best use of resources, such as staff, money, and equipment.
• Effectiveness: Achieving the intended objectives or outcomes.

1. The specific table — for example, incident
2. The parent table — for example, task
3. The wildcard table — *, which applies broadly

• Third-party enterprise application with embedded AI: The provider manages most security controls. The customer mainly manages users, data, and configuration.
• Application using an existing third-party FM: The customer controls the application and its inputs/outputs, but the provider controls the underlying model and infrastructure.
• Fine-tuning a third-party FM: The customer has additional responsibility for training data, data protection, and model behavior, but still depends on the provider’s base model and platform.
• Building and training a model from scratch: The customer controls the model, training data, application, deployment, and many security safeguards. This creates the greatest security ownership.

• Amazon SageMaker — charges apply for compute, storage, and other resources used.
• AWS Config — generally charges for configuration recording and rule evaluations.
• Amazon CloudWatch — has a limited free tier, but many metrics, logs, alarms, and API usage can incur charges.

• B — The most significant risks are held by SQ.

• C — SQ should recognise the cars as inventory.

• F — SQ recognises revenue when LM sells a car to a third party.

• A: LM does not hold the most significant risks.
• D: LM does not recognise the cars as inventory.
• E: SQ should not recognise revenue when cars are merely delivered to LM.

• Create the field in the CRM on the relevant person records—typically Lead and Contact in Salesforce.
• Give the Marketo Sync User read/write access to the field.

• Matching hashes: The software is likely unchanged.
• Different hashes: The software or its contents have been modified.

• Encryption: Protects confidentiality, not primarily integrity.
• Baselines: Document expected configurations and support comparison, but hashing is more directly suited to verifying file integrity.
• Tokenization: Replaces sensitive data with tokens and is unrelated to software tampering.

• Undefined or blank values
• Relationship matching problems
• Duplicate or conflicting keys
• Errors when querying the model

• Normalize all values to upper- or lowercase in the source query or Power Query.
• Add an index or surrogate key when values that differ only by case must remain distinct.

• SOSL searches text across objects and is not appropriate for selecting Account table columns.
• describeSObjects() provides metadata about objects and fields, but it does not itself build or execute the query.
• Dynamic Schema binding supports runtime determination of object and field information, which is required here.
• REST API is unnecessary because this is being implemented in Apex.

• C — Some risks cannot be eliminated.

• D — Accepting residual risk does not imply recklessness.

• E — Most companies in this industry will say something similar.

• Security
• Availability
• Processing integrity
• Confidentiality
• Privacy

• Whether controls are suitably designed, and
• Whether they operated effectively over a period of time

• The Azure DevOps (Boards only) connector is designed specifically for Azure DevOps Analytics views.
• It authenticates directly to Azure DevOps and lets you select an existing Analytics view.
• Filters defined in the Analytics view are applied by Azure DevOps before Power BI retrieves the data, reducing the amount of data transferred.

• Azure DevOps Server (Boards only) is for on-premises Azure DevOps Server.
• OData Feed can consume OData endpoints, but it is not the dedicated Azure DevOps Analytics-view connector.
• OData queries are not the intended dedicated connector for this requirement.

• JobTitle: User1 and User3 only
• UsageLocation: User1, User2, and User3

• For a user whose source of authority is Windows Server Active Directory, attributes such as JobTitle are synchronized to Microsoft Entra ID. You must change them in on-premises AD; editing them in Entra ID is not allowed or will be overwritten.
• UsageLocation is a cloud-managed attribute used mainly for licensing and service availability. It can be set or changed in Microsoft Entra ID, including for synchronized users.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Sustainability
• Performance efficiency
• Reliability

• LastName: Required.
• FirstName: Optional.
• AccountId: Optional; a Contact may be associated with an Account later or remain private, depending on organization settings.
• Name: A compound display field made from first and last name; it isn’t entered as a separate field.

• A business-hours greeting
• An after-hours greeting
• A holiday greeting

• Weekday evenings/nights
• Saturdays and Sundays

1. Auto attendant 1

1. Auto attendant 2

• Formatting: May remove file-system references but often leaves recoverable data.
• Degaussing: Uses a magnetic field to erase data, but can damage or make magnetic drives unusable.
• Defragmentation: Rearranges data for performance; it does not securely erase information.

1. Create Workspace2 with Lakehouse2 — F
2. Migrate the Employee table to Lakehouse2 — E
3. Assign the data engineer the Contributor role for Workspace1 — D

Why

• Sharing Lakehouse1 would not provide the required isolation.
• Viewer access would not allow writing to Customer.
• Giving Contributor access to Workspace2 would expose the sensitive table.

• Label applied does not automatically exclude a file from Copilot.
• Encryption/usage rights determine whether Copilot can access the file’s content.
• If the user has no permission under Label2, File3 should be unavailable to Copilot for that user.
• File3’s label might be inherited by derived content only if File3 was actually processed and contributed by an authorized user; it should not be treated as contributing merely because it exists in the source set.

1. Which host originated the infection
2. Whether each other host is clean or infected
3. Which firewall or host logs provide evidence of the infection’s movement

• Find the earliest infection-related event. The host associated with that event is the likely origin.
• Follow the timeline: outbound connections from that host may indicate propagation or command-and-control activity.
• A host receiving suspicious traffic is not automatically infected; look for evidence that it executed or initiated malicious activity.
• A firewall log can show traffic paths, but endpoint logs are usually needed to confirm infection.
• Mark a host clean only when the logs show no indicators of compromise or malicious activity.

• Active-active routers: Provide redundant Internet connections/devices. Both can operate, so traffic can fail over or be load-balanced.
• Active-active firewalls: Avoid a single firewall becoming a failure point while maintaining security inspection.
• Load balancers: Distribute requests across multiple web servers. If one server fails, traffic can go to the other.
• Redundant power supplies: A server with separate power supplies should connect to independent power sources or circuits.
• UPS A and UPS B: Provide backup power and redundancy. Ideally, each power supply is connected to a different UPS.
• SONET ring: A ring topology provides alternate paths if a fiber link or segment fails.

• File hashes
• Strings and metadata
• Binary or code structure
• Known malicious patterns
• Embedded indicators or signatures

• Sandbox: Executes the file in an isolated environment; useful for observing behavior, but usually slower.
• Network traffic analysis: Examines communications generated by a system or application, not the file itself.
• Package monitoring: Tracks software packages or installations and is not the primary method for examining malware signatures.

• Feedback form: Captures opinions, not necessarily actual behavior; users may not respond.
• Questionnaire: Relies on memory and subjective judgments about usefulness.
• Interviews: Can provide valuable qualitative insights, but a sample of users may not represent overall usage accurately.

1. Open the Microsoft Entra Connect wizard.
2. Select Configure.
3. Choose Customize synchronization options.
4. Authenticate when prompted.
5. On the Domain and OU filtering page, select:

1. Complete the wizard.

• Start-ADSyncSyncCycle only starts synchronization; it does not change which OUs are included.
• Manage federation configures federation settings, which are unrelated to OU filtering.
• Add-ADSyncConnectorAttributeInclusion concerns connector attributes, not selecting additional OUs for synchronization.

• Response and resolution time frames
• Availability or uptime requirements
• Performance targets
• Support obligations
• Penalties for failing to meet requirements

• SOW (Statement of Work): Defines the project’s scope, tasks, and deliverables.
• MOA (Memorandum of Agreement): Describes cooperation and responsibilities between parties.
• MOU (Memorandum of Understanding): Records a general mutual understanding, usually without detailed enforceable service targets.

• Note the question number before leaving—for example, Question 38.
• Use the exam’s question navigator or Back/Previous button to return to that number.
• If you close or refresh the page, your position may not be saved, depending on the site. Reopen the page and select the question number again.
• Avoid using the browser’s Back button if it causes the exam page to reload; use the exam’s built-in navigation instead.

• A. Adjust resolution: Incorrect because an incompatible resolution usually causes no display, distortion, or an unsupported-mode message—not intermittent flickering.
• B. Swap the HDMI cable: Correct. Replacing the common, easily tested component is the appropriate troubleshooting step.
• C. Replace the projector: Incorrect because the issue also occurs with a monitor.
• D. Configure refresh rate: A mismatched refresh rate can cause visual problems, but the repeated flicker across displays points more strongly to the cable.

• C: Develop the rule in the Rules Editor, define the events, match, and condition sections, then use the test rule feature. This directly validates the YARA-L rule without enabling it in production.
• A: UDM Search can help investigate data and refine filters, but it does not fully test YARA-L logic—especially complex event joins, match windows, and conditions.

• Transport and handling
• Storage and warehousing
• Refrigeration
• Shelf-stacking or replenishment
• Other costs directly attributable to product P

• Each team’s Bedrock workflow uses a separate IAM service role.
• The role’s Amazon S3 permissions can be limited to only that team’s customer folder or objects.
• This enforces least privilege and prevents one team’s Bedrock application from accessing another team’s data.
• Access is enforced by AWS permissions, not by asking users to provide a customer name in each request.

• A single role with broad S3 access does not provide team-level isolation.
• Asking teams to specify a customer name is not an access-control mechanism.
• Redacting data does not prevent unauthorized access.
• A bucket policy alone is insufficient unless it explicitly enforces the required team-role restrictions.

• Relationship cardinality:

• Filter direction:

• Active versus inactive relationships: only active relationships automatically propagate filters.
• Blank or unmatched values: a fact-table value without a matching dimension row can create the model’s blank/unknown member.
• Uniqueness: the “one” side must contain unique values; duplicate keys generally belong on the “many” side.

• Recovery Services vault — stores Site Recovery configuration and recovery metadata.
• Hyper-V site — represents the on-premises Hyper-V environment.
• Azure virtual network — the target network where the replicated VM will run after failover. Since Azure VMs already use the same virtual network, that VNet can be selected as the target.
• Storage account or managed-disk target, depending on the ASR configuration and portal version.
• Provider/agent on the Hyper-V server — enables replication from Hyper-V to Azure.

• The users currently have Office 365 Enterprise E3 licenses assigned directly.
• Assigning Microsoft 365 Enterprise E5 through a group does not automatically remove their directly assigned E3 licenses.
• From the Licenses blade, you can select the E3 product and remove it from all assigned users in one operation. This requires less effort than editing 2,500 users individually.

• Identity Governance manages access reviews, entitlement management, and related governance—not bulk license removal.
• Set-AzureAdUser does not remove product licenses.
• Set-WindowsProductKey applies Windows product keys and is unrelated to Microsoft 365 licensing.

DAX 
Blue Sales = 
CALCULATE( 
    [Total Sales], 
    KEEPFILTERS('Product'[Color] = "Blue") 
)

• CALCULATE evaluates [Total Sales] after applying an additional filter.
• 'Product'[Color] = "Blue" restricts the calculation to blue products.
• KEEPFILTERS ensures the existing filter context is preserved. For example, filters for year, region, or customer remain active. If Color is already filtered, the blue condition is applied as an intersection rather than replacing the existing filter.
• Avoid ALL, because it removes filters and would not maintain the existing context.

• Determine the project budget — Budget development is a separate cost-management activity.
• Develop a communication plan — This belongs to project communications planning, not schedule completion.
• Establish baselines — Baselines are created after the schedule and related plans have been developed and approved. They formally capture the approved plan.

1. insert con; ? 1
2. Database.setSavepoint(); ? 2
3. update con; ? 3
4. Database.rollback(sp_admin); ? 4

• Suporta domínios personalizados.
• Oferece 50 GB de armazenamento — suficiente para os 10 GB de cada aplicação.
• Usa instâncias de computação dedicadas.
• Inclui balanceamento de carga entre instâncias.
• É o plano mais econômico entre as opções que atendem a todos esses requisitos.

• Honeypots: Deliberately vulnerable or attractive systems designed to lure attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of compromise.
• DNS sinkholes: Redirect requests for known malicious domains to a controlled internal system instead of allowing the connection. This can identify infected hosts attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it protects data but does not primarily detect attackers.
• CI/CD: Automates software development and deployment processes.
• Threat modeling: Identifies potential threats and weaknesses before or during system design.
• Data obfuscation: Makes data harder to understand, but it is not an attacker-detection method.

• Identifies which user or department owns the device
• Supports inventory and compliance requirements
• Enables tracking of lost, stolen, retired, or unauthorized devices
• Helps enforce security controls such as mobile-device management and secure configuration

• SQL injection
• Cross-site scripting (XSS)
• Malicious or malformed web requests
• Some application-layer attacks

• Layer 4 firewall: Filters based mainly on IP addresses, ports, and transport protocols; it cannot deeply inspect web application content.
• NGFW: Provides advanced network filtering and may include application awareness, but a WAF is more specifically designed to protect web applications.
• UTM: Combines several security functions in one appliance, but it is not the most targeted solution for a web portal.

• Technical platform interfaces: Important for integration and interoperability, but they should support—not drive—the architecture.
• Scalability of the network: Valuable as the organization grows, but a scalable solution is ineffective if it does not meet business or security needs.
• Development methodologies: Relevant to implementation, but they do not define the organization’s fundamental security requirements.

• C — Before update
• D — Before insert

apex 
trigger AccountTrigger on Account (before insert, before update) { 
    for (Account acct : Trigger.new) { 
        acct.Description = 'Updated automatically'; 
    } 
}

• In after insert and after update, Trigger.new records are read-only.
• Use after triggers when you need the record’s final database Id or want to create/update related records.
• Attempting to change a field directly in an after trigger causes a read-only error.

• Configure row-level security (RLS) using the sales region and the HR manager’s identity.
• Publish the reports and datasets through a Power BI app.
• Grant the HR managers permission to use the app, but do not add them as workspace members.
• App users can view and interact with reports while RLS limits them to their region.
• They cannot modify the report layout because they do not have workspace editing permissions.

• Adding them to the workspace gives them workspace permissions that may allow report or dataset changes, depending on the assigned role.
• Creating copies is unnecessary and creates maintenance and security problems.
• Hosting datasets and reports in different workspaces does not, by itself, provide the required controlled access.

• Accept terms of use
• Enter a temporary code or credentials
• Provide basic registration information

• Enterprise authentication — Authenticates organizational users, often with centralized identity services; it is not specifically designed for temporary guest access.
• Ad hoc network — A temporary device-to-device network, not an authentication process.
• WPA3 — A wireless security standard. It protects Wi-Fi access but does not provide the web-based temporary access workflow described here.

• 25 – Traditional SMTP server-to-server mail transfer; often blocked for client submission and not inherently secure.
• 110 – POP3 for receiving email; unencrypted by default.
• 143 – IMAP for accessing email; unencrypted by default.
• 587 – Authenticated email submission and commonly secured with TLS.

• nmap - 10.11.1.130 — a network scanning command; mitigated with controls such as firewalls, monitoring, or access restrictions.
• “Click this link to get your free gift card.” — a phishing or social-engineering message; addressed through user awareness, email filtering, and authentication controls.
• “Your connection is not private.” — indicates a certificate or TLS validation problem; addressed by correcting the certificate or secure-connection configuration.

• Complete MFA, or
• Securely change their password

• Identity Protection: evaluates user and sign-in risk and can trigger remediation.
• Privileged Identity Management (PIM): manages temporary, just-in-time access to privileged roles; it does not automatically require password changes for risky sign-ins.

• Restrict a port to a defined number of MAC addresses
• Use statically assigned or “sticky” MAC addresses
• Shut down or restrict the port when violations occur

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect suspicious network activity, but is not the primary control for limiting switch MAC entries.
• NGFW: Filters traffic at the network boundary; it does not directly prevent MAC table flooding on access switches.

• contoso.onmicrosoft.com
• contoso1.onmicrosoft.com

• onmicrosoft.com domains: Maximum of five per tenant.
• Custom domains: Domains that your organization owns and verifies in Microsoft 365.