Choose all that apply. If a Sniffer is connected to a switch port that is not configured as the span or mirror port, the analyzer will see __________.

Frames sent to the server
Frames sent from the server
Frames sent to the Sniffer
Nothing. This configuration will not work

Answer(s): B

Show Answer Next Question

Question: 22

If you __________ with the Sniffer you may get lost frames or incomplete conversations as a result.

Mirror an entire VLAN
Mirror ports from different VLANs
Mirror one or more ports on a very active switch
All of the above

Answer(s): B

Show Answer Next Question

Question: 23

High end switches may implement standards but still not be compatible with other vendors.

True
False
Answer is Pending

Answer(s): C

Show Answer Next Question

Question: 24

The name entered in the Switch Configuration Name field will set the name:

On the switchs IOS
On the monitor port
For the Switch Configuration list
On the network

Answer(s): B

Show Answer Next Question

Question: 25

Choose all that apply. A feature of a switch is:

It can learn MAC addresses from the frames arriving on each port
It can forward frames based on MAC destination addresses
It can filter frames based on IP addresses
It can provide full bandwidth on each port

Answer(s): A,C

Show Answer Next Question

Viewing page 16 of 30
Viewing questions 76 - 80 out of 142 questions

Post your Comments and Discuss Network General 1T6-220 exam dumps with other Community members:

Comments:

Name:

1T6-220 Exam Discussions & Posts

teddynmorka Commented on April 16, 2026
Question 57:
Question 57 asks: Which two goals/reasons to implement private IPv4 addressing on your network?

Correct answers:

- Conserve IPv4 address — using RFC 1918 private address space means internal hosts don’t consume public IPv4 addresses, often paired with NAT for Internet access. - Reduce the risk of a network security breach — private addresses are not publicly routable, so external hosts cannot directly reach internal devices; NAT adds an extra layer of obscurity.

Why the others aren’t correct:

- Comply with PCI regulations – not a direct requirement of private addressing. - Reduce the size of the forwarding table on network routers – private addressing doesn’t inherently shrink internal router FIB size. - Comply with local law – private addressing isn’t a legal requirement.
Key concept: Private IPv4 addresses (RFC 1918) are used inside networks to conserve public addresses and reduce exposure to the Internet, typically with NAT for outbound traffic.
London, United Kingdom

Anonymous User Commented on April 16, 2026
Question 2:

Correct answer: D. Use Vertex AI Agent Builder to create a custom AI agent.

Why this is correct:

The goal is to answer questions about papers and provide summarized insights without heavy coding.

Vertex AI Agent Builder enables creating custom AI agents with low-code/no-code capabilities that can process scientific documents and generate QA responses and summaries.

Why the other options are less suitable:

A: Gemini for Google Workspace is for collaborative document review, not for building a document-answering agent.

B: Vertex AI Search indexes papers for keyword searches but doesn’t directly answer questions or provide summaries.

C: Vertex AI AutoML trains classification models, which is not the same as building a QA/summarization agent.

Québec, Canada

Anonymous User Commented on April 16, 2026
Question 1:

Correct answer: D. Use Google Cloud databases and Vertex AI for the agent to get live data.

Why this is correct:

The agent must access real-time internal inventory data to check levels and adjust delivery schedules.

Google Cloud databases provide the live data store for current inventory.

Vertex AI offers the platform to build, deploy, and manage the AI agent and connect it to live data sources.

Why the other options are less suitable:

A: Building a custom API for every interaction adds unnecessary complexity and cost; a direct live-data connection is more scalable.

B: Pre-built chatbots usually don’t integrate with private, real-time internal systems required for inventory and scheduling updates.

C: Fine-tuning a model with sample data does not give live data access, so it cannot respond to current inventory or scheduling needs.

Québec, Canada

Anonymous User Commented on April 16, 2026
Employees located off-site must have access to company resources in order to complete their assigned tasks. These employees utilize a solution that allows remote access without interception concerns. Which of the following best describes this solution?

Answer: VPN

Explanation: A VPN provides secure, encrypted remote access to the corporate network, creating a tunnel that protects data from interception for off-site workers.

- Proxy server: does not inherently encrypt end-to-end. - NGFW: focuses on firewalling and inspection, not remote access. - Security zone: relates to segmentation, not remote access.
Johannesburg, South Africa

Anonymous User Commented on April 16, 2026
Question 50:

Correct answer: A. Purchase Provisioned Throughput for the custom model.

Why: When using a private/custom model in Amazon Bedrock, you must allocate capacity by purchasing provisioned throughput to guarantee predictable latency and scale for real-time inference. Bedrock serves the model through its own hosting, so deploying to a SageMaker endpoint or registering it in SageMaker Model Registry isn’t required for Bedrock usage. Access control is managed via Bedrock/IAM, but the provisioning step is the mandatory one to enable serving.

Bengaluru, India

Anonymous User Commented on April 16, 2026
Question 4:
Correct answer: B, C

Service Cloud focuses on customer service and support.

Knowledge: Used for a knowledge base of articles to assist agents and customers.

Entitlements: Define service levels/SLA for handling cases.

Campaigns and Opportunities/Quotes are typically part of Sales Cloud (marketing and sales functionalities, respectively).

Pune, India

Anonymous User Commented on April 16, 2026
Question 1:

Correct answer: D — Promote off-label use to a carefully selected patient population.

Why:

Conditional approval means confirmatory studies are still required. To minimize risk during this period, you should implement risk minimization actions that keep use within approved terms.

Labeling for appropriate populations ensures clinicians and patients know exactly who the product is intended for.

Educating patients and healthcare providers reduces misuse and misinterpretation of how to use the product.

Delaying product launch limits patient exposure to potential unknown risks until safety/efficacy are confirmed.

Promoting off-label use is least effective (and inappropriate): it increases risk, bypasses approved indications, and undermines regulatory commitments. Off-label use lacks the evidentiary basis and regulatory safeguards of approved indications.

Jinrongjie, China

openiyi2613 Commented on April 16, 2026
Question 1:

Correct answer: runC

Why: The Open Container Initiative (OCI) defines a runtime specification for spawning and managing containers. The native, reference implementation of this spec is runC (the OCI runtime). It runs containers directly on the host kernel using Linux namespaces, cgroups, etc.—this is what makes it the OCI-compliant native runtime.

Why the others are not considered the native OCI runtime:

- runV: an older VM-based runtime, not the standard OCI runtime. - kata-containers: VM-based isolation layered on top of OCI, not the native host-process runtime. - gvisor: a user-space kernel sandbox for containers, not an OCI runtime itself.
Lagos, Nigeria

Anonymous User Commented on April 16, 2026
tftp full form

TFTP full form: Trivial File Transfer Protocol.

Quick note: It’s a simplified file transfer protocol (uses UDP/port 69) often used in networking for loading IOS images or configurations to/from Cisco devices. This topic can appear in 200-301 when discussing device file transfers.

Mumbai, India

Community-Verified AI Explanation Commented on April 16, 2026
Question 51:

Correct answer: the Microsoft 365 connector (option C).

Why:

To investigate threats using data in the unified audit log of Microsoft Defender for Cloud Apps, you must first connect Microsoft 365 to Defender for Cloud Apps.

The Microsoft 365 App Connector enables Defender for Cloud Apps to ingest data (including audit logs) from Microsoft 365 so you can correlate and investigate threats.

What to do (high level):

In Microsoft 365 Defender portal: Settings > Cloud Apps > App Connectors.

Click +Connect an app and select Microsoft 365.

Choose the necessary components, click Connect, and follow links to complete the setup.

Verify the connector shows as Connected.

Why the others aren’t first steps:

Azure connector: for Azure resources, not Microsoft 365 audit data.

User enrichment settings: enrich alerts with user data, not data ingestion.

Automatic log upload settings: not the initial integration step for Cloud Apps data.

Nairobi, Kenya

Legofi Commented on April 15, 2026
It's helpful
Thabazimbi, South Africa

neecyb9 Commented on April 15, 2026
Question 20:
Correct answer: D. Routing table

Why: The routing table is volatile data stored in memory. Capturing it first preserves the current network paths and possible attacker movement before isolating the server. Powering off or seizing the host could cause this information to be lost.

Why not the others:

- A Hard disk and B Primary boot partition: non-volatile; should be collected after preserving volatile data. - C Malicious files: important, but not as time-sensitive as live routing info. - E Static IP address: configuration data; less critical than the live routing state for immediate incident reconstruction.

Key concept: In incident response, collect volatile data first (memory, routing table, active connections) to preserve evidence before performing actions that could alter or destroy it.

Half Way Tree, Jamaica

neecyb9 Commented on April 15, 2026
Question 19:
Correct answer: C. Reverse engineering
Why: A malicious binary lacks source code, so the best way to understand its behavior is to perform reverse engineering—disassembling, decompiling, and tracing its code paths to reveal payloads, persistence, and IOCs.
Why not the others:

Code analysis: requires source code; not applicable to a compiled binary.

Static analysis: analyzes code without execution, but for binaries this is limited and often less revealing than reverse engineering.

Fuzzing: tests how software handles malformed inputs; not designed to reveal the internal logic or capabilities of a malware binary.

Key concept: For binaries, reverse engineering is the primary method to uncover how malware works and what indicators to hunt for.
Half Way Tree, Jamaica

Anonymous User Commented on April 15, 2026
Following a recent power outage, a server in the datacenter has been constantly going offline and losing its configuration. Users have been experiencing access issues while using the application on the server. The server technician notices the date and time are incorrect when the server is online. All other servers are working.

Correct answers: A and B.

Why:

- A. The server has a faulty power supply — Inconsistent power can cause abrupt shutdowns/restarts and loss of configuration data. - B. The server has a CMOS battery failure — The CMOS/RTC stores BIOS settings and the real-time clock. If the battery is failing, power loss can reset BIOS settings and the system clock, causing configuration loss and incorrect date/time after outages.

Other options (OS updates, LED panel, NTP) are less likely to explain both ongoing outages and time/date reset after a power event. Once you replace the CMOS battery and ensure stable power (with a capable PSU/UPS), reconfigure BIOS and enable proper time synchronization.

Johannesburg, South Africa

Anonymous User Commented on April 15, 2026
Question 13:
Question 13: Which of the following objects can be cloned? (Choose four.)
Correct answers: Tables, Named File Formats, Schemas, Databases (i.e., A, B, C, E)
Reason:

Snowflake supports zero-copy cloning for these object types. A clone is created quickly by copying metadata and pointers to the underlying data, not by duplicating the data itself.

Objects that cannot be cloned (per the options) are Shares and Users.

Examples:

Clone a table: CREATE TABLE new_table CLONE old_table;

Clone a database: CREATE DATABASE new_db CLONE old_db;

Clone a schema: CREATE SCHEMA new_schema CLONE old_schema;

Clone a named file format: CREATE FILE FORMAT new_format CLONE old_format;

Mumbai, India

sabah-ahmed2024 Commented on April 15, 2026
When a family with labeled dimensions as instance parameters is placed in a project, what controls display to help you work with it
Shape handles

Explanation: When a family with labeled dimensions as instance parameters is placed, the element shows shape handles (grips) that you can drag to adjust the geometry and parameters directly. Other options (Shared Parameters, Place families, Templates) do not control this in-view editing.

Jeddah, Saudi Arabia

sabah-ahmed2024 Commented on April 15, 2026
Question 1:

Correct answer: True.

Why: In the Rendering dialog box, you can choose a quality preset that’s faster. A faster (lower quality) preset reduces the number of samples, lighting calculations, and other processing, so rendering takes less time. The trade-off is lower image quality (noise, less detail). Use a fast preset for quick previews; use higher quality for final renders.

Jeddah, Saudi Arabia

amirahs Commented on April 15, 2026
Question 157:

Correct answer: OAuth (D)

Why: OAuth is designed for authorization, not authentication. It uses access tokens to grant applications permission to access resources on behalf of a user, focusing on what the application can do with the user’s data. This aligns with a goal of SSO when the emphasis is on application authorization rather than verifying the user’s identity.

Why not the others:

- LDAP Federation: Primarily about directory identity integration, not token-based app authorization. - SAML: Centers on authentication and SSO via identity assertions, not primarily about granting apps permission via tokens.

Quick note: If you needed both authentication and SSO, you’d typically look at OpenID Connect (OIDC) on top of OAuth, rather than OAuth alone.

Cape Town, South Africa

Anonymous User Commented on April 15, 2026
Question 53:

Answer: False

Explanation:

- Snowflake does not charge data providers an extra fee for creating a data share. - Costs are based on standard storage and compute usage for each party: - Data providers pay for their own storage/compute as usual. - Data consumers pay for their own compute when querying the shared data. - The per-share fee does not exist; sharing is billed like normal Snowflake usage (no additional per-share charge).
Marseille, France

Anonymous User Commented on April 15, 2026
why is not answer D ?
Reason: D (Build the Data Pipeline) does apply in Snowflake migrations.

Snowflake doesn’t use traditional indexes. There are no index objects to migrate, which is why “Migrate Indexes” does not apply.

You still migrate users and schemas, and you almost always build/load pipelines to bring data into Snowflake (ETL/ELT processes), so D is a valid, applicable activity.

So the item that does not apply is C Migrate Indexes, not D.
Marseille, France

Anonymous User Commented on April 15, 2026
Question 41:
Correct answer: C. Scaling out
Explanation:

A multi-cluster warehouse can run multiple compute clusters in parallel to handle concurrent queries.

Increasing the maximum number of clusters allows Snowflake to start more clusters as needed, distributing work across them. This is known as scaling out (horizontal scaling).

Scaling out improves concurrency and reduces wait times when many users run queries at once.

Scaling up, by contrast, would increase the size (resources) of each individual cluster, not the number of clusters.

Notes:

Terms like “scaling rhythmically” or “scaling max” aren’t standard; the core idea here is adding more clusters (scaling out) versus making a single cluster bigger (scaling up).

Marseille, France

Anonymous User Commented on April 15, 2026
Question 4:

Correct answer: B. SECURITYADMIN

Why: The SECURITYADMIN role is designed for security-related tasks, including creating and managing users, roles, and grants. It’s the appropriate role to handle user lifecycle and access control.

What the other roles do (for context):

- SYSADMIN: primarily for managing database objects, warehouses, and compute resources. - ACCOUNTADMIN: has the broadest privileges (full account control) and should be used sparingly. - PUBLIC: a baseline, non-privileged role.

Practical note: To assign or grant privileges to users and roles, you typically operate under SECURITYADMIN (or ACCOUNTADMIN if necessary), keeping security concerns separated from day-to-day object management.

Mumbai, India

Anonymous User Commented on April 15, 2026
Question 19:
Question 19 asks which expressions are True after code.py is executed as a script (i.e., run directly).
Answer: B and D
Why:

B. __name__ == '__main__'

When a Python file is run as the main program, the special variable __name__ is set to '__main__'. So this expression is True in that scenario.

D. len(ClassB.__bases__) == 1

ClassB.__bases__ is a tuple of its base classes. If ClassB inherits from exactly one class, the length is 1, so this expression is True.
Why the others are not True (usually):

A. str(Object) == 'Object'

Converting a class to string typically yields something like "<class 'Object'>" (a full representation), not just 'Object'.

C. ClassA.__module__ == 'ClassA'

__module__ is the name of the module in which ClassA is defined (e.g., '__main__' or another module name). It is unlikely to be 'ClassA' unless a module is actually named ClassA, which is uncommon here.
Note: The image in the question isn’t visible here, but the provided answer (B and D) aligns with the common behavior described.
El Battan, Tunisia

Anonymous User Commented on April 15, 2026
Question 17:
For Question 17, the correct choices are A, B, E.

A. The bank wants to retire customization

A new FSC org helps shed legacy customizations that don’t align with the FSC data model and features, making the implementation cleaner.

B. The current implementation is product-centric and the bank wants to move to a customer-centric view

FSC supports a customer-centric model (e.g., Person Accounts, 360 view). Starting fresh makes it easier to adopt this model without retrofit work.

E. Existing business capabilities and processes can be redesigned to deliver a higher business impact

A blank slate enables implementing redesigned processes and capabilities that maximize impact, rather than adapting old ones.
Why not C and D?

C suggests data migration is a big concern, which points to preserving the current org or minimizing migration, not starting fresh.

D implies limited redesign opportunities, which also reduces the case for a new org.

In short, A, B, and E indicate the benefits of a new org to leverage FSC’s standard model and redesigned processes.
Mont-Saint-Aignan, France

Community-Verified AI Explanation Commented on April 14, 2026
Question 225:

Question 225: You need to assign roles so User1 can enable UEBA for entity behavior in Microsoft Entra with least privilege.

Correct selections:

- Box 1: Security Administrator (Microsoft Entra Role) - Box 2: Microsoft Sentinel Contributor (Azure Role)

Why:

- Entra UEBA enablement requires Global or Security Administrator at the Entra level; use Security Administrator to follow the least-privilege principle. - For Azure RBAC, you need at least one of: Microsoft Sentinel Contributor (workspace/resource group) or Log Analytics Contributor. The minimal, appropriate choice for enabling UEBA is Microsoft Sentinel Contributor at the workspace level.
Nairobi, Kenya

Anonymous User Commented on April 14, 2026
Question 63:
I can’t view the image in Q63, but the provided explanation shows the correct choices are:

Box 1: No

Box 2: Yes

Box 3: Yes

Why:

Box 1 (No): In a PaaS model you don’t get access to the underlying operating system or servers. Services like Azure Web Apps host your app on shared VMs, but you don’t manage the OS or IIS directly.

Box 2 (Yes): A PaaS solution hosting web apps can scale automatically. This autoscaling means the platform can add/remove instances as load changes.

Box 3 (Yes): The autoscaling capability is part of the PaaS platform. The web app runs on behind-the-scenes VMs (e.g., IIS), but you don’t manage them; scaling is automated via the PaaS service.

Subang Jaya, Malaysia

Community-Verified AI Explanation Commented on April 14, 2026
Why not AzureActivity and then AuditLogs

Short answer: Start with AuditLogs, not AzureActivity.

Why:

- AuditLogs contains the actual user creation events: OperationName = "Add user" and who initiated the creation (the actor). This gives you the anchor for “who created new accounts.” - AzureActivity shows follow-on admin actions (e.g., "Create role assignment") by a Caller, which you want to correlate to the same actor within 24 hours. - Beginning with AuditLogs lets you filter to only new-user events and then check if that same actor performed privileged actions in the next 24 hours, which is the behavior you’re testing for.

If you started with AzureActivity:

- You’d need to map the initiator back to the creator of the specific new accounts, which is less direct and may require extra joins or assumptions. - You’d scan more data (larger set) before narrowing to the relevant creator events.

In short: AuditLogs provides the precise creation events and actor, making the correlation with AzureActivity clearer and more efficient.

Nairobi, Kenya

Shalini Commented on April 14, 2026
Good sat of questions
Bhubaneswar, India

Community-Verified AI Explanation Commented on April 14, 2026
Question 1:

Answer: Create a YAML file based on the DNS template.

Explanation: For deploying 200 ASIM parsers with minimal admin effort, start with a YAML template based on the DNS schema. Convert that YAML to an ARM template (using the YAML-to-ARM converter) and deploy. This scales better than manual copying. (Manual copy to the Azure Monitor Logs page can be used for testing, but the YAML-based approach is the recommended first step for large-scale deployment.)

Nairobi, Kenya

Anonymous User Commented on April 14, 2026
Question 1:
Here’s the targeted reasoning for Question 1.
Goal: Ensure production-environment admins are MFA-enabled and MFA is enforced at sign-in to the Azure portal.
What to configure (two parts):

Box 1: Microsoft Entra ID Protection

- Set up the MFA registration policy so that users who manage the production environment are enrolled in MFA. - Steps (high level): - In the Azure portal, go to Microsoft Entra ID > Security > Identity Protection > MFA registration policy. - Under Assignments, include the users (All users or specific groups) who manage production. - Enforce the policy On and save. - Why: This ensures users are registered for MFA before they are prompted to sign in.

Box 2: Capolicy1 (existing Conditional Access policy)

- Add a grant control to require MFA for sign-ins to the Azure portal when managing the production environment. - This CA policy already requires a hybrid joined device; you now also require MFA (Grant: Require MFA) for those sign-ins. - Why: This enforces MFA at the point of sign-in for the production-management scenario.
In short: enable MFA enrollment via Identity Protection policy (Box 1) and enforce MFA during sign-in by configuring Capolicy1 with a “Require MFA” grant (Box 2).
Sydney, Australia

studywithsalvi Commented on April 14, 2026
Question 37:
Answer: B — Perform credential dumping

Rationale: With an internal foothold, dumping credentials (hashes/passwords) enables lateral movement and access to more confidential data, accelerating exfiltration or ransomware goals. Social engineering is typically an initial access step, compromising another endpoint is redundant after foothold, and while share enumeration helps, credentials provide broader access and impact.

Nixa, United States

Anonymous User Commented on April 14, 2026
Question 1:

I can’t view the exhibit image, but based on the text, the destination is a single host: 10.10.13.10/32.

The correct route type is host route.

- A host route is a specific route to one IP address, shown with a /32 mask. - Routing selects routes by longest prefix match; a /32 is more specific than any network route (e.g., /24) or the default route (0.0.0.0/0). - Therefore, R1 will use the host route to reach 10.10.13.10.

Why not the others:

- Default route: used only if no more specific route exists. - Network route: for a whole network
Markham, Canada

Anonymous User Commented on April 14, 2026
Question 7:

Answer: FALSE

Why: Enterprise technology architecture describes the structure of technology assets (infrastructure, platforms, applications, integration) and how they support business capabilities. Its dependencies are on business strategy, processes, standards, security, and governance—not on “acting on specified data according to business requirements.” That focus belongs to enterprise data architecture, which covers data models, data quality, data flows, and data governance.

Jeddah, Saudi Arabia

Anonymous User Commented on April 14, 2026
Question 5:
Question 5: Which of the following threat vectors is most commonly utilized by insider threat actors attempting data exfiltration? Unidentified removable devices Default network device credentials Spear phishing emails Impersonation of business units through typosquatting
Answer: A — Unidentified removable devices
Explanation:

Insider threats often exfiltrate data using uncontrolled/removable media, which allows covert copying of sensitive data offsite without triggering external defenses.

Why the others are less likely:

Default network device credentials: mainly a privilege/access misuse issue, not specifically data exfiltration.

Spear phishing emails: external social engineering to gain access, not typically an insider’s data-leak method.

Impersonation via typosquatting: external impersonation tactic, not an insider exfiltration vector.

Mitigation ideas:

Enforce USB/device control and disable unmanaged removable media.

Implement DLP and encryption for sensitive data.

Monitor data transfers and apply least-privilege access.

New York, United States

Anonymous User Commented on April 14, 2026
Question 2:

Correct answer: D) Solution approach

Why: In enterprise analysis, one of the standard outputs is the Solution approach—the recommended way to address the business need (high-level plan, architecture, and procurement/implementation strategy). The other options are typically inputs or later-phase artifacts rather than outputs of enterprise analysis:

- Assumptions and constraints are inputs considered during analysis. - Stakeholder concerns are captured from stakeholders and used in analysis. - Solution performance assessment is primarily part of Solution Evaluation, not the enterprise-analysis outputs.
Hanoi, Vietnam

Anonymous User Commented on April 14, 2026
Question 2:

Correct answer: A

Why: When replacing drives to reduce performance degradation, you want the replacement with better or matching performance to avoid bottlenecks. In practice, pick the drive with higher IOPS and lower latency than the others, and ensure it’s compatible with the server (capacity, interface, RAID). This minimizes the hit to overall app performance.

Why not the others: The other options likely offer slower performance or higher latency, which would worsen degradation. Without seeing the exact charts, they would correspond to drives that are less capable than the chosen option (A).

Quick takeaway: Compare drive performance metrics (IOPS, latency, throughput) in the charts and select the drive that provides at least equal or better performance to keep the application
Mexico

Anonymous User Commented on April 14, 2026
Question 7:

Correct answer: D. The charging port is dirty or damaged

Why: The issue is tied to the device’s charging port rather than the cable. If flipping the cable occasionally fixes it, contact within the port (debris, bent pins, or damage) is likely causing intermittent connectivity. Since other devices charge fine with the same cable, the problem isn’t the cable itself.

Why not the others:

- The device needs to be restarted: unlikely to fix a physical port issue. - The battery may be swelling and needs inspection: would show other symptoms (sudden battery issues, safety concerns). - The cable is failing: would affect multiple devices, not just one, and flipping wouldn’t consistently resolve it.

Quick takeaway: If one device has intermi
Singapore

Anonymous User Commented on April 14, 2026
Question 3:
I don’t have the text for Question 3 in front of me. Please paste the exact question (including any exhibits or screenshots) and I’ll give a targeted explanation with the correct answer and reasoning.
If you want a quick prep approach in the meantime:

Identify the required framework and components (e.g., CAF for migration, DMF for data, ALM Accelerator for lifecycle, Well-Architected for UX and security).

Map requirements to the tool/framework features (e.g., SSOT with Dataverse, telemetry and escalation flows, ROI calculations).

Look for keywords like “conversational UX,” “SSOT,” “telemetry,” “escalation,” and “ROI” to pick the most appropriate framework and steps.

European Union

Anonymous User Commented on April 14, 2026
Question 1:
Question 1 asks you to configure a home network so you can remotely access a Windows PC and let the game console use chat/services over the wireless network.
Key setup to understand:

Wireless AP LAN

- LAN IP: 192.168.10.1 - Encryption: WPA2 PSK - Purpose: provides wireless connectivity to the devices and secures the wireless link.

Router (port-forward rule)

- Forward TCP port 3389 to the Windows PC - Purpose: enables remote desktop access from the Internet to the PC (RDP uses TCP 3389).

Firewall (screened subnet side)

- LAN IP: 10.100.0.1 - Purpose: acts as the gateway/firewall for the screened subnet, filtering traffic entering that segment.

New York, United States

Anonymous User Commented on April 14, 2026
Question 2:

Answer: Dataverse

Why:

- Power Apps apps hosted in Teams commonly use Dataverse as their data store. Connecting via the Dataverse connector lets you pull the actual tables used by the app into Power BI. - The other options aren’t correct here: - Microsoft Teams: accesses Teams content (messages, meetings), not the app’s data tables. - SQL Server: only if the app’s data is stored in SQL Server (not specified). - Dataflows: used for data preparation ingest, not a direct live connection to the app’s data.

Austin, United States

Mohammed Commented on April 14, 2026
Question 526:
Question 526 tests how org-wide defaults (OWD) and account-based sharing interact with role-based access to Opportunities.

Key concept: With OWD set to private, you only see opportunities you own unless you have additional sharing (e.g., access rights on accounts or sharing rules) that grant view/edit on opportunities related to accounts you manage.

Evaluate options:

- A. Kathy can edit and view her own opportunities. True (owner access allows edit/view). - B. Kathy can EDIT and VIEW her Jennifer’s opportunities. False (not stated; Jennifer’s opportunities aren’t described as accessible for edit). - C. Kathy can edit and view Phil’s opportunities. True if Phil’s opportunities are on accounts Kathy manages; she has edit/view on those. - D. Kathy can view but cannot EDIT Phil’s opportunities.
United Arab Emirates

Community-Verified AI Explanation Commented on April 14, 2026
You have an Azure subscription that contains a Microsoft Sentinel workspace. The workspace contains a Microsoft Defender for Cloud data connector. You need to customize which details will be included when an alert is created for a specific event. What should you do? Enable User and Entity Behavior Analytics (UEBA). Create a Data Collection Rule (DCR). Modify the properties of the connector. Create a scheduled query rule.

Correct answer: Create a Data Collection Rule (DCR).

Why:

- A DCR configures what data is ingested from connectors and how it’s parsed, directly shaping the details included in alerts. - UEBA is for anomaly detection, not alert payload customization. - Modifying the connector’s properties isn’t the standard method to tailor alert content for a specific event. - A scheduled query rule creates alerts from a query, not per-event alert detail customization.
Nairobi, Kenya

Anonymous User Commented on April 14, 2026
Question 11:
Question 11 asks for a design to store each employee’s contact details and high-resolution photos using native AWS services, enabling search and retrieval via AWS APIs.

Correct answer: B — Store each employee's contact information in a DynamoDB table along with the object keys for the photos stored in S3.

- Why: This pattern keeps metadata in a fast, scalable NoSQL store (DynamoDB) and uses S3 for large binary data (photos). The DynamoDB item can include the S3 object key, so your app can fetch the details from DynamoDB and then retrieve the photo from S3 (or generate a presigned URL). It provides low operational overhead and strong scalability.

Why the other options are less suitable:

- A: Encoding photos in Base64 and storing them in DynamoDB is inefficient (drives up item size and cost) and isn’t the recommended pattern for large binary data. - C: Using Cognito as a SaaS employee directory isn’t appropriate for storing and serving employee data and photos. - D: Storing metadata in RDS with photos in EFS adds operational overhead and is less scalable for a scalable, serverless directory.
Key concept: separate metadata in DynamoDB and binary data in S3; keep a pointer (S3 key) in DynamoDB for retrieval.
Bengaluru, India

Peter Commented on April 14, 2026
Hope able to view qns
Singapore, Singapore

Anonymous User Commented on April 14, 2026
Question 1:

Correct answer: Transfer (B)

Why:

A risk transfer strategy moves the financial impact of a risk to a third party. By purchasing cyber insurance, the company shifts potential losses (e.g., breach costs) to the insurer.

This is not reducing likelihood or impact directly (that would be Mitigate), nor eliminating the risk (Avoid), nor simply acknowledging it (Accept).

The risk register is the document listing risks, owners, thresholds, and mitigation actions; insurance addresses the financial consequence of those risks rather than the controls themselves.

Doha, Qatar

Anonymous User Commented on April 14, 2026
Question 1:

The correct answer: Clinical investigations (Option C).

Why: When developing a clinical evaluation document (CER) for a device that is similar to already available ones, the first step is to identify and evaluate any existing clinical investigations related to the device or its class. This provides direct, device-specific evidence of safety and performance to base your evaluation on.

How this fits with the other data: After assessing clinical investigations, you supplement with other sources (e.g., literature search, adverse event reports, and clinical experience) to complete the evidence base and address gaps. Starting with clinical investigations helps you anchor the CER in primary, device-specific data before gathering broader external evidence.

Beijing, China

Anonymous User Commented on April 14, 2026
Question 1:

Correct answer: B – a reduced workload for the customer service agents.

Explanation:

A webchat bot handles many routine inquiries automatically, often 24/7, and can triage or answer common questions.

This reduces the number of tasks agents must handle, freeing them for more complex issues and enabling higher efficiency.

Increased sales or improved product reliability are not guaranteed direct outcomes of a chatbot; sales uplift is possible but not the primary expected benefit here, and product reliability is unrelated to the chatbot’s function.

Ways to measure impact include deflection rate (queries resolved by bot), agent utilization, and average handling time.

Frankfurt Am Main, Germany

Anonymous User Commented on April 14, 2026
Question 17:

This question asks for the run order of CodeDeploy hooks in an in-place deployment.

Correct answer: B — ApplicationStop -> BeforeInstall -> AfterInstall -> ApplicationStart

(Note: there can also be an optional ValidateService hook after ApplicationStart, but the option shown ends with ApplicationStart.)

Why this order:

- ApplicationStop stops the currently running application to ensure a clean upgrade. - BeforeInstall runs tasks that should occur before installing the new version. - AfterInstall handles post-install steps such as installing dependencies or moving files. - ApplicationStart starts the application with the new version. - If configured, ValidateService (health checks) can run after startup to verify the deployment.
Sydney, Australia

Anonymous User Commented on April 13, 2026
Question 12:

Correct answer: /sbin/init

Why: When using SysV init, the kernel starts the first user-space process with PID 1. That initial program is /sbin/init. It cannot exit and is responsible for starting the rest of the system (by reading /etc/inittab to determine the runlevel and starting the appropriate scripts in /etc/rc.d or /etc/init.d). The other options are not the initial program used by the kernel:

- /lib/init.so: a library, not an executable. - /etc/rc.d/rcinit: not the standard first program. - /proc/sys/kernel/init: not an executable program. - /boot/init: not a standard init program.

Quick note: On SysV systems, after /sbin/init starts, it spawns the runlevel scripts to bring the system to the desired state. Some systems may use /bin/init as a link to /sbin/init, but the key concept is that the kernel starts the initial user-space process.

Barueri, Brazil

Anonymous User Commented on April 13, 2026
Question 1:
For Question 1, the two correct options are A and D.

A. A rapid conversion of their existing SAP ERP/ECC environment to a modern, cloud-based architecture

- Why: RISE with SAP S/4HANA Cloud, private edition offers a faster, streamlined path to the cloud, reducing migration time and risk by moving to a modern cloud architecture.

D. Gaining the full Enterprise Management scope as a subscription

- Why: The offering provides the full scope of Enterprise Management available as a subscription, aligning licensing and ongoing updates with a cloud model.
Why the others aren’t correct here:

B (Reimagining processes and standardized best practices) is a benefit of transformation in general but not a specific migration advantage highlighted for this question.

C (Keep ECC 6.0 and minimize changes during migration) is not correct because you upgrade/migrate to S/4HANA; ECC 6.0 cannot be retained as-is in S/4HANA Cloud, private edition.

Gaborone, Botswana

AI Tutor 👋 I’m here to help!

Network General 1T6-220 Exam Questions 1T6-220 Switched Ethernet Network Analysis and Troubleshooting (Page 16 )

Question: 21

Question: 22

Question: 23

Question: 24

Question: 25

1T6-220 Exam Discussions & Posts

Network General 1T6-220 Exam Questions
1T6-220 Switched Ethernet Network Analysis and Troubleshooting (Page 16 )