Nutanix NCP-MCI-5.20 Exam Prep
Nutanix Certified Professional - Multi cloud Infrastructure (NCP-5.20) (Page 20 )

• A is incorrect: Flow Debugger is for debugging Salesforce Flows, not Trust Layer masking.
• B is incomplete/misleading: Requesting audit data may be part of reviewing the results, but collection and storage must first be enabled.
• C is correct: It describes the initial validation step.

• Verifies the sender’s identity using their private key.
• Confirms the transaction was not altered after signing.
• Provides evidence that the signer approved or originated the transaction.

• Digital certificates: Bind an identity to a public key, but do not themselves prove that a specific transaction was signed.
• Encrypted passwords: Protect confidentiality or authentication, but generally do not provide transaction-level nonrepudiation.
• One-time passwords: Authenticate a user for a session or transaction, but usually do not provide durable proof of who authorized the electronic record.

• The vulnerability scan identifies a vulnerability.
• The administrator verifies that the vulnerability is not present.
• Therefore, the scan produced a false positive.

• True positive: A vulnerability is reported and genuinely exists.
• False negative: A vulnerability exists, but the scan fails to detect it.
• True negative: No vulnerability exists, and the scan correctly reports no issue.

• Error correction (ECC): Improves data reliability but does not maximize bandwidth.
• RAM voltage: Increasing voltage may affect stability or speed, but it is not the primary method for increasing module bandwidth.
• Physical module size: Refers to the capacity or form factor of the RAM, not its data-transfer bandwidth.

• BCP (Business Continuity Plan): è più ampio e mira a mantenere le funzioni essenziali dell’organizzazione durante un’interruzione. Il DRP è una componente più specifica del BCP.
• Communication plan: stabilisce come comunicare con dipendenti, cittadini e altre parti interessate, ma non ripristina i sistemi.
• IRP (Incident Response Plan): gestisce la risposta iniziale a un incidente di sicurezza, come un attacco informatico, non principalmente il recupero da un disastro fisico.

• Atomicity: a write fully succeeds or does not appear.
• Consistency: table state remains valid.
• Isolation: concurrent operations do not corrupt one another.
• Durability: committed changes persist.

• Flexible schemas: common data lakes often support flexible or schema-on-read data.
• Open-source formats: common data lakes commonly use open formats such as Parquet.
• Scalable storage: cloud data lakes already provide scalable storage.

• Training or coaching
• Mentoring
• Additional support or resources
• Targeted performance improvement plans

• A: Recognition may be appropriate, but awards do not address identified gaps.
• C: Rotating schedules does not necessarily improve the specific competencies that are missing.
• D: Assessment results should be handled sensitively, but keeping them entirely private prevents useful feedback and development discussions.

• Which host first communicated with the suspected malicious source
• Whether that host initiated suspicious traffic or merely received it
• Which other hosts show evidence of infection, such as connections from the originating host
• Which hosts have no related suspicious activity and are therefore clean

• An outbound connection to a suspicious external address
• A downloaded or executed malicious file
• Later lateral connections from that host to other internal systems
• Firewall logs showing the direction and timing of the traffic

• A — Technical review by business owner: A business owner may approve the business impact, but a technical review is normally performed by technical personnel.
• C — Cost-benefit analysis after implementation: Cost-benefit analysis should occur before implementation to support the approval decision.
• D — Business continuity testing: This can be appropriate for major changes, but it is primarily part of business continuity and disaster recovery planning—not a universal change-management activity.

• An active relationship is used automatically when filters are evaluated. An inactive relationship does not propagate filters unless explicitly activated in DAX, so it would not reliably enforce the required security behavior.
• Apply security filter in both directions allows RLS filters to propagate across the relationship in both directions. This ensures that bidirectional filtering respects the RLS rules applied to both tables.
• Assume referential integrity is unrelated to RLS. It is mainly a DirectQuery optimization that allows Power BI to use an inner join when matching keys are guaranteed to exist.
• The relationship must therefore be active, with security filtering enabled in both directions.

• Shared capacity

• Fabric capacity — F SKUs

• Fabric trial capacity

• Existing Power BI Premium — P SKUs

• B. Versioned configuration files — Infrastructure is defined in machine-readable files and tracked in version control, allowing repeatable provisioning and change history.
• D. Docker files — Assuming “Doctor files” is a typo for Dockerfiles, a Dockerfile declaratively defines how to build a container image and is commonly considered infrastructure/configuration as code.

• A. Cloned virtual machine images — These are prebuilt infrastructure artifacts, but cloning an image is not itself a code-based infrastructure definition.
• C. Change management database records — A CMDB records information about infrastructure; it does not define or provision that infrastructure.

apex 
for (Account updatedAccount : Trigger.new) { 
    AccountTriggerHelper.notinyxternalSystem(updatedAccount.Id); 
}

• Too many callouts: The callout occurs asynchronously in the future method, and each future transaction can perform its permitted callouts.
• Too many SOQL queries: The SOQL query is inside the future execution, not repeatedly in the trigger transaction.
• Callout from triggers not supported: Direct callouts from triggers are prohibited, but the trigger delegates the callout to asynchronous Apex, which is the correct pattern.

• A. IDS attack signatures: An IDS mainly detects suspicious network traffic. It is not the best control for scanning uploaded documents.
• C. Load balancer: Distributes traffic among servers and can improve availability, but does not specifically detect malware.
• D. WAF: Protects web applications from attacks such as SQL injection and command injection. It may inspect web requests, but malware scanning of PDF files is not its primary function.

• Bronze: Raw ingested data
• Silver: Cleaned, validated, and transformed data
• Gold: Business-level data for analytics, dashboards, and reporting

• 25 – Traditional SMTP server-to-server mail transfer; often blocked for client submission and not inherently secure.
• 110 – POP3 for receiving email; unencrypted by default.
• 143 – IMAP for accessing email; unencrypted by default.
• 587 – Authenticated email submission and commonly secured with TLS.

• Company documents
• Databases
• Knowledge bases
• Current web or business data

• A: Describes diversity and inclusive design, not grounding.
• B: Describes explainability or model interpretability.
• D: Describes documenting a model’s capabilities and limitations.

• Distinct values = 69

• Unique values = 4

text 
user<TAB>action<TAB>status

text 
user|action|status

• Colons: Although colons commonly appear in log data, they are not a supported delimiter choice in the FX workflow described by this exam question.
• Spaces: Spaces are not treated as a supported delimiter for this extraction method; ordinary text often contains variable spacing.

• Azure Resource Manager (ARM) templates define the virtual machines and related Azure resources declaratively. You can deploy the same template repeatedly, ensuring consistent VM sizes, networking, storage, extensions, and other infrastructure settings.

• PowerShell DSC extension applies and maintains the required Windows configuration inside each VM. DSC is state-based: if a setting changes or becomes incorrect, DSC can bring it back to the desired configuration.

• Azure Pipelines deployment groups organize deployment targets, but they do not primarily enforce ongoing VM configuration.
• Custom Script Extension runs setup scripts, but it is generally less maintainable and does not continuously enforce configuration like DSC.
• Pipeline stage templates reuse pipeline workflow definitions; they do not configure the VMs themselves.

• Accept: Acknowledging the risk without taking additional action.
• Transfer: Moving the risk’s financial impact to a third party, such as an insurer.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or employee training.
• Avoid: Eliminating the activity that creates the risk.

• VPC: A logically isolated virtual network within a cloud provider; it describes network design, not the user-access model.
• NFV: Runs network services as software instead of on dedicated hardware.
• SaaS: Delivers software over the internet. Although the application may be delivered as SaaS, the question emphasizes its availability to multiple user groups, which points to multitenancy.

• Orders contains order-level information, such as the order date.
• Order Line Items contains the products, quantities, and line amounts associated with each order.
• Merging them on the order key, such as OrderID, places the order date alongside each line item. This allows you to calculate total order value and analyze it over time.
• Product attributes can remain in the Products table and be related to the resulting line-item table through ProductID.

• Merging line items with products addresses product attributes but does not first provide the order-level date and value needed for time analysis.
• DAX calculated columns or lists add unnecessary model complexity.
• Calculating order counts is not the first requirement and does not combine the required order and line-item data.

• SQL injection
• Cross-site scripting (XSS)
• Malicious or malformed web requests
• Some application-layer abuse

• Layer 4 firewall: Filters based mainly on IP addresses, ports, and connections; it lacks detailed web-request inspection.
• NGFW: Provides broader network security, but a WAF is more specialized for protecting web applications.
• UTM: Combines multiple security functions, but it is not necessarily optimized for web-application protection.

apex 
Set<Id> accountIds = new Set<Id>{ accountId1, accountId2 }; 


List<Account> accounts = [ 
    SELECT Id, Name 
    FROM Account 
    WHERE Id IN :accountIds 
];

• A: LIMIT accepts a number, not a collection of IDs.
• B: Set.containsAll() checks set contents in Apex; it does not filter SOQL results.
• C: Database.query() accepts a dynamic SOQL string, not a Set<Id> directly.

• Link-local — FE80::/10; valid only on the local link/subnet and not routed by routers.
• Multicast — FF00::/8; identifies a group of interfaces rather than a private address range.
• Global unicast — 2000::/3; publicly routable IPv6 addressing.

• AB’s own PPE: $100m
• CD’s PPE in its individual accounts: $50m
• Fair value uplift at acquisition: $40m
• Remaining useful life: 10 years
• Extra depreciation each year: $40m ÷ 10 = $4m
• Four years’ extra depreciation to 31 December 20X4: 4 × $4m = $16m
• Remaining fair value uplift: $40m - $16m = $24m

• Employees can work from any location, including remote sites and offices worldwide.
• Login can be relatively seamless after the device is registered.
• It does not require distributing additional physical authentication equipment.

• Geotagging: Identifies location, but location alone is not a strong authentication method and may prevent legitimate remote access.
• Smart cards: Provide strong authentication but require card readers and physical cards, increasing equipment and management requirements.
• Time-based logins: Typically involve one-time codes that users must enter, making the experience less seamless and potentially requiring a token or authenticator app.

• Input validation: Prevents malicious or malformed input within an application; it does not authenticate a software package.
• Secure cookies: Protect web-session cookies; they do not protect downloadable software.
• Fuzzing: Tests software by supplying unexpected input to find vulnerabilities; it does not verify software integrity.

• A: Concerns task scheduling and avoiding missed runs, not directly sizing the warehouse.
• B: The amount of data in a stream alone does not reliably determine compute needs; the SQL processing is what matters.
• D: A multi-cluster warehouse addresses concurrency, not the compute size needed for one task execution.

• JobTitle: User1 and User3 only
• UsageLocation: User1, User2, and User3

• For a user whose source of authority is Windows Server Active Directory, attributes such as JobTitle are synchronized to Microsoft Entra ID. You must change them in on-premises AD; editing them in Entra ID is not allowed or will be overwritten.
• UsageLocation is a cloud-managed attribute used mainly for licensing and service availability. It can be set or changed in Microsoft Entra ID, including for synchronized users.

• httprint fingerprints Web servers by analyzing their HTTP responses. It can help identify the Web server type and sometimes its version, even when the banner has been modified or hidden.
• Wget is mainly used to download files or Web content.
• WinSSLMiM is associated with SSL man-in-the-middle testing.
• Whisker is an older Web-server vulnerability assessment tool, especially associated with IIS, rather than the expected banner-grabbing tool here.

• Physical: Protects facilities or equipment, such as locks and security cameras.
• Technical: Uses technology, such as firewalls, encryption, or access controls.
• Operational: Covers day-to-day actions and processes, such as training, backups, or incident response.
• Managerial: Includes policies, standards, risk assessments, and procedures.

• Espionage: Stealing information for intelligence or competitive purposes.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: An attack sponsored or conducted by a government.
• Shadow IT: Unapproved technology or methods used to access organizational resources.

• transform() — modifies every element in an array
• filter() — keeps elements matching a condition
• exists() — checks whether any element matches
• aggregate() — reduces array elements to one result

sql 
SELECT transform(scores, x -> x * 2) 
FROM student_scores;

• A is incorrect because higher-order functions are mainly useful for nested or complex data.
• B is incorrect because they do not convert logic into Python.
• D is incorrect because their purpose is not to fix slow built-in functions, but to process arrays or maps with custom logic.

• Create the field in the CRM on the relevant person records—typically Lead and Contact in Salesforce.
• Give the Marketo Sync User read/write access to the field.

• state preserves the client’s original context, such as the specific idea URL the user requested.
• The portal sends that value in the OAuth authorization request.
• Salesforce returns it after authorization, allowing the portal to redirect the user to the original idea rather than the Ideas home page.

DAX 
Previous Year Sales = 
CALCULATE( 
    [Total Sales], 
    PARALLELPERIOD('DATE'[Month], -1, YEAR) 
)

• CALCULATE evaluates [Total Sales] after modifying the filter context.
• PARALLELPERIOD shifts the current date period. -1 moves it backward, and YEAR specifies a one-year shift.
• 'DATE'[Month] is the date column used for the time calculation. In a proper date table, this should be a real date column or an appropriate calendar column—not merely text such as "January".

• Initial Intrusion: The compromised VPN account and stolen phishing credentials describe how the attacker first gained access, but that happened months earlier.
• Persistence: The scheduled tasks and recurring C2 connections show how the attacker maintained and automated continued access.
• Search and Exfiltration: This would involve locating and transferring data. The scenario does not primarily describe data discovery or theft.
• Cleanup: Cleanup involves removing evidence or covering tracks. Obfuscated scripts may make detection harder, but the main behavior here is maintaining access.

• Crowd-sourced evaluation: Requires recruiting and managing many evaluators.
• Human-worker evaluation: Provides human judgment but requires coordination, labeling instructions, and quality control.
• RLHF: Is a training and alignment process, not simply a low-overhead model comparison method.
• Automatic model evaluation: Quickly evaluates outputs using predefined toxicity or quality metrics with minimal manual effort.

• A password cracker would normally be identified by behavior such as loading password hashes or attempting dictionary/brute-force attacks.
• The question describes a routine audit, not password recovery.
• Simply encountering a protected file during an audit is characteristic of a misconfigured or insufficiently privileged FIM.

• A — Use getRecordTypeInfosByDeveloperName()

apex 
  Id rtId = Schema.SObjectType.Account 
      .getRecordTypeInfosByDeveloperName() 
      .get('Business_Account') 
      .getRecordTypeId();

• C — Query the RecordType object

apex 
  RecordType rt = [ 
      SELECT Id 
      FROM RecordType 
      WHERE SObjectType = 'Account' 
      AND Name = 'Business Account' 
      LIMIT 1 
  ];

• B: An outbound SOAP call is unnecessary and inefficient.
• D: Hardcoding an ID is not dynamic, and IDs can differ between orgs.

• Disabling a compromised account
• Blocking a malicious IP address
• Isolating an endpoint
• Creating or escalating an incident ticket

• Virus signatures: Primarily associated with antivirus or endpoint protection.
• Security agent deployment: Usually handled by endpoint-management or security-agent platforms.
• Vulnerability scanning: Typically performed by vulnerability-management tools.

• DB1 (500 TB): Azure Data Box Heavy

• Virtual machines: Azure Migrate

• Keep earlier prompt versions.
• Identify the last version that produced acceptable output.
• Restore it as a baseline.
• Make small, controlled changes—ideally one significant change at a time.
• Test the output after each change.

• A: Discards useful information about what worked.
• B: Large simultaneous changes make it difficult to identify the cause of problems.
• D: Accepts output that does not meet the requirements.

• Correct exam answer: A — HKEY_LOCAL_MACHINE
• The relevant location is associated with HKEY_LOCAL_MACHINE\SAM.
• The SAM does not store passwords in plain text; it stores password hashes.

• HKEY_CURRENT_USER contains settings for the currently logged-in user, not the account-password database.
• HKEY_USERS contains user profiles and settings loaded for users.
• HKEY_CURRENT_CONFIGURATION contains hardware/profile configuration information.

• Determining ISP-assigned address space: Usually involves public reconnaissance, such as WHOIS or regional Internet registry information.
• Bypassing DNS sinkholing: Would require evidence that malicious domains are resolving outside the organization’s sinkhole controls.
• Achieving initial access: DNS log entries alone do not demonstrate compromise or entry.
• Exfiltrating data: DNS tunneling generally involves repeated queries containing encoded or unusually long data, not merely internal host discovery.

• The S3 bucket as an origin for static content
• The Application Load Balancer (ALB) as an origin for dynamic content
• An Amazon Route 53 alias record pointing the application domain to CloudFront

Why this works

• Static data: CloudFront caches objects from S3 at edge locations, reducing latency for users worldwide.
• Dynamic data: CloudFront forwards requests that require application processing to the ALB. It can also maintain persistent connections and use the AWS global edge network to improve delivery performance.
• One domain: CloudFront behaviors can route different path patterns to different origins—for example, /static/* to S3 and other paths to the ALB.

Why the other options are incorrect

• Global Accelerator is designed primarily for accelerating traffic to applications with endpoints such as ALBs, not for caching S3 content.
• Using separate domains or splitting static and dynamic traffic adds unnecessary complexity.
• CloudFront already provides the required global edge distribution and caching, so combining it with Global Accelerator is unnecessary here.

• D — Value analysis: Correct. It examines an existing product to identify ways of reducing its cost while still providing the required functions, quality and reliability.
• E — Kaizen costing: Correct. It involves making continuous, small improvements and cost reductions while the product is already in production.

• Functional analysis: It is not limited to minimizing the cost of the originally defined functions. It examines what functions are required and how they can be provided at the lowest overall cost.
• Value engineering: Usually applies to the design and development of a new product, rather than being a fundamental redesign of existing organisational processes. That description is closer to business process re-engineering.
• Target costing: The target cost is generally established during the product development stage, before production begins. It is not continuously reset while the product is in production.

• Due diligence: Investigating and evaluating a third party before entering into or continuing a business relationship.
• Attestation: An independent party provides assurance about an organization’s claims or controls. A SOC 2 examination is an example of an attestation engagement, but the analyst requesting and reviewing the report is performing due diligence.
• Internal audit: Reviews the organization’s own internal controls.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.