Nutanix NCP-MCI-6.10 Exam Prep
Nutanix Certified Professional - Multicloud Infrastructure v6.10 (Page 2 )

• A separate scope using a /32 subnet: A /32 identifies one host, but it is not a practical DHCP scope for this purpose.
• A static IP within the DHCP range: This can cause an IP address conflict if DHCP assigns that address to another device.
• SLAAC: Used for automatic IPv6 address configuration, not for assigning a predictable IPv4 address through DHCP.

• Idioma: “Responda em português.”
• Tamanho: “Responda em até três frases.”
• Formato: “Use uma lista com três recomendações.”
• Objetivo: “Recomende produtos com base nas necessidades do cliente.”

• Mudar o tamanho do LLM: pode alterar capacidade e custo, mas não garante idioma ou respostas curtas.
• Aumentar a temperatura: aumenta a criatividade e a aleatoriedade; não controla diretamente o tamanho ou idioma.
• Aumentar o Top K: permite considerar mais tokens prováveis, aumentando a variedade; também não é o mecanismo principal para controlar idioma ou comprimento.

json 
{ 
  "Effect": "Deny", 
  "NotAction": [ 
    "iam:*", 
    "route53:*", 
    "cloudfront:*", 
    "support:*" 
  ], 
  "Resource": "*", 
  "Condition": { 
    "StringNotEquals": { 
      "aws:RequestedRegion": "eu-west-1" 
    } 
  } 
}

• SCPs set maximum permissions; they do not grant permissions. The default SCP allows actions, so the restriction must be an explicit Deny.
• aws:RequestedRegion checks the Region targeted by an API request.
• StringNotEquals: eu-west-1 denies requests directed to every other Region.
• NotAction allows designated global services to remain usable because they do not operate in a single AWS Region.
• Attaching the SCP to the OU makes it apply to existing accounts and accounts later added to that OU.

• SAMLRequest: the SAML authentication request
• RelayState: the original destination or application state

• RedirectURL: not the standard SAML parameter for preserving the original request.
• DisplayState: not a standard SAML SSO parameter.
• StartURL: Salesforce-related terminology, but not the standard parameter used in this SAML exchange.

• Conserve public IPv4 addresses: IPv4 addresses are limited, so many internal devices share a smaller number of public addresses through NAT.
• Reduce direct exposure: Private addresses are not directly routable from the public Internet, which helps reduce unsolicited access to internal devices.

• Secret scope: A named container that groups related secrets and defines access permissions. Example: finance-prod.
• Secret key: The name of an individual secret stored inside that scope. Example: db-password.

text 
Scope: finance-prod 
  Key: db-username 
  Key: db-password

python 
dbutils.secrets.get( 
    scope="finance-prod", 
    key="db-password" 
)

• Who performed the action
• What action occurred
• When it occurred
• Where it originated
• Whether it succeeded or failed

• Investigating suspicious activity: Important, but investigation depends on having adequate audit data first.
• Storage allocation: Necessary for retention, but storage does not help if the records lack meaningful details.
• Actions after audit failure: Part of operational planning, not the primary assessment of the application’s audit capability.

• A: My Domain is required for many SSO configurations, but if SSO works, it is unlikely to be the cause of losing the target record.
• B: HTTP-POST is a valid SAML binding and does not inherently prevent redirection.
• D: An incorrect Federation ID generally causes authentication or user-matching failure—not successful login to the home page.

1. Remote access to a Windows PC
2. Full chat and optional game-console functions

• Windows Remote Desktop (RDP) uses TCP 3389. The router needs a port-forwarding rule that sends incoming traffic on that port to the Windows PC’s internal IP address.
• The game console should connect through the wireless AP. Using WPA2-PSK provides the required wireless security while allowing normal online, chat, and optional services.
• The firewall should separate the internal network from the screened subnet. Its screened-subnet-side address is shown as 10.100.0.1.
• Devices must be placed in the correct network locations: the PC behind the router, the console on the wireless AP, and the firewall between the appropriate network segments.

• Premium file shares: contoso104 only
• Blob access tiers: contoso101, contoso102, and contoso103

• Premium Azure Files shares require a storage account with the FileStorage account kind. This is a specialized account type and is not used for blob storage.
• Blob access tiers such as Hot, Cool, and—where supported—Archive apply to blob-capable accounts, such as General-purpose v2 or BlobStorage accounts shown in the exhibit.
• contoso104 is therefore excluded from the blob-tier selection because it is the premium Files account.

• SageMaker endpoint: Not required because the model is being used through Amazon Bedrock.
• SageMaker Model Registry: Used for managing SageMaker models, not for making a Bedrock custom model available.
• Grant access in Amazon Bedrock: IAM permissions may still be needed, but granting access alone does not provide the required inference capacity.

• Application management: Controls which apps can be installed or used; it does not remove existing data after theft.
• Full-disk encryption: Protects data when the device is powered off or locked, but it may not help if the attacker has already unlocked the device.
• Containerization: Separates corporate data from personal data, but the attacker may still access the corporate container using the stolen credentials.

• A: Using an external OAuth 2.0 identity provider could provide unified identity, but it does not specifically address Salesforce capacity or high-volume login limits.
• B: Making the Experience Cloud community a SAML identity provider and using JIT provisioning is a possible federation pattern, but it may not be appropriate for this scale without Salesforce validation.
• C: A default account is unrelated to solving identity unification and high login throughput. Person Accounts can be supported in appropriate B2C Commerce integrations.

• Accept: Acknowledge the risk and choose not to take additional action.
• Transfer: Shift the risk or its financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reduce the likelihood or impact of the risk, such as by implementing security controls.
• Avoid: Eliminate the activity or condition that creates the risk.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity and usually alerts rather than directly scanning and blocking uploaded files.
• C. Load balancer: Distributes traffic among servers but does not inspect files for malware.
• D. WAF: Protects web applications from attacks such as SQL injection, cross-site scripting, and some malicious requests. It is not primarily a PDF-malware scanning solution.

• C — “when the query finishes”

• D — “when the query began”

• GPU: A failure may cause no video output, but the PC usually still powers on.
• RAM: Can prevent booting or produce error beeps, but fans and power indicators generally work.
• CPU: Can prevent startup or booting, but it usually does not cause a completely lifeless system.

• Pull: Downloads changes from the central repository and updates the local repository.
• Push: Sends local commits to the central repository.
• Commit: Records local changes in the repository’s history.
• Merge: Combines changes from different branches.
• Clone: Creates a new local copy of a repository.

• Regional leads — Customer Community Plus

• Capacity planners — External Identity

• Customer Community does not provide the enhanced reporting/dashboard access required by regional leads.
• An Identity license is generally for internal Salesforce identity use and does not fit the external capacity-planning users as well as External Identity.

• The target API uses HTTPS, so Mule must validate the server’s TLS certificate.
• The TLS configuration is set to None, meaning no custom truststore is configured.
• Mule therefore uses the JRE’s default truststore to determine whether the target certificate is trusted.
• If the issuing CA certificate is in that truststore, the TLS handshake can succeed.
• If it is absent—or the certificate is otherwise invalid—the request fails with a TLS/handshake error.

• Two VMs
• Distributed across two separate availability zones

• Writing with Apache Spark, typically as Delta tables.
• Reading with Apache Spark for processing and analysis.
• Reading with T-SQL through the lakehouse’s automatically generated SQL analytics endpoint.
• Reading with KQL through Fabric’s query capabilities that can access lakehouse data.

• Eventhouse: Optimized for real-time and KQL workloads, but it is not the natural destination for Spark-based writes or general lakehouse storage.
• Datamart: Intended mainly for relational analytics and Power BI; it is not designed for Spark-based data ingestion.
• Warehouse: Primarily T-SQL-based and structured. It does not provide the same native Spark write experience or flexibility for semi-structured data.

• ?????? CPU
• ?????????????????
• ??????????????????????????
• ???????????? throughput
• ??????????????????????????????

• A ??????? system software ????????????????????????????????? ??????????????????????????????????
• B ?????????????????????????? ????????????????????????? ?????????????????????????????
• D ????????????????????????? ?????????????? ?????????????????????????????????????????

• principal represents the source or initiating system.
• principal.port is the source port.
• target represents the destination system.
• target.port is the destination port.

text 
principal.port = 5555

• network.ApplicationProtocol = HTTP identifies HTTP traffic but not the backdoor specifically.
• target.port = 5555 finds traffic going to port 5555, rather than originating from it.
• network.ip_protocol = TCP is too broad because many services use TCP.

• B: Moving the task may affect the critical path and should not be done before evaluating the planned response and impacts.
• C: Excluding a required task is not appropriate without formal analysis and stakeholder approval.
• D: Lessons learned and the risk log should be updated, but only after or alongside managing the immediate issue; updating them is not the first action.

• Elicited and documented customer requirements
• Converted them into clear, measurable specifications
• Validated the requirements with the customer
• Used them as the basis for design, quality checks, and acceptance

• A: Requirements should reflect the customer’s needs—not the supplier’s standards.
• B: Iteration review planning does not replace proper requirements collection.
• D: A retrospective occurs after work is completed and is mainly for process improvement, not initial requirements definition.

• Product Owner: May attend, but is not required unless also working as a Developer.
• Scrum Master: May attend to help facilitate or coach, but is not required.
• Developers: Must participate because the event is specifically for them.

1. Create a new AMI or copy the existing AMI while specifying EBS encryption and an appropriate AWS KMS key.
2. This creates an encrypted AMI backed by encrypted EBS snapshots.
3. Copy the encrypted AMI to the destination Region, using a KMS key available there.
4. Launch the application stack from the encrypted AMI.

• B: AWS KMS does not encrypt an existing unencrypted AMI in place. You must create an encrypted copy.
• C: AWS Certificate Manager manages TLS certificates, not EBS or AMI encryption.
• D: Enabling encryption by default affects newly created EBS volumes and snapshots; it does not encrypt an existing unencrypted AMI during copying.

• Review the risk register.
• Use the previously defined risk response plan, such as assigning a backup resource, reprioritizing work, or using another qualified engineer.
• Implement the response promptly because the task is on the critical path.

• B: Revising the schedule without first applying the planned response may be premature.
• C: Excluding a required task could compromise the project’s objectives and requirements.
• D: Updating the risk and lessons learned records is appropriate, but it should happen after managing the immediate issue, not as the next primary action.

1. Download the updated VPN client configuration package from the Azure VPN gateway.
2. Remove or update the existing VPN client configuration on the Windows 10 workstation.
3. Install the new package and reconnect.

Flat organisation

• Few levels of management
• A wide span of control—managers supervise many employees
• Shorter communication channels
• More employee autonomy and quicker decisions
• Fewer formal promotion levels

Tall organisation

• Many levels of management
• A narrow span of control—managers supervise relatively few employees
• A clear hierarchy and reporting structure
• More formal supervision and communication channels
• More obvious promotion and career stages

• Tactics: The attacker’s overall goal, such as gaining persistence or exfiltrating data
• Techniques: The methods used to achieve that goal
• Procedures: The specific implementation or sequence of actions

• IP addresses and hash values: Useful indicators, but they can change quickly.
• Indicators of compromise: TTPs may help identify IOCs, but their main value is describing behavior.
• Tools: Attackers can replace tools or use legitimate administrative utilities.

• Data loss prevention (DLP): Helps detect or prevent unauthorized data transfers, but does not directly protect data on a stolen, powered-off laptop.
• Operating system hardening: Reduces vulnerabilities and attack surface, but does not adequately protect stored data if the device is stolen.
• Boot security: Helps prevent unauthorized operating systems or boot media from loading. It supports device security but is not the primary solution for protecting the data itself.

• Leadership and stakeholder commitment
• Business capability and skills
• Organizational culture
• Availability of resources
• Ability to manage and sustain change
• Impact of the proposed transformation

• How ready the organization is
• Which areas require urgent attention
• How difficult each issue may be to resolve
• Risks that could affect implementation

• A: Places the assessment in Phase B and refers vaguely to creating views; this is not the prescribed technique.
• B: An Implementation Factor Assessment and Deduction Matrix is not the primary TOGAF technique described for business transformation readiness.
• D: A Business Scenario helps identify requirements and stakeholder concerns, but it is not the main technique for assessing organizational readiness.

• A. Extranet
• B. VLAN
• C. Intranet
• D. VPN

• Define the contractor’s deliverables, responsibilities, acceptance criteria, and deadlines.
• Agree on a reporting cadence to monitor progress.
• Allow the local company to use its expertise and manage its own work.

• A: “Under the supervision of the project manager” suggests excessive direct control and is less empowering.
• B: Micromanaging prevents the contractor from functioning independently and is inefficient.
• D: Deploying the contractor’s staff under the PM’s supervision creates a staffing/control arrangement rather than empowering the contracted company.

• Drops packets when traffic exceeds a certain bitrate: This describes traffic policing, not shaping.
• Fragments large packets and queues them: Shaping does not fragment packets as its primary congestion-control action.
• Drops packets randomly from lower-priority queues: Packet dropping may occur if a shaping queue becomes full, but it is not the defining behavior.

• Shaping: buffers and delays excess traffic.
• Policing: drops or marks traffic that exceeds the configured rate.

• Generates a syslog message
• Shuts down the PoE port
• Places the port into error-disabled (err-disabled) state
• Frees the power allocation

• A device starting to draw power does not necessarily generate a syslog message.
• Monitoring does not pause data traffic while checking power.
• Drawing less than the configured minimum does not automatically mean the device has failed and should be disconnected.

• Use private connectivity from a cloud provider
• Set up SSO for federated authentication

• Private connectivity—such as a cloud provider’s private endpoint—keeps Snowflake access within the company’s private network path instead of exposing access over the public internet. This fits the VPN/VDI requirement.
• SSO for federated authentication allows Snowflake users to authenticate using the credentials already managed by the company’s identity provider—the same identity system used for VDI—eliminating separate Snowflake passwords.

• Tri-Secret Secure protects encryption keys; it does not provide private network access or credential reuse.
• A proxy Snowflake account outside the VPN conflicts with the requirement that Snowflake have no internet visibility and is not the normal solution for federated login reuse.

• A. Implement retries with exponential backoff

• C. Reduce the frequency and/or size of requests

• B. Use PutRecord instead of PutRecords — PutRecord sends one record per call and does not remove the underlying throughput limitation. It may increase request overhead.
• D. Use Amazon SNS instead — SNS is not a direct fix for Kinesis shard throttling and changes the required streaming architecture.
• E. Reduce KCL consumers — KCL consumers read from Kinesis; they do not solve producer-side PutRecords throttling.

• Field name and label
• Data type
• Reference table
• Default value
• Whether the field is mandatory or read-only
• Field attributes and configuration

• A: Labels and translations are handled through documentation and translation-related records.
• C: Table relationships may be represented through reference fields, but this is not the primary description of the Dictionary.
• D: Spell-checking language data is unrelated to the System Dictionary.

• Basic: Self-help only; no technical support or design assessment.
• Developer/Standard: Technical support, but generally not the full proactive architecture guidance required here.
• Professional Direct: Includes proactive guidance and architecture recommendations.
• Premier: Also supports this, but is not the minimum-cost option.

• Progress iteratively with feedback focuses on making improvements in manageable steps and learning from feedback.
• Optimize and automate focuses on maximizing value from resources and automating suitable activities.
• Start where you are focuses on assessing the current situation and reusing what already exists.

• Increase/decrease the number of epochs: Changes how long training runs, but does not reuse a pre-trained model.
• Unsupervised learning: Trains from unlabeled data and does not specifically address adapting an existing model.

• B: Trigger.Once + scheduled job

• C: 10-minute processing-time trigger

• Equipment and hardware
• Facilities
• Inventory
• Backup media
• Supplies stored at an alternate or remote location

• Personal belongings of staff: Usually not organizational assets.
• DR line-item revenues: Revenue is a financial impact, not a physical asset.
• Cloud-based applications: These are primarily logical or information-processing assets, even though they depend on physical infrastructure.

• A single Construction Job can use multiple Machinery records.
• A single Machinery record may be used on multiple Construction Jobs.
• This is a many-to-many relationship, which Salesforce models using a junction object.
• The junction object can contain fields such as:

• Master-detail to Machinery
• Master-detail to Construction Job
• Date and cost fields

• Wiping securely overwrites the drive so the original data cannot reasonably be recovered. It is generally less expensive than physically destroying the device.
• Recycling could expose the data if the drive is not securely erased first.
• Shredding physically destroys the drive and is effective, but usually more costly and prevents reuse.
• Deletion only removes file references; it is not a secure sanitization method.

• Multi-factor authentication
• A secure password change for users whose credentials may be compromised