OutSystems Associate-Reactive-Developer Exam Prep
Associate Reactive Developer (OutSystems 11) (Page 27 )

• A) Entities do not require an identifier. False. In OutSystems, an Entity must have an identifier (a primary key) to uniquely identify records.
• B) Entities are only stored in memory. False. Entities are persisted in the database; they are not limited to in-memory storage.
• C) Entities have attributes. True. Entities define attributes (fields) that describe the data.
• D) Entities can be created, updated, and deleted. True. CRUD operations apply to Entities.

• Valor maior: mais aderência às instruções e aos detalhes descritos.
• Valor menor: mais liberdade criativa e resultados potencialmente mais variados.
• Valor excessivamente alto: pode causar artefatos ou imagens menos naturais.

• Aumentar o número de passos de geração: pode melhorar qualidade e refinamento, mas não é o principal controle de especificidade do prompt.
• MASK_IMAGE_BLACK: relaciona-se ao uso de máscara em geração ou edição de imagens, não à especificidade textual.
• Prompt strength: é mais associado à força do prompt em processos como image-to-image; nesta questão, o parâmetro diretamente ligado à aderência textual é o CFG scale.

• Restarting the device: May fix software glitches, but would not usually make cable orientation matter.
• Swollen battery: A safety concern, but it would not typically cause recognition only in one cable orientation.
• Failing cable: Possible, but less likely because the problem occurs with this particular device and not other devices of the same type.

• Issuer: Identifies the party issuing a SAML message, commonly the IdP in the SAML assertion. It is not the Salesforce setting used to distinguish Salesforce from other service providers.
• Identity Provider Login URL: Specifies where Salesforce sends users for authentication; it does not identify Salesforce.
• SAML Identity Location: Specifies where the user identity is found in the SAML assertion, such as the subject or an attribute.

• Review the risk register.
• Use the previously defined risk response plan, such as assigning a backup resource, reprioritizing work, or using another qualified engineer.
• Implement the response promptly because the task is on the critical path.

• B: Revising the schedule without first applying the planned response may be premature.
• C: Excluding a required task could compromise the project’s objectives and requirements.
• D: Updating the risk and lessons learned records is appropriate, but it should happen after managing the immediate issue, not as the next primary action.

• A: Using an external OAuth 2.0 identity provider could provide unified identity, but it does not specifically address Salesforce capacity or high-volume login limits.
• B: Making the Experience Cloud community a SAML identity provider and using JIT provisioning is a possible federation pattern, but it may not be appropriate for this scale without Salesforce validation.
• C: A default account is unrelated to solving identity unification and high login throughput. Person Accounts can be supported in appropriate B2C Commerce integrations.

• IaaS: You deploy and manage virtual machines, operating systems, disks, and networking. Azure manages the physical datacenter and host infrastructure.
• PaaS: Azure manages the operating system and runtime so you can focus on deploying applications, such as with Azure App Service or Azure Functions.
• SaaS: You consume a complete, provider-managed application.

• A recipient who already has a Microsoft account or an organizational account can authenticate by signing in.
• A recipient without a usable Microsoft identity may receive a one-time passcode by email.
• The passcode is sent to the same email address that was invited and is used to verify ownership of that address.

• 2000::/3 — Global unicast, used for publicly routable IPv6 addresses.
• FC00::/7 — Unique local, used for private internal addressing.
• FE80::/10 — Link-local, used only on the local network segment and not routed between subnets.

• BCP (Business Continuity Plan): Ensures the organization can continue its broader business operations during and after a disruption. It is broader than the IT-focused recovery required here.
• Communication plan: Defines how information is shared with employees, the public, and other stakeholders; it does not restore systems.
• IRP (Incident Response Plan): Handles and contains security incidents, such as malware or unauthorized access. A tornado is a disaster, not primarily a cybersecurity incident.

• The user starts in the corporate portal.
• The portal launches the Salesforce resource.
• The IdP sends the SAML response to Salesforce.

• Connected App + OAuth is for OAuth authorization and API/app access, not this SAML-based seamless login scenario.
• SP-initiated SSO would begin when the user first requests the Salesforce resource and Salesforce redirects them to the IdP. That is not the described starting point.

• Compare each server’s drive specifications and performance data.
• Identify the drive that is faulty, slow, or mismatched.
• Replace it with a drive that matches the required interface, capacity, and performance characteristics.
• Avoid selecting a slower drive, because storage performance can bottleneck the entire server.
• In a redundant array, use a compatible replacement so rebuilding does not create unnecessary performance degradation.

• Separate accounts/domains create a strong administrative boundary between non-production and production.
• Separate projects provide distinct IAM boundaries, billing, quotas, service accounts, and resources.
• Developers can receive permissions in the development project without automatically gaining access to production.
• Production administrators can be restricted from development resources, supporting separation of duties and least privilege.

• A: Creates excessive project fragmentation without being required by the stated requirement.
• C: Keeps development and production under one account and does not clearly separate administrative duties.
• D: Uses one account and only two projects; it provides some project isolation but weaker organizational separation.

• Workspace: Stores notebooks, libraries, jobs, and other project resources.
• Notebooks: Interactive documents containing code, queries, visualizations, and explanations. Common languages include Python, SQL, Scala, and R.
• Clusters: Groups of virtual machines that run Spark workloads. Clusters can be started, stopped, and automatically scaled.
• Data access: Databricks can read from services such as Azure Data Lake Storage, Azure Blob Storage, and Azure SQL.
• Jobs: Automate notebooks or data-processing workflows on a schedule or in response to events.

• SageMaker endpoint: Not required because the model is being used through Amazon Bedrock.
• SageMaker Model Registry: Used for managing SageMaker models, not for making a Bedrock custom model available.
• Grant access in Amazon Bedrock: IAM permissions may still be needed, but granting access alone does not provide the required inference capacity.

• Import: Copies data into the Power BI model. It requires scheduled or manual refresh, so it may not meet the two-minute requirement.
• Live connection: Connects to an existing Power BI semantic model or Analysis Services model; it is not the appropriate choice for connecting directly to the Azure SQL database in this scenario.

• Reviewing security policies and standards checks whether controls are documented, not whether they work.
• Reviewing security logs may show that monitoring is occurring, but does not directly establish that preventive controls are effective.
• Analyzing technical security practices is broad and may assess implementation, but it is less objective than an actual controlled attack.

• Design/compliance effectiveness: policies, standards, and procedures
• Operational effectiveness: logs, records, and evidence that controls operate
• Technical security effectiveness: penetration testing or vulnerability testing

• Data loss prevention (DLP): Helps detect or prevent unauthorized data transfers, but does not directly protect data on a stolen, powered-off laptop.
• Operating system hardening: Reduces vulnerabilities and attack surface, but does not adequately protect stored data if the device is stolen.
• Boot security: Helps prevent unauthorized operating systems or boot media from loading. It supports device security but is not the primary solution for protecting the data itself.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity and usually alerts rather than directly scanning and blocking uploaded files.
• C. Load balancer: Distributes traffic among servers but does not inspect files for malware.
• D. WAF: Protects web applications from attacks such as SQL injection, cross-site scripting, and some malicious requests. It is not primarily a PDF-malware scanning solution.

• Azure Cosmos DB is a globally distributed NoSQL database service. It stores and retrieves application data, but it does not provide the tools needed to build, test, and deploy predictive analytics models.
• Azure Machine Learning—including the historical Azure Machine Learning Studio—is designed for the machine-learning lifecycle:

• Import mode loads the data into the Power BI model. Visuals query the in-memory model, which generally provides faster calculation and rendering than DirectQuery.
• Import mode also minimizes online processing because report interactions do not send queries back to the dataflow or SQL Server.
• A daily refresh can load data through the previous day, satisfying the freshness requirement without unnecessary hourly processing.

• DirectQuery keeps querying the data source or dataflow during report use, increasing online processing and potentially slowing visuals.
• Adding a gateway enables connectivity for on-premises sources, but it does not remove the performance disadvantages of DirectQuery.
• An hourly Power Automate refresh is unnecessary when the requirement is only data through the previous day and creates additional processing overhead.

• staff use the new system;
• transactions and reports are checked;
• problems are corrected;
• feedback is collected.

• Phased changeover: different parts or functions are introduced in stages, often according to a planned sequence.
• Pilot changeover: one representative department, branch or group acts as a test site before wider implementation.
• Parallel changeover: old and new systems operate at the same time.
• Direct changeover: the old system is stopped and the new one starts immediately.

• Prevent connections to malware command-and-control servers
• Identify infected systems making those DNS requests
• Collect information for incident response

• A: Attackers do not normally use sinkholes to map a company’s domain structure.
• B: Redirecting employees from legitimate sites to attacker-owned sites describes malicious DNS manipulation, not a defensive sinkhole.
• D: Attracting attackers away from real resources is more closely associated with a honeypot or deception system.

• Secure: uses encryption, such as HTTPS or SFTP.
• Cross-platform: supported by many languages and operating systems.
• Internet-friendly: designed to communicate across networks, usually using standard Internet protocols.

• JSON/REST over HTTPS — widely supported, secure, and Internet-friendly.
• SOAP over HTTPS — also secure and highly cross-platform, though more heavyweight.
• XML over SFTP — secure file-based exchange, but it is not an API-style interface.

• SQL injection
• Cross-site scripting (XSS)
• Malicious file uploads
• Common web-application exploits

• Layer 4 firewall: Filters primarily by IP addresses, ports, and transport protocols; it lacks detailed web-application inspection.
• NGFW: Provides advanced network filtering and may include application awareness, but a WAF is more specialized for protecting web applications.
• UTM: Combines several security functions in one device, but it is not specifically focused on web-application attacks.

• A single Construction Job can use multiple Machinery records.
• A single Machinery record may be used on multiple Construction Jobs.
• This is a many-to-many relationship, which Salesforce models using a junction object.
• The junction object can contain fields such as:

• Master-detail to Machinery
• Master-detail to Construction Job
• Date and cost fields

bash 
docker run -it microsoft/azure-cli:0.10.17

• docker run starts an Azure CLI container; it does not automatically connect to the AKS cluster.
• The command does not run kubectl apply.
• The container would need the appropriate Kubernetes tools and AKS credentials.
• The device or container must obtain cluster credentials, typically using an AKS credential command, before running Kubernetes commands.

bash 
az aks get-credentials --resource-group <resource-group> --name <aks-cluster> 
kubectl apply -f myapp.yaml

• You normally do not create a new sensitive information type for credit card numbers. Microsoft Purview already provides a built-in Credit Card Number sensitive information type.
• The required sequence should generally be:

• Monitoring: Detects activity but does not remove the underlying risk.
• Patching: Useful for systems that must remain operational, but these desktops are unused.
• Isolating: Can be a temporary containment measure, but permanently removing unnecessary systems is more appropriate.

• nomes de pessoas;
• organizações;
• locais;
• datas;
• números de processos;
• leis ou contratos.

• NER = identifica informações específicas e classificáveis.
• Sumarização = reduz um documento e apresenta seus pontos principais.

• 6-phone boxes: 6x
• 8-phone boxes: 8x

• Used for communication on the local link or LAN segment
• Automatically generated on IPv6-enabled interfaces
• Not routed by routers to other networks
• Commonly used by devices to communicate with their local IPv6 router
• Begins with FE80 through FEBF

• FC00::/7 — unique local unicast
• FE80::/10 — link-local unicast
• FF00::/8 — multicast
• 2000::/3 — global unicast

• The Subscribe to Reports user permission.
• At least Viewer access to the report’s folder.
• Access to the report itself.

• Subscribe to Reports: Run Reports is not the relevant Salesforce permission.
• Chatter Subscribe to Reports is not a Salesforce permission.
• Set Running User relates to configuring the user whose permissions determine report results—not subscribing to a report.

• A vulnerability scanner automates discovery of known vulnerabilities and misconfigurations across systems. It can contribute to a supply-chain assessment.
• A penetration test actively attempts exploitation and is usually limited to an agreed scope.
• SCAP standardizes vulnerability and configuration assessment data; it is not the analysis itself.
• Illumination tool is not a commonly defined CompTIA Security+ term.

• A — IDS attack signatures: An IDS generally detects suspicious network activity but does not necessarily scan uploaded PDF files or prevent them from being accepted.
• C — Load balancer: Distributes traffic among servers; it does not inspect files for malware.
• D — WAF command-injection blocking: A WAF can help block web attacks such as command injection, SQL injection, and cross-site scripting, but this option does not specifically address malicious PDF uploads.

python 
def add_integers(a, b): 
    return a + b

• Uses def to define a function.
• Accepts two parameters, a and b.
• Uses return to send their sum back to the caller.
• Uses indentation to define the function body.

python 
result = add_integers(3, 4) 
result is 7

Correct choices

• DB1: Azure Data Box Heavy
• Virtual machines: Azure Migrate

Why

• Replication with minimal downtime
• A test migration
• Final cutover after validation

• Continuous deployment: Automates software releases; it does not specifically test input handling.
• Static code analysis: Examines source or compiled code without executing it. It can find coding flaws but does not directly stress the application with malformed inputs.
• Manual peer review: Developers inspect code or design manually. Useful, but not the best practice specifically for testing how a live product handles invalid input.

• Product Owner: May attend, but is not required unless also working as a Developer.
• Scrum Master: May attend to help facilitate or coach, but is not required.
• Developers: Must participate because the event is specifically for them.

• Input feature distributions differ from training data ? Analyze dataset drift metrics

• Model accuracy drops without code changes ? Analyze dataset drift metrics

• Endpoint latency increases under load ? Investigate scaling and infrastructure metrics

• Leaf switches provide access ports for servers, endpoints, and other devices.
• Spine switches form the fabric’s backbone.
• Every leaf connects to every spine, creating a predictable, high-bandwidth, low-latency path.

• A: Adding both a spine and leaf is unnecessary for simply adding access ports.
• B: Adding a spine does not directly provide endpoint access ports.
• D: A single connection to one spine creates a bottleneck and a single point of failure.

1. Which host originated the infection

1. Which remaining hosts are infected

1. Determine which host was infected first—the originating host.
2. Decide whether each other host is clean or infected based on communication and event logs.

• Compare timestamps and find the earliest suspicious event.
• Look for the host that initiated the malicious connection, file transfer, exploit, or command—not merely a host that later received traffic.
• Follow the timeline through the firewall:

• A host is likely infected if it both receives suspicious activity and then initiates related malicious traffic.
• A host may be clean if the firewall blocked the connection and there is no evidence of execution or follow-on communication.

• The requirement explicitly says the organization wants to use SAML to secure Salesforce API access.
• The SAML Bearer Assertion Flow exchanges a SAML assertion for a Salesforce OAuth access token.
• It is intended for server-to-server or other noninteractive integrations where the application has already been authenticated by an identity provider.
• The connected app can be configured so administrators authorize or preauthorize applications that consume the APIs.

• B — JWT Bearer Flow: Uses a signed JWT, not a SAML assertion. It would be appropriate if the requirement specified JWT-based authentication.
• C — SAML Assertion Flow: This is not the standard Salesforce OAuth flow name; the relevant name is OAuth 2.0 SAML Bearer Assertion Flow.
• D — User-Agent Flow: Designed for interactive browser-based authorization, not a SAML-based server-to-server integration.

• Basic: Self-help only; no technical support or design assessment.
• Standard: Technical support, but not the full proactive architectural guidance required here.
• Professional Direct: Provides proactive guidance and architecture-related assistance.
• Premier: Also supports this, but is a more expensive, enterprise-level option.

• ADF: Automatic Document Feeder; a printer/scanner hardware component.
• USB: A short-range wired connection, not a protocol for accessing a remote shared folder.
• PCL: Printer Control Language; it describes how print jobs are formatted, not how files or printers are shared over a network.