Palo Alto Networks PCCSA Exam Prep
Palo Alto Networks Certified Cybersecurity Associate (Page 2 )

• Limiting the number of MAC addresses allowed on a switch port
• Restricting ports to specific known MAC addresses
• Taking an action—such as dropping frames or shutting down the port—when the limit is exceeded

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but is not the primary control for switch-port MAC limits.
• NGFW: Filters network traffic at the firewall, but does not directly control MAC addresses learned by a switch.

• Incident and problem management
• Change management
• Service-level management
• Configuration management
• Continual improvement

• Kanban: A workflow and task-visualization method; useful within service teams but not a complete service-management framework.
• Lean Six Sigma: Focuses on reducing waste and process variation; broader process-improvement methodology.
• ITSM: The overall discipline of managing IT services, not a specific framework or process model.

• Confirming the data has the required columns and data types
• Handling missing or duplicate records
• Converting data into a suitable format
• Selecting or engineering useful features
• Splitting it into training, validation, and test sets

1. Prepare the training data
2. Select an algorithm or configure AutoML
3. Train the model
4. Evaluate its performance
5. Tune hyperparameters if needed
6. Deploy the model

• Maintain head office control: Transfer pricing generally supports decentralisation rather than direct head-office control.
• Establish centralised decision making: This conflicts with divisional autonomy.
• Develop a top-down culture: Transfer pricing is intended to support empowered divisions and goal congruence, not impose purely top-down management.

• File is shared externally ? Access level

• File is labeled “Internal only” ? Sensitivity label

• Early units show relatively large time savings.
• Later units still take less time, but the reduction becomes progressively smaller.
• The curve therefore becomes flatter as production approaches 256 units.

• B: The reduction is not constant; learning normally diminishes over time.
• C: Time does not reduce at an increasing rate.
• D: A steady state may eventually be reached, but the question concerns the first 255 units while learning is still occurring.

1. Initiation

1. Planning

1. Execution

1. Monitoring and controlling

1. Closing

• Due diligence: Researching and evaluating a third party before entering or continuing a business relationship.
• Internal audit: Evaluates controls within the organization itself.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.
• Attestation: A formal statement or report—such as a SOC 2 report—provided by an independent party about an organization’s controls.

• delta.logRetentionDuration
• delta.deletedFileRetentionDuration

• delta.deletedFileRetentionDuration controls how long physically deleted or obsolete data files are retained before they become eligible for removal by VACUUM. Set it to interval 30 days.
• delta.logRetentionDuration controls how long Delta transaction-log history is retained. Set it to interval 30 days to support audits and time travel for that period.

sql 
ALTER TABLE Catalog1.Schema1.Table1 
SET TBLPROPERTIES ( 
  'delta.logRetentionDuration' = 'interval 30 days', 
  'delta.deletedFileRetentionDuration' = 'interval 30 days' 
);

• Prevention costs – costs incurred to stop defects occurring, such as staff training, quality planning and supplier evaluation.
• Appraisal costs – costs of checking whether products meet standards, such as inspection, testing and quality audits.
• Internal failure costs – costs of defects found before delivery to customers, such as scrap, rework and retesting.
• External failure costs – costs of defects found after delivery, such as warranty claims, returns, complaints and product recalls.

• netstat -tuln can show listening TCP ports.
• If the web service is not listening, or is bound only to 127.0.0.1, remote browsers cannot connect even though the server responds to ping.

• traceroute: Tests the path to the server, but ping already confirms basic reachability.
• tcpdump: Useful for detailed packet analysis, but it is more appropriate after checking whether a service is listening.
• arp: Helps troubleshoot local IP-to-MAC resolution, not an application-layer web connection.

• Undefined or blank values
• Relationship matching problems
• Duplicate or conflicting keys
• Errors when querying the model

• Normalize all values to upper- or lowercase in the source query or Power Query.
• Add an index or surrogate key when values that differ only by case must remain distinct.

1. Write a structured log entry to CloudWatch Logs containing:

1. Create a CloudWatch Logs metric filter that:

text 
ApiRequests 
Operation=GetOrders 
ResponseCode=500 
Version=2.4.0

• B is incorrect: CloudWatch Logs Insights queries analyze logs but do not directly publish metrics in this manner.
• C is incorrect: ALB access logs do not contain arbitrary Lambda response metadata as custom fields.
• D is incorrect: X-Ray traces and insights are not the appropriate mechanism for creating these custom, dimensioned application metrics.

• A user connects with their Google account.
• Google associates the user’s SSH key with that identity.
• IAM roles determine whether they can log in.
• Access can be tied to a specific employee for auditing.
• Removing the IAM role removes their login access.

• compute.osLogin: regular OS login access
• compute.osAdminLogin: OS login with administrative privileges, typically including sudo

text 
enable-oslogin=TRUE

• User2 is in Group1, so CA2 applies.
• CA2 targets Office 365.
• CA2 requires MFA OR an app protection policy.
• User2 has no app protection policy, but if User2 successfully completes MFA, the OR condition is satisfied.
• The device being noncompliant does not matter because CA2 does not require device compliance.
• CA1 applies only to Global Administrators. Unless User2 is also a Global Administrator, CA1 does not apply.

1. Initiate — establish the project, scope, team, and governance.
2. Plan — develop the detailed plan, schedule, resources, and implementation approach.
3. Execute — configure, integrate, migrate, test, and prepare the solution.
4. Deploy — move the solution into production and support go-live.
5. Close — complete handover, confirm outcomes, and formally close the project.

1. Horizontal scaling — Yes

1. Vertical scaling — Yes

1. Scaling can manage costs — Yes

• Horizontal = more or fewer instances
• Vertical = larger or smaller instances

• Future costs — Only costs occurring in the future can be affected by the investment decision. Past costs are sunk and irrelevant.
• Incremental costs — These are additional costs caused by choosing the investment. They are relevant because they differ between alternatives.
• Cash flows — Capital investment decisions are based on future cash inflows and outflows, usually discounted to present value.

• Committed costs have already been agreed or incurred and generally cannot be changed by the decision.
• Unavoidable costs will arise regardless of which option is selected, so they do not affect the choice.

• # Development
• # Testing
• # Production

• Separate endpoints: relate to compute or connectivity, not dashboard labels.
• Separate queries: retrieve or transform data but do not designate visual sections.
• Direct text written into the dashboard in editing mode: dashboards use text boxes, typically with Markdown formatting, rather than arbitrary text placed directly on the canvas.

• Share files with the wrong people
• Use public links unnecessarily
• Fail to classify sensitive data
• Upload data to unauthorized services
• Misunderstand company sharing policies

• A — Step-up authentication: Helps protect administrator accounts, but does not directly address improper file sharing by users.
• C — Password complexity: Helps reduce password attacks, not accidental data disclosure.
• D — Mobile device management: Secures managed mobile devices, but does not directly control file-sharing behavior across the organization.

• Who owns security risks and decisions
• Who is responsible for implementing controls
• Who reports security performance to management
• How security responsibilities align with business objectives

• B — Compliance with audit requirements: Governance may support compliance, but audit compliance is not its main objective.
• C — Monitoring security incidents: This is an operational security activity, not the central purpose of governance.
• D — Creation of tactical solutions: Governance establishes direction and oversight; tactical solutions belong to management and operational teams.

1. Start with the number of devices: 260 usable addresses.
2. Use the formula:

1. Test the host-bit values:

1. IPv4 has 32 total bits:

• /24: 254 usable — too small
• /23: 510 usable — sufficient
• /22: 1,022 usable — more waste
• /21: 2,046 usable — even more waste

• nmap - 10.11.1.130 — a network scanning command; mitigated with controls such as firewalls, monitoring, or access restrictions.
• “Click this link to get your free gift card.” — a phishing or social-engineering message; addressed through user awareness, email filtering, and authentication controls.
• “Your connection is not private.” — indicates a certificate or TLS validation problem; addressed by correcting the certificate or secure-connection configuration.

• Note the question number before leaving—for example, Question 38.
• Use the exam’s question navigator or Back/Previous button to return to that number.
• If you close or refresh the page, your position may not be saved, depending on the site. Reopen the page and select the question number again.
• Avoid using the browser’s Back button if it causes the exam page to reload; use the exam’s built-in navigation instead.

CIMA P3 topics

• IT governance and systems strategy
• Systems development and implementation
• Change and project governance
• Strategic and business risk

• A — Plan for new systems: The committee should help identify and prioritise systems requirements and ensure planned systems support organisational needs.
• D — Consider competitive issues: New information systems may affect Y’s competitive position, service quality and efficiency. These strategic implications should be considered.
• E — Ensure the system meets company goals: This is a key governance responsibility. The committee should ensure the project remains aligned with Y’s objectives and delivers business value.

• B — Develop new systems: Detailed system development should be performed by IT specialists and project teams, not the steering committee.
• C — Manage the project: The project manager should handle day-to-day project management. The steering committee should provide oversight, challenge and key decisions, rather than manage daily activities.

1. Version 1.0.0.0 — original published version
2. Version 2.0.0.0 — newly created and published version
3. Version 3.0.0.0 — new version created when version 1 is restored

• Act as the default gateway for devices in that VLAN
• Route traffic between different VLANs
• Provide management access to the switch

text 
interface vlan 10 
 ip address 192.168.10.1 255.255.255.0

• A is valid:

apex 
  for (Account theAccount : AccountList) { 
      // process theAccount 
  }

• D is conceptually valid, using an index:

apex 
  for (Integer i = 0; i < AccountList.size(); i++) { 
      Account theAccount = AccountList[i]; 
  }

• B is invalid because for(AccountList) is not valid loop syntax.
• C is invalid because each item is an Account, not a List.

• Lower order numbers appear first.
• For example, a variable with order 100 appears before one with order 200.
• The Sequence field is not the control used for catalog variable display order.
• The Default Value sets a value, not placement.
• The Choice field defines selectable options, not the variable’s position.

• A — Technical review by business owner: A business owner may approve the business impact, but a technical review is normally performed by technical personnel.
• C — Cost-benefit analysis after implementation: Cost-benefit analysis should occur before implementation to support the approval decision.
• D — Business continuity testing: This can be appropriate for major changes, but it is primarily part of business continuity and disaster recovery planning—not a universal change-management activity.

• Partners first log in to the corporate portal, which uses the shared SAML Identity Provider.
• When they select a Salesforce link, the IdP can send a SAML assertion directly to Salesforce.
• Salesforce validates the assertion and grants access to the Partner Community without requiring another login. This is IdP-initiated SSO because authentication begins outside Salesforce.

• SP-initiated SSO starts when Salesforce sends an authentication request to the IdP. That would be appropriate if users began by visiting Salesforce.
• The Web Server and User Agent OAuth flows are for OAuth authorization, not browser-based SAML federation between an IdP and Salesforce.

• Scale out during the hours when customer traffic is high.
• Scale in during low-demand periods, reducing instance-hours and cost.
• Use scaling policies based on metrics such as CPU utilization or request count.

• Multiple Availability Zones: Improves availability and fault tolerance, but does not automatically reduce cost.
• Placement group: Helps with specialized performance or low-latency requirements, not cost optimization.
• Private subnets: Improve network security, but do not automatically adjust capacity or reduce EC2 usage costs.

• Where to find the TiMOS runtime image
• Which configuration file to load
• The IP address and related settings for the CPM management Ethernet port

• A: User authorization is configured in the router’s security configuration, not primarily in the BOF.
• C: Hardware initialization is performed by the boot process and system software.
• D: The system date and time are configured separately, often through NTP or CLI settings.

• Honeypots: Decoy systems or services designed to attract attackers. Legitimate users should not access them, so activity there is a strong indicator of compromise.
• DNS sinkholes: Redirect malicious or suspicious DNS requests to a controlled destination. This can identify infected systems attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it is not an attacker-detection method.
• CI/CD: Automates software development, testing, and deployment.
• Threat modeling: Identifies potential threats and weaknesses before or during system design; it does not directly detect an active infiltrator.
• Data obfuscation: Makes information harder to understand, but does not identify attackers.

• Admin access to the deployment pipeline
• Contributor access to the Development and Test workspaces
• Viewer access to the Production workspace

• NAT traversal: Helps WAN Edge, vSmart, and vManage devices discover how to reach one another through NAT.
• Initial orchestration: Authenticates and introduces devices when they first join the SD-WAN fabric.
• Connection brokering: Provides information that allows devices to form their required control connections, after which the vBond is generally not in the data path.

• WAN Edge: Forwards user traffic and forms secure tunnels.
• vSmart: Controls the overlay control plane and distributes routes and policies.
• vManage: Provides centralized management, configuration, and monitoring.

• Use the grant-date fair value: $30
• Do not remeasure to the year-end value of $45
• Update the estimate of employees expected to vest

• Dr Share-based payment expense $450,000
• Cr Equity/share option reserve $450,000

• The listener uses a virtual IP address shared by the availability-group replicas.
• Floating IP, also called Direct Server Return (DSR), allows the SQL Server nodes to respond using the listener’s IP address rather than their individual VM IP addresses.
• This is required for the availability-group listener to function correctly with an Azure internal load balancer.

• The job keeps 31 days of regular restore points. A backup from the week of January 1 is older than 31 days by March 20, so it is no longer expected to remain on the performance tier.
• It is also a weekly GFS full backup, retained for 14 weeks. Therefore, it is still protected and has not been deleted.
• In a Scale-out Backup Repository, older backups can be moved from the performance tier to the capacity tier—typically object storage—according to the configured offload policy.
• The archive tier is not selected because the question’s configuration does not indicate that the backup has been archived there.

• Existing Eventhouse data: remains available only in the KQL database.
• Data ingested after enabling the feature: is copied to OneLake and can be accessed through OneLake file explorer.
• New databases: are irrelevant; the setting applies to the selected KQL database.

• SAML (Security Assertion Markup Language): Commonly used for enterprise SSO between an identity provider and cloud applications. It sends signed authentication assertions to the service provider.
• RADIUS: Primarily used for centralized authentication to network devices, VPNs, and wireless networks.
• EAP: An authentication framework commonly used with network access technologies; it is not typically the SSO protocol for SaaS applications.
• OpenID: Related to identity authentication, but traditional enterprise SSO questions involving cloud applications generally expect SAML. OpenID Connect is a newer authentication layer built on OAuth 2.0.

• A business-hours greeting
• An after-hours greeting
• A holiday greeting

• Weekday evenings/nights
• Saturdays and Sundays

1. Auto attendant 1

1. Auto attendant 2

1. Which host originated the infection
2. Whether each other host is clean or infected
3. Which firewall or host logs provide evidence of the infection’s movement

• Find the earliest infection-related event. The host associated with that event is the likely origin.
• Follow the timeline: outbound connections from that host may indicate propagation or command-and-control activity.
• A host receiving suspicious traffic is not automatically infected; look for evidence that it executed or initiated malicious activity.
• A firewall log can show traffic paths, but endpoint logs are usually needed to confirm infection.
• Mark a host clean only when the logs show no indicators of compromise or malicious activity.

• Amazon EC2 instances — ???????? ?? ?? ??????? CPU, memory ??? instance size ???????? ???????
• AWS Lambda functions — memory configuration ?????????? ???????
• Amazon EBS volumes — volume type ?? size optimize ???? ???????
• ??????? ECS workloads — resource configuration ? cost optimization-?? ???????

• Memory ? compute usage ?????????? ???? custom code ????? ???? development ? maintenance ??????
• Cost allocation tags ???? ????? ??? ?????? ???? ??????? ???; inefficient resource ??????? ?? recommendation ???? ???
• CloudTrail resource ???? ?? API activity ??????, resource utilization ????

• D — Value analysis: Correct. It examines an existing product to identify ways of reducing its cost while still providing the required functions, quality and reliability.
• E — Kaizen costing: Correct. It involves making continuous, small improvements and cost reductions while the product is already in production.

• Functional analysis: It is not limited to minimizing the cost of the originally defined functions. It examines what functions are required and how they can be provided at the lowest overall cost.
• Value engineering: Usually applies to the design and development of a new product, rather than being a fundamental redesign of existing organisational processes. That description is closer to business process re-engineering.
• Target costing: The target cost is generally established during the product development stage, before production begins. It is not continuously reset while the product is in production.

• Structure requirements documents
• Draft user stories and acceptance criteria
• Create templates for functional and nonfunctional requirements
• Turn natural-language descriptions into organized documentation or implementation examples

• A: “Automatically generating detailed requirements documents” overstates Copilot’s role; it assists but does not independently determine complete requirements.
• C: /help provides guidance about Copilot features, not reliable requirements-conflict detection.
• D: Stakeholder communication and meetings remain human responsibilities.

• Due diligence: Investigating and evaluating a third party before entering into or continuing a business relationship.
• Attestation: An independent party provides assurance about an organization’s claims or controls. A SOC 2 examination is an example of an attestation engagement, but the analyst requesting and reviewing the report is performing due diligence.
• Internal audit: Reviews the organization’s own internal controls.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.

• A. IDS attack signatures: Detects suspicious network activity, but is not primarily designed to scan uploaded files for malware.
• C. Load balancer: Distributes traffic among servers and improves availability; it does not inspect files for threats.
• D. WAF: Protects web applications from attacks such as SQL injection and command injection, but its primary role is not malware scanning of uploaded documents.

• 255.255.255.128 = /25: 128 total, 126 usable
• 255.255.255.192 = /26: 64 total, 62 usable
• 255.255.255.224 = /27: 32 total, 30 usable
• 255.255.255.240 = /28: 16 total, 14 usable

• One for the network address
• One for the broadcast address

• 8 total addresses
• 6 usable addresses
• Mask: 255.255.255.248