Generate a new Compliance Report.
Create compliance framework in a spreadsheet then import into Prisma Public Cloud.
From Compliance tab, clone a default framework and customize.
From Compliance tab > Compliance Standards, click "Add New."

Answer(s): D

Explanation:

https://docs.paloaltonetworks.com/prisma/prisma-cloud/prisma-cloud-admin/prisma-cloud- compliance/create-a-custom-compliance-standard

Show Answer Next Question

QUESTION: 12

Which three types of security checks can Prisma Public Cloud perform? (Choose three.)

compliance where
network where
user where
config where
event where

Answer(s): B,D,E

Show Answer Next Question

QUESTION: 13

Prisma Public Cloud enables compliance monitoring and reporting by mapping which configurations to compliance standards?

RQL queries
alert rules
notification templates
policies

Answer(s): D

Show Answer Next Question

QUESTION: 14

What configuration on AWS is required in order for VM-Series to forward traffic between its network interfaces?

Both Source and Destination Checks are disabled
Both Source and Destination Checks are enabled
Source Check is disabled and Destination Check is enabled
Source Check is enabled and Destination Check is disabled

Answer(s): A

Explanation:

https://docs.paloaltonetworks.com/vm-series/9-0/vm-series-deployment/set-up-the-vm-series- firewall-on-aws/use-case-secure-the-ec2-instances-in-the-aws-cloud

Show Answer Next Question

QUESTION: 15

In which two ways does Palo Alto Networks VM orchestration help service providers automatically provision security instances and policies? (Choose two.)

fully instrumented API
Aperture Orchestration Engine
VM Orchestration Policy Editor
support for Dynamic Address Groups

Answer(s): A,D

Show Answer Next Question

Download PDF Next Page

Viewing page 5 of 24
Viewing questions 21 - 25 out of 115 questions

Post your Comments and Discuss Palo Alto Networks PSE-Prisma Cloud exam prep with other Community members:

Comments:

Name:

PSE-Prisma Cloud Exam Discussions & Posts
PSE-Prisma Cloud AI Verifications

j_hernandez_it on: June 21, 2026
Three weeks of staring at brain dumps adn this exam was still very hard. Real exam questions pushed me to the edge.
South Africa

CramSession_Pro on: April 29, 2026
Real exam questions were scarce and the dumps saved me after two failed attempts. Challenging exam and the stress was real.
South Africa

sysadmin_bob on: May 24, 2026
Three weeks of prep and the real exam quetions still caught me off guard. The AI Assistant was helpful but the brain dumps were only partially useful for this challenging exam.
France

jason_helpdesk on: April 17, 2026
Three weeks of studying and teh real exam questions made it very hard. The exam dumps were the only thing that got me through.
France

cert_or_cry on: May 11, 2026
Spent weeks going over brain dumps and real exam questions for this very hard exam. Finally passed after a tough second try.
Ghana

AlmostGaveUp_J on: April 05, 2026
The exam dumps helped in the end after a very hard few weeks trying to prepare. This exam was challenging even with the real exam quetions I practiced.
Sweden

cl0udpr0 on: July 10, 2026
Just passed this exam after a lot of stress using braindumps and the AI Assistant. It was very hard but the real exam questions were spot on.
Sweden

SplunkSam on: April 28, 2026
Spent weeks trying to tackle this challenging exam and finally turned to exam dumps and the AI Assistant. Real exam questions were tougher than anticipated but managed to pass eventually.
Australia

certgrind_2025 on: June 26, 2026
Spent weeks trudging through brain dumps and the exam was still very hard. Only passed thanks to the real exam questions I found last minute.
Israel

amara_itpro on: May 20, 2026
The real exam questions were very hard and caught me off guard despite all the brain dumps I went through. Spent weeks studying and the AI Assistant wasn't much help in the end.
Kenya

dmitrilinuxpro on: May 15, 2026
Spent weeks on this exam and it felt very hard until I used the exam dumps as a last resort to understand the real exam questions.
Pakistan

OracleCert_V on: May 24, 2026
The AI Assistant adn braindumps gave me just enough to pass this challenging exam. For a while I thought I wouldn't make it through.
Hungary

lenaciscolab on: May 21, 2026
This exam was very hard and honestly the brain dumps were a lifesaver. Took two attempts but finally passed with the help of real exam questions.
Latvia

james_tech_uk on: April 14, 2026
Spent weeks on braindumps but the real exm questions were still very hard. The AI Assistant helped a bit but the exam was challenging.
Indonesia

nightstudyguy on: May 27, 2026
Passed it but this exam was very hard and some real exam questions caught me off guard despite using dumps all week.
United States

career_changer_c on: June 04, 2026
Took two attempts because the exam dumps barely covered the real exam questions which were very hard. The AI Assistant helped a bit but the exam was still a challenging experience.
Finland

NightOwlCerts on: May 12, 2026
Spent weeks trying to figure out the real exam quetions for this exam which were very hard. The exam dumps helped but the stress was still real.
Malaysia

WhyCertifyLol on: May 29, 2026
Underestimated this exam and realized I needed brain dumps to have any chance at passing. The AI Assistant and real exam quetions made all the difference in the end.
Ukraine

gita_dataeng on: March 31, 2026
This exam felt very hard but the exam dumps really helped me understand what to expect. Couldn't have cleared it without using those real exam questions.
Germany

YoutubeAndPray on: May 13, 2026
The exam was very hard and I only managed to pass it by using dumps. I wouldn't recommend skipping the braindumps if you want to save some time and stress.
Germany

ExamWarrior on: May 23, 2026
Underestimated how challenging this exam would be and had to rely heavily on braindumps. The real exam questions were tough but the dumps saved me in the end.
Belgium

firewall_fan on: May 03, 2026
Three weeks of brain dumps and the AI Assistant barely got me through this exam. Very hard but somehow managed to pass.
Jordan

hamidcertguy on: May 22, 2026
Just cleared this exam but the real exam questions were very hard adn caught me off guard. Luckily I found some braindumps which gave me some idea of what I was getting into.
South Korea

LinuxPlus_Len on: June 03, 2026
Passed it after weeks of stress and hours with brain dumps. Real exam questions were tough and the AI Assistant was helpful but the exam was still very hard.
Kenya

netgurusteve on: June 06, 2026
Finally done with this exam and it was very hard. teh brain dumps helped when the real exam questions got confusing.
Switzerland

NeverAgain_AWS on: June 12, 2026
Finished yesterday after three weeks of studying and the real exam questions caught me off guard even with the braindumps. Despite using the AI Assistant and brain dumps it was a very hard test.
South Africa

finn_k8s on: April 28, 2026
Finished yesterday with a passing score thanks to some brain dumps. The exam was very hard adn honestly I'm just glad it's over.
Turkey

zt_zealot on: May 05, 2026
Thought this exam was very hard but the AI Assistant and braindumps made it manageable. Still exhausted from it all.
Switzerland

p1ngpro on: May 28, 2026
This exam was very hard and the brain dumps were the only way I managed to pull through. Spent weeks with the AI Assistant but turned to the dumps at the end.
Canada

AnkiOrDie_2026 on: May 03, 2026
Didn't expect this exam to be very hard and ended up relying heavily on brain dumps and real exam questions to finally clear it.
United States

root_access_r on: June 20, 2026
Was not confident I would pass this exam and relied heavily on braindumps and the AI Assistant. The real exam questions were very hard but got through it.
Saudi Arabia

sec_ops_j on: June 29, 2026
Three weeks of late nights and stress behind me and this exam still felt very hard. The exam dumps saved me in the end but it took everything out of me.
Kenya

TestDayJitters on: July 02, 2026
Three weeks of prep felt like ages because this exam was very hard using braindumps was my only way through. Real exam questions were even more challenging than expected.
India

SecOpsGuy on: May 02, 2026
Took two attempts before passing this exam since it's a very hard one with real exam questions that were elusive. Ultimately had to rely on dumps because nothing else seemed to help.
United Kingdom

Khalil on: July 16, 2026
@Ahmed from Cairo, Yes, this exam is still vlaid. I just took this exam last week and these questions were there... some of them even word by word.
UAE

omaritpro on: June 13, 2026
Took two attempts to pass this exam using brain dumps after struggling hard to understand the materials. Real exam questions can be very hard without the extra help.
Turkey

jakob_vmware on: July 09, 2026
The braindumps were a last resort after nearly throwing in the towel on this exam. Real exam questions thankfully matched well enough to scrape through.
Canada

PassedOnThird on: May 20, 2026
Underestimated how tough this exam was adn really had to dig into those braindumps to get through it. The AI Assistant helped with some real exam questions but it was a grind.
Romania

4wscert on: July 09, 2026
Three weeks of prep with braindumps and the AI Assistant finally paid off despite doubting I’d make it through this challenging exam. Real exam questions matched well but it was still very hard.
Rwanda

4wscert on: May 11, 2026
Real exam questions were very hard and caught me off guard despite using dumps. Exam dumps helped but the AI Assistant didn't fully prepare me for the challenge.
Portugal

ITpro_Sarah on: May 02, 2026
Spent weeks poring over brain dumps and finally the real exam questions matched what I'd studied.
Qatar

chiara_devsec on: May 15, 2026
Spent weeks on brain dumps but the real exam questions caught me off guard. This exam was very hard and the AI Assistant helped but it was still stressful.
Vietnam

JustPassedBro on: June 13, 2026
Finally done with this exam after realizing the real exam questions were very hard. The brain dumps turned into a last-minute solution that helped.
United States

SkippedTheBook on: June 01, 2026
Spent weeks on this exam feeling it was very hard but the exam dumps helped me finally get through.
South Africa

FourthTimesFine on: May 22, 2026
Finally done with this exam after peeling through countless braindumps. No doubt it was very hard but the exam dumps definitely helped.
Colombia

ninasysadmin on: May 26, 2026
Spent weeks feeling stuck until I caved and used teh exam dumps to finally pass this exam. Very hard to understand it all even with the AI Assistant.
Ukraine

jhernandezit on: April 27, 2026
Spent weeks grinding through braindumps and relying on the AI Assistant just to tackle this very hard exam. Real exam questions were a lifesaver because I wasn't sure if I'd ever pass.
Lithuania

always_learning_a on: May 23, 2026
The exm dumps helped a lot but the real exam questions caught me off guard. Very hard and I needed two attempts to clear this exam.
Lebanon

certorcry on: June 03, 2026
teh AI Assistant and braindumps were the only reason I made it through this exam. Very hard and I wasn't sure I'd pass.
Kenya

certgrind_2025 on: April 17, 2026
Spent weeks reviewing materials but this exam was very hard till I found some dumps. Real exam questions from brain dumps helped eventually.
Italy

AI Explanation - verified by User8071 on: July 12, 2026
Question 127:
The correct answer is D.
Why D fits:

10 TB with maximum I/O: use EC2 instance store — it provides the highest local I/O throughput. It’s ephemeral, so not for durable data, but great as fast scratch storage for video processing.

300 TB durable storage: use Amazon S3 for long-term, highly durable storage (S3 Standard provides extremely high durability).

900 TB archival storage: use Amazon S3 Glacier for cost-effective long-term archival.

Why the other options aren’t suitable:

A: Uses EBS for the 10 TB high-I/O tier. While EBS can be fast, it’s typically more costly and doesn’t leverage the raw throughput of instance storage for bursty video processing, and doesn’t split the workload as cleanly as D.

B: Recommends EFS for the durable 300 TB. EFS is durable but not as cost-optimized as S3 for very large, long-tail archival or large-scale media workloads.

C: Uses EC2 instance store for max I/O (okay) but pairs it with non-Glacier archival storage, which isn’t ideal for long-term archival at scale.

Belgrade, Serbia

AI Explanation - verified by User8771 on: June 29, 2026
Question 13:

Correct answer: C: Use the Audit log section in the organization's GitHub settings.

Why: The audit log for GitHub Copilot Business is accessed from the organization's audit log. This section records activities related to Copilot usage and configuration, making it the appropriate source for review.

Why the other options are less accurate:

- A: Security tab in the organization's settings is related to security settings but not specifically the Copilot audit log location. - B: Insights tab in the repository settings is for repository analytics, not Copilot audit events. - D: Code tab in the repository is unrelated to audit logs.

Quick tip: In GitHub, navigate to your organization > Settings > Audit log to filter for Copilot-related events and review recent activities.

Reference: GitHub Copilot Business documentation on audit logs.

Hyderabad, India

AI Explanation - verified by User9130 on: July 07, 2026
why --from-literal tag and not from file
Short answer: --from-literal is just a convenient way to create a secret from a small, explicit key/value pair inline. from-file is for secrets stored in files.
Key points:

--from-literal=key=value: quick, explicit. You define the exact key name (key) and its value (value4) in the command.

--from-file: used when you have secret data in a file (e.g., password.txt, cert.pem). You either pass --from-file=path/to/file (which uses the file name as the secret key) or --from-file=keyname=path/to/file to set a specific key name.

For this question, key1=value4 is a tiny secret, so --from-literal is simplest and unambiguous.

Kubernetes encodes secret data in base64 automatically when stored.

Examples:

kubectl create secret generic another-secret --from-literal=key1=value4

If using a file: kubectl create secret generic another-secret --from-file=key1=path/to/value4.txt (or --from-file=path/to/value4.txt and rely on the file name as the key).

Munich, Germany

AI Explanation - verified by User6290 on: July 20, 2026
Question 16:
Here’s how to think about Question 16.

The question asks why some tasks appear locked in the HR Guided Setup Module’s Task view.

The options are:

- A) They require an elevated role to access - B) They are deprecated tasks - C) They require other tasks to be completed first - D) They require a plugin to be activated first
What’s most likely correct

C) They require other tasks to be completed first. In guided setup flows, tasks are usually gated by prerequisites to ensure proper sequencing and data/configuration dependencies. You typically unlock a task only after the necessary preceding tasks are finished.

Why the other options are less likely

A) Elevated roles can restrict access in some contexts, but guided setup tasks are commonly gated by prerequisites rather than solely by role.

B) Deprecation isn’t the general pattern for “locked” tasks in the guided setup.

D) A plugin activation could unlock certain features, but the common gating mechanism is task dependencies, not plugin state.

Note on the provided answer

The page shows the answer as D, but based on how HR Guided Setup usually works, the more accurate reason is typically C (prerequisites). If you’re studying, treat C as the conceptual answer and be aware the listed key may be incorrect. If you want, I can walk through each option in more detail.

Kolkata, India

AI Explanation - verified by User5811 on: June 29, 2026
Question 7:
Here’s how to reason through Question 7.

Requirements recap:

- Use custom domains - Each web app needs 10 GB of storage - Each app runs on dedicated compute instances - Load balancing between instances is included - Minimize cost

Tier options and key differences:

- Free/Shared: not suitable for production with dedicated compute and custom domains (they use shared compute and have limitations on custom domains). - Basic: provides dedicated compute and supports custom domains, but is limited in scale (fewer instances) and may have tighter storage/scale limits. - Standard: provides dedicated compute with more instances, built-in load balancing, supports custom domains, and greater storage options. More suitable for multi-app production scenarios and scalable workloads at a reasonable cost.

Why Standard (the given answer) fits:

- It guarantees dedicated compute and includes load balancing across multiple instances. - It supports hosting multiple apps under one plan with custom domains. - It offers more headroom (scale and storage) than Basic while typically costing less than Premium options, aligning with “cost minimized” given the need to host 10 apps.

Important caveats (for real-world sizing):

- Ensure the chosen plan tier and size provide enough total storage for all apps (not just per-app). You may need a larger Standard tier (or multiple plans) to meet the 10 GB per app requirement.
In short: Standard is the right balance of required features (custom domains, dedicated compute, load balancing) and cost for hosting multiple apps, per the exam key. If you want,
Borehamwood, United Kingdom

AI Explanation - verified by User5247 on: July 03, 2026
Prepare for the exam
I’m the Microsoft 365 Copilot and Agent Administration Fundamentals study assistant. I can help you prepare and walk through these questions.
Study plan (short, focused)

Key areas: Privileged access (PIM and time-bound activation), Entra ID concepts (CA, app registrations), auditing (Defender + Purview), identity security (Secure Score), phishing incident response, number matching MFA, and AI accountability.

Quick path: 1) Read the official docs on PIM deployment and time-bound activation. 2) Review Conditional Access basics and how CA enforces Zero Trust. 3) Understand how app registrations create service principals for third-party apps. 4) Learn where to view audits (Defender portal and Purview) and what they track. 5) Know what affects Identity Secure Score (global admins, password policies). 6) Understand number matching in Authenticator. 7) Review steps to investigate phishing in Defender.

Question highlights (concepts)

Q2: PIM provides time-bound role activation to enable Just-In-Time access.

Q3: To allow a third-party service to authenticate to Entra ID, create an App Registration (service principal).

Q4: Conditional Access policies provide the rules that control how users access cloud apps.

Q5: Accountability is the Microsoft principle that humans remain responsible for AI outcomes.

Q6: Number matching uses a code displayed on login and must be entered in the Microsoft Authenticator app.

Q7: Identity Secure Score is affected by the number of Global Administrators and whether passwords expire (never expire can improve score as a policy setting).

Q8: To review phishing incident impact, use the Defender portal (Incidents, Threat Explorer, etc.).

Q1: Auditing actions are tracked in Defender and Purview; “Search & Intelligence” in Admin
Sunderland, United Kingdom

AI Explanation - verified by User4271 on: July 10, 2026
Question 1:

Correct answer: A

Reasoning:

A Snowball Edge loan includes a free 10-day usage window for the appliance. That means simply using the device for up to 10 days incurs no additional charges.

The other items involve data transfers or extended usage beyond that initial period, which are billable:

- Transferring data out of S3 to the Snowball Edge (data movement) and - Transferring data from the Snowball Edge into S3 - Daily use of the appliance after the initial 10 days These would incur data-transfer or ongoing-device charges per AWS Snowball pricing.
Dakar, Senegal

AI Explanation - verified by sshuang68 on: June 28, 2026
Question 303:
Answer: A
Reasoning:

To enforce a password expiry/age policy for local (local database) accounts on a Cisco gateway, you can attach the Common Criteria policy to the local user. The command would look like:

username admin privilege 15 password 0 Cisco13579! common-criteria-policy

The common-criteria-policy applies a baseline password policy that includes expiry (60 days in your scenario) and other criteria defined by the Common Criteria-compatible policy.

The other options don’t configure local-password expiry:

- B (AAA server) handles authentication on the server side, not the local account expiry on the gateway itself. - C, D don’t address the local-password expiry requirement.
So, enabling a Common Criteria policy on the local user is the correct way to ensure local passwords expire after 60 days. The referenced Cisco doc discusses the common-criteria-password policy for this purpose.
Plano, United States

AI Explanation - verified by tjgalti on: July 05, 2026
Question 29:

Key concept: The LTM has an SSL Transactions Per Second (TPS) license limit. Any TLS transactions beyond that limit in a given second are dropped (silently).

Given:

- TLS TPS license limit: 500 - New TLS transactions attempted: 2560 per second

Calculation:

- Accepted: 500 - Discarded: 2560 - 500 = 2060

Correct option: “2060 new TLS transactions will be silently discarded due to the SSL TPS license limit.”

Note: The exam page lists the first option (560 discarded) as the answer, but that is incorrect based on the 500 TPS limit and 2560 attempts.

Thalwil, Switzerland

AI Explanation - verified by User5071 on: July 06, 2026
Question 10:
La respuesta correcta es A (Sí).

¿Qué se pregunta? Configurar un Azure Internal Load Balancer (ILB) como listener para un grupo de disponibilidad de SQL Server Always On en VMs de Azure.

¿Qué implica Floating IP? Es la característica que permite que la IP frontal del ILB “flote” entre las VMs del backend.

¿Por qué es necesario? Con un ILB, al hacer failover de la réplica primaria, necesitas que la IP del listener permanezca estable para los clientes. Si no habilitas Floating IP, la IP podría no redirigirse correctamente al nodo activo, interrumpiendo la conectividad del listener.

Resultado: al activar Floating IP se garantiza que el listener siga siendo alcanzable y que el tráfico se dirija a la réplica primaria actual, satisfaciendo el objetivo.

Notas: la documentación de Microsoft indica que para listeners de AG con ILB se requiere habilitar el Floating IP.
Cholula, Mexico

AI Explanation - verified by sshuang68 on: June 28, 2026
Question 286:
Question 286 recap:

Client: 209.165.201.25

Server: 209.165.200.225

Service: TCP port 80

ACL direction: inbound on the interface toward the web server (i.e., traffic entering the server)

Correct reasoning:

For inbound traffic toward the server, the ACL must permit traffic with the client as the source and the server as the destination, using TCP and destination port 80.

The proper entry is:

permit tcp host 209.165.201.25 host 209.165.200.225 eq 80
Why the other options are incorrect:

B is the correct choice (source 209.165.201.25, destination 209.165.200.225, dest port 80).

D would specify the reverse direction (server to client) or misapply the port, which is not what we want for inbound traffic to the server.

A uses lt 80 (destination port < 80) which is not appropriate for HTTP.

C also uses the reverse source/destination and would not allow client-to-server traffic.

Key takeaway: inbound ACL on the server-facing interface should permit tcp host 209.165.201.25 host 209.165.200.225 eq 80.
Plano, United States

AI Explanation - verified by ruben.batista on: July 15, 2026
Question 31:
The correct answer is C: Create separate Azure Event Grid topics and subscriptions for sign-in and sign-out events.
Why:

All authentication events must be processed by PolicyApp. By using two separate topics, you can route sign-in and sign-out events to the same app (via subscriptions pointing to PolicyApp), ensuring both types are processed.

Sign-outs must be processed as fast as possible. Isolating sign-out events on their own topic/subscription lets you scale and prioritize that path independently from sign-ins, reducing contention and latency.

Decoupling the flows provides better control and RBAC granularity. You can apply different access controls and scaling policies per topic/subscription if needed.

A single subscription with a subject filter (e.g., subjectBeginsWith) would still require handling both event types and wouldn’t offer the same isolation and independent scaling benefits as separate topics and subscriptions.

In short, separate topics and subscriptions give you independent routing, scaling, and prioritization for sign-in vs. sign-out events while guaranteeing PolicyApp handles all authentication events.
Valenza, Portugal

AI Explanation - verified by tjgalti on: July 05, 2026
Question 30:

Correct concept: Use a packet-filter to block traffic from the offending IP to the configuration utility, without impacting other users.

Why D (Packet Filter) is appropriate:

- Packet filters can block traffic based on source IP, destination port, and protocol. - You can drop only the admin/configuration access path (e.g., management port on the Self IP) for that one IP, leaving all other admin/users untouched.

Why not the others:

- SSH: Not targeted to the config utility specifically and would affect SSH access broadly. - IP allow list: Forcing an allow-list would restrict access to many legitimate admins and is not scalable for just one bad IP. - Port lockdown: Global port control, not IP-specific; could disrupt legitimate admin traffic. - Device trust: Not a mechanism for blocking by source IP.

Quick approach (conceptual):

- Identify the unwanted source IP. - Create a Packet Filter that matches src IP = bad IP (and the management port/protocol) and set action to drop. - Attach/apply it so only management traffic from that IP is blocked, preserving access for others.
Thalwil, Switzerland

AI Explanation - verified by User7903 on: June 28, 2026
Question 97:
The correct answer is B: netstat.

Why netstat first: Since users can ping the server (ICMP works) but a browser cannot reach HTTP, the issue is likely with the web service binding rather than basic network reachability. On the server, you want to verify that the web server is actually listening on the expected port (e.g., 80 for HTTP, 443 for HTTPS) and on the correct interface.

How to use it: run netstat -tulnp (or ss -tulnp) to view listening TCP/UDP ports and which process owns them. Look for lines like 0.0.0.0:80 or 127.0.0.1:80 to see if the web server is listening on all interfaces or only localhost. If nothing on port 80 is listening, fix the web server configuration or restart the service.

Why the other options are less suitable as first steps:

- traceroute checks network path from a host to another host, not the local service binding. - arp relates to local IP-to-MAC mapping and isn’t relevant once ping succeeds. - tcpdump can capture packets, but you’d use it after confirming the server is listening to diagnose traffic, not as the initial check.
Auckland, New Zealand

AI Explanation - verified by sshuang68 on: June 28, 2026
Question 355:
I can’t see the image in question 355, but here’s the idea and why A is the right choice.

Goal: Use an EEM applet to shut down a router interface when IP SLA indicates a problem, and bring it back up when the SLA recovers.

Why option A is correct:

- “event track 10 state down” triggers the EEM applet when the IP SLA track (track 10) goes down (i.e., SLA failure). - In the applet you would issue a CLI to shut the target interface. You’d typically also add a second trigger for state up to issue “no shutdown” when the SLA recovers.

Why the other options are less appropriate:

- “state unreachable” might be used for different tracking contexts; IP SLA failure is commonly represented as track going down, not “unreachable.” - “event sla 10 state …” is another style, but the standard approach shown in many examples is to use the track-based trigger.
Example pattern you’d implement:

event track 10 state down -> shutdown interface

event track 10 state up -> no shutdown

In short: question 355 tests using an EEM applet triggered by a IP SLA track’s down state to shut an interface, with a complementary up state to restore it.
Plano, United States

AI Explanation - verified by User4057 on: June 30, 2026
Question 4:
Answer: C
Why C is correct:

Autohealing is a feature of a Managed Instance Group (MIG). Only a MIG can automatically recreate instances that fail health checks.

By configuring an autohealing health check (HTTP), the group will recreate an instance after 3 consecutive failed checks (e.g., three 10-second checks fail), which matches the “3 attempts of 10 seconds each” requirement.

This approach uses the fewest steps: just create a regional MIG (for multi-zone) and enable an HTTP health check for autohealing. You don’t need to set up a separate HTTP load balancer or worry about autoscaling settings to achieve autohealing.

Why the other options are less suitable:

A requires creating an HTTP load balancer, which adds unnecessary components for autohealing alone.

B mentions balancing and RPS settings, which aren’t needed for autohealing.

D focuses on autoscaling, not on health-based recreation of unhealthy instances.

Abuja, Nigeria

AI Explanation - verified by User3312 on: July 17, 2026
Question 34:

Answer: C — 192.168.0.0/25 as summary and 192.168.0.0/27 for each floor

Why:

- Each floor needs 24, 29, 28, and 22 hosts. A /27 provides 30 usable addresses, which fits all floors without waste. - Four /27 subnets can fit inside a single /25: 192.168.0.0/27, 192.168.0.32/27, 192.168.0.64/27, 192.168.0.96/27. - Summarizing these four /27s yields 192.168.0.0/25 (covers 192.168.0.0–127), which is the most efficient common route that includes all floor subnets. - Other options waste addresses or don’t provide enough hosts (e.g., /28 per floor is too small for 24–29 hosts; /23 or /24 summaries would be coarser than needed).
If you want, I can walk through the exact per-floor subnet addresses and how they map within 192.168.0.0/25.
New Delhi, India

AI Explanation - verified by User8413 on: July 18, 2026
Question 1:
Question 1 asks about using cyber insurance to address items on the risk register. The correct answer is Transfer (Option B).
Why:

Risk transfer means shifting the financial impact of a threat from the organization to another party (the insurer). Buying cyber insurance accomplishes this shift.

It is not Accept: acceptance of risk would be tolerating it without action.

It is not Mitigate: mitigation involves reducing likelihood or impact with controls, not shifting costs.

It is not Avoid: avoidance would be not engaging in the activity that creates the risk; insurance does not remove the risk itself.

Short example: if a data breach occurs, the insurer would cover the costs, not the organization.
Key concept: risk transfer is one of the main risk response strategies, alongside acceptance, mitigation, and avoidance.
Cairo, Egypt

AI Explanation - verified by sshuang68 on: June 28, 2026
Question 344:
Here’s how to understand Question 344.

What the task asks: Create an Cisco IOS EEM applet that sends a syslog message when there’s a change caused by an OSPF problem.

How EEM works (at a high level):

- You define an applet with a name using event manager applet <name>. - You specify a trigger with an event line (e.g., a certain syslog pattern or routing event). - You specify actions to take when the event fires. To generate a syslog message, you use a syslog action.

The key point for this question: to actually send a syslog message, you use the action

- action 1 syslog msg "<your text>"
For example: action 1 syslog msg "OSPF ROUTING ERROR"

Why the other choices are not correct:

- The option that starts with event manager applet LogMessage defines the applet name, not the particular syslog action. It’s part of the setup, not the action that sends the log. - The other variants like syslog send, syslog pattern, or syslog write don’t match the proper EEM action syntax for sending a syslog message.
Bottom line: The correct action to generate the syslog message is the one that uses action 1 syslog msg "OSPF ROUTING ERROR".
Plano, United States

AI Explanation - verified by yibonline on: July 14, 2026
Which guiding principle is PRIMARILY concerned with end-to-end service delivery? Focus on value Think and work holistically Optimize and automate Collaborate and promote visibility
Answer: Think and work holistically
Reason: This guiding principle focuses on the end-to-end service delivery by ensuring the entire system and all components work together, rather than optimizing parts in isolation. Other principles (e.g., Focus on value, Optimize and automate, Collaborate and promote visibility) address different aspects like value, efficiency, or collaboration, but the holistic thinking is specifically about the whole service value system.
London, United Kingdom

AI Explanation - verified by User8116 on: July 18, 2026
Question 1:
Question 1 asks you to allocate devices to outlets so the customer has the most time to save cloud work and shut down gracefully during a power outage.
Key concepts:

UPS (uninterruptible power supply) provides battery backup (time to save work and shut down).

Surge protector only blocks surges; it does not provide backup power.

To maximize uptime for essential tasks, put the devices that must stay powered during an outage on the UPS. Put less-critical devices on the surge protector or a wall outlet.

Recommended approach (typical for a SOHO):

Put on the UPS: the desktop computer, monitor, network gear (router/modem), and any external drives or essential peripherals you need to keep running to save to the cloud.

Put on the surge protector (or wall outlet): nonessential devices like printers, scanners, speakers, or lamps.

Why: this gives you the longest window to save work to cloud and perform a graceful shutdown, while protecting mission-critical equipment from power surges. If the simulation requires specific device placements, apply the same principle: critical computing and network gear on the UPS, others on the surge protector.
Hackney, United Kingdom

AI Explanation - verified by User9237 on: July 07, 2026
Question 1:
Question 1 asks: which Azure support plans allow you to open new support requests?
Key concept:

A plan must be a paid plan to open technical support incidents. The Basic (free) plan does not include technical support requests.

What this means:

Paid plans (e.g., Developer, Standard, Professional Direct, Premier) allow you to open new support requests.

Basic plan provides only billing/subscription support and no technical support incidents.

If your goal is to be able to open new support requests for technical issues, you need to move from Basic to at least one of the paid plans (Developer or higher). The exact plan you choose depends on desired response times and support scope.
Would you like me to map this to the exact option letters you have in your question options? If you share them, I’ll annotate which ones enable new support requests.
Kochi, India

AI Explanation - verified by User3467 on: July 01, 2026
whats a drop ceiling
A drop ceiling (also called a suspended ceiling) is a secondary ceiling that hangs below the building’s actual structural ceiling. It uses a metal grid and lightweight tiles or panels that sit in the grid.

Purpose: hides wiring, ductwork, and pipes; improves acoustics; makes it easy to access things for maintenance.

Typical look: a grid of small square or rectangular tiles (common sizes are 2x2 ft or 2x4 ft).

Relation to cabling: the space above the tiles is often used as a plenum (shared air space). If you run cables there, they usually need plenum-rated jackets (CMP) for fire/smoke safety.

So, a drop ceiling is the visible grid of panels below the real ceiling, with an air space above it used for ventilation.
Quincy, United States

AI Explanation - verified by User1833 on: July 04, 2026
Question 12:
I can’t view the image, but here’s the conceptual reasoning behind question 12 and why answer B is correct.

In FortiGate SD-WAN, there are two main zones: Underlay (the physical transport links) and Overlay (the logical paths/tunnels). The Underlay zone is where you place the physical WAN interfaces that provide connectivity.

If the exhibit shows the Underlay zone with no members, that means no physical interfaces have been assigned to Underlay yet. This matches the statement: “The Underlay zone contains no member.”

Why the other options are less accurate:

A: The Underlay zone being “the zone by default” is not a fixed rule; the presence of members depends on configuration, so you can have an Underlay with members or empty.

C: If Underlay is empty, port2 and port3 would either be unassigned or placed into a different context; this statement isn’t reliably inferred from the exhibit.

D: The virtual-wan-link and overlay zones are fundamental parts of SD-WAN and typically cannot be deleted; this option is generally false.

Key concept: Underlay holds physical WAN interfaces; Overlay contains the logical paths and VPNs. If Underlay has no members, that’s exactly what option B describes.
Parabiago, Italy

AI Explanation - verified by sshuang68 on: June 28, 2026
Question 324:
Question 324: At which layer does Cisco DNA Center support REST controls?
Answer: B) northbound APIs
Why:

RESTful access to DNA Center is provided through its northbound APIs. These are the external interfaces apps or controllers use to interact with DNA Center for automation, policy, and analytics.

The session layer is an OSI concept about maintaining a communication session, not about REST controls.

EEM applets or scripts are device-level automation on Cisco IOS, not how DNA Center exposes REST controls.

YAML is just a data format for payloads; it’s not a distinct layer for REST controls.

Key idea: REST in DNA Center operates via its application-layer northbound APIs, which external systems call to manage and automate the network.
Plano, United States

AI Explanation - verified by User8435 on: July 15, 2026
Question 1:
Question 1 asks which class to use to configure the connection to the Azure Speech service when building a Python app.

Correct answer: SpeechConfig (D)

Why:

SpeechConfig holds authentication and endpoint details (e.g., subscription key and region).

It’s the object you pass to real-time processing classes like SpeechRecognizer (speech-to-text) or SpeechSynthesizer (text-to-speech) to connect to the service.

Notes on other options:

AudioConfig is for audio input (microphone/file) configuration.

AudioOutputConfig is for audio output configuration.

SpeechSynthesizer is a processing class, not a configuration holder.

Example:
import azure.cognitiveservices.speech as speechsdk speech_config = speechsdk.SpeechConfig(subscription="YOUR_KEY", region="YOUR_REGION")
use speech_config with recognizer or synthesizer

In short, use SpeechConfig to establish the connection; pass it into the speech processing components.
Bareilly, India

AI Explanation - verified by User9325 on: July 11, 2026
Question 45:
Question 45 asks which analysis method uses stratified sampling without replacement.

Correct answer: A. Latin Hypercube

Why:

Latin Hypercube Sampling (LHS) is a stratified sampling method. It divides the range of each input variable into equal-probability intervals and draws one sample from each interval. This ensures that the entire input space is covered (stratified) and each interval is represented exactly once (without replacement), which reduces sampling variance.

How it differs from other options:

- Monte Carlo simulation uses random sampling with replacement, often many times, without the strict interval coverage of LHS. - Impact analysis and Linear regression analysis are analytical methods, not sampling methods, and do not describe stratified sampling schemes.
So, LHS is the sampling technique described by “stratified sampling without replacement.”
Burlington, Canada

AI Explanation - verified by User7356 on: July 04, 2026
Question 20:
Question 20 asks about the Server certificate SNI check when the SNI hostname doesn’t match the certificate’s CN or SAN.

Answer: C. FortiGate will close the connection if the SNI does not match the CN or SAN fields.

Why:

SNI (Server Name Indication) tells the server which hostname the client wants. The server certificate should cover that hostname, either in the CN or in the SAN (Subject Alternative Name) field.

If the SNI does not appear in either CN or SAN, the certificate identity check fails. In strict/SNI-check mode, FortiGate will terminate the TLS handshake to prevent a potential man-in-the-middle.

Why not D: matching both CN and SAN is not usually required; if the SNI matches either CN or SAN, the check passes. “Does not match CN and SAN” would be overly strict.

Why not A or B: A suggests using CN for URL filtering when SNI doesn’t match, which isn’t standard behavior. B suggests a warning while accepting the connection, which is not the default strict behavior in this context.

Note: I can’t see the exhibit image, but the general rule is: if SNI isn’t found in CN or SAN, FortiGate blocks the connection (C). If you want, I can walk through the concept of SNI checks or compare how different SSL inspection profiles affect this behavior.
Parabiago, Italy

AI Explanation - verified by ayeezakhan55 on: July 14, 2026
Question 3:
Question 3 me pucha gaya hai ke VM1 ko Azure me replicate karne ke liye kaun se objects create karne honge.

Is goal ke liye aksar Azure Site Recovery (ASR) use hota hai.

Sab se pehle jo object create kiya jata hai: Recovery Services vault. Ye vault ASR ki sari settings aur replication ko manage karta hai.

Is vault ke andar aap create karte hain: Replication policy (jo RPO etc. define karta hai) aur Protection group (jisme multiple VMs ko ek saath replicate kiya jata hai).

On-prem Hyper-V server ko ASR provider ke zariye vault me register karna hota hai, phir VM1 ko select karke replication ke liye add kiya jata hai.

Akhir kar, saral alfaaz me: sab se zaroori object hai Recovery Services vault; uske andar replication policy aur protection group banakar VM1 ko Azure me replicate kiya jata hai. Agar chaho to main ASR setup step-by-step roman Urdu me aur detail me explain kar sakta hoon.
Lahore, Pakistan

AI Explanation - verified by User3311 on: July 21, 2026
Question 23:

Answer: C (192.168.0.1-192.168.0.99, 192.168.0.101-192.168.0.254)

Why: The interface is 192.168.0.100/24, so DHCP pools must be within the 192.168.0.0/24 subnet and cannot include the router’s IP (192.168.0.100), the network address (192.168.0.0), or the broadcast (192.168.0.255). Option C provides two ranges that exclude those addresses.

Why the other options are invalid:

- A: 192.168.0.1-192.168.0.255 includes the router’s IP (100) and the broadcast (255). - B: 192.169.0.1-192.169.0.254 is not in the 192.168.0.0/24 subnet. - D: 192.168.0.1-192.168.0.14 is a valid pool but very small and does not reflect the two-range approach shown in C; the given key selects the two ranges in C.
Ipatinga, Brazil

AI Explanation - verified by User8745 on: July 19, 2026
Si la pregunta fuera: Which device is part of the fabric overlay?
Respuesta: el AP (punto de acceso).

En Cisco SD-Access, el fabric overlay se extiende hasta lo inalámbrico; los APs son nodos de borde del fabric y su tráfico queda dentro del overlay.

El cliente inalámbrico genera tráfico que viaja por el overlay, pero no es un componente del fabric en sí.

El WLC es principalmente una herramienta de gestión y control, no forma parte del overlay; el underlay es el transporte físico.

Lima, Peru

AI Explanation - verified by monika.nidhi42 on: July 21, 2026
Question 218:
Question 218 explains how to calculate the ALE (Annualized Loss Expectancy).

Key concept: ALE = SLE × ARO

- SLE (Single Loss Expectancy) is the financial impact of a single incident. - ARO (Annualized Rate of Occurrence) is how often, per year, the incident is expected to occur.
Given:

SLE = $15,000

Occurrences: 2 in 3 years ? ARO = 2/3 per year ˜ 0.6667

Compute:

ALE = $15,000 × 0.6667 ˜ $10,000 per year

Answer: $10,000 (Option B)
Notes:

ALE is the expected annual loss, so it averages the losses over each year.

This helps prioritize risk treatments by comparing ALE to the cost of controls.

Basingstoke, United Kingdom

AI Explanation - verified by User3022 on: July 09, 2026
Question 22:
Answer: The user's profile record (option B).
Why:

Login hours are defined on a profile. The profile controls when users with that profile can log in.

The user record itself doesn’t store login hours, so it cannot enforce hours.

Network settings (IP ranges) restrict by where you can log in, not when.

The role hierarchy does not affect login times; it controls data access, not login windows.

So, to prevent logins outside business hours, you’d edit the relevant profile’s Login Hours (e.g., Setup > Profiles > [Profile] > Login Hours) or assign users to profiles with the appropriate hours.
Kolkata, India

AI Explanation - verified by User9994 on: July 14, 2026
Question 2:

RPO and RTO definitions:

- RPO (Recovery Point Objective): you can tolerate losing up to 2 hours of data. - RTO (Recovery Time Objective): you must restore service within 10 minutes.

Why B and D meet these goals:

- B. Amazon Aurora Global Database in two Regions: provides cross-region replication with very small lag. The 2-hour RPO is easily met because data is replicated across regions quickly. In a disaster, you can promote the secondary region to master, achieving a short RTO. - D. Two-region deployment with Route 53 failover and Auto Scaling Groups: ensures the app tier can switch to a healthy region quickly. Route 53 health checks direct traffic to the healthy region, and pre-provisioned ASGs maintain capacity, meeting the 10-minute RTO.

How they complement each other:

- Data layer (B) handles RPO, ensuring recent data is available in the failover region. - Compute layer (D) handles RTO, ensuring application endpoints are routed to a ready, scaled region quickly.

Quick tips:

- Use a low Route 53 TTL for fast DNS failover. - Regularly test cross-region failover and promotion processes.
Johannesburg, South Africa

AI Explanation - verified by User7665 on: July 05, 2026
Question 1:
Here’s a concise explanation of Question 1 and why the approach in the provided answer (A) is correct.

Objective

- Each connected device must reach only its correct network, which means mapping each switch port to the appropriate VLAN. - Disable all unused switch ports to reduce attack surface. - Provide fault-tolerant inter-switch connectivity so network paths remain available if one link fails.

Why the approach (A) is correct

- Assigning each port to the proper VLAN ensures devices are on their intended networks. - Disabling unused ports prevents unauthorized access. - Using redundant inter-switch links (and enabling LACP if available) provides fault tolerance and more bandwidth between Switch 1 and Switch 3.

What to configure (practical steps)

- On Switch 1: for ports 1–7, set the port to access the VLAN that matches the connected device type (servers, printers, PCs, etc.). Do not enable extra VLANs on those ports. - On Switch 3: for ports 2–8, do the same VLAN assignment based on the devices connected there (e.g., WLAN access, user devices, printers). - Inter-switch link(s): configure as a trunk carrying the required VLANs; enable LACP if you have multiple links to ensure redundancy and aggregated bandwidth. - Duplex/speed: set to Auto to avoid duplex mismatches. - Disable any port not in use. - After changes: verify with commands like show vlan brief, show interface trunk, and test connectivity (pings across VLANs as applicable).

Quick verification

- Confirm VLAN membership on each port a
Cape Town, South Africa

AI Explanation - verified by teodor482 on: June 29, 2026
Question 10:
Question 10 asks if using an “elastic expenditure model” meets the goal of migrating VMs to an Azure pay-as-you-go subscription and using the correct expenditure model.

The Azure pay-as-you-go model is an example of operational expenditure (OpEx): you pay for actual usage with no large upfront capital investment.

The term elastic expenditure model is not a standard Azure expenditure model. Elasticity describes scaling resources, not how costs are categorized or billed.

Therefore, the proposed solution does not meet the goal. The correct expenditure model for this scenario is operational expenditure (OpEx), i.e., pay-as-you-go.
Athens, Greece

AI Explanation - verified by User7144 on: July 12, 2026
MITRE ATT&CK mean
MITRE ATT&CK is a public knowledge base of attacker behaviors used in cyberattacks. It stands for Adversarial Tactics, Techniques, and Common Knowledge.

What it is: a library of real-world tactics and techniques adversaries use, organized by goals (tactics) and methods (techniques, with sub-techniques).

How it’s structured: matrices for different domains (e.g., Enterprise, Mobile, ICS). Each technique has descriptions, examples, detections, and mitigations.

How it’s used: threat modeling, security control mapping, detection engineering, red/blue team exercises, and gap analysis. It helps you map existing detections to specific attacker techniques.

Quick examples:

- Initial Access: Phishing - Credential Access: Credential Dumping - Privilege Escalation: Exploit Public-Facing Application

Key point: ATT&CK is a living, evolving resource—not a standard or scoring system, but a guide to understand and defend against real attacker behavior.

If you want, I can explain how to map a specific defense or detection to ATT&CK techniques.
Grand Forks, United States

AI Explanation - verified by User6689 on: June 29, 2026
Question 26:

Short answer: No. Azure Information Protection is not the right fit to protect admin credentials during deployment.

Why: Azure Information Protection (AIP) protects data (documents, emails) by classification and rights management. It isn’t a secret management or credential vault for deployment pipelines. To securely handle credentials in automation, you need a secrets store and controlled access, not just encryption of data at rest/in transit.

Better approach: Use a secrets management solution such as Azure Key Vault.

- Store admin credentials (or, preferably, deploy-time credentials) as secrets or certificates in Key Vault. - Use a service principal or Managed Identity for your deployment automation to access Key Vault with least privilege (Get secrets). - Reference Key Vault secrets from your deployment templates or scripts (ARM templates, Terraform, or CI/CD pipelines) without exposing plaintext credentials.

Summary: AIP does not provide the proper secret management for automated deployments. The correct solution is to store and access credentials securely via Azure Key Vault (with proper access controls).

San José, Costa Rica

AI Explanation - verified by User5177 on: July 11, 2026
Question 1:
Question 1 asks which components should be part of a deployment solution that keeps Windows Server 2016 VMs uniform and minimizes administrative effort.

Correct choices: A. Azure Resource Manager templates and B. The PowerShell Desired State Configuration (DSC) extension for Windows.

Why:

- Azure Resource Manager templates provide Infrastructure as Code to declaratively deploy and configure resources (VMs, networks, etc.) in a consistent, repeatable way across many VMs. - DSC extension enforces a declared configuration on each VM and can remediate drift, ensuring all VMs stay in the desired state with minimal admin intervention.

Why not C (The Custom Script Extension): It can run scripts but doesn’t inherently enforce a uniform, ongoing desired state or drift remediation across multiple VMs, so it’s less suited for maintaining consistency with minimal admin effort.

In short: use ARM templates to provision and DSC to enforce configuration across the fleet.
Nairobi, Kenya

AI Explanation - verified by User7866 on: July 20, 2026
Question 51:

Correct answer: A — The degradation of a service.

Why: A service request is a formal request from a user for something that is pre-approved and routine (e.g., provisioning a laptop, replacing a toner cartridge). Those are typical service request actions. The degradation of a service, however, is an incident: it describes a problem affecting service quality or availability and is handled by Incident Management (and possibly Problem Management), not as a standard service request.

Quick note on the other options:

- B (replacement of a toner cartridge) and C (provision of a laptop) are classic service requests. - D (a complaint about a support team) is not a service request either; it would be handled through complaint/feedback channels, not as a service request.
Kuching, Malaysia

AI Explanation - verified by N0T123496giraffe on: July 14, 2026
Question 322:

The page you shared does not list domain names for individual questions, so I can’t confirm the exact domain from the question text alone.

My best guess: this question relates to change management and configuration control, which typically maps to Governance, Risk, and Compliance (GRC) in Security+ mappings. It also touches on Operations concepts, but the governance aspect fits best.

If you want, I can walk through why this mapping makes sense or help map other questions you’re curious about.
Mableton, United States

AI Explanation - verified by User7778 on: July 07, 2026
Question 12:
Question 12 asks which tool lets a developer send requests to Salesforce REST APIs and view the responses.

Correct answer: Workbench (B)

Why: Workbench is a standalone web-based tool designed for interacting with Salesforce APIs (REST, SOAP, Bulk). You can specify REST endpoints, set HTTP methods, headers, and bodies, and then view the status, response body, and headers.

Note: The Salesforce Developer Console also offers a REST Explorer tab, which can perform REST calls, but the exam’s chosen answer key points to Workbench as the primary tool for this task.

Pune, India

AI Explanation - verified by sshuang68 on: June 28, 2026
Question 338:
Question 338 asks about the Cisco DNA Center Intent API. The two correct characteristics are:

northbound API

business outcome oriented

Rationale:

The Intent API is exposed to higher-level applications (northbound) to drive business outcomes, not device-level details.

It is not device-oriented, not southbound, and it is intent-based (not procedural).

Plano, United States

AI Explanation - verified by User9325 on: July 11, 2026
Question 41:
Question 41 asks which inputs are used to identify project stakeholders in the Identify Stakeholders process.
What the PMI objectives specify as inputs:

Project Charter

Business documents (e.g., business case, benefits management plan)

Enterprise Environmental Factors (EEF)

Organizational Process Assets (OPA)

Why the provided options are off:

A: includes management reserve (not an input to identify stakeholders).

B: includes project management plan and human resource plan (not inputs to this process).

C: lists bid documents instead of business documents (procurement documents, not stakeholder-identification inputs).

D: lists communications management plan (not an input here).

Conclusion:

The correct inputs are: Project Charter, Business Documents, EEF, and OPA.

The answer key showing C is likely incorrect because it swaps “Business Documents” with “Bid Documents.” If you must choose from the given options, none match perfectly; C is the closest but still not accurate.

Burlington, Canada

AI Explanation - verified by sshuang68 on: June 28, 2026
Question 290:

Correct answer: C — target 192.168.100.82 in the URI.

Why: The show-control-connections output indicates the client (Postman) is not correctly reaching the vManage, i.e., the REST API calls are going to the wrong device. If Postman is pointing to a non-vManage IP, authentication will fail even if credentials are correct. By updating the URI to use the vManage IP (192.168.100.82), the request reaches the correct controller and authentication can proceed.

Why the other options are less suitable:

- Use basic authentication: This doesn’t fix the endpoint mismatch; authentication method isn’t the root cause here. - Change the port to 12446: There’s no evidence the port is the issue; the endpoint is the problem. - Restart the vSmart host: The issue shown points to vManage reachability, not vSmart; rebooting won’t fix the endpoint being contacted.

Concept note: In Cisco SD-WAN, REST API authentication must target the correct vManage controller. If you’re seeing a control connection issue, verify the API base URL/host first before changing auth methods or ports. If you want, I can walk through how to verify the target in Postman.

Plano, United States

AI Explanation - verified by User9954 on: June 28, 2026
Question 62:
The correct answer is D — RAID 6.
Reason: RAID 6 uses dual parity, so the array can tolerate up to two drives failing simultaneously without data loss. This provides higher fault tolerance than RAID 5, which can survive only a single drive failure. For comparison: RAID 0 has no redundancy, and RAID 1 tolerates one failed drive per mirrored pair, not multiple simultaneous failures across the array.
Paris, France

AI Explanation - verified by User2940 on: July 20, 2026
A? ??? ?? ??
A? ??? ?? ??? ?? ??? ?? ?????.

A? ??? Aurora Replicas? ?? ??? ???? ?? ???, ?? ???? Network Load Balancer(NLB)? ??????. NLB? ?? 4 ?? ???? HTTP ??? ?? ???(Sticky sessions)? ????? ???? ????.

??? ?? ??????? ?? ?? ???? ??? ???? ?? ????? ????? ?? ?? ???(?? ?/??? ??)? ?????. ? ??? ALB?? ?? ????, NLB?? ???? ?????.

??? ??? ??? ??? ???? ?? ???? ???? HTTP ???? ??? ALB? ???? ???. A? ? ??? ??????.

??: ?????? ?? ??? ????, ?? ???? ???? ?? ??? ??? ???? ??? ????? ???? ????.
Seongnam-Si, South Korea

AI Explanation - verified by User4762 on: July 06, 2026
mi spieghi meglio Apri in modo da selezionare Transform e filtra per il percorso della cartella (Folder Path) che contiene i report di produzione., io seleziono la diretory vedo una tabella con tutti i nomi del file e poi
Ottimo punto. Ecco cosa fare dopo aver visto la tabella con i nomi dei file.

Dopo aver selezionato Transform, guarda la colonna Folder Path e filtra per il percorso della libreria manufacturing (e, se vuoi, filtra anche Name per estensione .xlsx per includere solo file Excel).

Una volta filtrati i file, clicca su Combine (o sull’icona Content/Binary e scegli Combine & Transform). Power Query userà un file di esempio per capire la struttura degli Excel e ti chiederà quale foglio utilizzare e se la prima riga è intestazione.

Conferma. Power Query creerà una singola tabella combinando i dati da tutti i report Excel e potrai poi fare Load / Close & Load per portarli nel modello.

Se vuoi solo vedere i file disponibili, non eseguire la parte di combinazione e chiudi con Load per avere la lista; se vuoi analizzare, usa la combinazione.
Genoa, Italy

AI Explanation - verified by User7070 on: July 17, 2026
Question 5:
Question 5 asks if the proposed solution (PaaS) is appropriate for deploying Azure virtual machines.

Correct answer: No (B).

Why:

To deploy and manage Azure VMs, you use Infrastructure as a Service (IaaS). IaaS provides the actual virtual machines you configure, patch, and control.

Platform as a Service (PaaS) abstracts infrastructure and OS management and is used for hosting applications (e.g., web apps) on managed runtimes, not for provisioning and managing individual VMs.

So the goal (deploying VMs) is not met by using PaaS; you should use IaaS instead.
Delhi, India

AI Explanation - verified by User6887 on: July 21, 2026
Question 31:
The two correct choices are A and B.

Quick context: In a three-tier network (Access, Distribution, Core), roles are:

- Access: connects end devices. - Distribution: aggregates and enforces policies, can route between VLANs. - Core: high-speed backbone with redundancy to keep the network up.

Why A is correct: The Distribution layer runs Layer 2 and Layer 3 technologies. It often handles VLAN access (L2) and can perform inter-VLAN routing or connect to the core (L3). So it makes sense for the distribution layer to support both L2 and L3.

Why B is correct: The Core layer is designed to maintain continuous connectivity when devices fail. It is built for high availability and redundancy, providing multiple paths so the network remains reachable even if some components fail.

Why the others are not correct:

- C: The Access layer is not primarily for routing between domains; inter-VLAN routing is typically done in the Distribution (or Core) layer. - D: The Core layer does not maintain wired connections for each host; that’s the role of the Access layer. - E: The Core and Distribution layers do not perform the same functions; they have distinct roles.
Thiruvananthapuram, India

What the PSE-Prisma Cloud Exam Tests and How to Pass It

The Palo Alto Networks System Engineer Professional - Prisma Cloud certification is designed for technical professionals who specialize in cloud security architecture and operations. This certification validates a candidate's ability to deploy, configure, and manage the Prisma Cloud platform to secure multi-cloud environments against sophisticated threats. Organizations that utilize Palo Alto Networks technology often require their systems engineers and security architects to hold this credential to ensure they possess the necessary expertise to protect cloud-native applications and infrastructure. By passing this exam, professionals demonstrate they can effectively implement security policies, manage compliance, and utilize the full suite of Prisma Cloud capabilities to maintain a robust security posture. This Palo Alto Networks certification serves as a benchmark for technical proficiency in securing complex, distributed cloud environments.

The PSE-Prisma Cloud exam covers a broad spectrum of technical domains essential for cloud security professionals. Candidates must demonstrate a deep understanding of cloud-native security concepts, including visibility, compliance, and governance across public and private cloud infrastructures. The exam evaluates your ability to interpret security data, manage alerts, and implement automated remediation strategies within the Prisma Cloud console. Our practice questions are structured to mirror these core competency areas, ensuring that you are tested on the practical application of security policies rather than just theoretical knowledge. By engaging with these practice questions, you gain exposure to the specific scenarios and technical challenges that define the day-to-day responsibilities of a Prisma Cloud engineer.

The most technically demanding aspect of the PSE-Prisma Cloud exam often involves the intricate configuration of security policies and the integration of Prisma Cloud with various cloud service providers. Candidates are frequently challenged by complex scenarios that require them to troubleshoot connectivity issues, interpret compliance reports, and optimize security settings for diverse workloads. This requires more than surface-level knowledge; it demands a comprehensive understanding of how Prisma Cloud interacts with APIs, CI/CD pipelines, and cloud-native services. Mastering these areas is critical because the exam tests your ability to apply security best practices in real-world, high-stakes environments where misconfigurations can lead to significant vulnerabilities.

Are These Real PSE-Prisma Cloud Exam Questions?

The practice questions available on our platform are sourced and verified by the community, consisting of IT professionals and recent test-takers who have sat for the actual exam. Because these individuals have firsthand experience with the testing environment, our questions reflect what appears on the real exam because they are sourced from the community. We prioritize accuracy by utilizing a community-verified model, where users actively participate in refining the content to ensure it remains relevant and technically sound. If you've been searching for PSE-Prisma Cloud exam dumps or braindump files, our community-verified practice questions offer something more valuable, each question is verified and explained by IT professionals who recently passed the exam. This approach ensures that you are studying with high-quality, reliable material rather than unverified or potentially misleading files.

Community verification works through a collaborative process where users discuss answer choices, flag potentially incorrect information, and provide context based on their recent exam experience. When a question is flagged, our community of experts reviews the technical accuracy and provides corrections or clarifications, ensuring the content evolves alongside the exam itself. This peer-review mechanism is what makes the questions reliable, as it captures the nuances of the exam that static study guides often miss. By participating in these discussions, you not only test your knowledge but also gain insights into the reasoning behind specific exam patterns and question structures.

How to Prepare for the PSE-Prisma Cloud Exam

Effective exam preparation for the PSE-Prisma Cloud certification requires a balanced approach that combines theoretical study with hands-on experience. We strongly recommend that candidates spend time in a sandbox or lab environment, actively configuring Prisma Cloud features to understand how they function in practice. Relying solely on documentation is rarely sufficient; you must build a study schedule that allows for consistent review of core concepts, such as policy management, cloud visibility, and compliance reporting. Every practice question includes a free AI Tutor explanation that breaks down the reasoning behind the correct answer, so you understand the concept, not just the answer. This AI Tutor serves as a vital tool during your exam prep, helping you bridge the gap between knowing the right answer and understanding the underlying security principle.

A common mistake candidates make is relying on rote memorization of questions and answers, which fails to prepare them for the scenario-based nature of the actual certification exam. The PSE-Prisma Cloud exam is designed to test your ability to apply knowledge to specific, often complex, security situations, meaning that understanding the "why" behind a configuration is far more important than memorizing the "what." To avoid this pitfall, focus on analyzing why incorrect options are wrong, as this deepens your understanding of the platform's limitations and best practices. Additionally, many candidates struggle with time management; practicing with our timed sets will help you develop the pacing necessary to complete the exam without rushing through critical, complex scenarios.

What to Expect on Exam Day

On the day of your exam, you should be prepared for a format that typically includes multiple-choice questions and scenario-based items that require you to apply your knowledge of Palo Alto Networks security solutions. The exam is administered through a professional testing environment, such as Pearson VUE, which maintains strict security protocols to ensure the integrity of the certification process. You will be expected to demonstrate proficiency across various domains, and the questions are designed to assess your technical judgment in real-world cloud security contexts. While the specific number of questions and the exact passing score can vary, the focus remains consistently on your ability to manage and secure cloud environments using Prisma Cloud. Being familiar with the interface and the types of questions beforehand will help you remain calm and focused throughout the duration of the test.

Who Should Use These PSE-Prisma Cloud Practice Questions

These practice questions are intended for systems engineers, security architects, and cloud administrators who are actively pursuing the Palo Alto Networks certification. Typically, candidates for this exam have several months of hands-on experience with Prisma Cloud and are looking to validate their skills for career advancement or to meet organizational requirements. Whether you are a seasoned professional looking to formalize your expertise or a newer engineer aiming to specialize in cloud security, this exam preparation resource is designed to help you identify knowledge gaps. Passing this certification exam can significantly impact your professional trajectory, signaling to employers that you possess the verified skills necessary to manage complex cloud security deployments.

To get the most out of these practice questions, do not simply read the answer and move on; engage deeply with the AI Tutor explanation to ensure you grasp the underlying security concepts. We encourage you to read the community discussions associated with each question, as these often contain valuable tips and real-world context that can clarify difficult topics. If you find yourself consistently getting certain types of questions wrong, flag them and revisit those specific domains in your official study materials until you are confident. Browse the questions above and use the community discussions and AI Tutor to build real exam confidence.

AI Tutor 👋 I’m here to help!

Palo Alto Networks PSE-Prisma Cloud Exam Actual Questions Palo Alto Networks System Engineer Professional - Prisma Cloud (Page 5 )

QUESTION: 11

Explanation:

QUESTION: 12

QUESTION: 13

QUESTION: 14

Explanation:

QUESTION: 15

use speech_config with recognizer or synthesizer

What the PSE-Prisma Cloud Exam Tests and How to Pass It

Are These Real PSE-Prisma Cloud Exam Questions?

How to Prepare for the PSE-Prisma Cloud Exam

What to Expect on Exam Day

Who Should Use These PSE-Prisma Cloud Practice Questions

Palo Alto Networks PSE-Prisma Cloud Exam Actual Questions
Palo Alto Networks System Engineer Professional - Prisma Cloud (Page 5 )

`use speech_config with recognizer or synthesizer`