PCI CPSA Exam Prep
Card Production Security Assessor (CPSA) Qualification Exam (Page 4 )

• sn_si_admin is an SIR administrator role.
• The prefix helps prevent naming conflicts between applications.
• It does not refer to a “Secure Identity token” or an instance security check.

• Training data for potential bias before model training
• Trained models for bias in predictions
• Model features to help explain how they influence predictions

• A: RAG workflows are typically built using services such as Amazon Bedrock, knowledge bases, and data sources.
• B: Monitoring model quality in production is primarily associated with SageMaker Model Monitor.
• C: Documenting model details is handled by capabilities such as SageMaker Model Cards.

• B. Deploy to a SageMaker endpoint: This is needed for SageMaker-hosted models, not for a model intended to be used directly in Amazon Bedrock.
• C. Register with SageMaker Model Registry: SageMaker Model Registry is unrelated to invoking custom models in Bedrock.
• D. Grant access in Bedrock: Access permissions may be necessary, but they do not replace the required provisioned capacity.

• Security controls
• Processes and procedures
• Compliance evidence
• Performance against contractual requirements

• Service-level agreement (SLA): Defines expected service performance, such as uptime and response times.
• Memorandum of agreement (MOA): Documents a general agreement between parties, but does not necessarily provide audit rights.
• Supply chain analysis: Identifies risks across suppliers and dependencies, but is not a contractual mechanism for reviewing vendor controls.

1. It examines the source MAC address and learns it on the incoming port.
2. It examines the destination MAC address.
3. If the destination MAC is already in the MAC/CAM table, it forwards the frame only through the associated port.
4. If the destination MAC is unknown, it performs unknown-unicast flooding:

• Deterrent control: The signs warning people they may be filmed discourage unauthorized or malicious behavior. They may prevent incidents by influencing behavior, but their primary purpose is to deter.
• Detective control: The CCTV system monitors and records activity so security personnel can identify suspicious or unauthorized actions.

• Preventive: Blocks or prevents an incident, such as a lock or access-control system.
• Corrective: Fixes or restores systems after an incident.
• Directive: Tells people what they must do, typically through policies or procedures.
• Compensating: Provides an alternative control when the preferred control cannot be used.

• Custom domains are supported.
• It provides dedicated compute instances.
• It offers enough storage for the applications.
• It supports multiple instances with load balancing between them.
• It is less expensive than higher tiers such as Premium.

• Free and Shared use shared compute and have limited storage, so they cannot meet the dedicated-instance requirement.
• Basic provides dedicated compute and custom domains, but the question’s requirement for the broader multi-instance/load-balancing capability is intended to point to Standard.

• Footprinting is reconnaissance used to map an organization’s network, hosts, naming conventions, and services.
• A name such as fshare.int.complia.org suggests an internal file-sharing host (fshare) and an internal naming structure (int).
• This can reveal useful information to an attacker before attempting exploitation.

• ISP-assigned address space: Usually determined through public registration and DNS data, not an internal hostname.
• DNS sinkhole bypass: Would involve avoiding redirected malicious-domain queries.
• Initial access: DNS reconnaissance alone does not compromise the server.
• Data exfiltration: DNS tunneling typically generates many encoded or unusually long subdomain queries, not simply a meaningful internal hostname.

• Information sources: Collect security-related data, such as network packets, system logs, audit records, or application events.
• Analysis: Examines the collected data to identify suspicious activity, attacks, or policy violations.
• Response: Takes or recommends action, such as generating alerts, logging the event, or supporting a protective response.

• File policy in Microsoft Defender for Cloud Apps: Can detect activity involving files, but it is not designed specifically to investigate risk from departing or deleted users.
• Access review policy in Microsoft Entra: Reviews whether users should retain access to resources; it does not detect historical document downloads.
• Alert policy in Microsoft Defender for Office 365: Primarily handles alerts for email and collaboration threats, not insider-risk investigations involving departed users.

• Firewalls and routers
• Servers and applications
• Endpoint devices
• Authentication systems
• Cloud services

• Centralized log collection
• Event correlation
• Dashboards and reporting
• Alerting
• Compliance support

• Vulnerability scanner: Finds known technical weaknesses in systems or applications, but does not provide complete supply-chain visibility.
• Penetration test: Simulates attacks against defined targets; it is narrower than a full supply-chain analysis.
• SCAP: A set of standards and protocols for automated security configuration and vulnerability assessment, not a comprehensive supply-chain mapping tool.

• \Pipeline1
• \Folder1\Lakehouse1

• Pipeline1 remains at the workspace root in Workspace1, so it is deployed to the root of Workspace2.
• Lakehouse1 was moved into Folder1, so its full path is preserved as \Folder1\Lakehouse1.
• Fabric deployment pipelines preserve folder paths because an item’s full path is treated as part of its name.

• A business-hours greeting
• An after-hours greeting
• A holiday greeting

• Weekday evenings/nights
• Saturdays and Sundays

1. Auto attendant 1

1. Auto attendant 2

Manager role

DAX 
Country[Manager] = USERPRINCIPALNAME()

• Sales
• Human Resources

CFO role

• See sales for all countries
• See no Human Resources data

• Do not restrict the Country table or Sales table.
• Apply a filter to Human Resources that always returns false, such as:

DAX 
FALSE()

• IaaS: You deploy and manage virtual machines, including the operating system and installed software. Azure manages the physical datacenter, hosts, and networking infrastructure.
• PaaS: Azure manages the infrastructure and operating system, while you deploy and manage your application code. Examples include Azure App Service and Azure Functions.

• Third-party enterprise application with embedded AI: The provider manages most security controls. The customer mainly manages users, data, and configuration.
• Application using an existing third-party FM: The customer controls the application and its inputs/outputs, but the provider controls the underlying model and infrastructure.
• Fine-tuning a third-party FM: The customer has additional responsibility for training data, data protection, and model behavior, but still depends on the provider’s base model and platform.
• Building and training a model from scratch: The customer controls the model, training data, application, deployment, and many security safeguards. This creates the greatest security ownership.

• The message came from the claimed sender (authentication)
• The message was not altered in transit (integrity)
• The sender cannot easily deny having signed and sent it (non-repudiation)

• Compliance standards: May be a reason in some organizations, but it is not the primary security benefit.
• Increase delivery rates: Digital signatures do not generally improve email delivery.
• Block phishing attacks: Signatures can help recipients verify legitimate messages, but they do not block phishing by themselves.

• IKE (Internet Key Exchange) negotiates the IPsec security association, including:

• ESP (Encapsulating Security Payload) protects the data after negotiation by providing encryption and optionally authentication.
• AH provides authentication and integrity but does not encrypt traffic.
• TLS is used for protocols such as HTTPS, not for negotiating IPsec parameters.

• A is correct: It establishes the revised dates and identifies the effect on the critical path.
• B is premature: Stakeholders should be informed after the impact has been assessed and the updated schedule is understood.
• C is not automatically appropriate: Fast-tracking may introduce additional risk and should be considered only after analyzing schedule options.
• D is premature: Adding resources may not resolve a dependency and could increase costs without addressing the actual constraint.

• GPS coordinates
• Date and time the image was taken
• Camera or device model
• Exposure settings

• Log data: Records events or activities, such as system or application activity.
• Encrypted data: Information intentionally encoded to prevent unauthorized access.
• Sensitive data: A broad classification for information requiring protection; geolocation may be sensitive, but the technical type stored in the image is metadata.

• SQL injection
• Cross-site scripting (XSS)
• Malicious or malformed web requests
• Some application-layer attacks

• Layer 4 firewall: Filters based mainly on IP addresses, ports, and transport protocols; it cannot deeply inspect web application content.
• NGFW: Provides advanced network filtering and may include application awareness, but a WAF is more specifically designed to protect web applications.
• UTM: Combines several security functions in one appliance, but it is not the most targeted solution for a web portal.

• Fine-tuning requires a properly formatted training dataset.
• For classification or instruction-style fine-tuning, examples are supplied in JSONL format.
• Each line represents one training example, typically containing the input prompt and the desired completion or label.
• The file must then be uploaded or made available to the Microsoft Foundry fine-tuning workflow.

• A: Prompt Flow is useful for prompt experimentation, but it is not required to start fine-tuning.
• B: You do not need to deploy the base model to an online endpoint before fine-tuning.
• C: Tracing supports observability and evaluation, but it does not prepare the fine-tuning job or dataset.

• Three DHCP scopes: Each VLAN has its own IPv4 subnet. DHCP scopes are subnet-specific, so create one scope for:

• Two DHCP relays: DHCP client discovery begins as a broadcast, and broadcasts do not cross routers or VLAN boundaries. Therefore, configure a DHCP relay on the router or Layer 3 switch interface for each client VLAN.

• Due diligence: Researching and evaluating a third party before entering or continuing a business relationship.
• Internal audit: Evaluates controls within the organization itself.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.
• Attestation: A formal statement or report—such as a SOC 2 report—provided by an independent party about an organization’s controls.

• Confirming the data has the required columns and data types
• Handling missing or duplicate records
• Converting data into a suitable format
• Selecting or engineering useful features
• Splitting it into training, validation, and test sets

1. Prepare the training data
2. Select an algorithm or configure AutoML
3. Train the model
4. Evaluate its performance
5. Tune hyperparameters if needed
6. Deploy the model

• MTTC: Time required to contain or limit the incident’s impact — best match.
• MTTR: Time required to remediate or recover from the incident; this may include eradication, restoration, and cleanup, which goes beyond merely stopping spread.
• MTTD: How long it takes to discover the incident.
• MTBF: Average time between failures, generally a reliability metric.

• A — If there is no demand, there should be no production.

• B — Not all sales equal profit.

• C — Stocking up on inventory is bad for business.

• D — All costs, except materials, are considered fixed.

• E — Departments should operate at full capacity regardless of bottlenecks.

• Firewall
• Intrusion prevention and detection
• Antivirus or antimalware
• Web and email filtering
• Virtual private networking (VPN)
• Sometimes content filtering and centralized reporting

• CHAP: Uses a challenge-response exchange, so the password is not directly transmitted.
• IPsec: Provides authentication, integrity, and encryption for IP communications.
• EAP: An authentication framework that supports stronger methods, such as certificates or token-based authentication.

• Assign endpoints to a group based on the result of one policy.
• Use that group as the scope of another policy.
• This effectively passes the endpoints from one policy’s processing flow to another.

• Record changes — a flow can start when a record is updated or otherwise changes.
• Schedules — a flow can run at a specified date/time or on a schedule.
• Record inserts — a flow can start when a new record is created.

• Subflows are reusable flow components called by another flow; they are not normally trigger types.
• Record views do not generally initiate a Flow Designer flow.

• Accept: Acknowledge the risk and take no additional action.
• Transfer: Shift the risk or its financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reduce the likelihood or impact of the risk, such as by implementing security controls.
• Avoid: Eliminate the activity or exposure that creates the risk.

• File1 contains the evaluation configuration—for example, evaluators, test data, thresholds, or evaluation parameters.
• The GitHub Actions workflow must reference that file through the evaluation-config input so the action knows which evaluation to run.
• project-endpoint identifies the Microsoft Foundry project, but it does not identify the evaluation definition. It is also typically required, but it does not answer the specific requirement about using File1.

• Amazon EC2 instances — ???????? ?? ?? ??????? CPU, memory ??? instance size ???????? ???????
• AWS Lambda functions — memory configuration ?????????? ???????
• Amazon EBS volumes — volume type ?? size optimize ???? ???????
• ??????? ECS workloads — resource configuration ? cost optimization-?? ???????

• Memory ? compute usage ?????????? ???? custom code ????? ???? development ? maintenance ??????
• Cost allocation tags ???? ????? ??? ?????? ???? ??????? ???; inefficient resource ??????? ?? recommendation ???? ???
• CloudTrail resource ???? ?? API activity ??????, resource utilization ????

• Actions that call external APIs
• Subflows
• Connection and credential aliases
• Supporting integration logic

• Action — A reusable operation within a flow, such as “Create a record” or “Send email.”
• Connection — Defines how ServiceNow authenticates and communicates with an external system.
• Integration step — A general flow step, not the name for the packaged integration.

• NTLM: Uses Windows challenge-response authentication and does not provide the normal web-based MFA redirect flow.
• Single Sign-On: Automatically reuses existing credentials; it is intended to avoid prompting, not to support an MFA workflow.
• Transparent: Intercepts the session without redirecting the user to a separate authentication page.

DAX 
Blue Sales = 
CALCULATE( 
    [Total Sales], 
    KEEPFILTERS('Product'[Color] = "Blue") 
)

• CALCULATE evaluates [Total Sales] after applying an additional filter.
• 'Product'[Color] = "Blue" restricts the calculation to blue products.
• KEEPFILTERS ensures the existing filter context is preserved. For example, filters for year, region, or customer remain active. If Color is already filtered, the blue condition is applied as an intersection rather than replacing the existing filter.
• Avoid ALL, because it removes filters and would not maintain the existing context.

• Disable high concurrency: Changes workspace-wide behavior and is not the targeted way to isolate these workloads.
• Modify the number of executors: Adjusts capacity and performance, but does not provide workload isolation.
• Set the default environment: Controls libraries and runtime configuration, not compute isolation.

1. x = -100
2. -100 < x < 100
3. 100 = x < 1000
4. x = 1000

• -500 ? class 1
• 0 ? class 2
• 100 ? class 3
• 1000 ? class 4

• A: CEO-sponsored formal policy — demonstrates executive support, but sponsorship at one point in time may not sustain commitment.
• B: Security awareness training — primarily improves employee behavior, not senior management commitment.
• C: Periodic alignment reviews — ongoing reviews show that security remains relevant, supports business priorities, and uses resources appropriately.
• D: Senior management signoff on the strategy — useful for governance and accountability, but signoff is generally a one-time event.

• Process Builder: Automates actions based on record changes; it does not create interactive user forms.
• Approval Process: Routes records for approval and captures approval decisions.
• Outbound Message: Sends information to an external system; it does not provide a user interface.

• Accept: Acknowledging the risk and choosing not to take additional action.
• Transfer: Shifting the risk or financial consequences to another party, such as an insurer.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or access restrictions.
• Avoid: Eliminating the activity that creates the risk.

• Bronze: Raw ingested data
• Silver: Cleaned, validated, and transformed data
• Gold: Business-level data for analytics, dashboards, and reporting

• Deterministic approve/reject results
• Strict adherence to predefined rules
• Consistent, reproducible outcomes
• Auditability and regulatory compliance

• Create the field in the CRM on the relevant person records—typically Lead and Contact in Salesforce.
• Give the Marketo Sync User read/write access to the field.

• B: Não é preciso implantar o modelo em um endpoint do Amazon SageMaker, pois o Bedrock já oferece a infraestrutura de inferência.
• C: O SageMaker Model Registry é usado para gerenciar modelos no SageMaker, não é requisito para modelos customizados no Bedrock.
• D: Não existe uma etapa geral de “conceder acesso” ao modelo customizado como requisito principal de uso. O ponto essencial é adquirir o Provisioned Throughput.

• Frequency/likelihood = how often or how likely the risk is to occur.
• Severity/impact = how damaging or costly the consequences would be.

• A minor equipment fault occurring frequently may have high frequency but low severity.
• A major cyberattack occurring rarely may have low frequency but high severity.
• A risk that happens often and causes substantial losses has high frequency and high severity.

• The requirement is an assessment of the Azure environment’s design, which requires a support plan offering proactive architectural guidance.
• Premier support would provide this capability, but it is a high-cost option.
• Since the requirement says to minimize expenses, Premier is not the best recommendation.
• A lower-cost plan with the required advisory/design-review capability—historically Professional Direct in Azure’s support-plan model—would be more appropriate.

Recommended process

1. Access each switch’s terminal.
2. Use help to identify available commands.
3. Use the MAC table command, such as:

text 
   show mac-address-table

1. Use VLAN information, such as:

text 
   show vlan

1. Use interface information, such as:

text 
   show ip interface brief

1. Record each device’s: