Pegasystems PEGAPCSA80V1_2019 Exam Prep
Pega Certified System Architect (PCSA) 87V1 (Page 4 )

• Personally identifiable information (PII) detection

• Prompt Shields

• Self-harm content filtering addresses self-harm-related content.
• Violence content filtering addresses violent content.
• Neither protects customer PII or detects document-based prompt injection.

• Ease of exploitation
• Required privileges
• User interaction
• Impact on confidentiality, integrity, and availability

• CVE: Identifies and names a specific publicly known vulnerability; it does not measure severity.
• OSINT: Refers to intelligence gathered from publicly available sources.
• SOAR: Automates and coordinates security operations, such as alert response and playbooks.

• Documented and formally requested
• Analyzed for security, cost, and operational impact
• Reviewed and approved by the appropriate personnel
• Tested before implementation
• Tracked and reversible if problems occur

• Risk management process: Identifies and evaluates risk, but does not directly authorize design changes.
• Product design process: Applies primarily while creating or developing the product.
• Design review process: May have identified the issues, but the next step for changing an already released design is controlled change management.

• CSIRT: A Computer Security Incident Response Team that handles and coordinates incident response.
• CVSS: A scoring system used to rate the severity of vulnerabilities.
• SOAR: Security Orchestration, Automation, and Response technology used to automate security workflows.

• Low usage during the first three weeks
• Very high usage during the last week

• High availability: Keeps services running despite failures.
• High latency: Means slow response times; it is not a benefit.
• Load balancing: Distributes traffic across resources but does not specifically address scaling resources up and down.

text 
ip route vrf Customer1 172.16.1.0 255.255.255.0 172.16.1.1 global 
ip route vrf Customer2 192.168.1.200 255.255.255.255 192.168.1.1 global 
ip route 192.168.1.0 255.255.255.0 Vlan10 
ip route 172.16.1.0 255.255.255.0 Vlan20

• The route in Customer1 VRF provides a path back to the Customer2 subnet, 172.16.1.0/24.
• The route in Customer2 VRF provides a path to the FTP server, 192.168.1.200.
• The keyword global tells the router to resolve the next hop using the global routing table, enabling controlled route leaking between the VRF and global table.
• The global routes identify the VLAN interfaces used to reach each customer network.

• Reviewing security policies and standards checks whether controls are documented, not whether they work.
• Reviewing security logs may show that monitoring is occurring, but does not directly establish that preventive controls are effective.
• Analyzing technical security practices is broad and may assess implementation, but it is less objective than an actual controlled attack.

• Design/compliance effectiveness: policies, standards, and procedures
• Operational effectiveness: logs, records, and evidence that controls operate
• Technical security effectiveness: penetration testing or vulnerability testing

• Access controls — ensuring only authorized users can access it.
• Encryption — protecting the data if it is intercepted or exposed.

• Compare each server’s drive specifications and performance data.
• Identify the drive that is faulty, slow, or mismatched.
• Replace it with a drive that matches the required interface, capacity, and performance characteristics.
• Avoid selecting a slower drive, because storage performance can bottleneck the entire server.
• In a redundant array, use a compatible replacement so rebuilding does not create unnecessary performance degradation.

• Deterministic approve/reject results
• Strict adherence to predefined rules
• Consistent, reproducible outcomes
• Auditability and regulatory compliance

• Remote and global work: Access is based on the approved device, not a specific office or geographic location.
• Seamless login: Users may not need to repeatedly enter credentials on a recognized device.
• Limited equipment: It uses devices employees already have rather than requiring separate hardware.

• Geotagging: Restricts access based on location and may prevent legitimate remote work.
• Smart cards: Require issuing and managing additional physical equipment.
• Time-based logins: Limit access by time and do not provide a seamless authentication experience.

• Crowd-sourced evaluation: Requires recruiting and managing many evaluators.
• Human-worker evaluation: Provides human judgment but requires coordination, labeling instructions, and quality control.
• RLHF: Is a training and alignment process, not simply a low-overhead model comparison method.
• Automatic model evaluation: Quickly evaluates outputs using predefined toxicity or quality metrics with minimal manual effort.

• Honeypots: Deliberately vulnerable or attractive systems designed to lure attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of compromise.
• DNS sinkholes: Redirect requests for known malicious domains to a controlled internal system instead of allowing the connection. This can identify infected hosts attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it protects data but does not primarily detect attackers.
• CI/CD: Automates software development and deployment processes.
• Threat modeling: Identifies potential threats and weaknesses before or during system design.
• Data obfuscation: Makes data harder to understand, but it is not an attacker-detection method.

• Outer packet: 10.5.1.1 > 52.165.16.154
• IPv4 protocol field: 41, which indicates IPv6 encapsulation
• Inner packet: IPv6 traffic between 2001:... addresses

• MAC address spoofing: Changes Layer 2 addressing; it does not explain the IPv6-in-IPv4 structure.
• Steganography: Hides data inside files or media, not visibly in a tunneled protocol.
• Broken encryption: No evidence of encryption being cracked.
• On-path sniffing: Involves intercepting traffic, not sending data to an external host.

• Restrict a port to a defined number of MAC addresses
• Use statically configured or “sticky” MAC addresses
• Shut down or restrict the port when violations occur

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect suspicious traffic but is not the primary control for switch-port MAC limits.
• NGFW: Filters routed network traffic, not the switch’s CAM/MAC address table directly.

• Maintain head office control: Transfer pricing generally supports decentralisation rather than direct head-office control.
• Establish centralised decision making: This conflicts with divisional autonomy.
• Develop a top-down culture: Transfer pricing is intended to support empowered divisions and goal congruence, not impose purely top-down management.

• Resources that do not need internet access should remain on private network segments.
• Internet-facing access should be restricted to systems that require it.
• Access should be explicitly allowed rather than broadly exposed.

• A: A single administrator with access to core functions may violate least privilege if that access is broader than necessary.
• B: Inspecting traffic supports monitoring and defense, but does not itself limit privileges.
• C: Updating routing configurations supports availability and connectivity, not least privilege.

• A. IDS attack signatures: Primarily detects suspicious network activity, not necessarily malware embedded in uploaded files.
• C. Load balancer: Improves availability and distributes traffic; it does not inspect documents for malware.
• D. WAF: Protects web applications from attacks such as SQL injection and command injection, but its primary role is not scanning uploaded PDFs for malware.

• Threat perspective: Focuses on possible attacks, but may seem technical or hypothetical.
• Compliance perspective: Can motivate action, but compliance alone does not demonstrate the broader business value of governance.
• Policy perspective: Policies are important, but they are a means of implementing governance, not its primary business justification.

• Share of overall contribution: part of the organization’s total contribution is allocated to the supplying division.
• Dual pricing: the supplying division may record a higher transfer price while the receiving division records a lower price, with central accounts absorbing the difference.
• A centrally imposed price range: this may allow the transfer price to be set above variable cost, helping the supplying division recover fixed costs.

• A — If there is no demand, there should be no production.

• B — Not all sales equal profit.

• C — Stocking up on inventory is bad for business.

• D — All costs, except materials, are considered fixed.

• E — Departments should operate at full capacity regardless of bottlenecks.

• Drops packets when traffic exceeds a certain bitrate: This describes traffic policing, not shaping.
• Fragments large packets and queues them: Shaping does not fragment packets as its primary congestion-control action.
• Drops packets randomly from lower-priority queues: Packet dropping may occur if a shaping queue becomes full, but it is not the defining behavior.

• Shaping: buffers and delays excess traffic.
• Policing: drops or marks traffic that exceeds the configured rate.

• A: Describes a broad purpose and direction, but is not the specific CIMA definition.
• C: “Scoping out” activities is too vague and incomplete.
• D: Combines long-term goals, strategies and policies, but describes a wider strategic-planning statement rather than the definition of strategy itself.

• Have a definite, clear objective (C): Know exactly what you want to communicate. A clear purpose reduces ambiguity and irrelevant information.
• Plan the communication (E): Decide what to say, who needs the information, the appropriate channel and the best timing.
• Seek feedback (F): Check that the receiver understood the message. This could involve asking for confirmation or inviting questions.

• Ask questions (A): Usually associated with the receiver checking or clarifying information, although a sender may use questions in practice.
• Give feedback (B): Feedback is generally the receiver’s response to the sender’s message. The sender’s responsibility here is to seek feedback.
• Consider their contribution (D): This is not a standard sender-focused step in the communication process. The sender should consider the receiver’s needs and perspective, but the wording is less precise than the three recognised actions above.

• 2000::/3 — Global unicast, used for publicly routable IPv6 addresses.
• FC00::/7 — Unique local, used for private internal addressing.
• FE80::/10 — Link-local, used only on the local network segment and not routed between subnets.

• The requirement is an assessment of the Azure environment’s design, which requires a support plan offering proactive architectural guidance.
• Premier support would provide this capability, but it is a high-cost option.
• Since the requirement says to minimize expenses, Premier is not the best recommendation.
• A lower-cost plan with the required advisory/design-review capability—historically Professional Direct in Azure’s support-plan model—would be more appropriate.

Statement 1 — Correct

Statement 2 — Correct

• staff use the new system;
• transactions and reports are checked;
• problems are corrected;
• feedback is collected.

• Phased changeover: different parts or functions are introduced in stages, often according to a planned sequence.
• Pilot changeover: one representative department, branch or group acts as a test site before wider implementation.
• Parallel changeover: old and new systems operate at the same time.
• Direct changeover: the old system is stopped and the new one starts immediately.

• Red team: Simulates attackers; exploits weaknesses to test security.
• Blue team: Defends systems; monitors, detects, and responds to attacks.
• Purple team: Combines red- and blue-team efforts to improve detection and defense.
• White team: Oversees or manages the test, defining rules, scope, and authorization.

1. Create a temporary Onboarding OU.
2. Move the new account into it.
3. Move the restrictive SCPs from the organization root to the Production OU.
4. Allow the account to update AWS Config.
5. Move the account into Production after onboarding.

• An SCP attached at the organization root applies to every account and OU beneath it.
• An SCP attached to the Production OU applies only to accounts in that OU.
• Therefore, moving the restrictive SCP from the root to Production temporarily exempts the onboarding account without weakening the policies for existing production accounts.
• Once onboarding is complete, moving the account into Production subjects it to the normal restrictions.

• Scheduling overlapping working hours for critical collaboration
• Assigning independent tasks that can proceed asynchronously
• Adding clear handoffs between offices
• Documenting decisions, questions, and required inputs
• Building appropriate time into the schedule for responses

• Discovers sensitive data in Amazon S3 buckets
• Uses machine learning and pattern matching to identify data such as personally identifiable information (PII)
• Helps assess S3 security and privacy risks
• Generates findings for potentially sensitive or exposed data

• Amazon Detective: Investigates security findings and performs root-cause analysis.
• Amazon GuardDuty: Detects threats and suspicious activity across AWS accounts and workloads.
• AWS IAM Access Analyzer: Identifies resources that are accessible from outside their intended trust zone, such as publicly accessible S3 buckets.

• Restarting the device: may fix software problems, but not a directional connection issue.
• Swollen battery: is a safety concern, but would not typically cause recognition only in one orientation.
• Failing cable: possible in general, but less likely because it works on other similar devices.
• Dirty or damaged port: best matches the symptoms. Inspect and carefully clean the port, or have it serviced if damaged.

• Crash cart: Provides local physical access, not remote access.
• Jump box: A secured intermediary used to reach devices over the normal network; it may be inaccessible if the appliance has not booted.
• Secure Shell (SSH): Requires the device’s operating system and network services to be running properly.

• AWS Network Firewall can inspect and block traffic across a VPC when traffic is routed through the firewall. A Drop action rule can deny traffic from the suspicious source IP.
• GuardDuty findings are sent to Security Hub.
• A Lambda function can be invoked when Security Hub receives a new GuardDuty finding, extract the source IP, and update the Network Firewall policy with a blocking rule.

• GuardDuty threat lists: Used to identify or increase the severity of findings; they do not directly block VPC traffic.
• AWS WAF: Protects supported web applications, such as CloudFront or Application Load Balancers. It does not provide general VPC-wide traffic blocking.
• GuardDuty suppression rules: Suppress or hide findings. They do not block the suspicious traffic.

• Restrict a port to a defined number of MAC addresses
• Use statically assigned or “sticky” MAC addresses
• Shut down or restrict the port when violations occur

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect suspicious network activity, but is not the primary control for limiting switch MAC entries.
• NGFW: Filters traffic at the network boundary; it does not directly prevent MAC table flooding on access switches.

• MAC flooding: Overwhelms a switch’s MAC address table, potentially causing traffic to be broadcast.
• DNS spoofing: Provides false DNS responses to redirect users.
• ARP poisoning: Sends false ARP information to associate an attacker’s MAC address with another device’s IP address.

• Whether a user has a console password
• Password age and last password change
• Whether MFA is enabled
• Access key status
• Access key creation date and last-use information
• Access key age, which helps audit rotation

• IAM Access Analyzer identifies unintended access to resources; it does not report credential age or rotation.
• AWS Artifact provides AWS compliance documents and agreements, not details about your IAM users.
• AWS Audit Manager helps collect evidence for audits, but it is not the direct tool for viewing IAM credential rotation details.

• Suspended an operator who refused to use unsafe equipment.
• Paid another operator a bonus for using it.
• Prioritised short-term productivity over employee safety.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — The factory’s safety record is likely to be poor.

• A Layer 2 switch checks the destination MAC address in its MAC address table (CAM table).
• If the destination MAC is unknown, the switch cannot select a specific outgoing port.
• It therefore performs unknown-unicast flooding, sending the frame out every other port in that VLAN.
• The frame is not sent back through the port where it arrived.

• Microservices: An application-design approach that divides an application into smaller services. It does not inherently reduce the number of operating systems.
• Virtualization: Creates virtual machines, but each VM generally requires its own complete operating system. This improves isolation but does not minimize OS instances as effectively.
• Infrastructure as code: Uses code to automate infrastructure deployment and configuration. It improves consistency but does not determine how many operating systems are used.

• Security controls
• Processes and procedures
• Compliance evidence
• Performance against contractual requirements

• Service-level agreement (SLA): Defines expected service performance, such as uptime and response times.
• Memorandum of agreement (MOA): Documents a general agreement between parties, but does not necessarily provide audit rights.
• Supply chain analysis: Identifies risks across suppliers and dependencies, but is not a contractual mechanism for reviewing vendor controls.

• ARP poisoning: Redirects or intercepts local network traffic; monitoring would typically show suspicious ARP changes or man-in-the-middle behavior.
• Jamming: Interferes with wireless or radio signals. It would affect connectivity, not usually show a server-specific overload.
• Kerberoasting: Attempts to obtain and crack Kerberos service-account hashes; it does not normally cause a system outage.

• Link-local — FE80::/10; valid only on the local link/subnet and not routed by routers.
• Multicast — FF00::/8; identifies a group of interfaces rather than a private address range.
• Global unicast — 2000::/3; publicly routable IPv6 addressing.

1. Create or verify cost groups

1. Set up the item model group

1. Create the costing version

1. Enter or calculate item costs

1. Activate the standard costs

• Employees can work from any location, including remote sites and offices worldwide.
• Login can be relatively seamless after the device is registered.
• It does not require distributing additional physical authentication equipment.

• Geotagging: Identifies location, but location alone is not a strong authentication method and may prevent legitimate remote access.
• Smart cards: Provide strong authentication but require card readers and physical cards, increasing equipment and management requirements.
• Time-based logins: Typically involve one-time codes that users must enter, making the experience less seamless and potentially requiring a token or authenticator app.

Question 3: AWS Storage Gateway File Gateway

• A: S3 bucket per user — S3 is object storage, not a traditional shared file system; mounting it requires extra tools and is less efficient.
• B: File Gateway — Provides a local file share using standard file protocols while storing files in Amazon S3. This preserves convenient local access and extends storage capacity.
• C: WorkSpaces and WorkDocs — Designed for virtual desktops and document collaboration, not large shared file storage.
• D: EC2 with EBS — EBS is attached to one EC2 instance and is not designed for direct multi-user file sharing.

• Documented and evaluated
• Assessed for security, cost, and operational impact
• Reviewed and approved by the appropriate personnel
• Tested before implementation
• Tracked with version history and rollback procedures

• Risk management process: May help assess the issues, but it does not authorize and manage design changes.
• Product design process: Applies primarily while creating a new design.
• Design review process: Normally evaluates a design before release; this design is already released.

• Matching hashes: The software is unchanged.
• Different hashes: The software was modified or corrupted.

• Encryption: Protects confidentiality.
• Baselines: Define approved configurations or normal performance.
• Tokenization: Replaces sensitive data with tokens.