PEOPLECERT IASSC Lean Six Sigma - Green Belt Exam Prep
IASSC Lean Six Sigma - Green Belt (Page 8 )

• A. IDS attack signatures: An IDS primarily detects suspicious network activity; it is not the best tool for scanning uploaded files.
• C. Load balancer: Improves availability and distributes traffic but does not inspect files for malware.
• D. WAF: Protects web applications against attacks such as SQL injection and command injection. It may inspect HTTP requests, but malware scanning of uploaded PDFs is the key requirement here.

• Unfamiliar locations or IP addresses
• Anonymous or malicious IP addresses
• Leaked credentials
• Unusual sign-in behavior

• Label applied does not automatically exclude a file from Copilot.
• Encryption/usage rights determine whether Copilot can access the file’s content.
• If the user has no permission under Label2, File3 should be unavailable to Copilot for that user.
• File3’s label might be inherited by derived content only if File3 was actually processed and contributed by an authorized user; it should not be treated as contributing merely because it exists in the source set.

• A. PsFile — Correct: Displays files opened remotely on a system. This reveals shared resources and user activity.
• B. UserInfo — Correct: Gathers information about user accounts, supporting account and privilege enumeration.
• C. PsPasswd — Answer key lists it: This is questionable. PsPasswd is primarily used to change passwords remotely, not enumerate information. The key may classify it broadly as a Windows account-management tool, but it is not a strong enumeration example.
• D. WinSSLMiM — Incorrect: Used for SSL man-in-the-middle activity, not enumeration.

• Type 1 hypervisor: Runs directly on the physical hardware (“bare metal”).
• Type 2 hypervisor: Runs inside the host OS as an application.

• Bare-metal installation: Type 1
• Local management only: Not a defining characteristic
• Specific hardware requirements: Not the key distinction

• Proxy server: Acts as an intermediary for requests, but does not necessarily provide an encrypted connection to the corporate network.
• NGFW: A firewall with advanced inspection and filtering capabilities; it may support VPNs but is not the remote-access solution itself.
• Security zone: A logical network grouping based on trust or security requirements, not a method for remote access.

Recommended process

1. Access each switch’s terminal.
2. Use help to identify available commands.
3. Use the MAC table command, such as:

text 
   show mac-address-table

1. Use VLAN information, such as:

text 
   show vlan

1. Use interface information, such as:

text 
   show ip interface brief

1. Record each device’s:

• Maximum response and resolution times
• Expected uptime or availability
• Performance requirements
• Escalation procedures
• Consequences for failing to meet requirements

• SOW: Defines a project’s scope, tasks, deliverables, and schedule.
• MOA: Documents specific responsibilities agreed upon by two parties.
• MOU: Records a general understanding or intent to cooperate.

• Driver node: Coordinates Spark jobs and runs in the compute environment.
• Worker node: Executes tasks and processes data.
• Databricks Filesystem (DBFS): Provides storage access for data used by compute resources.

• Feedback form: Captures opinions, not necessarily actual behavior; users may not respond.
• Questionnaire: Relies on memory and subjective judgments about usefulness.
• Interviews: Can provide valuable qualitative insights, but a sample of users may not represent overall usage accurately.

• Internal hostnames and subdomains
• Network structure and naming conventions
• Servers and services
• Relationships between systems

• Determining ISP-assigned address space: Usually involves external registration and DNS information, not internal host discovery.
• Bypassing DNS sinkholing: Would require evidence that malicious DNS requests avoided redirection.
• Initial access: DNS queries alone do not show that the attacker gained access.
• Exfiltrating data: DNS tunneling can do this, but the snippet would typically show encoded or unusually long DNS queries.

• Form layout
• Related lists
• Dictionary settings
• UI policies
• Client scripts
• Views and field visibility

• Personalization usually affects only the individual user.
• System configuration can affect other users, depending on its scope and conditions.

• A — Improved management of storage space: Correct.

• B — Improved supplier relationships: Correct.

• C — Improved pricing decisions: Correct.

• D — Non-product-specific costs must be apportioned: Incorrect.

• E — Profitability of each customer group: Incorrect.

• An Adj-SID does not necessarily need manual configuration.
• It can often be dynamically allocated by the router, although manual configuration may also be possible.
• The adjacency information is advertised through the IGP, such as IS-IS or OSPF.

• It is identified by an Adj-SID.
• It represents a particular adjacency of a node.
• Its meaning is generally local to the advertising node; unlike a Node-SID, it is not a globally reusable instruction across the network.

• Two-part tariff pricing: $10 per unit
• Dual pricing: $20 per unit

Two-part tariff pricing

Dual pricing

• Division X, the seller, is credited with the market price: \(\$20\)
• Division Y, the buyer, is charged the marginal cost: \(\$10\)

• AWS Network Firewall can inspect and block traffic across a VPC when traffic is routed through the firewall. A Drop action rule can deny traffic from the suspicious source IP.
• GuardDuty findings are sent to Security Hub.
• A Lambda function can be invoked when Security Hub receives a new GuardDuty finding, extract the source IP, and update the Network Firewall policy with a blocking rule.

• GuardDuty threat lists: Used to identify or increase the severity of findings; they do not directly block VPC traffic.
• AWS WAF: Protects supported web applications, such as CloudFront or Application Load Balancers. It does not provide general VPC-wide traffic blocking.
• GuardDuty suppression rules: Suppress or hide findings. They do not block the suspicious traffic.

• B — The glass core component is encased in a cladding.

• D — Light is transmitted through the core of the fiber.

• BNC connectors are associated mainly with coaxial copper cabling, not standard fiber connections.
• Data does not pass through the cladding; the cladding helps reflect and contain the light.
• RJ-45 connectors are used with copper Ethernet cabling, not fiber-optic interfaces.

• CPU: Number of virtual CPUs and, where applicable, CPU reservations.
• Memory: Amount of memory and memory reservations.

• Network interface: Usually configured through the VM or workload networking configuration.
• PCI devices: Specialized hardware and not a standard VM Class resource in this context.
• Storage: Typically selected through storage policies or the VM’s storage configuration.

• Scanning is not essential during a power outage.
• A scanner can consume UPS battery power without helping the user save cloud documents or shut down safely.
• The UPS should be reserved for the computer, monitor, and necessary network equipment.
• The surge protector helps protect the scanner from voltage spikes, but it will not keep it running during an outage.

• Third-party attestation: Provides independent validation, but is typically periodic and performed by an external party.
• Penetration testing: Simulates attacks to identify exploitable vulnerabilities; it does not primarily track compliance.
• Vulnerability scans: Identify technical weaknesses, but do not provide a detailed review of procedures or compliance activities.

• Minimum
• Maximum
• Average
• Count
• Null/empty values
• Distinct values

• Enable column profile
• Enable details pane
• Show column profile in details pane

• state preserves the client’s original context, such as the specific idea URL the user requested.
• The portal sends that value in the OAuth authorization request.
• Salesforce returns it after authorization, allowing the portal to redirect the user to the original idea rather than the Ideas home page.

• IRR assumes that interim cash flows can be reinvested at the project’s own IRR. This may be unrealistic, especially when the IRR is very high.
• MIRR assumes reinvestment at a specified rate, usually the company’s cost of capital or another realistic reinvestment rate.

• B: MIRR does not specifically favour projects with long payback periods.
• C: MIRR and IRR can rank competing projects differently.
• D: MIRR is not always higher than IRR; it may be higher or lower depending on the cash flows and reinvestment rate.

• Plenum: Describes a fire-resistant cable jacket rating, not a transmission medium or speed.
• Ethernet: Describes a networking technology; Ethernet can use copper or fiber, so the term alone does not identify the fastest cable type.
• DAC (Direct Attach Copper): Uses copper and is typically intended for short-distance, high-speed connections in data centers.

• A password cracker would normally be identified by behavior such as loading password hashes or attempting dictionary/brute-force attacks.
• The question describes a routine audit, not password recovery.
• Simply encountering a protected file during an audit is characteristic of a misconfigured or insufficiently privileged FIM.

• A. IDS attack signatures: Detects suspicious network activity, but is not primarily designed to scan uploaded files for malware.
• C. Load balancer: Distributes traffic among servers and improves availability; it does not inspect files for threats.
• D. WAF: Protects web applications from attacks such as SQL injection and command injection, but its primary role is not malware scanning of uploaded documents.

• Sales process: Controls which Opportunity Stage values are available.
• Record type: Associates the appropriate sales process with a business scenario and controls available picklist values.
• Page layout: Controls which fields are displayed and whether they are required or read-only.

• Energy Market Team 1 ? Record Type 1, Sales Process 1, Page Layout 1
• Energy Market Team 2 ? Record Type 2, Sales Process 2, Page Layout 2
• Services/Installation Team ? Record Type 3, Sales Process 3, Page Layout 3

• Un AG puede tener réplicas en Windows y Linux desde SQL Server 2017; por tanto, una réplica Windows y otra Linux es posible.
• Sin embargo, las réplicas de un AG deben utilizar normalmente la misma versión principal de SQL Server. Una instancia SQL Server 2017 no puede tener directamente una réplica secundaria SQL Server 2019 como configuración normal y permanente.
• En tu escenario, SQL Server 2017 en Windows y SQL Server 2019 en Linux no se pueden añadir directamente como réplicas equivalentes de AG1. Primero habría que realizar un proceso de actualización/migración compatible, por ejemplo mediante una actualización gradual o una tecnología de migración como log shipping o distributed availability groups, según el diseño.

• Tipo de clúster y mecanismo de quorum.
• Failover normalmente manual en configuraciones multiplataforma.
• Edición y características compatibles.
• Configuración de endpoints y permisos.
• Limitaciones específicas de SQL Server en Linux.

• Access controls — ensuring only authorized users can access it.
• Encryption — protecting the data if it is intercepted or exposed.

• A. Periodically rotate responsibilities: May reduce some risks, but it does not directly detect unauthorized changes.
• B. Review segregation-of-duties conflicts: Identifies incompatible access combinations, not whether a specific data change was unauthorized.
• C. Log changes in an outside application: Logs provide evidence, but someone must review and analyze them. Logging alone does not detect misuse.
• D. Independent review: Directly detects unauthorized changes and reduces the risk that the person making the change can conceal it.

• Share files with the wrong people
• Use public links unnecessarily
• Fail to classify sensitive data
• Upload data to unauthorized services
• Misunderstand company sharing policies

• A — Step-up authentication: Helps protect administrator accounts, but does not directly address improper file sharing by users.
• C — Password complexity: Helps reduce password attacks, not accidental data disclosure.
• D — Mobile device management: Secures managed mobile devices, but does not directly control file-sharing behavior across the organization.

• STIX: A standardized format for exchanging cyber-threat intelligence.
• OVAL: A language and framework for describing and assessing system vulnerabilities and configuration issues.
• Threat intelligence feed: Provides current indicators or threat information, but is not specifically a reference for common application exploitation techniques.
• CVE: A catalog of publicly disclosed vulnerabilities, identified by unique CVE numbers.

• Link-local — FE80::/10; valid only on the local link/subnet and not routed by routers.
• Multicast — FF00::/8; identifies a group of interfaces rather than a private address range.
• Global unicast — 2000::/3; publicly routable IPv6 addressing.

• Guest access: Controls external users invited into your teams as guests. It is not the primary setting for restricting federated communication by domain.
• Messaging policy: Controls messaging features, such as chat or message editing, rather than which organizations users can communicate with.
• Org-wide Teams settings: Contains broad Teams-wide configuration, but domain-based external communication is configured under External access.

• Penetration test: Tests for exploitable vulnerabilities; it does not provide a broad opinion on whether security controls operate effectively.
• Annual self-assessment: Not independent, so it provides less assurance.
• Allow each client the right to audit: Inefficient because every customer may conduct a separate audit, creating duplicated effort and disruption.

• Document feeder: A scratch, dirt, or debris on the feeder glass or rollers can create a line on every scanned image.
• Pickup rollers: Move paper through the printer; they would not normally create a scanner-only line.
• Corona wire: Affects toner charging and would cause defects on printed output.
• Drum assembly: Also affects printed pages, so faxes and computer print jobs would show the line too.

• The ERSPAN source is the device or interface whose traffic is being copied.
• The ERSPAN destination is the device receiving the encapsulated copy and forwarding it to the traffic analyzer.
• The local monitor session number is locally significant. Therefore, the source and destination do not need matching session IDs such as 47 or 48.
• The erspan-id identifies the ERSPAN stream and must correspond between the source and destination configuration.

• New investment: $536,500
• Resulting NPV: $0

• Domínios personalizados.
• Armazenamento suficiente.
• Instâncias dedicadas.
• Balanceamento de carga.
• Menor custo entre os planos que atendem a tudo.

• Undefined or blank values
• Relationship matching problems
• Duplicate or conflicting keys
• Errors when querying the model

• Normalize all values to upper- or lowercase in the source query or Power Query.
• Add an index or surrogate key when values that differ only by case must remain distinct.

• Install unauthorized or unapproved applications
• Access system areas normally restricted
• Add features unavailable in the default software
• Modify the device’s operating system

• SQL injection (SQLi): Attacks databases by inserting malicious SQL commands.
• Cross-site scripting (XSS): Injects malicious scripts into web pages viewed by users.
• Sideloading: Installs an application from outside the official app store, but it does not necessarily remove the phone’s operating-system restrictions.