Pure Storage FBAP_002 Exam Prep
Pure Storage FlashBlade Certified Architect Professional (FBAP_002) (Page 7 )

• A. Adjust resolution: Incorrect because an incompatible resolution usually causes no display, distortion, or an unsupported-mode message—not intermittent flickering.
• B. Swap the HDMI cable: Correct. Replacing the common, easily tested component is the appropriate troubleshooting step.
• C. Replace the projector: Incorrect because the issue also occurs with a monitor.
• D. Configure refresh rate: A mismatched refresh rate can cause visual problems, but the repeated flicker across displays points more strongly to the cable.

• Data owners: Decide who should have access and approve the access rules.
• Business process owners: May help define business requirements, but normally do not enforce technical permissions.
• Security steering committee: Provides governance and direction; it does not manage individual access rights.
• Security administrators: Apply and enforce the approved access controls.

• A — Securing information assets: This is the responsibility of management and operational/security teams.
• B — Validating protection: Correct. The auditor checks whether controls—such as access restrictions, encryption, retention, and handling procedures—match the asset’s classification.
• C — Ensuring alignment with regulations: Management and legal/compliance functions typically establish classification requirements; the auditor may assess compliance but does not primarily define alignment.
• D — Defining classification levels: This is a management responsibility based on business needs, risk, and regulatory obligations.

• Active-active routers: Provide redundant Internet connections/devices. Both can operate, so traffic can fail over or be load-balanced.
• Active-active firewalls: Avoid a single firewall becoming a failure point while maintaining security inspection.
• Load balancers: Distribute requests across multiple web servers. If one server fails, traffic can go to the other.
• Redundant power supplies: A server with separate power supplies should connect to independent power sources or circuits.
• UPS A and UPS B: Provide backup power and redundancy. Ideally, each power supply is connected to a different UPS.
• SONET ring: A ring topology provides alternate paths if a fiber link or segment fails.

• Power BI dataset — Reuses the existing tables, relationships, and measures. You mainly create new visualizations.
• SharePoint folder — Connects to the source files, but you would need to rebuild the model and measures.
• Power BI dataflows — Primarily provide reusable data preparation; they do not automatically provide the existing report’s measures and model.
• Excel workbook — Requires reconnecting to and modeling the source data again.

• Domain controllers, because the requirement specifically excludes them. However, note that both member servers and domain controllers run Windows Server, so OS targeting alone cannot distinguish them unless the targeting option allows selecting the relevant server role/version. In the usual exam interpretation, target the applicable server OS category.
• Client computers, because they run a client Windows operating system.

• Domain: Targets membership in a domain, not the computer’s operating-system type.
• Security Group: Would require creating and maintaining a group containing all member servers, increasing administrative effort.
• Environment Variable: Not designed to reliably identify member servers.

• Type 1 hypervisor: Runs directly on the physical hardware (“bare metal”).
• Type 2 hypervisor: Runs inside the host OS as an application.

• Bare-metal installation: Type 1
• Local management only: Not a defining characteristic
• Specific hardware requirements: Not the key distinction

• IaaS: You deploy and manage virtual machines, including the operating system and installed software. Azure manages the physical datacenter, hosts, and networking infrastructure.
• PaaS: Azure manages the infrastructure and operating system, while you deploy and manage your application code. Examples include Azure App Service and Azure Functions.

• A user connects with their Google account.
• Google associates the user’s SSH key with that identity.
• IAM roles determine whether they can log in.
• Access can be tied to a specific employee for auditing.
• Removing the IAM role removes their login access.

• compute.osLogin: regular OS login access
• compute.osAdminLogin: OS login with administrative privileges, typically including sudo

text 
enable-oslogin=TRUE

• Vulnerability scanner: Identifies technical weaknesses in systems, applications, or devices.
• Penetration test: Simulates attacks to determine whether vulnerabilities can be exploited.
• SCAP (Security Content Automation Protocol): Uses standardized formats and protocols for automated vulnerability, configuration, and compliance checks.
• Illumination tool: Maps and analyzes broader supply-chain exposure and third-party risk.

• CSIRT: A team that responds to and manages security incidents.
• CVSS: A scoring system for rating the severity of vulnerabilities.
• SOAR: A technology platform for automating and coordinating security operations and incident response.

• Accept terms of use
• Enter a temporary code or credentials
• Provide basic registration information

• Enterprise authentication — Authenticates organizational users, often with centralized identity services; it is not specifically designed for temporary guest access.
• Ad hoc network — A temporary device-to-device network, not an authentication process.
• WPA3 — A wireless security standard. It protects Wi-Fi access but does not provide the web-based temporary access workflow described here.

• User-generated content: precisa ser coletado, filtrado, anonimizado e rotulado.
• Moderation logs: podem conter dados inconsistentes, informações pessoais e decisões que precisam ser revisadas.
• Content moderation guidelines: são regras ou orientações, não dados diretamente utilizáveis para medir o comportamento do modelo.

• Process Builder: Automates actions based on record changes; it does not create interactive user forms.
• Approval Process: Routes records for approval and captures approval decisions.
• Outbound Message: Sends information to an external system; it does not provide a user interface.

text 
ip route vrf Customer1 172.16.1.0 255.255.255.0 172.16.1.1 global 
ip route vrf Customer2 192.168.1.200 255.255.255.255 192.168.1.1 global 
ip route 192.168.1.0 255.255.255.0 Vlan10 
ip route 172.16.1.0 255.255.255.0 Vlan20

• The route in Customer1 VRF provides a path back to the Customer2 subnet, 172.16.1.0/24.
• The route in Customer2 VRF provides a path to the FTP server, 192.168.1.200.
• The keyword global tells the router to resolve the next hop using the global routing table, enabling controlled route leaking between the VRF and global table.
• The global routes identify the VLAN interfaces used to reach each customer network.

• Lower order numbers appear first.
• For example, a variable with order 100 appears before one with order 200.
• The Sequence field is not the control used for catalog variable display order.
• The Default Value sets a value, not placement.
• The Choice field defines selectable options, not the variable’s position.

• miami.weyland.com requires a custom domain, which is not available in the Free tier.
• Two instances require a tier that supports scaling out. Standard supports multiple instances.
• SSL support is available in Standard.
• 12 GB of storage exceeds the storage limit of the Basic tier in the older Azure pricing model used by this question.
• Standard provides sufficient storage and features while being cheaper than higher tiers—though higher tiers are not listed here.

• Free/Shared: insufficient features for custom domains, SSL, and multiple instances.
• Basic: supports some production features, but its storage capacity is insufficient for the required 12 GB.

• Understating expenses and liabilities
• Overstating profit
• Misleading users of the financial information
• Potentially breaching integrity, objectivity, and professional competence and due care

• terraform init is normally required first, especially for a new or changed working directory. It installs providers/modules and configures the backend.
• terraform plan previews the proposed changes.
• terraform apply applies those changes. It also creates a plan internally if you have not supplied a saved plan.

text 
terraform init 
terraform validate       # optional but recommended 
terraform plan 
terraform apply

• Preparing and managing datasets
• Building and training machine-learning models
• Testing and evaluating models
• Deploying models as endpoints for predictions

• Behavioral and anomaly detection
• Threat intelligence integration
• User and entity behavior analytics
• Automated response actions, often through SOAR integration

• Virus signatures: Associated primarily with antivirus or endpoint protection.
• Security agent deployment: Usually an endpoint-management or EDR function.
• Vulnerability scanning: Typically performed by vulnerability-management tools, though a SIEM may integrate their results.

• Marketing users: Dynamic Forms can show all fields.
• Support users: Field visibility rules can display only the Support preference fields on the record page.
• Reporting: Both profiles can still report on all fields because Dynamic Forms controls page visibility, not the underlying field access.

• A — Two record types and page layouts: Page layouts can control field placement and editability, but they are less flexible for conditional field visibility and would not be the best fit here.
• C — Muting permission set: Permission-set muting is used with permission-set groups; it does not conditionally hide fields on a page.
• D — Field-Level Security: FLS would remove field visibility at the security level. If fields are hidden by FLS, users generally cannot report on or access those fields, conflicting with the requirement that both users report on all data.

• A script of cloud CLI commands: IaC because the commands can be saved, reviewed, versioned, and rerun consistently.
• Manually run curl commands: Not necessarily IaC; they are manual actions unless organized into an automated script.
• A sequence of REST requests passed to an API: Could represent automation, but the wording does not explicitly say they are stored and executed as reusable code.
• Commands entered into a cloud console: Manual operation, not IaC.

• The type of change: standard, normal, or emergency
• The risk, impact, and complexity
• The change model being used

• A standard change may be pre-authorized through its change model.
• A normal change may require assessment and approval by an appropriate change authority.
• An emergency change may be authorized by an emergency change authority, often using an expedited process.

• Change authorities are not only needed for emergency changes.
• They are not assigned only when a change is deployed.
• They are not only required for normal changes.

• Prevention costs – costs incurred to stop defects occurring, such as staff training, quality planning and supplier evaluation.
• Appraisal costs – costs of checking whether products meet standards, such as inspection, testing and quality audits.
• Internal failure costs – costs of defects found before delivery to customers, such as scrap, rework and retesting.
• External failure costs – costs of defects found after delivery, such as warranty claims, returns, complaints and product recalls.

• Third-party attestation: Provides independent validation, but is typically periodic and performed by an external party.
• Penetration testing: Simulates attacks to identify exploitable vulnerabilities; it does not primarily track compliance.
• Vulnerability scans: Identify technical weaknesses, but do not provide a detailed review of procedures or compliance activities.

• The ERSPAN source is the device or interface whose traffic is being copied.
• The ERSPAN destination is the device receiving the encapsulated copy and forwarding it to the traffic analyzer.
• The local monitor session number is locally significant. Therefore, the source and destination do not need matching session IDs such as 47 or 48.
• The erspan-id identifies the ERSPAN stream and must correspond between the source and destination configuration.

• BCP (Business Continuity Plan): è più ampio e mira a mantenere le funzioni essenziali dell’organizzazione durante un’interruzione. Il DRP è una componente più specifica del BCP.
• Communication plan: stabilisce come comunicare con dipendenti, cittadini e altre parti interessate, ma non ripristina i sistemi.
• IRP (Incident Response Plan): gestisce la risposta iniziale a un incidente di sicurezza, come un attacco informatico, non principalmente il recupero da un disastro fisico.

• Operating profit is affected because transfer price determines internal sales revenue.
• Return on investment (ROI) is affected because ROI depends partly on operating profit.
• Sales revenue is affected because the division records revenue from transferring its output.
• Cost of components purchased is not affected by the transfer price. These are input costs paid to external suppliers and are based on the supplier’s price.

• CPU: Number of virtual CPUs and, where applicable, CPU reservations.
• Memory: Amount of memory and memory reservations.

• Network interface: Usually configured through the VM or workload networking configuration.
• PCI devices: Specialized hardware and not a standard VM Class resource in this context.
• Storage: Typically selected through storage policies or the VM’s storage configuration.

1. The original app version exists.
2. You create and publish a new version, so there are now two versions.
3. When you restore the previous version, Power Apps does not delete or overwrite the newer version. Instead, it creates another version based on the restored one.

• Original version
• Newly created and published version
• New version created by the restore operation

1. Yes — Microsoft Foundry provides a secure, governed environment for building and managing generative AI applications and agents. It brings together models, data, tools, evaluation, deployment, and monitoring.

1. Yes — Foundry is designed for enterprise workloads and supports scaling AI applications as usage grows. Scalability comes from the underlying Azure services and managed infrastructure.

1. Yes — Foundry can be used in solutions involving image recognition and computer vision. Applications can use vision-capable models and Azure AI vision capabilities for tasks such as image analysis, object detection, and OCR.

• Reconnaissance: Gathering information about the target.
• Weaponization: Creating or combining a malicious payload with a delivery method.
• Delivery: Sending the payload, such as through phishing.
• Exploitation: Triggering a vulnerability or weakness to gain execution or access.

• Due diligence: Investigating and evaluating a third party before entering into or continuing a business relationship.
• Attestation: An independent party provides assurance about an organization’s claims or controls. A SOC 2 examination is an example of an attestation engagement, but the analyst requesting and reviewing the report is performing due diligence.
• Internal audit: Reviews the organization’s own internal controls.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.

• 25 — Traditional SMTP server-to-server mail delivery; often restricted and not the usual client submission port.
• 110 — POP3, used for retrieving email; normally unencrypted.
• 143 — IMAP, used for retrieving and synchronizing email; normally unencrypted.

• Driver node: Coordinates Spark jobs and runs in the compute environment.
• Worker node: Executes tasks and processes data.
• Databricks Filesystem (DBFS): Provides storage access for data used by compute resources.

• Design Studio > Emails ? create an email-template folder
• Design Studio > Landing Pages ? create a landing-page-template folder
• Add the relevant assets to each folder
• Right-click the folder and choose Share Folder
• Select the destination workspaces

• Set credit quotas for an account or individual virtual warehouses.
• Define monitoring intervals.
• Trigger actions when usage reaches thresholds, such as sending notifications or suspending a warehouse.
• Help control unexpected warehouse spending.

• Account Usage: Provides historical usage and billing data; it does not enforce credit limits.
• Warehouse Limit Parameter: Not the Snowflake object used for account-wide credit controls.
• Credit Consumption Tracker: Not a standard Snowflake object.

• Initial Intrusion: The compromised VPN account and stolen phishing credentials describe how the attacker first gained access, but that happened months earlier.
• Persistence: The scheduled tasks and recurring C2 connections show how the attacker maintained and automated continued access.
• Search and Exfiltration: This would involve locating and transferring data. The scenario does not primarily describe data discovery or theft.
• Cleanup: Cleanup involves removing evidence or covering tracks. Obfuscated scripts may make detection harder, but the main behavior here is maintaining access.

• B — Data source settings in Power BI Desktop:

• D — Formula bar in Power Query Editor:

m 
  Excel.Workbook(File.Contents("new path"))

• E — Advanced Editor in Power Query Editor:

• A: Dataset settings in the Power BI service mainly handle credentials and gateway settings, not changing the local file path embedded in the PBIX.
• C: Current File data-load settings control refresh/load behavior, not the source location.

• Identity: User-assigned managed identity

• Authorization: Azure RBAC

• Box 1: No — The rule requires user.department to equal Engineering. Engineer does not match, so User1 is not in AU1. Admin1 cannot reset User1’s password.
• Box 2: No — Admin1’s role is scoped to AU1 and cannot manage users outside that AU.
• Box 3: Yes — Admin2 is a Global Administrator and can reset User3’s password.

• A — Tables
• B — Named file formats
• C — Schemas
• E — Databases

Why these are correct

• Tables: Can be cloned using CREATE TABLE ... CLONE. The clone initially uses zero-copy cloning, so storage is shared until changes are made.
• Named file formats: Can be cloned as database objects, preserving the file-format definition.
• Schemas: A schema and its eligible objects can be cloned.
• Databases: A database and its eligible schemas and objects can be cloned.

Why the others are incorrect

• Shares: A share is an account-level data-sharing object, not a normal cloneable database object.
• Users: Users are security principals and cannot be cloned with CLONE.

• Installing software
• Applying configuration changes
• Calling PowerShell scripts
• Running setup or customization commands

cmd 
powershell.exe -ExecutionPolicy Bypass -File C:\Scripts\ConfigureVM.ps1

• GPO logon script: Runs only when a user logs on and depends on domain/GPO processing.
• GPO startup script: Runs during startup, but requires the VM to be domain joined and receives the applicable GPO.
• Place scripts in a VHD: Merely makes the scripts available; it does not automatically execute them.

• The job keeps 31 days of regular restore points. A backup from the week of January 1 is older than 31 days by March 20, so it is no longer expected to remain on the performance tier.
• It is also a weekly GFS full backup, retained for 14 weeks. Therefore, it is still protected and has not been deleted.
• In a Scale-out Backup Repository, older backups can be moved from the performance tier to the capacity tier—typically object storage—according to the configured offload policy.
• The archive tier is not selected because the question’s configuration does not indicate that the backup has been archived there.

• QuickVisualize is used to create and render a Power BI report from a DataFrame.
• The typical pattern is:

python 
PBI_visualize = QuickVisualize( 
    get_dataset_config(df), 
    auth=device_auth 
) 


PBI_visualize

• get_dataset_config(df) prepares the dataset configuration.
• auth=device_auth supplies authentication for the Power BI connection.
• Evaluating PBI_visualize renders the report in the notebook.

• Box 1: No
• Box 2: Yes
• Box 3: Yes

• Repetitive and time-consuming
• Based on measurable conditions, such as last check-in time
• Easy to automate with alerts, dashboards, or scheduled reports
• Important for ensuring scan coverage

• Assigning custom recommendations usually requires analyst judgment and context.
• Analyzing false positives can sometimes be assisted by automation, but validation often requires human review.
• Rendering an additional executive report increases reporting activity rather than reducing a core operational workload.

• Third-party enterprise application with embedded AI: The provider manages most security controls. The customer mainly manages users, data, and configuration.
• Application using an existing third-party FM: The customer controls the application and its inputs/outputs, but the provider controls the underlying model and infrastructure.
• Fine-tuning a third-party FM: The customer has additional responsibility for training data, data protection, and model behavior, but still depends on the provider’s base model and platform.
• Building and training a model from scratch: The customer controls the model, training data, application, deployment, and many security safeguards. This creates the greatest security ownership.

• Due diligence: Investigating and evaluating a third party before entering a business relationship.
• Attestation: An independent auditor’s examination and formal report—such as the SOC 2 report itself. The analyst is reviewing the attestation, not performing it.
• Internal audit: Examines the organization’s own processes and controls.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.