QlikView QSDA2021 Exam Prep
Qlik Sense Data Architect Certification (Page 5 )

• 25 – Traditional SMTP server-to-server mail transfer; often blocked for client submission and not inherently secure.
• 110 – POP3 for receiving email; unencrypted by default.
• 143 – IMAP for accessing email; unencrypted by default.
• 587 – Authenticated email submission and commonly secured with TLS.

• IRR assumes that interim cash flows can be reinvested at the project’s own IRR. This may be unrealistic, especially when the IRR is very high.
• MIRR assumes reinvestment at a specified rate, usually the company’s cost of capital or another realistic reinvestment rate.

• B: MIRR does not specifically favour projects with long payback periods.
• C: MIRR and IRR can rank competing projects differently.
• D: MIRR is not always higher than IRR; it may be higher or lower depending on the cash flows and reinvestment rate.

• Security controls
• Processes and procedures
• Compliance evidence
• Performance against contractual requirements

• Service-level agreement (SLA): Defines expected service performance, such as uptime and response times.
• Memorandum of agreement (MOA): Documents a general agreement between parties, but does not necessarily provide audit rights.
• Supply chain analysis: Identifies risks across suppliers and dependencies, but is not a contractual mechanism for reviewing vendor controls.

• The load balancer provides the listener’s frontend IP address.
• The active SQL Server node must also respond to that same listener IP.
• Enabling Floating IP allows the listener IP to be preserved and handled correctly by the active replica.
• Without it, SQL connections may be sent to a node that cannot correctly claim the listener address.

• A health probe for the SQL Server port
• A load-balancing rule using the listener port
• Floating IP enabled on that rule

• desktopwidth:i:1280
• desktopheight:i:1024

• Connection information: Controls connection-related settings, not the desktop resolution.
• Scaling plan: Controls when session hosts start, stop, or scale based on demand.
• Session behaviour: Controls behavior such as disconnect or logoff handling.
• Display settings: Specifically controls RDP display properties, making it the appropriate choice.

• Maintain head office control: Transfer pricing generally supports decentralisation rather than direct head-office control.
• Establish centralised decision making: This conflicts with divisional autonomy.
• Develop a top-down culture: Transfer pricing is intended to support empowered divisions and goal congruence, not impose purely top-down management.

• C — Some risks cannot be eliminated.

• D — Accepting residual risk does not imply recklessness.

• E — Most companies in this industry will say something similar.

• Outer packet: 10.5.1.1 > 52.165.16.154
• IPv4 protocol field: 41, which indicates IPv6 encapsulation
• Inner packet: IPv6 traffic between 2001:... addresses

• MAC address spoofing: Changes Layer 2 addressing; it does not explain the IPv6-in-IPv4 structure.
• Steganography: Hides data inside files or media, not visibly in a tunneled protocol.
• Broken encryption: No evidence of encryption being cracked.
• On-path sniffing: Involves intercepting traffic, not sending data to an external host.

• A — Tables
• B — Named file formats
• C — Schemas
• E — Databases

Why these are correct

• Tables: Can be cloned using CREATE TABLE ... CLONE. The clone initially uses zero-copy cloning, so storage is shared until changes are made.
• Named file formats: Can be cloned as database objects, preserving the file-format definition.
• Schemas: A schema and its eligible objects can be cloned.
• Databases: A database and its eligible schemas and objects can be cloned.

Why the others are incorrect

• Shares: A share is an account-level data-sharing object, not a normal cloneable database object.
• Users: Users are security principals and cannot be cloned with CLONE.

• A — Correct: Identify the data required by Salesforce, its dependencies, and how it should be validated. Verification scripts help confirm record counts, relationships, field mappings, and data integrity after migration.
• D — Correct: Use a full sandbox and perform trial migrations using realistic—or appropriately masked—legacy data. This exposes transformation, volume, dependency, and integration issues before production cutover.
• B — Less appropriate: Phased user migration and parallel operation primarily address user adoption and rollout risk, not the technical risks of data migration.
• C — Less appropriate: Although sandbox testing and integration testing are valuable, the option emphasizes test-data generation rather than validating the migration with representative legacy data. “A full sandbox for all systems” may also be impractical.

• Azure Resource Manager (ARM) templates
• Or, in newer Azure terminology, Bicep files

• Owner, Contributor, and Network Contributor provide sufficient management permissions.
• Reader can view Traffic Analytics data but cannot enable or configure it.

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but it is not the primary control for switch-port MAC learning.
• NGFW: Protects at network boundaries but does not directly limit MAC addresses learned on access ports.

• httprint fingerprints Web servers by analyzing their HTTP responses. It can help identify the Web server type and sometimes its version, even when the banner has been modified or hidden.
• Wget is mainly used to download files or Web content.
• WinSSLMiM is associated with SSL man-in-the-middle testing.
• Whisker is an older Web-server vulnerability assessment tool, especially associated with IIS, rather than the expected banner-grabbing tool here.

• Code signing: Verifies the software’s authenticity and integrity; it does not hide the source code or prevent reverse engineering.
• Tokenization: Replaces sensitive data with tokens, mainly for protecting data such as payment information—not software logic.
• Blockchain: Provides a tamper-resistant record of transactions or data; it does not protect compiled code from analysis.

• GPS coordinates
• Date and time the image was taken
• Camera or device model
• Exposure settings

• Log data: Records events or activities, such as system or application activity.
• Encrypted data: Information intentionally encoded to prevent unauthorized access.
• Sensitive data: A broad classification for information requiring protection; geolocation may be sensitive, but the technical type stored in the image is metadata.

• A — VARIANT "null" values are not the same as SQL NULL values: True

• B — Frequent, single-row DMLs: False

• C — Validate data before loading into the target table: True

• D — Use staging tables to manage MERGE statements: True

• SAS (Serial Attached SCSI):

• SSD (solid-state drive):

• A is incorrect: Flow Debugger is for debugging Salesforce Flows, not Trust Layer masking.
• B is incomplete/misleading: Requesting audit data may be part of reviewing the results, but collection and storage must first be enabled.
• C is correct: It describes the initial validation step.

1. Create a temporary Onboarding OU.
2. Move the new account into it.
3. Move the restrictive SCPs from the organization root to the Production OU.
4. Allow the account to update AWS Config.
5. Move the account into Production after onboarding.

• An SCP attached at the organization root applies to every account and OU beneath it.
• An SCP attached to the Production OU applies only to accounts in that OU.
• Therefore, moving the restrictive SCP from the root to Production temporarily exempts the onboarding account without weakening the policies for existing production accounts.
• Once onboarding is complete, moving the account into Production subjects it to the normal restrictions.

• 10 minutes have elapsed, or
• 20 MB of accounting data has accumulated

• Packet loss
• Latency
• Jitter
• Call quality by user, device, network, location, or building

• Teams Usage Report: Shows adoption and usage statistics, not detailed call-quality metrics.
• Teams Device Usage Report: Reports which devices are being used and how, but does not provide detailed packet-loss analysis.
• Microsoft Network Testing Companion: Helps assess network readiness before deployment, but it is not the primary tool for analyzing packet loss from actual Teams calls.

• MTTC: Time required to contain or limit the incident’s impact — best match.
• MTTR: Time required to remediate or recover from the incident; this may include eradication, restoration, and cleanup, which goes beyond merely stopping spread.
• MTTD: How long it takes to discover the incident.
• MTBF: Average time between failures, generally a reliability metric.

• Record changes — a flow can start when a record is updated or otherwise changes.
• Schedules — a flow can run at a specified date/time or on a schedule.
• Record inserts — a flow can start when a new record is created.

• Subflows are reusable flow components called by another flow; they are not normally trigger types.
• Record views do not generally initiate a Flow Designer flow.

• An active relationship is used automatically when filters are evaluated. An inactive relationship does not propagate filters unless explicitly activated in DAX, so it would not reliably enforce the required security behavior.
• Apply security filter in both directions allows RLS filters to propagate across the relationship in both directions. This ensures that bidirectional filtering respects the RLS rules applied to both tables.
• Assume referential integrity is unrelated to RLS. It is mainly a DirectQuery optimization that allows Power BI to use an inner join when matching keys are guaranteed to exist.
• The relationship must therefore be active, with security filtering enabled in both directions.

• Penetration test: Tests for exploitable vulnerabilities; it does not provide a broad opinion on whether security controls operate effectively.
• Annual self-assessment: Not independent, so it provides less assurance.
• Allow each client the right to audit: Inefficient because every customer may conduct a separate audit, creating duplicated effort and disruption.

• Lower order numbers appear first.
• For example, a variable with order 100 appears before one with order 200.
• The Sequence field is not the control used for catalog variable display order.
• The Default Value sets a value, not placement.
• The Choice field defines selectable options, not the variable’s position.

• Managerial: policies, standards, risk management, governance
• Operational: procedures carried out by people, such as training, incident response, and backups
• Technical: firewalls, encryption, access-control systems
• Physical: locks, guards, cameras

• Reconnaissance: Gathering information about the target.
• Weaponization: Creating or combining a malicious payload with a delivery method.
• Delivery: Sending the payload, such as through phishing.
• Exploitation: Triggering a vulnerability or weakness to gain execution or access.

• STP elects the switch with the lowest Bridge ID as the root bridge.
• The Bridge ID consists mainly of bridge priority + MAC address.
• If multiple switches have the same priority, the switch with the lower MAC address is preferred.
• STP bridge priority values are configured in increments of 4096, such as 0, 4096, 8192, and so on. 32768 is the standard default value.

• The Azure DevOps (Boards only) connector is designed specifically for Azure DevOps Analytics views.
• It authenticates directly to Azure DevOps and lets you select an existing Analytics view.
• Filters defined in the Analytics view are applied by Azure DevOps before Power BI retrieves the data, reducing the amount of data transferred.

• Azure DevOps Server (Boards only) is for on-premises Azure DevOps Server.
• OData Feed can consume OData endpoints, but it is not the dedicated Azure DevOps Analytics-view connector.
• OData queries are not the intended dedicated connector for this requirement.

• Controlar o fluxo de dados entre S3 e SageMaker;
• Aplicar regras de segurança por meio da VPC;
• Reduzir a exposição dos dados;
• Permitir acesso privado ao bucket do S3.

• Amazon Inspector: avalia vulnerabilidades, mas não gerencia o fluxo de dados.
• Amazon Macie: ajuda a descobrir e proteger dados sensíveis no S3, mas não cria a conexão com o SageMaker.
• S3 Glacier Deep Archive: é uma classe de armazenamento para arquivamento, não uma solução de conectividade.

1. insert con; ? 1
2. Database.setSavepoint(); ? 2
3. update con; ? 3
4. Database.rollback(sp_admin); ? 4

• C. Case after-insert trigger that publishes a Platform Event

• D. Custom Apex controller that publishes a Platform Event

• A. Trigger with a callout: Salesforce triggers should not make direct synchronous callouts, and this tightly couples transaction processing to the external system.
• B. Workflow Rule with Outbound Message: This can react to record changes, but it cannot reliably capture a user clicking a menu item. It also does not provide the same flexible event-driven model as Platform Events.

• Proxy server: Acts as an intermediary for requests, but does not necessarily provide an encrypted connection to the corporate network.
• NGFW: A firewall with advanced inspection and filtering capabilities; it may support VPNs but is not the remote-access solution itself.
• Security zone: A logical network grouping based on trust or security requirements, not a method for remote access.

• Virus signatures: Primarily associated with antivirus or antimalware tools.
• Security agent deployment: Usually handled by endpoint-management or endpoint-security platforms.
• Vulnerability scanning: Performed by vulnerability-assessment tools, although a SIEM may ingest their results.

• Deploy five individual VMs: This does not create a VM scale set.
• Modify Availability Zones or Size settings: These actions do not create the required scale set and add unnecessary steps.
• VM orchestration mode: This is Flexible orchestration, intended for more individually managed VMs and mixed configurations. It is not the best choice for a straightforward group of identical instances.

• The vulnerability scan identifies a vulnerability.
• The administrator verifies that the vulnerability is not present.
• Therefore, the scan produced a false positive.

• True positive: A vulnerability is reported and genuinely exists.
• False negative: A vulnerability exists, but the scan fails to detect it.
• True negative: No vulnerability exists, and the scan correctly reports no issue.

• Amazon EC2 instances — ???????? ?? ?? ??????? CPU, memory ??? instance size ???????? ???????
• AWS Lambda functions — memory configuration ?????????? ???????
• Amazon EBS volumes — volume type ?? size optimize ???? ???????
• ??????? ECS workloads — resource configuration ? cost optimization-?? ???????

• Memory ? compute usage ?????????? ???? custom code ????? ???? development ? maintenance ??????
• Cost allocation tags ???? ????? ??? ?????? ???? ??????? ???; inefficient resource ??????? ?? recommendation ???? ???
• CloudTrail resource ???? ?? API activity ??????, resource utilization ????

• IaaS: You deploy and manage virtual machines, including the operating system and installed software. Azure manages the physical datacenter, hosts, and networking infrastructure.
• PaaS: Azure manages the infrastructure and operating system, while you deploy and manage your application code. Examples include Azure App Service and Azure Functions.

• Labels control access and protection, not blanket exclusion.
• If the user has permission to open a labeled file—especially if the label allows authenticated users to view it—Copilot can use that file in a summary.
• If the label applies encryption and the user lacks the required usage rights, Copilot should not use the file or reveal its contents.
• Copilot honors the user’s existing permissions, so it should not expose labeled content to an unauthorized user.

• Accept: Acknowledge the risk and take no additional action.
• Transfer: Shift the risk or financial impact to another party, such as through insurance or a contract.
• Mitigate: Reduce the likelihood or impact using controls, such as firewalls, training, or backups.
• Avoid: Eliminate the activity that creates the risk.

• Key-based authentication: Provides an endpoint secured with API keys.
• Real-time REST access: Supports online inference through an HTTP/REST endpoint.
• No VM vCPU quota consumption: Microsoft hosts and manages the underlying infrastructure, so your subscription’s VM quota isn’t used.

• Batch: Intended for asynchronous, large-volume processing rather than real-time requests.
• Self-hosted container: You manage the infrastructure and typically need compute resources and quota.
• Standard: This is not the clearest deployment type for the stated requirements; the specific Foundry option is serverless API.

• Sales process: Controls which Opportunity Stage values are available.
• Record type: Associates the appropriate sales process with a business scenario and controls available picklist values.
• Page layout: Controls which fields are displayed and whether they are required or read-only.

• Energy Market Team 1 ? Record Type 1, Sales Process 1, Page Layout 1
• Energy Market Team 2 ? Record Type 2, Sales Process 2, Page Layout 2
• Services/Installation Team ? Record Type 3, Sales Process 3, Page Layout 3

• Initial Intrusion: The compromised VPN account and stolen phishing credentials describe how the attacker first gained access, but that happened months earlier.
• Persistence: The scheduled tasks and recurring C2 connections show how the attacker maintained and automated continued access.
• Search and Exfiltration: This would involve locating and transferring data. The scenario does not primarily describe data discovery or theft.
• Cleanup: Cleanup involves removing evidence or covering tracks. Obfuscated scripts may make detection harder, but the main behavior here is maintaining access.

• Azure Resource Manager (ARM) templates define the virtual machines and related Azure resources declaratively. You can deploy the same template repeatedly, ensuring consistent VM sizes, networking, storage, extensions, and other infrastructure settings.

• PowerShell DSC extension applies and maintains the required Windows configuration inside each VM. DSC is state-based: if a setting changes or becomes incorrect, DSC can bring it back to the desired configuration.

• Azure Pipelines deployment groups organize deployment targets, but they do not primarily enforce ongoing VM configuration.
• Custom Script Extension runs setup scripts, but it is generally less maintainable and does not continuously enforce configuration like DSC.
• Pipeline stage templates reuse pipeline workflow definitions; they do not configure the VMs themselves.

• Report on the discount approval time for quotes

• Dashboard of opportunity stage duration

• Lead conversion trends measure lead-generation effectiveness, not opportunity closing time.
• Campaign ROI evaluates marketing performance, not delays in the sales process.

• Firewall
• Intrusion prevention and detection
• Antivirus or antimalware
• Web and email filtering
• Virtual private networking (VPN)
• Sometimes content filtering and centralized reporting

• Admin access to the deployment pipeline
• Contributor access to the Development and Test workspaces
• Viewer access to the Production workspace

1. The specific table — for example, incident
2. The parent table — for example, task
3. The wildcard table — *, which applies broadly