CompTIA
Checkpoint
ISC
HP
Dell
EC-Council
EXIN
Fortinet
ITIL®
Juniper
PMI
Microsoft
VMware
Avaya
Google
Salesforce
Amazon
Palo Alto Networks
Certiport
ISC2
All Vendors
  2. Home
  3. Exams
  4. RedHat
  5. EX200

Free EX200 Exam Braindumps (page: 14)

Page 13 of 35
PDF with 136 Questions

SIMULATION
Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.

  1. See Explanation section for answer.

Answer(s): A

Explanation:

Use fdisk /dev/hda ->To create new partition.
Type n-> For New partition
It will ask for Logical or Primary Partitions. Press l for logical.
It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
Type the Size: +100M ->You can Specify either Last cylinder of Size here.
Press P to verify the partitions lists and remember the partitions name. Default System ID is 83 that means Linux Native.
Type t to change the System ID of partition.
Type Partition Number
Type 82 that means Linux Swap.
Press w to write on partitions table.
Either Reboot or use partprobe command.
mkswap /dev/hda? ->To create Swap File system on partition.
swapon /dev/hda? ->To enable the Swap space from partition.
free -m ->Verify Either Swap is enabled or not.
vi /etc/fstab/dev/hda? swap swap defaults 0 0
Reboot the System and verify that swap is automatically enabled or not.



SIMULATION
There are two different networks 192.168.0.0/24 and 192.168.1.0/24. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on Server. Verify your network settings by pinging 192.168.1.0/24 Network's Host.

  1. See Explanation section for answer.

Answer(s): A

Explanation:

vi /etc/sysconfing/network NETWORKING=yes HOSTNAME=station?.example.com GATEWAY=192.168.0.254 service network restart
2.vi /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR=X.X.X.X
NETMASK=X.X.X.X
GATEWAY=192.168.0.254
ifdown eth0
ifup eth0



SIMULATION
One Logical Volume is created named as myvol under vo volume group and is mounted. The Initial Size of that Logical Volume is 400MB. Make successfully that the size of Logical Volume 200MB without losing any data.
The size of logical volume 200MB to 210MB will be acceptable.

  1. See Explanation section for answer.

Answer(s): A

Explanation:

First check the size of Logical Volume: lvdisplay /dev/vo/myvol
Make sure that the filesystem is in a consistent state before reducing:
# fsck -f /dev/vo/myvol
Now reduce the filesystem by 200MB.
# resize2fs /dev/vo/myvol 200M

It is now possible to reduce the logical volume. #lvreduce /dev/vo/myvol -L 200M
Verify the Size of Logical Volume: lvdisplay /dev/vo/myvol
Verify that the size comes in online or not: df -h



SIMULATION
One Logical Volume named /dev/test0/testvolume1 is created. The initial Size of that disk is 100MB now you required more 200MB. Increase the size of Logical Volume, size should be increase on online.

  1. See Explanation section for answer.

Answer(s): A

Explanation:

lvextend -L+200M /dev/test0/testvolume1 Use lvdisplay /dev/test0/testvolume1)
ext2online -d /dev/test0/testvolume1
lvextend command is used the increase the size of Logical Volume. Other command lvresize command also here to resize. And to bring increased size on online we use the ext2online command.






Post your Comments and Discuss RedHat EX200 exam with other Community members: