Salesforce 201 COMMERCIAL BANKING FUNCTIONAL Exam Actual Questions
SalesforcenCino 201 Commercial Banking Functional Exam (Page 16 )

• Phishing can map to two MITRE ATT&CK tactics depending on the attacker’s objective.

• Therefore, phishing isn’t confined to a single tactic; it can serve both Reconnaissance and Initial Access, which is why option D (Reconnaissance, Initial Access) is correct.

• Actual filename: Document.xml.txt
• Explorer displays: Document.xml
• File type: Text Document (.txt)

text 
Document.txt ? Document.xml

• The correct AAA mapping (per Cisco objectives) is:

• Why the given options aren’t fully correct:

• Quick takeaway: when you configure AAA, you should conceptually map them as:

• Example commands (to reinforce concepts):

• On-prem you generalize and capture the VM as a VHD.
• Upload the VHD to Azure with Add-AzVhd.
• Register the VHD as an image in Azure with Add-AzImage (or New-AzImage) so it appears as a selectable image.
• Create new VMs from that image (e.g., with New-AzVM -Image ...).

• Used for communication on the local link or LAN segment
• Automatically generated on IPv6-enabled interfaces
• Not routed by routers to other networks
• Commonly used by devices to communicate with their local IPv6 router
• Begins with FE80 through FEBF

• FC00::/7 — unique local unicast
• FE80::/10 — link-local unicast
• FF00::/8 — multicast
• 2000::/3 — global unicast

• Answer: D) Out-of-band management

• Why this is correct:

• Why the other options aren’t suitable here:

• Windows 10 VMs
• Windows Server 2012 or later VMs
• Running VMs—they do not need to be shut down
• Debian 8.2+ VMs, assuming the specific version is supported
• Stopped or deallocated VMs

• A. Flash the BIOS: Not the first move. A BIOS update can be risky when POST is failing. It’s better to first rule out simpler causes (like RAM seating). BIOS flashing is usually done if the CPU isn’t supported by the current BIOS, which you’d check after RAM seating.

• B. Check the CMOS battery: Possible but unlikely the immediate cause. CMOS battery issues would more likely cause BIOS settings to reset or clock problems. RAM seating is a more common, direct fix after a motherboard swap.

• D. Reinstall the old motherboard: Not a troubleshooting step for the new system. The goal is to get the new motherboard to POST, not revert to old hardware.

• C. Reseat the RAM: Correct because memory seating problems are the most common cause of POST failures after a motherboard swap. Re-seating ensures proper contact in the new board’s slots.

• Drop violating frames
• Log or alert on the violation
• Shut down or restrict the port

• Load balancer: Distributes application traffic; it does not control switch MAC learning.
• IPS: May detect some network attacks but is not the primary control for switch MAC-table exhaustion.
• NGFW: Protects traffic crossing network boundaries, while MAC flooding occurs at the switching/LAN layer.

• State is stored remotely in Terraform Cloud/Enterprise, not as a local file.
• Terraform runs (plan/apply) can be executed on remote infrastructure, with results visible in the remote workspace UI.
• Supports workspace-based organization, state locking, and concurrency control.
• Useful for team collaboration, centralized governance, and auditable logs.

• In your configuration, you use a backend block like backend "remote" { ... }.
• You still run terraform init to configure/migrate to the remote backend.
• After setup, terraform plan/terraform apply may be executed remotely, and the outputs/logs appear in the Terraform Cloud/Enterprise UI rather than (only) in your local terminal.

• Other backends store state remotely but typically do not provide remote execution; with the remote backend you get remote runs and a collaborative UI, not just remote state storage.

• A. Implement retries with exponential backoff

• C. Reduce the frequency and/or size of requests

• B. Use PutRecord instead of PutRecords — PutRecord sends one record per call and does not remove the underlying throughput limitation. It may increase request overhead.
• D. Use Amazon SNS instead — SNS is not a direct fix for Kinesis shard throttling and changes the required streaming architecture.
• E. Reduce KCL consumers — KCL consumers read from Kinesis; they do not solve producer-side PutRecords throttling.

• Answer:

• Why:

• Why the other centers aren’t the right fit here:

• Answer: Data enhancement.

• Why: Augmenting gold-layer tables with an additional dataset is enriching or enhancing the existing data to support the ad-hoc analysis. The other options don’t capture the idea of adding external data to improve the dataset (ad-hoc improvements = tweaks, last-mile dashboarding = building dashboards, last-mile ETL = ETL steps at the end of the pipeline). In practice, this is often also called data enrichment.

• A) configure matching hold and delay timers

• B) configure matching key-strings

• C) configure matching priority values

• D) configure unique virtual IP addresses

• DNS????????????????

• ???????????

• ????????????????

• Correct options: C and D.

• The AWS Cloud Adoption Framework (CAF) security perspective focuses on capabilities to protect information and manage security risk.
• Observability (A) is primarily an operations/monitoring capability, not a core security capability under CAF.
• Incident and problem management (B) is IT service management/operations, not specifically a CAF security capability.
• Incident response (C) is a security-focused capability: detecting, containing, and recovering from security incidents.
• Infrastructure protection (D) involves applying security controls to protect the underlying infrastructure, which fits the security perspective.

• Wiping securely overwrites the drive so the original data cannot reasonably be recovered. It is generally less expensive than physically destroying the device.
• Recycling could expose the data if the drive is not securely erased first.
• Shredding physically destroys the drive and is effective, but usually more costly and prevents reuse.
• Deletion only removes file references; it is not a secure sanitization method.

• Premium file shares: contoso104 only
• Blob access tiers: contoso101, contoso102, and contoso103

• Premium Azure Files shares require a storage account with the FileStorage account kind. This is a specialized account type and is not used for blob storage.
• Blob access tiers such as Hot, Cool, and—where supported—Archive apply to blob-capable accounts, such as General-purpose v2 or BlobStorage accounts shown in the exhibit.
• contoso104 is therefore excluded from the blob-tier selection because it is the premium Files account.

• The correct answer is D: All of the above.

• Snowflake Web Interface (UI): You can create and manage Virtual Warehouses from the UI (resize, suspend/resume settings, etc.).
• SQL commands: You can create and alter warehouses with DDL like CREATE WAREHOUSE and ALTER WAREHOUSE.
• Data integration tools: ETL/ELT tools can create/manage warehouses by connecting to Snowflake and issuing the appropriate commands or using their config to specify a warehouse.

• Port 515: LPD/LPR line-printer service
• Port 631: IPP — Internet Printing Protocol
• Port 9100: JetDirect/RAW printing, commonly used by network printers

• Linux machine: Linux could run these services, but the three printer-specific ports strongly indicate a printer.
• Router: Routers may use Telnet and HTTP, but normally would not expose ports 515, 631, and 9100 together.
• Windows machine: Windows can share printers, but this particular service combination is more characteristic of a network printer’s embedded operating system.

• Pull: Downloads changes from the central repository and updates the local repository.
• Push: Sends local commits to the central repository.
• Commit: Records local changes in the repository’s history.
• Merge: Combines changes from different branches.
• Clone: Creates a new local copy of a repository.

• Approval publish: Request approval from a manager of the knowledge base before moving the article into the publish state.
• Instant Publish: Immediately publishes a draft article without requiring an approval.
• Instant Retire: Immediately retires a published article without requiring an approval.
• Retire Knowledge: Moves a knowledge article to the retired state.

• These are the base knowledge workflows that control how articles move between states (Draft, Published, Retired) and whether approvals are required.
• The other options describe different lifecycle actions, but these four cover the standard publish/retire workflows in ServiceNow.

• The app on EC2 connects to Aurora using DB credentials stored on the instance. Secrets Manager centralizes these credentials and can rotate them automatically, eliminating manual updates on each EC2 host.
• Automatic rotation reduces operational overhead and enhances security because credentials are rotated on a schedule without code changes.
• The app can retrieve the current secret at runtime (e.g., via the AWS SDK) and use it to authenticate to Aurora, avoiding reliance on locally stored files.

• B (Parameter Store) can store secrets but lacks seamless built-in rotation for database credentials like Secrets Manager; rotation often requires more custom work.
• C (S3) would require complex tooling to rotate and securely fetch credentials and still risks exposure if access policies aren’t perfect.
• D (Encrypted EBS volumes) would store credentials locally on each instance and does not automate rotation or centralized management.

• Correct choices: A and D.

• Why not B, C, or E?

• cloud applications only
• all Web traffic including cloud applications

• Cloud applications only: Only traffic to cloud apps is steered to Netskope for inspection/enforcement; other traffic bypasses.
• All Web traffic including cloud applications: All web-bound traffic, including cloud app traffic, is steered to Netskope.

• Browser isolation, Web traffic only, or a vague “traffic only” option are not the standard two steering modes.
• These two configurations let you decide what traffic Netskope analyzes in real time and what is bypassed.

• The “Answer(s)” field lists B and C (likely incorrect). The explanatory text correctly describes cloud applications only and all Web traffic including cloud applications as the two configurations.

• Ablauf: Er wird in der gleichen Transaktion ausgeführt, bei der z. B. ein Datensatz erstellt oder aktualisiert wird. Der Benutzer wartet, bis der Workflow abgeschlossen ist.
• Stufen: Kann vor dem Vorgang (pre-operation) oder nach dem Vorgang (post-operation) laufen.
• Zweck: Sofortige Validierung oder Anpassung von Daten, ggf. auch das Verhindern eines Vorgangs, wenn Bedingungen nicht erfüllt sind.

• Automatisierte Flows (Power Automate, automatisierte/ Background Flows) laufen asynchron im Hintergrund, nachdem der Trigger erkannt wurde, und blockieren den Benutzer nicht.

• Correct answer: A) Hashing

• Why: Hashing produces a fixed-size digest of the software. If the final build is altered in any way, the hash will change, enabling you to detect tampering by comparing the stored digest with a freshly computed one.

• Why not the others:

• The stage has a default file format defined (e.g., when you create the stage with FILE_FORMAT = (...)), and Snowflake will use that default.

• You use a named file format attached to the stage, or you specify an inline format in the COPY command, e.g., COPY INTO my_table FROM @my_stage FILE_FORMAT = (TYPE = 'CSV');

• Use a stage default: omit FILE_FORMAT in COPY.
• Or rely on a named/inline format: specify FILE_FORMAT in COPY or set a format on the stage.

• Control plane: Managed by Databricks and contains the Databricks web application, workspace services, cluster management, and job orchestration.
• Data plane: Runs in your cloud account and contains compute resources such as:

• Worker node: Data plane compute.
• Driver node: Data plane compute.
• JDBC data source: Usually an external data system.
• Databricks Filesystem (DBFS): Provides storage access and is backed by cloud object storage rather than being entirely part of the control plane.

• Sustainability is not a CAF perspective (it's not one of the CAF perspectives).
• Performance efficiency and Reliability are pillars of the AWS Well-Architected Framework, not CAF.

• Source: on-premises SQL Server Database1
• Destination: Fabric Warehouse Warehouse1
• Connectivity: on-premises data gateway

• Dataflow Gen1: Primarily for Power Query transformations and isn’t the best Fabric-native choice for this copy operation.
• KQL queryset: Queries data; it does not orchestrate copying from SQL Server.
• Notebook: Could perform custom code-based movement, but it is unnecessary and less direct than a pipeline.

• SageMaker endpoint: Not required because the model is being used through Amazon Bedrock.
• SageMaker Model Registry: Used for managing SageMaker models, not for making a Bedrock custom model available.
• Grant access in Amazon Bedrock: IAM permissions may still be needed, but granting access alone does not provide the required inference capacity.

• A) You can only apply a single template BOM to a service object.

• C) You can modify or delete lines in a BOM template regardless of whether the template has been associated to a service object, or not.

• B) You can apply many template BOMs to a service object — false; typically only one template per service object.
• D) You can modify/delete lines only if not associated — false; you can modify templates even after association (per C).

• Assign users or their team an appropriate security role.
• Ensure the role has the required table privileges, such as read, create, write, and append.
• Share the app with that security role in the app designer.

• Dynamics administration center: Used for environment and service administration, not routine app access configuration.
• Manage Roles: Not the specific Dataverse area used to define app and data permissions.
• Security Roles: Define what users can access and which operations they can perform.

• Amazon S3 — Object storage, not a database.
• Amazon DynamoDB — Fully managed NoSQL key-value and document database.
• Amazon Redshift — Managed data warehouse designed for analytics, not primarily transactional MySQL workloads.

• VMs without NGT: Not clearly a migration blocker on its own; NGT (Nutanix Guest Tools) status isn’t the typical gating factor for live migration during maintenance.
• VMs marked as an Agent: Not a standard, widely-known migration blocker; agents aren’t the typical reason a VM can’t be migrated.
• Memory Overcommitted VMs: While memory pressure can affect placement, memory overcommitment isn’t a fundamental reason a VM would be labeled non-migratable during maintenance.
• VMs with attached Volume Groups: This is the strongest candidate. A Volume Group is a set of volumes bound to a VM; moving the VM would entail relocating and reattaching those volumes, which can complicate or block live migration during maintenance.

• The correct setting to configure is the Enrollment Status Page (ESP) profile.
• Why: ESP tracks the enrollment progress and logs during Autopilot provisioning. You can enable log collection within the ESP policy so that, if ESP times out, the user can collect and share the logs with support.
• Optional enhancement: In the ESP policy (or the Autopilot diagnostics settings), you can enable:

• Automatic enrollment settings: control how devices auto-enroll, not log collection.
• Windows Autopilot deployment profile: controls deployment steps but not ESP log collection.
• Device configuration profile: applies settings but doesn’t provide ESP log collection mechanics.

• Batch processing, such as scheduled data transformations
• Streaming processing, such as continuously ingesting events

• Manipulating data with multiple languages: Mainly a benefit of Databricks and Spark.
• Real-time notebook collaboration: A workspace/notebook feature.
• Alerts for query failures: A Databricks SQL or job-monitoring feature.
• Distributing complex operations: Primarily a Spark compute capability.

• Domeny tworza restrykcjony razem z typem. Wykorzystujesz je w kolumnach, aby miec spójna walidacje danych w wielu miejscach.
• To nie jest pelny niestandardowy typ z wlasnym input/output funkcjonowaniem. Aby stworzyc typ z wlasnym I/O i operacjami, uzylbys CREATE TYPE (lub rozszerzen w C). Domeny to uproszczona forma ograniczen na istniejacy typ.

• CREATE DOMAIN positive_int AS integer NOT NULL CHECK (VALUE > 0);
• CREATE TABLE orders (id serial, qty positive_int);

• latwo wymuszaja wspólne reguly dla wielu kolumn/naglówków,
• zmiana regul w jednym miejscu (domena) automatycznie wplywa na wszystkie kolumny ja uzywajace.

• Correct answer: enable SLAAC on an interface (C)

• Why the other options are not correct:

• Mapping:

• Why:

• Quick note: If you were to host a website on a VM, it would be IaaS; if you used a platform service instead of a VM, it would be PaaS. CaaS (containers) isn’t shown here.

kusto 
Event | where EventType == "error"

• == is the KQL equality operator.
• -eq is a PowerShell operator, not KQL.
• is is not the correct equality operator in this context.

text 
Event | where EventType –eq "error"

• Event | search "error" — valid, broad search.
• search in (Event) "error" — valid, broad search.
• Event | where EventType == "error" — valid, targeted filter.

• Short answer: The correct term is Anti-forensics (option D), not “Felony.”

• Why: The actions described—hiding files in slack space, changing file headers, placing suspicious files in executables, and altering metadata—are classic anti-forensics techniques. They’re used to hinder or obscure forensic analysis, not to label the act as a legal category.

• About the options:

• Note: The provided answer key lists B (Felony), which is misleading for this exam objective. The exam typically tests knowledge of forensics concepts, where anti-forensics is the correct category.

• What the scenario asks: You have a Power BI semantic model that pulls from multiple sources (Azure SQL Database and SharePoint Online), must support a single dataset for three reports, keep data current (daily refresh by 7 AM PT), and apply RLS to limit sales data by region. You need to choose a storage mode for the tables.

• Correct choice: Dual storage mode.

• Why Dual fits:

• Key concepts:

• B: Intégrez des résultats de due diligence tels que les évaluations de risque client.

• C: Utilisez des correspondants en aval pour enquêter et signaler les activités suspectes.

• Failed login attempts
• The account being targeted
• The source user or system
• Time and frequency of attempts

• Two-factor authentication: Helps prevent unauthorized access, but does not primarily detect the employee’s attempts.
• Firewall: Controls network traffic; it generally does not monitor individual login attempts.
• Intrusion prevention system (IPS): Can detect certain network attacks, but this scenario is best addressed through authentication and audit logging.

Simple explanation

• The Azure VPN gateway to connect to
• Authentication settings
• Routes for networks that the client can access

• Help the team identify the causes of delays.
• Encourage continuous improvement through retrospectives.
• Support the team in changing its process, tools, or collaboration methods.
• Help remove impediments that the team cannot resolve independently.

• A: An impediment log may help, but simply maintaining it does not ensure the impediments are resolved.
• B: Directing the team to solutions conflicts with agile self-management.
• C: Adding impediments to the product backlog could delay their resolution and treats them like product features.

• IPv6 address types you’ll typically see:

• Unique Local Addresses (ULAs)

• If an address begins with fdXX:… or fc00:…, place it under “Unique Local Address” (ULA).
• If it begins with 2000::/3, place it under “Global Unicast.”
• If it begins with fe80::, place it under “Link-local.”
• If it begins with ff00::, place it under “Multicast.”

• A. Extranet
• B. VLAN
• C. Intranet
• D. VPN