Salesforce Analytics-Arch-201 Exam Prep
Salesforce Certified Tableau Architect (Page 3 )

• Espionage: Stealing information for intelligence or competitive purposes.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: An attack sponsored or conducted by a government.
• Shadow IT: Unapproved technology or methods used to access organizational resources.

• Insert is used when you are creating a new record. It saves the record to the table and then leaves the form.
• Update is used when editing an existing record. It saves the modifications and then leaves the form.

• User2 is in Group1, so CA2 applies.
• CA2 targets Office 365.
• CA2 requires MFA OR an app protection policy.
• User2 has no app protection policy, but if User2 successfully completes MFA, the OR condition is satisfied.
• The device being noncompliant does not matter because CA2 does not require device compliance.
• CA1 applies only to Global Administrators. Unless User2 is also a Global Administrator, CA1 does not apply.

• A is incorrect: Flow Debugger is for debugging Salesforce Flows, not Trust Layer masking.
• B is incomplete/misleading: Requesting audit data may be part of reviewing the results, but collection and storage must first be enabled.
• C is correct: It describes the initial validation step.

• Endpoint Manager: manages hosts and sensor-related settings.
• Falcon Investigator: supports investigation and analysis, but does not necessarily grant RTR access.
• Remediation Manager: handles remediation-related actions rather than interactive host access.

• Domínios personalizados.
• Armazenamento suficiente.
• Instâncias dedicadas.
• Balanceamento de carga.
• Menor custo entre os planos que atendem a tudo.

• Each Case must follow defined support steps.
• Each step must be completed within a specified time limit.

• Case Escalation Rules: Escalate Cases based mainly on age or criteria; they do not model a complete sequence of service steps.
• Process Builder with Scheduled Actions: Can automate time-based actions but is not the standard framework for Case service-level commitments.
• Omni-Channel Routing: Routes work to agents based on capacity and priority; it does not track Case lifecycle deadlines.

• A — Securing information assets: This is the responsibility of management and operational/security teams.
• B — Validating protection: Correct. The auditor checks whether controls—such as access restrictions, encryption, retention, and handling procedures—match the asset’s classification.
• C — Ensuring alignment with regulations: Management and legal/compliance functions typically establish classification requirements; the auditor may assess compliance but does not primarily define alignment.
• D — Defining classification levels: This is a management responsibility based on business needs, risk, and regulatory obligations.

• Packet capture: Collects and analyzes network traffic; it does not describe the scan type.
• Privilege escalation: Attempts to gain higher permissions after obtaining access.
• System enumeration: Identifies systems, services, or resources, but is not specifically defined by the lack of credentials.
• Passive scan: Observes traffic without actively probing systems. A vulnerability scan is generally an active assessment.

• Future costs — Only costs occurring in the future can be affected by the investment decision. Past costs are sunk and irrelevant.
• Incremental costs — These are additional costs caused by choosing the investment. They are relevant because they differ between alternatives.
• Cash flows — Capital investment decisions are based on future cash inflows and outflows, usually discounted to present value.

• Committed costs have already been agreed or incurred and generally cannot be changed by the decision.
• Unavoidable costs will arise regardless of which option is selected, so they do not affect the choice.

1. Create a temporary Onboarding OU.
2. Move the new account into it.
3. Move the restrictive SCPs from the organization root to the Production OU.
4. Allow the account to update AWS Config.
5. Move the account into Production after onboarding.

• An SCP attached at the organization root applies to every account and OU beneath it.
• An SCP attached to the Production OU applies only to accounts in that OU.
• Therefore, moving the restrictive SCP from the root to Production temporarily exempts the onboarding account without weakening the policies for existing production accounts.
• Once onboarding is complete, moving the account into Production subjects it to the normal restrictions.

• Penetration test: Tests for exploitable vulnerabilities; it does not provide a broad opinion on whether security controls operate effectively.
• Annual self-assessment: Not independent, so it provides less assurance.
• Allow each client the right to audit: Inefficient because every customer may conduct a separate audit, creating duplicated effort and disruption.

Why A is the best fit

Why the other options are weaker

• B — Create alerts in Dynamics 365 Finance: Alerts notify users about changes; they do not calculate tax.
• C — Implement the Common Data Model: CDM standardizes data structures but does not provide tax-calculation logic.
• D — Run a Power BI report: Power BI is primarily for analysis and reporting. A report might display tax rates, but it would not normally calculate and apply tax to sales orders operationally.
• E — Write scripts and code: This could work, but it is less aligned with the requirement for a quick, cost-effective implementation because custom development requires more time and maintenance.

• Data owners: Decide who should have access and approve the access rules.
• Business process owners: May help define business requirements, but normally do not enforce technical permissions.
• Security steering committee: Provides governance and direction; it does not manage individual access rights.
• Security administrators: Apply and enforce the approved access controls.

Correct reasoning

• Create storage5 as a General-purpose v2 (StorageV2) account.
• Configure Blob object replication from storage5 to an existing compatible storage account.
• The destination must support object replication—typically another StorageV2 or premium block blob account.
• Blob versioning must be enabled on both accounts.
• Blob change feed must be enabled on the source account.
• The accounts must meet Azure’s object-replication requirements, including being in supported regions and having compatible configuration.

• Confirming the data has the required columns and data types
• Handling missing or duplicate records
• Converting data into a suitable format
• Selecting or engineering useful features
• Splitting it into training, validation, and test sets

1. Prepare the training data
2. Select an algorithm or configure AutoML
3. Train the model
4. Evaluate its performance
5. Tune hyperparameters if needed
6. Deploy the model

• Self-signed certificate — Causes a certificate trust warning, not incorrect name resolution.
• Nameserver record — A DNS record problem would usually affect multiple users, unless only this computer uses a different DNS server.
• IP helper — Relays certain network services, commonly DHCP, between subnets; it does not normally determine website name resolution.

• A password cracker would normally be identified by behavior such as loading password hashes or attempting dictionary/brute-force attacks.
• The question describes a routine audit, not password recovery.
• Simply encountering a protected file during an audit is characteristic of a misconfigured or insufficiently privileged FIM.

• transform() — modifies every element in an array
• filter() — keeps elements matching a condition
• exists() — checks whether any element matches
• aggregate() — reduces array elements to one result

sql 
SELECT transform(scores, x -> x * 2) 
FROM student_scores;

• A is incorrect because higher-order functions are mainly useful for nested or complex data.
• B is incorrect because they do not convert logic into Python.
• D is incorrect because their purpose is not to fix slow built-in functions, but to process arrays or maps with custom logic.

• A — If there is no demand, there should be no production.

• B — Not all sales equal profit.

• C — Stocking up on inventory is bad for business.

• D — All costs, except materials, are considered fixed.

• E — Departments should operate at full capacity regardless of bottlenecks.

• Installing software
• Applying configuration changes
• Calling PowerShell scripts
• Running setup or customization commands

cmd 
powershell.exe -ExecutionPolicy Bypass -File C:\Scripts\ConfigureVM.ps1

• GPO logon script: Runs only when a user logs on and depends on domain/GPO processing.
• GPO startup script: Runs during startup, but requires the VM to be domain joined and receives the applicable GPO.
• Place scripts in a VHD: Merely makes the scripts available; it does not automatically execute them.

• The selling division receives a credit based on a favourable transfer price, often market price or full cost plus a profit margin.
• The receiving division is charged a lower amount, such as marginal cost or another agreed price.
• The difference is accounted for centrally by head office or a corporate adjustment.

• HTTPS: Secure web traffic, not general command-line server administration.
• SNMPv3: Secure network monitoring and management, not interactive server login.
• RDP: Provides graphical remote desktop access. It can be secure, but it is not the direct replacement for Telnet in this scenario.
• SMTP: Used to send email.

• contoso.onmicrosoft.com
• contoso1.onmicrosoft.com

• onmicrosoft.com domains: Maximum of five per tenant.
• Custom domains: Domains that your organization owns and verifies in Microsoft 365.

• Default route: 0.0.0.0/0; used only when no more specific route exists.
• Network route: A route covering the destination, such as 10.10.13.0/24.
• Host route: An exact 10.10.13.10/32 entry in the routing table.
• Floating static route: A backup static route with a higher administrative distance.

• Constrained VMs: VMs whose workloads are experiencing resource pressure, such as insufficient CPU or memory. They may need additional resources or optimization.
• Overprovisioned VMs: VMs allocated more CPU, memory, or storage than their workloads require. Their resources may be reclaimed or reduced.

• Underprovisioned VMs: This is not the predefined view identified for this report question.
• Zombie VMs: These are typically inactive or unused VMs and are useful for cleanup, but they are not the two views specifically intended here to identify inefficient resource allocation.

• Honeypots: Deliberately vulnerable or attractive systems designed to lure attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of compromise.
• DNS sinkholes: Redirect requests for known malicious domains to a controlled internal system instead of allowing the connection. This can identify infected hosts attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it protects data but does not primarily detect attackers.
• CI/CD: Automates software development and deployment processes.
• Threat modeling: Identifies potential threats and weaknesses before or during system design.
• Data obfuscation: Makes data harder to understand, but it is not an attacker-detection method.

• S3 Glacier Deep Archive is designed for long-term archival data with very infrequent access and has a lower storage cost than S3 One Zone-IA.
• The documents are copies stored elsewhere, so reduced availability and delayed retrieval are acceptable.
• An S3 interface VPC endpoint allows private access from the VPC without exposing the bucket through the public internet.
• A bucket policy can restrict access to requests coming through that endpoint.

• Keep earlier prompt versions.
• Identify the last version that produced acceptable output.
• Restore it as a baseline.
• Make small, controlled changes—ideally one significant change at a time.
• Test the output after each change.

• A: Discards useful information about what worked.
• B: Large simultaneous changes make it difficult to identify the cause of problems.
• D: Accepts output that does not meet the requirements.

• MTTC: Time required to contain or limit the incident’s impact — best match.
• MTTR: Time required to remediate or recover from the incident; this may include eradication, restoration, and cleanup, which goes beyond merely stopping spread.
• MTTD: How long it takes to discover the incident.
• MTBF: Average time between failures, generally a reliability metric.

• The audience and stakeholders
• The complexity and type of requirements
• The communication method and level of detail needed
• Whether to use diagrams, models, documents, demonstrations, or slides

• B: Authority to host the presentation is not the key preparation activity.
• C: Stakeholder sign-off may occur later; presenting requirements does not always require formal approval beforehand.
• D: A scribe may be useful in a meeting, but hiring one is not a core preparation requirement for presenting.

• B — The most significant risks are held by SQ.

• C — SQ should recognise the cars as inventory.

• F — SQ recognises revenue when LM sells a car to a third party.

• A: LM does not hold the most significant risks.
• D: LM does not recognise the cars as inventory.
• E: SQ should not recognise revenue when cars are merely delivered to LM.

sql 
ALTER TABLE dbo.DimCustomer 
ADD CONSTRAINT PK_DimCustomer 
PRIMARY KEY NONCLUSTERED (CustomerKey) 
NOT ENFORCED;

1. ALTER TABLE dbo.DimCustomer
2. ADD CONSTRAINT PK_DimCustomer PRIMARY KEY NONCLUSTERED (CustomerKey)
3. NOT ENFORCED

• Atomicity: a write fully succeeds or does not appear.
• Consistency: table state remains valid.
• Isolation: concurrent operations do not corrupt one another.
• Durability: committed changes persist.

• Flexible schemas: common data lakes often support flexible or schema-on-read data.
• Open-source formats: common data lakes commonly use open formats such as Parquet.
• Scalable storage: cloud data lakes already provide scalable storage.

• Maximum response and resolution times
• Expected uptime or availability
• Performance requirements
• Escalation procedures
• Consequences for failing to meet requirements

• SOW: Defines a project’s scope, tasks, deliverables, and schedule.
• MOA: Documents specific responsibilities agreed upon by two parties.
• MOU: Records a general understanding or intent to cooperate.

• Existing measures
• Relationships
• Calculated columns
• Tables and fields
• Existing transformations in the model

• SharePoint folder: Reconnects to the source files. You would likely need to recreate the model and measures.
• Power BI dataflows: Primarily provide reusable data preparation and storage, but they do not automatically provide the existing semantic model and measures.
• Excel workbook: Connects directly to the source file and would also require rebuilding the model and measures.

• Case Assignment Rules normalmente são avaliadas quando o caso é criado. Elas podem ser executadas novamente em uma edição somente se o usuário marcar “Assign using active assignment rules”; isso não acontece automaticamente apenas porque o caso foi fechado.
• Portanto, criar uma regra de atribuição não corrige os centenas de casos já fechados e não garante, por si só, que um caso será transferido antes de ser fechado.

• B — Usar uma ferramenta de dados: corrige os registros históricos já existentes, atualizando o Owner.
• D — Criar uma regra de validação: impede que um caso seja fechado enquanto ainda pertence a uma fila. Exemplo conceitual: se Status = Closed e o proprietário for uma fila, bloquear o salvamento.

• 2018-12-31 — the date
• 08:59 — the time

• Changing the original column to Date may fail because it still contains the text at and a time.
• Extracting the last 11 characters does not isolate the date.
• Extracting the first 11 characters gets the date plus a space, but the option does not specify changing the result to the Date type.

• CHAP: Uses a challenge-response exchange, so the password is not directly transmitted.
• IPsec: Provides authentication, integrity, and encryption for IP communications.
• EAP: An authentication framework that supports stronger methods, such as certificates or token-based authentication.

• Error correction (ECC): Improves data reliability but does not maximize bandwidth.
• RAM voltage: Increasing voltage may affect stability or speed, but it is not the primary method for increasing module bandwidth.
• Physical module size: Refers to the capacity or form factor of the RAM, not its data-transfer bandwidth.

• Fine-tuning requires a properly formatted training dataset.
• For classification or instruction-style fine-tuning, examples are supplied in JSONL format.
• Each line represents one training example, typically containing the input prompt and the desired completion or label.
• The file must then be uploaded or made available to the Microsoft Foundry fine-tuning workflow.

• A: Prompt Flow is useful for prompt experimentation, but it is not required to start fine-tuning.
• B: You do not need to deploy the base model to an online endpoint before fine-tuning.
• C: Tracing supports observability and evaluation, but it does not prepare the fine-tuning job or dataset.

• B: Developer Edition has limited user, storage, and data-volume capacity, making realistic community testing difficult.
• C: A Developer Edition org cannot contain sandboxes, so it cannot provide separate environments for development, integration, and UAT.
• E: A standalone Developer Edition org is not part of the production org’s deployment path, so change sets cannot be used to deploy from it directly to that production org. The team would need Metadata API, Salesforce CLI, or another deployment method.

• # Development
• # Testing
• # Production

• Separate endpoints: relate to compute or connectivity, not dashboard labels.
• Separate queries: retrieve or transform data but do not designate visual sections.
• Direct text written into the dashboard in editing mode: dashboards use text boxes, typically with Markdown formatting, rather than arbitrary text placed directly on the canvas.

• Label applied does not automatically exclude a file from Copilot.
• Encryption/usage rights determine whether Copilot can access the file’s content.
• If the user has no permission under Label2, File3 should be unavailable to Copilot for that user.
• File3’s label might be inherited by derived content only if File3 was actually processed and contributed by an authorized user; it should not be treated as contributing merely because it exists in the source set.

• A local network gateway represents an on-premises network—its address space and VPN device information—for an Azure Site-to-Site VPN connection.
• It does not control which connection types are allowed between Azure web servers and database servers.
• It is also unnecessary when both server groups are in the same Azure virtual network.

• A hypervisor allows multiple virtual machines to run on one physical server.
• Each VM can have its own operating system, so the customer can consolidate Windows, Linux, and Unix servers.
• A Type 2 hypervisor runs on a host operating system and can be deployed on local hardware, helping address data privacy and avoiding ongoing public-cloud charges.

• Containers share the host operating system’s kernel.
• They are well suited to consolidating applications, but they generally cannot independently run a mix of unrelated kernels such as Windows, Linux, and Unix on one host.

Box 1: No

• configure_azure_monitor() configures Azure Monitor and the OpenTelemetry pipeline.
• LangChain requires its own instrumentation or callback tracer, such as AzureAIOpenTelemetryTracer.
• You must pass the tracer to the LangChain execution configuration so chains, tools, prompts, and model calls become spans in Application Insights.

Box 2: Yes

text 
OTEL_SERVICE_NAME=customer-agent 
OTEL_SERVICE_NAME=invoice-agent

• The message came from the claimed sender (authentication)
• The message was not altered (integrity)
• The sender cannot easily deny sending it (non-repudiation)

• Attackers can send unsigned phishing emails.
• Attackers may compromise a legitimate account and send signed malicious emails.
• Users may still be tricked by a validly signed message.

• Static IP address: Not needed if the workstation already has network connectivity.
• Subnet mask: Incorrect subnetting would usually prevent local communication, including pinging the server.
• Default gateway: Primarily affects communication outside the local network; it does not normally prevent finding an internal domain controller.