Salesforce Certified Tableau CRM and Einstein Discovery Consultant Exam Prep
Salesforce Certified Tableau CRM and Einstein Discovery Consultant (Page 2 )

• Strongest encryption algorithms: Choose the strongest available encryption and integrity options, typically AES with the largest key size and a secure integrity algorithm.
• Encrypt all traffic: Select tunnel mode rather than transport mode. Tunnel mode encrypts the entire original IP packet, which is appropriate for a site-to-site VPN between branch networks.
• Secret-password authentication: Configure a pre-shared key (PSK) on both VPN concentrators. The key must match at both ends.

1. Remote access to a Windows PC
2. Full chat and optional game-console functions

• Windows Remote Desktop (RDP) uses TCP 3389. The router needs a port-forwarding rule that sends incoming traffic on that port to the Windows PC’s internal IP address.
• The game console should connect through the wireless AP. Using WPA2-PSK provides the required wireless security while allowing normal online, chat, and optional services.
• The firewall should separate the internal network from the screened subnet. Its screened-subnet-side address is shown as 10.100.0.1.
• Devices must be placed in the correct network locations: the PC behind the router, the console on the wireless AP, and the firewall between the appropriate network segments.

• Amazon Kendra is a managed enterprise search service that can index content stored in S3 and support natural-language queries to find text inside documents (PDFs, Word files, etc.).

• Rekognition analyzes images/videos, not document text search.
• Polly is a text-to-speech service.
• Lex is a chatbot service.

• Create a Kendra index.
• Add a data source of type S3 and point it to your bucket (with an IAM role that allows access).
• Configure/document conversion if needed, then index the data.
• Use the Kendra API or console to run natural-language queries against your indexed documents.

• What it’s asking: In an ARM template, for an Availability Set, what value should you set for the property platformFaultDomainCount to maximize availability during fabric failures or maintenance?

• Key concept: Fault domains are groups of hardware that can fail independently. By spreading VMs across more fault domains, you reduce the risk that a single hardware fault takes out many VMs.

• Important detail: For managed Availability Sets, the number of fault domains you can use varies by region — typically 2 or 3.

• What to choose: Set platformFaultDomainCount to the maximum supported in your region. In most regions this is 3, which gives you the best resilience. If your region only supports 2, you’d use 2.

• Answer: 3 (Max Value). In ARM template syntax, this would appear as "platformFaultDomainCount": 3 (within the Availability Set resource).

• IaaS provides virtualized infrastructure, including VMs, disks, and networking. You manage the guest operating system and software installed on the VM.
• PaaS provides a managed platform for deploying applications without managing the underlying VMs or operating systems. Examples include Azure App Service and Azure Functions.

• Idioma: “Responda em português.”
• Tamanho: “Responda em até três frases.”
• Formato: “Use uma lista com três recomendações.”
• Objetivo: “Recomende produtos com base nas necessidades do cliente.”

• Mudar o tamanho do LLM: pode alterar capacidade e custo, mas não garante idioma ou respostas curtas.
• Aumentar a temperatura: aumenta a criatividade e a aleatoriedade; não controla diretamente o tamanho ou idioma.
• Aumentar o Top K: permite considerar mais tokens prováveis, aumentando a variedade; também não é o mecanismo principal para controlar idioma ou comprimento.

• IKE: Negotiates security parameters for IPsec VPNs; it does not identify switch ports.
• VLAN: A logical network segmentation method, not a discovery protocol.
• netstat: Displays local network connections and listening services, but cannot identify the physical switch or port.

• Wiping securely overwrites the drive so the original data cannot reasonably be recovered. It is generally less expensive than physically destroying the device.
• Recycling could expose the data if the drive is not securely erased first.
• Shredding physically destroys the drive and is effective, but usually more costly and prevents reuse.
• Deletion only removes file references; it is not a secure sanitization method.

• Uses on-premises data or resources
• Runs components in the cloud
• Can scale across multiple cloud environments when demand increases

• Public cloud: Resources are hosted entirely by a cloud provider.
• Private cloud: Resources are dedicated to one organization, usually in its own environment.
• Hybrid: Combines on-premises and cloud resources.

• Alice is co-resident on the same physical host and exploits shared hardware (the processor cache) to infer secrets. This is the classic definition of a side-channel attack—information leakage through implementation details (like timing or cache behavior) rather than by breaking a protocol or injecting code.

• Observing cache timing or access patterns to deduce cryptographic keys or plaintext data from the victim VM.

• Man-in-the-cloud attack: targets cloud trust/auth, not local hardware sharing.
• SQL injection: exploits input to run SQL commands, not a VM/caching vector.
• Service hijacking: takes control of a service, not about covert data leakage via shared hardware.

• Notice phrases like “shared hardware resources,” “co-resident,” or “cache”—these indicate a side-channel vector.

• SageMaker endpoint: Not required because the model is being used through Amazon Bedrock.
• SageMaker Model Registry: Used for managing SageMaker models, not for making a Bedrock custom model available.
• Grant access in Amazon Bedrock: IAM permissions may still be needed, but granting access alone does not provide the required inference capacity.

• Create a record-triggered Flow on Opportunity.
• Run it when the record is created or updated.
• Add entry criteria such as Probability > 50%.
• Use Create Records to create the related Sales Demo Request, populating its Opportunity lookup.

• Apex Trigger: Possible, but unnecessary custom code for a straightforward automation requirement.
• Workflow Rule: Cannot create a related custom record.
• Process Builder: Could create a record, but Flow is Salesforce’s preferred and more capable declarative automation tool.

• State is stored remotely in Terraform Cloud/Enterprise, not as a local file.
• Terraform runs (plan/apply) can be executed on remote infrastructure, with results visible in the remote workspace UI.
• Supports workspace-based organization, state locking, and concurrency control.
• Useful for team collaboration, centralized governance, and auditable logs.

• In your configuration, you use a backend block like backend "remote" { ... }.
• You still run terraform init to configure/migrate to the remote backend.
• After setup, terraform plan/terraform apply may be executed remotely, and the outputs/logs appear in the Terraform Cloud/Enterprise UI rather than (only) in your local terminal.

• Other backends store state remotely but typically do not provide remote execution; with the remote backend you get remote runs and a collaborative UI, not just remote state storage.

• Dynamics 365 Remote Assist — used for remote collaboration and mixed-reality scenarios.
• Dynamics 365 Finance — supports financial and operational management.
• Dynamics 365 Business Central — designed primarily for small and medium-sized businesses’ finance and operations.
• Dynamics 365 for Phones — provides mobile access to Dynamics 365 apps, including Sales, through the mobile Unified Interface.

• User1 can sign in because the account is cloud-only. It does not depend on the on-premises domain.
• User3 can sign in because the account uses Password Hash Synchronization (PHS). Azure AD has a synchronized password hash and can validate the sign-in even when connectivity to on-premises Active Directory is unavailable.
• User2 cannot sign in because the account relies on Pass-through Authentication (PTA). PTA sends the authentication request to an on-premises PTA agent, which must contact a domain controller. With the internet connection from on-premises lost, that validation cannot occur.

• The correct answer is A: CCTV recordings are not regularly reviewed.

• CCTV is a monitoring/control mechanism. If recordings aren’t reviewed, security events (break-ins, policy violations, equipment tampering) can go undetected and unaddressed.
• Regular review is essential for deterrence, incident response, and forensic evidence. Without it, the entire CCTV control provides little value.

• B (records deleted after one year) affects forensic availability, but it’s a data-retention issue rather than the ongoing effectiveness of the surveillance program.
• C (footage not recorded 24x7) creates gaps in coverage, which is a concern, but regular review of available footage still supports detection; 24x7 coverage is a separate policy/perimeter issue.
• D (cameras not in break rooms) is more about privacy and space planning than core data-center security monitoring.

• Amazon GuardDuty: Detects suspicious activity and threats using security-related data sources; it is not primarily a software vulnerability scanner.
• Amazon Detective: Helps investigate and analyze the root cause of security findings after an event.
• Amazon Cognito: Provides user authentication and authorization for applications.

• A: Security groups do not control traffic to an S3 gateway endpoint in this way. Gateway endpoints are configured through route tables.
• B: An S3 bucket policy may be needed for authorization, but the error specifically indicates a connectivity or endpoint-routing problem.
• C: Glue connection settings do not require a fully qualified domain name to resolve this endpoint issue.

• Answer:

• Why:

• Why the other centers aren’t the right fit here:

• Correct answer: only new data added to the eventhouse (option E).
• Why: When you enable OneLake availability for the eventhouse, OneLake starts syncing data going forward. It does not automatically backfill or copy over data that already exists in the eventhouse before the enablement.
• What that means in practice: Any data added to the eventhouse after you enable OneLake will appear in OneLake (and be visible from OneLake file explorer). Pre-existing data in the eventhouse stays there unless you perform a separate backfill/copy operation outside the standard OneLake enablement.
• How to verify: add a small new dataset to the eventhouse after enabling OneLake availability, then check OneLake to confirm the new dataset appears.

• Why Ishikawa:

• Why not the others:

• Basic: Self-help only; no technical support or design assessment.
• Standard: Technical support, but not the full proactive architectural guidance required here.
• Professional Direct: Provides proactive guidance and architecture-related assistance.
• Premier: Also supports this, but is a more expensive, enterprise-level option.

• AWS IoT Greengrass supports local ML inference using models trained in Amazon SageMaker.
• The model and inference code run on the factory’s local server, so processing continues even when internet connectivity is unavailable.
• A Greengrass component can:

• This provides low latency and avoids sending images to AWS for every inference.

• A: Uses AWS-hosted services and therefore depends on internet connectivity. It would fail during an outage.
• C: Snowball Edge is unnecessary for this use case and adds deployment complexity. A local Greengrass server is the intended edge-inference solution.
• D: Amazon Monitron is designed for monitoring industrial equipment health, not analyzing camera images with a custom SageMaker model.

• Ablauf: Er wird in der gleichen Transaktion ausgeführt, bei der z. B. ein Datensatz erstellt oder aktualisiert wird. Der Benutzer wartet, bis der Workflow abgeschlossen ist.
• Stufen: Kann vor dem Vorgang (pre-operation) oder nach dem Vorgang (post-operation) laufen.
• Zweck: Sofortige Validierung oder Anpassung von Daten, ggf. auch das Verhindern eines Vorgangs, wenn Bedingungen nicht erfüllt sind.

• Automatisierte Flows (Power Automate, automatisierte/ Background Flows) laufen asynchron im Hintergrund, nachdem der Trigger erkannt wurde, und blockieren den Benutzer nicht.

• Enable the owner dimension
• Allocate a standard costing inventory model

• Owner dimension (B): This dimension Lets you track who owns the stock. By enabling the owner dimension, items can be configured as either company owned or consignment (vendor-owned) when you create or edit items. Without enabling this dimension, you can’t designate ownership per item.
• Standard costing inventory model (D): Selecting a costing model determines how item costs are calculated and posted. Standard costing provides a fixed cost per unit, which is commonly used for agreed pricing scenarios like consignment arrangements for easier accounting and valuation. It helps ensure consistent cost treatment across transactions for items that can be owned by the company or on consignment.

• Batch dimension (A): Batch tracking is unrelated to ownership and isn’t required to support company-owned vs. consignment configurations.
• Moving average costing (C): This is an alternative costing method. It’s not required to enable ownership config, and the exam’s expected choice focuses on standard costing for this scenario.

• Honeypots: Decoy systems or services designed to attract attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of unauthorized activity. Security teams can also observe attacker behavior.

• DNS sinkhole: Redirects requests for known malicious domains to a controlled internal server or blocks them. If an infected workstation attempts to contact command-and-control infrastructure, the sinkhole records the request and helps identify the compromised device.

• Tokenization: Protects sensitive data by replacing it with tokens.
• CI/CD: Automates software development and deployment.
• Threat modeling: Identifies potential risks before or during system design.
• Data obfuscation: Makes data harder to understand, but does not detect intruders.

• Correct answer: B (No, it does not).

• A purchase agreement in Dynamics 365 SCM is a vendor-side price arrangement. It sets prices/discounts for what your company buys from suppliers, not for what you sell to customers.
• The objective in Question 2 is to give clients a quantity-based discount on items they purchase from you. To accomplish this, you should configure a sales price / trade agreement (on the customer/sales side), not a purchase agreement.
• In a sales price trade agreement, you can define quantity breaks such as:

• Create a Sales price trade agreement for the item and relevant customer (or customer group).
• Add quantity breaks: 51–100 with 10% discount, 101+ with 15% discount.
• Ensure the agreement is active for the desired date range.

• SAMLRequest: the SAML authentication request
• RelayState: the original destination or application state

• RedirectURL: not the standard SAML parameter for preserving the original request.
• DisplayState: not a standard SAML SSO parameter.
• StartURL: Salesforce-related terminology, but not the standard parameter used in this SAML exchange.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Cloud financial management
• Portfolio and program management
• Risk management
• Data governance
• Compliance and oversight

• Create and manage catalogs of approved IT services
• Govern and publish infrastructure-as-code (IaC) templates, commonly AWS CloudFormation templates
• Control which users can deploy specific products and configurations
• Apply versioning, permissions, and deployment constraints

• AWS Resource Explorer: Searches and discovers AWS resources; it does not govern IaC templates.
• AWS Organizations: Manages multiple AWS accounts, policies, and consolidated billing.
• AWS Systems Manager: Helps operate and manage deployed resources, such as patching and automation, but is not primarily a catalog for governed IaC products.

• A. Number ? Decimal — Correct. Salesforce Number fields are represented in Apex as Decimal.
• D. Date/Time ? Datetime — This is correct conceptually, but “Dateline” is not an Apex type. If the option literally says “Dateline,” it is incorrect.
• E. Checkbox ? Boolean — Correct. A checkbox contains true or false.

• Number ? Integer — A Number field maps to Decimal, even when its scale is zero.
• Text Area ? List<String> — A text area maps to a single String, not a list.

1. Download the updated VPN client configuration package from the Azure VPN gateway.
2. Remove or update the existing VPN client configuration on the Windows 10 workstation.
3. Install the new package and reconnect.

• Answer: Internal load balancers (ILB) — option C.

• An ILB has a frontend IP address that must be a private IP within the subnet’s address space. You pick this IP when you create the ILB, and it can be Static or Dynamic.
• Other options don’t require a per-subnet IP:

• Post-Incident Review (A) is the after-action step used to capture lessons learned, identify process gaps, and drive improvements across the incident response lifecycle. This directly supports process maturity and a stronger security posture.
• Incident Analysis (D) focuses on investigating root causes during/after an incident, which is important but more of a diagnostic activity than a standalone baseline improvement to maturity.
• Fast Eradication (B) and Incident Containment (C) are tactical actions aimed at stopping the incident, not on maturing the process.

• Correct answer: S3 Versioning

• Why the other options aren’t suitable for this protection:

• Quick tip: For enhanced protection, enable Versioning (and consider related features like Object Lock for write-once scenarios in specific compliance cases).

• Correct answer: Day 3 (Option B)

• Why: In Engagement Studio, when the program is paused, the prospects’ wait times are also paused and do not count down. They resume from the same point when the program restarts. Here, the prospect was at day 3 of a 5-day wait when paused, so they resume on day 3 after the 1-day pause.

• Creating and managing users and roles
• Granting and revoking roles and privileges
• Managing access-control responsibilities

• SYSADMIN: Manages warehouses, databases, schemas, and other objects—not primarily users and roles.
• PUBLIC: Automatically granted to every user; it is not an administrative role.
• ACCOUNTADMIN: Has the highest level of access, but should be reserved for account-level administration and emergencies rather than routine security tasks.

• The legacy system creates a signed JWT assertion.
• Salesforce validates the assertion using a certificate configured on a Connected App.
• Salesforce issues an access token for the integration user.
• No refresh token is required; the system can request a new access token when needed.

• Web Server Flow: normally uses a client secret and authorization/refresh tokens.
• Username-Password Flow: requires storing Salesforce credentials and is discouraged for integrations where stronger options are available.
• User Agent Flow: intended for user-interactive applications, not unattended server-to-server processing.

• Microsoft 365 groups can contain users, but generally can’t contain other groups as members.
• Security groups can contain users and, where supported, other security groups.
• Distribution groups have different nesting restrictions and aren’t equivalent to security groups.
• Dynamic groups can’t be manually populated with members; their membership is calculated from rules.
• A group’s membership type (Assigned or Dynamic) and group type determine whether it can be added to another group.

• Árvores de decisão: usam regras sequenciais, como “se característica X > valor, siga para este ramo”. São fáceis de visualizar e explicar. Atendem bem a problemas de classificação e regressão com alta interpretabilidade.

• Regressão linear: prevê um valor numérico contínuo, como preço, custo ou temperatura. Não é a escolha principal para classificar genes em categorias.

• Regressão logística: calcula a probabilidade de uma categoria. Pode atender à classificação, inclusive multiclasses, mas sua explicação costuma ser menos intuitiva que uma árvore para documentar decisões.

• Redes neurais: atendem a tarefas complexas, como imagens, texto e padrões não lineares. Porém, são menos interpretáveis, funcionando mais como uma “caixa-preta”.

• Copilot??????????
• ???????????????
• ??????????
• ?????????????
• ???????????????????

• Prompts and Suggestions: Retained for 28 days
• User Engagement Data: Kept for Two Years

• A) configure matching hold and delay timers

• B) configure matching key-strings

• C) configure matching priority values

• D) configure unique virtual IP addresses

1. Ensure BOMs can include subcomponents ? Configure an entity relationship

1. Report changes made by engineers ? Enable auditing

• Configure entity relationship
• Configure auditing

• nomes de pessoas;
• organizações;
• locais;
• datas;
• números de processos;
• leis ou contratos.

• NER = identifica informações específicas e classificáveis.
• Sumarização = reduz um documento e apresenta seus pontos principais.

• Amazon DynamoDB — Managed NoSQL database, not PostgreSQL.
• Amazon Athena — Serverless service for querying data in S3; intended for analytics, not OLTP.
• Amazon EMR — Managed cluster platform for big-data frameworks such as Hadoop and Spark.

python 
import azure.cognitiveservices.speech as speechsdk 


speech_config = speechsdk.SpeechConfig( 
    subscription="YOUR_KEY", 
    region="YOUR_REGION" 
)

Important Azure Speech SDK classes

• SpeechConfig

• AudioConfig

python 
  audio_config = speechsdk.audio.AudioConfig( 
      use_default_microphone=True 
  )

• SpeechRecognizer

python 
  recognizer = speechsdk.SpeechRecognizer( 
      speech_config=speech_config, 
      audio_config=audio_config 
  )

• SpeechSynthesizer

• AudioOutputConfig

 Bogotá, Colombia