Salesforce Certified Tableau CRM and Einstein Discovery Consultant Exam Prep
Salesforce Certified Tableau CRM and Einstein Discovery Consultant (Page 26 )

• Vulnerability scanner: Finds technical weaknesses in systems, applications, or devices. It does not usually analyze the entire supply chain.
• Penetration test: Simulates attacks against a defined target to identify exploitable weaknesses. Its scope is narrower.
• SCAP (Security Content Automation Protocol): Provides standardized formats and methods for automating security configuration and vulnerability checks, rather than mapping the full supply chain.

• Code signing: Verifies the software’s authenticity and integrity; it does not hide the source code or prevent reverse engineering.
• Tokenization: Replaces sensitive data with tokens, mainly for protecting data such as payment information—not software logic.
• Blockchain: Provides a tamper-resistant record of transactions or data; it does not protect compiled code from analysis.

• Menerjemahkan soal ke bahasa Indonesia.
• Menyebutkan jawaban yang benar.
• Menjelaskan alasan jawaban tersebut.
• Memberi tahu jika kunci jawaban yang tersedia tampaknya keliru.
• Menjelaskan istilah teknis penting dalam soal.

• What information each stakeholder needs
• When and how often it should be communicated
• Which format or channel should be used
• Who is responsible for communicating it

• A: The team should not decide stakeholder communications without first checking the established plan and CEO’s needs.
• B: An executive summary may be appropriate, but choosing a solution before reviewing the plan is premature.
• D: The stakeholder engagement plan addresses how to engage stakeholders, but this is primarily a communication planning issue.

• IRR assumes that interim cash flows can be reinvested at the project’s own IRR. This may be unrealistic, especially when the IRR is very high.
• MIRR assumes reinvestment at a specified rate, usually the company’s cost of capital or another realistic reinvestment rate.

• B: MIRR does not specifically favour projects with long payback periods.
• C: MIRR and IRR can rank competing projects differently.
• D: MIRR is not always higher than IRR; it may be higher or lower depending on the cash flows and reinvestment rate.

1. Create or verify cost groups

1. Set up the item model group

1. Create the costing version

1. Enter or calculate item costs

1. Activate the standard costs

1. Find the subnet-mask increment in the octet where the prefix ends.
2. Identify the network address by finding the subnet boundary at or below the given IP.
3. The first usable address is network address + 1.
4. The broadcast address is one address before the next subnet.
5. The last usable address is broadcast - 1.

• 172.28.228.144/18

• 172.28.228.144/23

• A is correct: Days beyond the included period incur an extra daily charge.
• D is incorrect: Daily use after 10 days is not free.
• B and C: Data-transfer pricing can depend on the direction and service terms. The exam’s intended distinction is that the included device usage period is the clearly stated no-cost benefit.

• Sending calls to available agents quickly
• Balancing interactions across agents
• Preventing calls from being handled manually one at a time

• Workforce Management: Forecasts demand and schedules enough staff; it supports wait-time reduction but does not directly distribute calls.
• Skill-based Routing: Routes calls based on agent skills and may improve the customer experience, but the question is asking about the core feature that distributes calls efficiently.
• IVR: Lets callers navigate menus and self-service options; it does not primarily assign calls to agents.

• Response and resolution time frames
• Availability or uptime requirements
• Performance targets
• Support obligations
• Penalties for failing to meet requirements

• SOW (Statement of Work): Defines the project’s scope, tasks, and deliverables.
• MOA (Memorandum of Agreement): Describes cooperation and responsibilities between parties.
• MOU (Memorandum of Understanding): Records a general mutual understanding, usually without detailed enforceable service targets.

• SAML: Enables federated authentication and single sign-on between the IdP and SaaS providers.
• OAuth tokens: Allow delegated application access; OAuth is not primarily the first step for employee SSO.
• Password vaulting: Stores or autofills multiple passwords but does not eliminate the separate credentials or provide true federation.

• Azure creates a corresponding service principal in Microsoft Entra ID.
• The identity’s lifecycle is tied to the Azure resource.
• If the resource is deleted, Azure automatically deletes the identity.
• Only the associated resource can use that identity to request tokens.
• You can grant the identity permissions to access services such as Key Vault or Storage without storing credentials in code.

• The Subscribe to Reports user permission.
• At least Viewer access to the report’s folder.
• Access to the report itself.

• Subscribe to Reports: Run Reports is not the relevant Salesforce permission.
• Chatter Subscribe to Reports is not a Salesforce permission.
• Set Running User relates to configuring the user whose permissions determine report results—not subscribing to a report.

• A: Configure security groups — Customers define inbound and outbound rules for resources such as Amazon EC2 instances.
• B: Classify company assets — Customers decide how their data and assets should be classified and protected.

• C: Amazon S3 is a regional service; customers select a Region, not individual Availability Zones for buckets.
• D: AWS manages the infrastructure and patching for Amazon DynamoDB.
• E: AWS manages the infrastructure used by AWS Lambda; customers do not select EC2 instances for Lambda functions.

• Configure row-level security (RLS) using the sales region and the HR manager’s identity.
• Publish the reports and datasets through a Power BI app.
• Grant the HR managers permission to use the app, but do not add them as workspace members.
• App users can view and interact with reports while RLS limits them to their region.
• They cannot modify the report layout because they do not have workspace editing permissions.

• Adding them to the workspace gives them workspace permissions that may allow report or dataset changes, depending on the assigned role.
• Creating copies is unnecessary and creates maintenance and security problems.
• Hosting datasets and reports in different workspaces does not, by itself, provide the required controlled access.

• Reviewing and validating generated code
• Checking security, licensing, and quality concerns
• Testing the implementation
• Making the final design and coding decisions

• A: Copilot is not a complete replacement for developers.
• C: Human input, review, and oversight are still required.
• D: Copilot Chat supports many tasks beyond debugging, including explanation, generation, refactoring, and testing assistance.

• Accept: Acknowledging the risk without taking additional action.
• Transfer: Shifting responsibility or financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reducing the likelihood or impact of the risk through controls.
• Avoid: Eliminating the activity or condition that creates the risk.

• Restrict a port to a defined number of MAC addresses
• Use statically configured or “sticky” MAC addresses
• Shut down or restrict the port when violations occur

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect suspicious traffic but is not the primary control for switch-port MAC limits.
• NGFW: Filters routed network traffic, not the switch’s CAM/MAC address table directly.

yaml 
clusterIP: None

• CronJob: Runs Jobs on a schedule and normally does not need stable networking.
• Deployment: Manages interchangeable, stateless replicas and usually uses a regular Service.
• DaemonSet: Runs a Pod on selected nodes but does not inherently require stable Pod identities.

• SQL injection
• Cross-site scripting (XSS)
• Malicious or malformed web requests
• Some application-layer abuse

• Layer 4 firewall: Filters based mainly on IP addresses, ports, and connections; it lacks detailed web-request inspection.
• NGFW: Provides broader network security, but a WAF is more specialized for protecting web applications.
• UTM: Combines multiple security functions, but it is not necessarily optimized for web-application protection.

• A — Custom Button: A button can launch a flow, typically by passing the flow’s URL and record context.
• D — From a Process: A Process can invoke a flow using an Apex action configured for flow invocation. However, this is automation-triggered, not directly accessed by a user.
• B — Quick Action: In current Salesforce functionality, a Flow Quick Action can launch a screen flow directly from a record page. This makes B a valid modern method.
• C — Visual Workflow Launcher: This is not generally listed as a standard access method in current Salesforce terminology; Salesforce commonly uses the Flow component on Lightning pages instead.

• contoso.onmicrosoft.com
• contoso1.onmicrosoft.com

• onmicrosoft.com domains: Maximum of five per tenant.
• Custom domains: Domains that your organization owns and verifies in Microsoft 365.

• Normalize casing in the data source—for example, convert all values to uppercase or lowercase.
• Add an index key to provide a unique, stable identifier for each row or value.

• Customers may boycott V’s products.
• Supermarket customers may stop buying from V.
• Investors may view V as having higher legal, ethical and reputational risk.
• V could face fines, lawsuits, contract losses and higher costs.
• Expected future profits may fall.

• The identified risk
• Its likelihood and potential impact
• The person or team responsible for handling it
• The response or treatment plan
• Risk thresholds, such as when escalation or action is required
• Current status and review dates

• Risk tolerance: The amount of risk an organization is willing to accept; it is a concept or limit, not usually the primary documentation.
• Risk transfer: Moving the responsibility or financial impact of a risk to another party, such as through insurance.
• Risk analysis: The process of evaluating risk likelihood and impact.

• Tokenization: Replaces the value with a nonsensitive token, often reversible through a secure token vault.
• Hashing: Converts data into a one-way fixed-length value, generally used for integrity checks or password storage.
• Obfuscation: A broad term for making data difficult to understand; it is less precise than masking in this context.

• Each Case must follow defined support steps.
• Each step must be completed within a specified time limit.

• Case Escalation Rules: Escalate Cases based mainly on age or criteria; they do not model a complete sequence of service steps.
• Process Builder with Scheduled Actions: Can automate time-based actions but is not the standard framework for Case service-level commitments.
• Omni-Channel Routing: Routes work to agents based on capacity and priority; it does not track Case lifecycle deadlines.

• Periodic vulnerability assessments: Identify technical weaknesses but do not establish governance or ensure risks are managed.
• Established information security metrics: Help measure performance and report status, but measurement alone does not make governance effective.
• Advanced security technologies: Support security operations, but governance is primarily about direction, accountability, decision-making, and alignment with business objectives.

• Matching hashes suggest the file has not changed.
• Different hashes indicate that the file was modified, whether authorized or unauthorized.

• Backup: Helps recover the previous version but does not identify or stop unauthorized changes.
• File labels: Classify or mark files; they do not verify integrity.
• Security audit: May discover weaknesses or improper changes, but is periodic and not a direct technical integrity control.

• User preferences change, so the model must learn from recent data.
• Keeping the existing data helps preserve knowledge of older patterns and provides a broader training distribution.
• Training only on new data can cause catastrophic forgetting and may overfit if the new dataset is small.
• The new data should not automatically be used as the test set, because it is needed for training and the model must still be evaluated on separate, representative data.

• Financial performance
• Customer perspective
• Internal business processes
• Learning and growth

• Increasing the number of indicators can make the scorecard cluttered and less useful. Measures should be limited to those that are strategically important.
• The scorecard is mainly a tool for implementing and monitoring strategy, not for formulating strategy.
• It should contain both leading indicators and lagging indicators. Leading indicators predict future performance, while lagging indicators measure results already achieved.

• B. The community must be built with the Customer Account Portal template.

• C. An experience ID (expid) or placeholder parameter must be used in the URL.

• A: The Visualforce + Salesforce Tabs template does not provide this dynamic branding capability.
• D: An external CMS is not required. The branding configuration is handled within Salesforce Experience Cloud.

• A script of cloud CLI commands: IaC because the commands can be saved, reviewed, versioned, and rerun consistently.
• Manually run curl commands: Not necessarily IaC; they are manual actions unless organized into an automated script.
• A sequence of REST requests passed to an API: Could represent automation, but the wording does not explicitly say they are stored and executed as reusable code.
• Commands entered into a cloud console: Manual operation, not IaC.

1. Start with the 48-bit MAC address.
2. Split it into two 24-bit halves.
3. Insert FF:FE between the halves, creating a 64-bit value.
4. Invert the U/L bit—the seventh bit from the left in the first MAC byte.

text 
MAC:       00:1A:2B:3C:4D:5E 
EUI-64:    02:1A:2B:FF:FE:3C:4D:5E

• FE80 is the prefix commonly used for an IPv6 link-local address, not part of the EUI-64 interface ID.
• The interface ID is not random.
• The MAC address is modified by inserting FF:FE and changing the U/L bit.

1. Convert text and images into numerical embeddings.
2. Store or compare those embeddings.
3. Retrieve the most semantically similar items.

• Embedding model: Best for similarity search and retrieval.
• Generation model: Best for producing new text or other content from multimodal input.

• Reviewing security policies and standards checks whether controls are documented, not whether they work.
• Reviewing security logs may show that monitoring is occurring, but does not directly establish that preventive controls are effective.
• Analyzing technical security practices is broad and may assess implementation, but it is less objective than an actual controlled attack.

• Design/compliance effectiveness: policies, standards, and procedures
• Operational effectiveness: logs, records, and evidence that controls operate
• Technical security effectiveness: penetration testing or vulnerability testing

• Sensitive document shared during a Teams chat: Teams chat
• Sensitive document stored/shared in a Teams channel: Teams channel messages

• Files shared in a chat are generally stored in the sender’s OneDrive, but the relevant DLP context is the Teams chat message and its attachment.
• Files shared in a channel are stored in the team’s SharePoint site, but the relevant context is the Teams channel message.
• The DLP rule can then use an action such as restrict access to the content to prevent guest users from opening the sensitive document.

• B: Trigger.Once + scheduled job

• C: 10-minute processing-time trigger

• Create and manage approved IT services as products
• Control which users can deploy those products
• Apply governance, permissions, and constraints
• Use and manage infrastructure-as-code templates, such as AWS CloudFormation templates

• AWS Resource Explorer: Helps find and browse AWS resources; it does not govern IaC deployments.
• AWS Organizations: Manages accounts, consolidated billing, and organization-wide policies.
• AWS Systems Manager: Provides operational management, such as patching, automation, and parameter storage, but it is not primarily used to catalog and govern IaC-based service deployments.

• A — If there is no demand, there should be no production.

• B — Not all sales equal profit.

• C — Stocking up on inventory is bad for business.

• D — All costs, except materials, are considered fixed.

• E — Departments should operate at full capacity regardless of bottlenecks.

• Espionage: Stealing information for intelligence or competitive purposes.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: A sophisticated attack sponsored by a government.
• Shadow IT: Unapproved technology or access methods used by employees.

• Open or insecure ports
• Enabled legacy or insecure protocols
• Known vulnerabilities and misconfigurations
• Weak services and outdated software

• curl tests web requests and HTTP-based services.
• Wireshark captures and analyzes network traffic; it does not normally scan servers for weaknesses.
• netcat can test connectivity to individual ports and sometimes grab service banners, but it is not a comprehensive vulnerability scanner.

• Accept: Acknowledge the risk and choose not to take additional action.
• Transfer: Shift the risk or its financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reduce the likelihood or impact of the risk, such as by implementing security controls.
• Avoid: Eliminate the activity or condition that creates the risk.

Question 3: AWS Storage Gateway File Gateway

• A: S3 bucket per user — S3 is object storage, not a traditional shared file system; mounting it requires extra tools and is less efficient.
• B: File Gateway — Provides a local file share using standard file protocols while storing files in Amazon S3. This preserves convenient local access and extends storage capacity.
• C: WorkSpaces and WorkDocs — Designed for virtual desktops and document collaboration, not large shared file storage.
• D: EC2 with EBS — EBS is attached to one EC2 instance and is not designed for direct multi-user file sharing.

• Laws and regulations
• Litigation holds
• Industry or contractual obligations
• Tax, financial, health, or privacy requirements

• Business strategy and direction: May influence retention, but cannot override legal requirements.
• Storage capacity and longevity: Practical considerations, not the primary driver.
• Business ease and value analysis: May support decisions after compliance obligations are identified.

• Data loss prevention (DLP): Helps detect or prevent unauthorized data transfers, but does not directly protect data on a stolen, powered-off laptop.
• Operating system hardening: Reduces vulnerabilities and attack surface, but does not adequately protect stored data if the device is stolen.
• Boot security: Helps prevent unauthorized operating systems or boot media from loading. It supports device security but is not the primary solution for protecting the data itself.

• staff use the new system;
• transactions and reports are checked;
• problems are corrected;
• feedback is collected.

• Phased changeover: different parts or functions are introduced in stages, often according to a planned sequence.
• Pilot changeover: one representative department, branch or group acts as a test site before wider implementation.
• Parallel changeover: old and new systems operate at the same time.
• Direct changeover: the old system is stopped and the new one starts immediately.

• vSmart controls the overlay control plane. It uses OMP to exchange routing information, distribute policies, and determine how WAN Edge devices reach one another.
• vManage is the centralized management and configuration platform.
• vBond is the orchestrator. It helps devices authenticate, discover controllers, and traverse NAT during onboarding.
• APIC-EM is not the SD-WAN control-plane component described here.

• A. IDS attack signatures: Primarily detects suspicious network activity, not necessarily malware embedded in uploaded files.
• C. Load balancer: Improves availability and distributes traffic; it does not inspect documents for malware.
• D. WAF: Protects web applications from attacks such as SQL injection and command injection, but its primary role is not scanning uploaded PDFs for malware.