Salesforce CRM Analytics and Einstein Discovery Consultant Exam Prep
Salesforce Certified CRM Analytics and Einstein Discovery Consultant (Page 26 )

• Check whether the data is accurate, complete, and properly prepared.
• Confirm that the pattern is not caused by an outlier, data-quality problem, or modeling issue.
• If the data is valid, treat the result as a potentially valuable new business insight.

• A: A data scientist may help, but expert validation and data-quality checking come first.
• C: Filtering out inconvenient data risks hiding a valid insight.
• D: Einstein’s result should not be accepted without verification simply because it produced the finding.

• Assign the Viewer role to the user.

• The requirement is read-only access within the designated app. The Viewer role provides view-only access.
• The Editor role would enable creating/saving lenses, which violates the requirement.
• The Manager role also implies broader permissions beyond viewing.
• The Use Analytics permission alone enables analytics usage but does not control per-app lens creation capabilities.

• A — Securing information assets: This is the responsibility of management and operational/security teams.
• B — Validating protection: Correct. The auditor checks whether controls—such as access restrictions, encryption, retention, and handling procedures—match the asset’s classification.
• C — Ensuring alignment with regulations: Management and legal/compliance functions typically establish classification requirements; the auditor may assess compliance but does not primarily define alignment.
• D — Defining classification levels: This is a management responsibility based on business needs, risk, and regulatory obligations.

• User preferences change, so the model must learn from recent data.
• Keeping the existing data helps preserve knowledge of older patterns and provides a broader training distribution.
• Training only on new data can cause catastrophic forgetting and may overfit if the new dataset is small.
• The new data should not automatically be used as the test set, because it is needed for training and the model must still be evaluated on separate, representative data.

• Financial performance
• Customer perspective
• Internal business processes
• Learning and growth

• Increasing the number of indicators can make the scorecard cluttered and less useful. Measures should be limited to those that are strategically important.
• The scorecard is mainly a tool for implementing and monitoring strategy, not for formulating strategy.
• It should contain both leading indicators and lagging indicators. Leading indicators predict future performance, while lagging indicators measure results already achieved.

• Base table — the table containing common inherited fields
• Parent table — the table directly extended by the child
• Other tables in the hierarchy

• Access controls — ensuring only authorized users can access it.
• Encryption — protecting the data if it is intercepted or exposed.

• A — If there is no demand, there should be no production.

• B — Not all sales equal profit.

• C — Stocking up on inventory is bad for business.

• D — All costs, except materials, are considered fixed.

• E — Departments should operate at full capacity regardless of bottlenecks.

1. insert con; ? 1
2. Database.setSavepoint(); ? 2
3. update con; ? 3
4. Database.rollback(sp_admin); ? 4

• CSIRT: A team that responds to and manages security incidents.
• CVSS: A scoring system for rating the severity of vulnerabilities.
• SOAR: A technology platform for automating and coordinating security operations and incident response.

• Laws and regulations
• Litigation holds
• Industry or contractual obligations
• Tax, financial, health, or privacy requirements

• Business strategy and direction: May influence retention, but cannot override legal requirements.
• Storage capacity and longevity: Practical considerations, not the primary driver.
• Business ease and value analysis: May support decisions after compliance obligations are identified.

• Accept: Acknowledging the risk and choosing not to take additional action.
• Transfer: Shifting the risk or financial consequences to another party, such as an insurer.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or access restrictions.
• Avoid: Eliminating the activity that creates the risk.

• B. Deploy to a SageMaker endpoint: This is needed for SageMaker-hosted models, not for a model intended to be used directly in Amazon Bedrock.
• C. Register with SageMaker Model Registry: SageMaker Model Registry is unrelated to invoking custom models in Bedrock.
• D. Grant access in Bedrock: Access permissions may be necessary, but they do not replace the required provisioned capacity.

• B. Users accessing Salesforce from public Wi-Fi

• C. Users choosing the same password as their Facebook password

• A: 2FA does not protect an already-authenticated, unlocked session if someone accesses an unattended laptop.
• D: Weak password-reset questions are an account-recovery weakness. 2FA primarily strengthens login authentication, not necessarily the security-question reset process.

• Assign endpoints to a group based on the result of one policy.
• Use that group as the scope of another policy.
• This effectively passes the endpoints from one policy’s processing flow to another.

1. Define – establish the project’s objectives, scope, feasibility and requirements.
2. Design – plan how the project will be carried out, including resources, schedules and controls.
3. Deliver – execute the project and produce the required outputs.
4. Develop – close the project formally and capture learning for future projects.

• Filing documentation and records
• Closing project and accounting systems
• Settling costs
• Handing over the completed work and obtaining sign-off
• Reviewing performance and giving feedback

• 255.255.255.128 = /25: 128 total, 126 usable
• 255.255.255.192 = /26: 64 total, 62 usable
• 255.255.255.224 = /27: 32 total, 30 usable
• 255.255.255.240 = /28: 16 total, 14 usable

• One for the network address
• One for the broadcast address

• 8 total addresses
• 6 usable addresses
• Mask: 255.255.255.248

• Azure Resource Manager (ARM) templates
• Or, in newer Azure terminology, Bicep files

• The listener uses a virtual IP address shared by the availability-group replicas.
• Floating IP, also called Direct Server Return (DSR), allows the SQL Server nodes to respond using the listener’s IP address rather than their individual VM IP addresses.
• This is required for the availability-group listener to function correctly with an Azure internal load balancer.

• Suspended an operator who correctly refused to use unsafe equipment.
• Rewarded another operator for using the equipment despite the broken safety guard.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — This factory’s safety record is likely to be poor.

• Restrict a port to a defined number of MAC addresses
• Use statically configured or “sticky” MAC addresses
• Shut down or restrict the port when violations occur

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect suspicious traffic but is not the primary control for switch-port MAC limits.
• NGFW: Filters routed network traffic, not the switch’s CAM/MAC address table directly.

• D — Value analysis: Correct. It examines an existing product to identify ways of reducing its cost while still providing the required functions, quality and reliability.
• E — Kaizen costing: Correct. It involves making continuous, small improvements and cost reductions while the product is already in production.

• Functional analysis: It is not limited to minimizing the cost of the originally defined functions. It examines what functions are required and how they can be provided at the lowest overall cost.
• Value engineering: Usually applies to the design and development of a new product, rather than being a fundamental redesign of existing organisational processes. That description is closer to business process re-engineering.
• Target costing: The target cost is generally established during the product development stage, before production begins. It is not continuously reset while the product is in production.

• Monitoring: Detects activity but does not remove the underlying risk.
• Patching: Useful for systems that must remain operational, but these desktops are unused.
• Isolating: Can be a temporary containment measure, but permanently removing unnecessary systems is more appropriate.

• Employees can work from any location, including remote sites and offices worldwide.
• Login can be relatively seamless after the device is registered.
• It does not require distributing additional physical authentication equipment.

• Geotagging: Identifies location, but location alone is not a strong authentication method and may prevent legitimate remote access.
• Smart cards: Provide strong authentication but require card readers and physical cards, increasing equipment and management requirements.
• Time-based logins: Typically involve one-time codes that users must enter, making the experience less seamless and potentially requiring a token or authenticator app.

• Two-part tariff pricing: $10 per unit
• Dual pricing: $20 per unit

Two-part tariff pricing

Dual pricing

• Division X, the seller, is credited with the market price: \(\$20\)
• Division Y, the buyer, is charged the marginal cost: \(\$10\)

• Sensitive document shared during a Teams chat: Teams chat
• Sensitive document stored/shared in a Teams channel: Teams channel messages

• Files shared in a chat are generally stored in the sender’s OneDrive, but the relevant DLP context is the Teams chat message and its attachment.
• Files shared in a channel are stored in the team’s SharePoint site, but the relevant context is the Teams channel message.
• The DLP rule can then use an action such as restrict access to the content to prevent guest users from opening the sensitive document.

• Advanced Persistent Threat (APT): A sustained, targeted attack campaign or attacker group—not a vulnerability.
• Trojan: Malware disguised as legitimate software.
• Stealthware: A general term for malware designed to avoid detection; it does not specifically mean an unknown vulnerability.

• Security controls
• Processes and procedures
• Compliance evidence
• Performance against contractual requirements

• Service-level agreement (SLA): Defines expected service performance, such as uptime and response times.
• Memorandum of agreement (MOA): Documents a general agreement between parties, but does not necessarily provide audit rights.
• Supply chain analysis: Identifies risks across suppliers and dependencies, but is not a contractual mechanism for reviewing vendor controls.

• Employees can use approved devices from remote locations or worldwide offices.
• Users do not need to carry or insert extra hardware.
• It helps prevent account takeovers from unknown devices.

• Geotagging: Restricts access based on location, which could interfere with remote work and travel.
• Smart cards: Require additional physical equipment and card readers.
• Time-based logins: Limit access according to time but do not strongly bind access to an authorized user device.

• Deterministic approve/reject results
• Strict adherence to predefined rules
• Consistent, reproducible outcomes
• Auditability and regulatory compliance

1. Open the Microsoft Entra Connect wizard.
2. Select Configure.
3. Choose Customize synchronization options.
4. Authenticate when prompted.
5. On the Domain and OU filtering page, select:

1. Complete the wizard.

• Start-ADSyncSyncCycle only starts synchronization; it does not change which OUs are included.
• Manage federation configures federation settings, which are unrelated to OU filtering.
• Add-ADSyncConnectorAttributeInclusion concerns connector attributes, not selecting additional OUs for synchronization.

• Store privileged credentials securely
• Grant the consultant only the access needed
• Provide temporary or time-limited access
• Rotate passwords automatically
• Record or monitor administrator sessions

• TACACS+: Centralizes authentication and authorization, commonly for network devices, but does not primarily provide password vaulting and privileged-session control.
• SAML: Enables web-based federation and single sign-on, not privileged credential management.
• SSO platform: Reduces the number of passwords users need, but does not necessarily protect administrative credentials or control privileged sessions.
• Role-based access control (RBAC): Assigns permissions based on job roles, but does not by itself prevent password sharing or securely broker administrator access.

• Azure Machine Learning is the overall Azure service.
• Machine Learning designer is the visual, drag-and-drop interface within Azure Machine Learning.
• Microsoft may refer to the broader product as Azure Machine Learning studio, while “Designer” remains the specific visual workflow tool.

• Azure Logic Apps: Workflow and integration automation.
• Azure Batch: Large-scale parallel or batch compute.
• Azure Cosmos DB: Globally distributed NoSQL database.

• Behavioral and anomaly detection
• Threat intelligence integration
• User and entity behavior analytics
• Automated response actions, often through SOAR integration

• Virus signatures: Associated primarily with antivirus or endpoint protection.
• Security agent deployment: Usually an endpoint-management or EDR function.
• Vulnerability scanning: Typically performed by vulnerability-management tools, though a SIEM may integrate their results.

• The type of change: standard, normal, or emergency
• The risk, impact, and complexity
• The change model being used

• A standard change may be pre-authorized through its change model.
• A normal change may require assessment and approval by an appropriate change authority.
• An emergency change may be authorized by an emergency change authority, often using an expedited process.

• Change authorities are not only needed for emergency changes.
• They are not assigned only when a change is deployed.
• They are not only required for normal changes.

Correct reasoning

• Create storage5 as a General-purpose v2 (StorageV2) account.
• Configure Blob object replication from storage5 to an existing compatible storage account.
• The destination must support object replication—typically another StorageV2 or premium block blob account.
• Blob versioning must be enabled on both accounts.
• Blob change feed must be enabled on the source account.
• The accounts must meet Azure’s object-replication requirements, including being in supported regions and having compatible configuration.

• Data Category Groups e categorias;
• Visibilidade dessas categorias para perfis ou permission sets.

• B e C: regras de compartilhamento não são o mecanismo apropriado para restringir resultados de busca do Knowledge por divisão.
• D: a role hierarchy não é o mecanismo principal para controlar a visibilidade de categorias do Knowledge. Além disso, a configuração correta é atribuir visibilidade a perfis ou permission sets.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Cloud financial management
• Portfolio management
• Data governance
• Risk management
• Compliance

• Accept: Acknowledging the risk without taking additional action.
• Transfer: Shifting responsibility or financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reducing the likelihood or impact of the risk through controls.
• Avoid: Eliminating the activity or condition that creates the risk.

• If the hashes match, the software has likely not changed.
• If they differ, the software was modified or corrupted.

• Encryption: Protects confidentiality by making data unreadable; it does not primarily verify that software was unchanged.
• Baselines: Establish expected configurations or states, but hashing is the specific method for checking file integrity.
• Tokenization: Replaces sensitive data with non-sensitive tokens and is unrelated to software integrity.

• Reviewing and validating generated code
• Checking security, licensing, and quality concerns
• Testing the implementation
• Making the final design and coding decisions

• A: Copilot is not a complete replacement for developers.
• C: Human input, review, and oversight are still required.
• D: Copilot Chat supports many tasks beyond debugging, including explanation, generation, refactoring, and testing assistance.

• Documented and evaluated
• Assessed for security, cost, and operational impact
• Reviewed and approved by the appropriate personnel
• Tested before implementation
• Tracked with version history and rollback procedures

• Risk management process: May help assess the issues, but it does not authorize and manage design changes.
• Product design process: Applies primarily while creating a new design.
• Design review process: Normally evaluates a design before release; this design is already released.

• s3:GetObject for the relevant objects
• s3:ListBucket if listing is required
• Appropriate bucket and object resource permissions

• B: Making the bucket public is insecure and unnecessary.
• C: Prompt engineering cannot override AWS IAM or encryption permissions.
• D: Data sensitivity does not determine whether the role can access it.

• Prevention costs: Avoiding defects, such as staff training and improved product design. The company has invested in these.
• Appraisal costs: Detecting defects before products reach customers, such as inspection and testing. The planned batch sampling has not been implemented.
• Internal failure costs: Correcting defects found before delivery.
• External failure costs: Dealing with defects after delivery, such as refunds, replacements, complaints and lost sales.

• A — Too infrequent: Formal strategies are often reviewed only every three to five years. This can make the organisation slow to respond to rapid changes in technology, competitors, regulation or customer needs.

• C — Relies on predicting the future: The approach assumes senior managers can make reasonably reliable forecasts and assumptions. In uncertain environments, these assumptions may quickly become invalid.

• E — Can restrict radical innovation: Formal planning tends to favour existing information, established objectives and incremental improvements. This may discourage experimental or highly innovative strategies that emerge from lower levels of the organisation.

• B concerns the difficulty of achieving competitive advantage through core competences when competing with focused specialists. It is not specifically a drawback of the formal top-down planning process.
• D is an activity organisations should undertake—continuous monitoring—not a drawback of the approach itself.

• Vulnerability scanner: Finds technical weaknesses in systems, applications, or devices. It does not usually analyze the entire supply chain.
• Penetration test: Simulates attacks against a defined target to identify exploitable weaknesses. Its scope is narrower.
• SCAP (Security Content Automation Protocol): Provides standardized formats and methods for automating security configuration and vulnerability checks, rather than mapping the full supply chain.

1. Product + ProductSubCategory: Inner join

1. Result + ProductCategory: Left outer join

• Virtual machine disks
• Databases
• Storage accounts
• File systems

• Site-to-site VPN: protects data moving between networks
• HTTPS: protects data moving between a client and website
• Encrypted email: generally protects the message while being transmitted

• At rest = stored data
• In transit = moving data
• In use = data currently being processed by a system

• IaaS: You deploy and manage virtual machines, including the operating system and installed software. Azure manages the physical datacenter, hosts, and networking infrastructure.
• PaaS: Azure manages the infrastructure and operating system, while you deploy and manage your application code. Examples include Azure App Service and Azure Functions.