Salesforce CRT-251 Exam Prep
Certified Sales Cloud Consultant (Page 20 )

• Accept: Acknowledging the risk without taking additional action.
• Transfer: Shifting responsibility or financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reducing the likelihood or impact of the risk through controls.
• Avoid: Eliminating the activity or condition that creates the risk.

1. x = -100
2. -100 < x < 100
3. 100 = x < 1000
4. x = 1000

• -500 ? class 1
• 0 ? class 2
• 100 ? class 3
• 1000 ? class 4

• 16GB RAM: A 64-bit OS is needed to use more than roughly 4GB effectively, but RAM capacity does not prove the CPU supports 64-bit operation.
• 500GB HDD: Storage capacity has no bearing on OS architecture.
• 1Gbps Ethernet: Network speed is unrelated to CPU architecture.

• A: Describes a broad purpose and direction, but is not the specific CIMA definition.
• C: “Scoping out” activities is too vague and incomplete.
• D: Combines long-term goals, strategies and policies, but describes a wider strategic-planning statement rather than the definition of strategy itself.

• Existing expected ROI: 15%
• New project ROI: 14%
• Cost of capital: 12%

• Project return = 14%
• Cost of capital = 12%
• It earns 2% more than the cost of capital, so it should increase shareholder value.

• C — Some risks cannot be eliminated.

• D — Accepting residual risk does not imply recklessness.

• E — Most companies in this industry will say something similar.

• Vulnerability scanner: Finds technical weaknesses in systems, applications, or devices. It does not usually analyze the entire supply chain.
• Penetration test: Simulates attacks against a defined target to identify exploitable weaknesses. Its scope is narrower.
• SCAP (Security Content Automation Protocol): Provides standardized formats and methods for automating security configuration and vulnerability checks, rather than mapping the full supply chain.

• CCTV system — Detective control: Cameras monitor and record activity, helping identify or investigate security incidents after—or while—they occur.
• Signs about being filmed — Deterrent control: The signs discourage people from attempting unauthorized or criminal activity because they know surveillance is present.

• Preventive: Stops an incident from occurring, such as a lock or access-control system.
• Corrective: Restores systems after an incident.
• Directive: Instructs people to behave in a certain way, such as a security policy.
• Compensating: Provides an alternative control when the preferred control cannot be implemented.

• Authentication — verifies who the user is.
• Authorization — determines what the authenticated user is allowed to access.
• Accounting — records session activity, such as login time and resource usage.

• CIA — confidentiality, integrity, and availability; core security objectives.
• ACL — access control list; rules that permit or deny traffic or access.
• PEM — Privacy Enhanced Mail, an older email security standard.

• C: Develop the rule in the Rules Editor, define the events, match, and condition sections, then use the test rule feature. This directly validates the YARA-L rule without enabling it in production.
• A: UDM Search can help investigate data and refine filters, but it does not fully test YARA-L logic—especially complex event joins, match windows, and conditions.

• Due diligence: Investigating and evaluating a third party before entering into or continuing a business relationship.
• Attestation: An independent party provides assurance about an organization’s claims or controls. A SOC 2 examination is an example of an attestation engagement, but the analyst requesting and reviewing the report is performing due diligence.
• Internal audit: Reviews the organization’s own internal controls.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.

• Employees can use approved devices from remote locations or worldwide offices.
• Users do not need to carry or insert extra hardware.
• It helps prevent account takeovers from unknown devices.

• Geotagging: Restricts access based on location, which could interfere with remote work and travel.
• Smart cards: Require additional physical equipment and card readers.
• Time-based logins: Limit access according to time but do not strongly bind access to an authorized user device.

• Maintain head office control: Transfer pricing generally supports decentralisation rather than direct head-office control.
• Establish centralised decision making: This conflicts with divisional autonomy.
• Develop a top-down culture: Transfer pricing is intended to support empowered divisions and goal congruence, not impose purely top-down management.

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but it is not the primary control for switch-port MAC learning.
• NGFW: Protects at network boundaries but does not directly limit MAC addresses learned on access ports.

• Sensitive document shared during a Teams chat: Teams chat
• Sensitive document stored/shared in a Teams channel: Teams channel messages

• Files shared in a chat are generally stored in the sender’s OneDrive, but the relevant DLP context is the Teams chat message and its attachment.
• Files shared in a channel are stored in the team’s SharePoint site, but the relevant context is the Teams channel message.
• The DLP rule can then use an action such as restrict access to the content to prevent guest users from opening the sensitive document.

• A — Correct: Flow Builder is declarative and visual, so administrators and other non-developers can participate in designing and improving business processes without writing Apex.
• D — Correct: Flow Builder provides visual debugging tools, allowing an admin to test paths, inspect variable values, and identify where a specific business case fails.
• E — Correct: A flow’s visual structure documents the logic and makes later maintenance easier than reading and updating custom Apex code.

• B — Incorrect: Flow debugging does not attach a debugger to live customer sessions. The admin uses Flow Builder’s debug functionality with test inputs; this is not live-session debugging and should not be used to monitor real customer transactions.

• Confirm the required columns and data types
• Identify the target/label column
• Handle missing or duplicate records if present
• Transform data into a suitable format
• Split it into training and validation/test datasets

1. Prepare the training data
2. Select an algorithm or configure AutoML
3. Train the model
4. Evaluate its performance
5. Tune hyperparameters if needed
6. Deploy the model

• Security controls
• Processes and procedures
• Compliance evidence
• Performance against contractual requirements

• Service-level agreement (SLA): Defines expected service performance, such as uptime and response times.
• Memorandum of agreement (MOA): Documents a general agreement between parties, but does not necessarily provide audit rights.
• Supply chain analysis: Identifies risks across suppliers and dependencies, but is not a contractual mechanism for reviewing vendor controls.

• ARP poisoning: Redirects or intercepts local network traffic; it would more likely affect communication paths or cause man-in-the-middle behavior.
• Jamming: Interferes with wireless signals. The scenario does not indicate a wireless outage.
• Kerberoasting: Attempts to obtain service-account password hashes from Kerberos; it is a credential attack, not typically a direct service outage.

• Valor maior: mais aderência às instruções e aos detalhes descritos.
• Valor menor: mais liberdade criativa e resultados potencialmente mais variados.
• Valor excessivamente alto: pode causar artefatos ou imagens menos naturais.

• Aumentar o número de passos de geração: pode melhorar qualidade e refinamento, mas não é o principal controle de especificidade do prompt.
• MASK_IMAGE_BLACK: relaciona-se ao uso de máscara em geração ou edição de imagens, não à especificidade textual.
• Prompt strength: é mais associado à força do prompt em processos como image-to-image; nesta questão, o parâmetro diretamente ligado à aderência textual é o CFG scale.

• B — Reviewing the strategy: Usually performed by a security steering committee or other governance body.
• C — Communicating the strategy: The security manager may help communicate it, but communication is not the primary governance responsibility tested here.
• D — Approving the strategy: Approval belongs to executive management or the appropriate governing authority, not the person who develops it.

• Accept: Acknowledge the risk and take no additional action.
• Transfer: Shift the risk or financial impact to another party, such as through insurance or a contract.
• Mitigate: Reduce the likelihood or impact using controls, such as firewalls, training, or backups.
• Avoid: Eliminate the activity that creates the risk.

• A — If there is no demand, there should be no production.

• B — Not all sales equal profit.

• C — Stocking up on inventory is bad for business.

• D — All costs, except materials, are considered fixed.

• E — Departments should operate at full capacity regardless of bottlenecks.

• CSIRT: A team that responds to and manages security incidents.
• CVSS: A scoring system for rating the severity of vulnerabilities.
• SOAR: A technology platform for automating and coordinating security operations and incident response.

• Future costs — Only costs occurring in the future can be affected by the investment decision. Past costs are sunk and irrelevant.
• Incremental costs — These are additional costs caused by choosing the investment. They are relevant because they differ between alternatives.
• Cash flows — Capital investment decisions are based on future cash inflows and outflows, usually discounted to present value.

• Committed costs have already been agreed or incurred and generally cannot be changed by the decision.
• Unavoidable costs will arise regardless of which option is selected, so they do not affect the choice.

• Works across SaaS and internal applications: TOTP is widely supported by authentication systems and can be integrated into many applications.
• Device manufacturer agnostic: A hardware token or authenticator application can generate the code without depending on a specific computer or phone manufacturer.
• Offline capability: The code is generated locally using a shared secret and the current time; an internet connection or cellular service is not required.

• Username and password: May work offline but provides weaker authentication and does not meet the intended improvement in security.
• Biometrics: Can depend on device hardware, operating-system support, and enrollment mechanisms.
• SMS verification: Requires cellular connectivity and is vulnerable to threats such as SIM swapping.

1. Select Exchange email as a location.
2. Use the built-in Azure Storage Account key sensitive information type as the condition.
3. Configure the DLP action to encrypt the email—for example, using Microsoft Purview Message Encryption.

• Suspended an operator who refused to use unsafe equipment.
• Paid another operator a bonus for using it.
• Prioritised short-term productivity over employee safety.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — The factory’s safety record is likely to be poor.

• Documented and evaluated
• Assessed for security, cost, and operational impact
• Reviewed and approved by the appropriate personnel
• Tested before implementation
• Tracked with version history and rollback procedures

• Risk management process: May help assess the issues, but it does not authorize and manage design changes.
• Product design process: Applies primarily while creating a new design.
• Design review process: Normally evaluates a design before release; this design is already released.

• Identity provider (IdP): Authenticates users and asserts their identity.
• Service provider (SP): The application being accessed—in this case, Salesforce/the employee portal.
• Identity store: A directory that stores user identities, such as Active Directory.
• Authentication store: A system used to validate credentials.

• IaaS: você gerencia a VM e o sistema operacional.
• PaaS: o Azure gerencia a infraestrutura; você se concentra no aplicativo.

• Documented and formally requested
• Analyzed for security, cost, and operational impact
• Reviewed and approved by the appropriate personnel
• Tested before implementation
• Tracked and reversible if problems occur

• Risk management process: Identifies and evaluates risk, but does not directly authorize design changes.
• Product design process: Applies primarily while creating or developing the product.
• Design review process: May have identified the issues, but the next step for changing an already released design is controlled change management.

• IaaS: You deploy and manage virtual machines, including the operating system and installed software. Azure manages the physical datacenter, hosts, and networking infrastructure.
• PaaS: Azure manages the infrastructure and operating system, while you deploy and manage your application code. Examples include Azure App Service and Azure Functions.

• Correct exam answer: A — HKEY_LOCAL_MACHINE
• The relevant location is associated with HKEY_LOCAL_MACHINE\SAM.
• The SAM does not store passwords in plain text; it stores password hashes.

• HKEY_CURRENT_USER contains settings for the currently logged-in user, not the account-password database.
• HKEY_USERS contains user profiles and settings loaded for users.
• HKEY_CURRENT_CONFIGURATION contains hardware/profile configuration information.

• D — Managers focus on keeping costs low in the short term to maximise profits.

• E — Managers are given incentives to meet or undercut budgets.

• F — Managers delegate responsibility simply to reduce their workload.

• Determining ISP-assigned address space: Usually involves public reconnaissance, such as WHOIS or regional Internet registry information.
• Bypassing DNS sinkholing: Would require evidence that malicious domains are resolving outside the organization’s sinkhole controls.
• Achieving initial access: DNS log entries alone do not demonstrate compromise or entry.
• Exfiltrating data: DNS tunneling generally involves repeated queries containing encoded or unusually long data, not merely internal host discovery.

• Crash cart: Provides local physical access, not remote access.
• Jump box: A secured intermediary used to reach devices over the normal network; it may be inaccessible if the appliance has not booted.
• Secure Shell (SSH): Requires the device’s operating system and network services to be running properly.

• A: It allows for branching and merging...

• C: It allows multiple engineers to work against the same code and configuration files and manage differences and conflicts.

• B: Build automation and infrastructure provisioning are handled by CI/CD and automation tools, not by version control alone.
• D: User Stories and backlogs are managed by project-management tools.
• E: Version control stores and tracks code, but it does not itself ensure that developers write effective unit tests.

• Transfer — przeniesienie skutków lub kosztów ryzyka na inna organizacje, np. przez ubezpieczenie lub umowe.
• Akceptacja — firma swiadomie przyjmuje ryzyko bez dodatkowych dzialan.
• Mitigacja — zmniejszenie prawdopodobienstwa wystapienia ryzyka lub jego wplywu, np. przez wdrozenie kontroli bezpieczenstwa.
• Unikanie — calkowite wyeliminowanie ryzykownej dzialalnosci.

• VLAN 10 for data
• VLAN 20 for voice

• A: Describes physical trunking or logical switch ports, not an SVI.
• B: An SVI can provide management access, but that is only one use—not the best description here.
• D: SVI use is not related to running out of physical ports.

1. Create a temporary Onboarding OU.
2. Move the new account into it.
3. Move the restrictive SCPs from the organization root to the Production OU.
4. Allow the account to update AWS Config.
5. Move the account into Production after onboarding.

• An SCP attached at the organization root applies to every account and OU beneath it.
• An SCP attached to the Production OU applies only to accounts in that OU.
• Therefore, moving the restrictive SCP from the root to Production temporarily exempts the onboarding account without weakening the policies for existing production accounts.
• Once onboarding is complete, moving the account into Production subjects it to the normal restrictions.

1. Identify the fact table

• Records something that happened, such as a sale, test, appointment, or measurement
• Contains foreign keys to other tables
• Contains measures or numeric results
• Has many rows

2. Identify a dimension table

• Describe people, products, dates, locations, or departments
• Contain descriptive columns
• Are referenced by the fact table
• Have fewer rows than the fact table

3. Identify the surrogate key

• System-generated
• Unique within the dimension
• Often named PatientKey, CustomerKey, or similar
• Usually an integer
• Not meaningful outside the model

• Database data: Aggregates are used to retrieve structured data, commonly from entities and database sources.
• Screen scope: A Screen Aggregate belongs to the screen where it is defined and is not directly reusable as a screen-level aggregate elsewhere.
• Asynchronous and parallel execution: Multiple Screen Aggregates can run asynchronously and in parallel, helping the screen load data efficiently.

• vBond — orchestration plane: Authenticates devices, helps them discover each other, and assists with NAT traversal and initial control-connection setup.
• vSmart — control plane: Distributes routing and policy information to WAN Edge devices using the overlay control plane.
• vManage — management plane: Provides centralized configuration, monitoring, and orchestration through its GUI/API.
• WAN Edge — data plane: Forwards user traffic across the SD-WAN fabric.

• Domínios personalizados.
• Armazenamento suficiente.
• Instâncias dedicadas.
• Balanceamento de carga.
• Menor custo entre os planos que atendem a tudo.

• The identified risk
• Its likelihood and potential impact
• The person or team responsible for handling it
• The response or treatment plan
• Risk thresholds, such as when escalation or action is required
• Current status and review dates

• Risk tolerance: The amount of risk an organization is willing to accept; it is a concept or limit, not usually the primary documentation.
• Risk transfer: Moving the responsibility or financial impact of a risk to another party, such as through insurance.
• Risk analysis: The process of evaluating risk likelihood and impact.

• B. The community must be built with the Customer Account Portal template.

• C. An experience ID (expid) or placeholder parameter must be used in the URL.

• A: The Visualforce + Salesforce Tabs template does not provide this dynamic branding capability.
• D: An external CMS is not required. The branding configuration is handled within Salesforce Experience Cloud.

• Digitally signing the software: Verifies authenticity and integrity. It does not hide how the software works.
• Limiting third-party libraries: May reduce dependencies and attack surface, but does not directly prevent reverse engineering.
• Using compile flags: Some compiler options can remove debugging information or optimize code, which may provide limited protection, but this is not the primary technique identified for preventing reverse engineering.

• Internal hostnames and subdomains
• Network structure and naming conventions
• Servers and services
• Relationships between systems

• Determining ISP-assigned address space: Usually involves external registration and DNS information, not internal host discovery.
• Bypassing DNS sinkholing: Would require evidence that malicious DNS requests avoided redirection.
• Initial access: DNS queries alone do not show that the attacker gained access.
• Exfiltrating data: DNS tunneling can do this, but the snippet would typically show encoded or unusually long DNS queries.

• The type of change: standard, normal, or emergency
• The risk, impact, and complexity
• The change model being used

• A standard change may be pre-authorized through its change model.
• A normal change may require assessment and approval by an appropriate change authority.
• An emergency change may be authorized by an emergency change authority, often using an expedited process.

• Change authorities are not only needed for emergency changes.
• They are not assigned only when a change is deployed.
• They are not only required for normal changes.